Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computational Method Validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Modeling the direct sun component in buildings using matrix algebraic approaches: Methods and validation

Simulation tools that enable annual energy performance analysis of optically-complex fenestration systems have been widely adopted by the building industry for use in building design, code development, and the development of rating and certification programs for commercially-available shading and daylighting products. The tools rely on a three-phase matrix operation to compute solar heat gains, using as input low-resolution bidirectional scattering distribution function (BSDF) data (10–15° angular resolution; BSDF data define the angle-dependent behavior of light-scattering materials and systems). Measurement standards and product libraries for BSDF data are undergoing development to support solar heat gain calculations. Simulation of other metrics such as discomfort glare, annual solar exposure, and potentially thermal discomfort, however, require algorithms and BSDF input data that more accurately model the spatial distribution of transmitted and reflected irradiance or illuminance from the sun (0.5° resolution). This study describes such algorithms and input data, then validates the tools (i.e., an interpolation tool for measured BSDF data and the five-phase method) through comparisons with ray-tracing simulations and field monitored data from a full-scale testbed. Simulations of daylight-redirecting films, a micro-louvered screen, and venetian blinds using variable resolution, tensor tree BSDF input data derived from interpolated scanning goniophotometer measurements were shown to agree with field monitored data to within 20% for greater than 75% of the measurement period for illuminance-based performance parameters. The three-phase method delivered significantly less accurate results. We discuss the ramifications of these findings on industry and provide recommendations to increase end user awareness of the current limitations of existing software tools and BSDF product libraries.

14 SOLAR ENERGY↗

A fission matrix based validation protocol for computed power distributions in the advanced test reactor

The Idaho National Laboratory (INL) has been engaged in a significant multi year effort to modernize the computational reactor physics tools and validation procedures used to support operations of the Advanced Test Reactor (ATR) and its companion critical facility (ATRC). Several new protocols for validation of computed neutron flux distributions and spectra as well as for validation of computed fission power distributions, based on new experiments and well-recognized least-squares statistical analysis techniques, have been under development. In the case of power distributions, estimates of the a priori ATR-specific fuel element-to-element fission power correlation and covariance matrices are required for validation analysis. A practical method for generating these matrices using the element-to-element fission matrix is presented, along with a high-order scheme for estimating the underlying fission matrix itself. The proposed methodology is illustrated using the MCNP5 neutron transport code for the required neutronics calculations. The general approach is readily adaptable for implementation using any multidimensional stochastic or deterministic transport code that offers the required level of spatial, angular, and energy resolution in the computed solution for the neutron flux and fission source. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Improved Guarantees for Optimal Nash Equilibrium Seeking and Bilevel Variational Inequalities

We consider a class of hierarchical variational inequality (VI) problems that subsumes VI-constrained optimization and several other problem classes, including the optimal solution selection problem and the optimal Nash equilibrium (NE) seeking problem. Our main contribution is threefold. (i) We consider bilevel VIs with monotone and Lipschitz continuous mappings and devise a single-timescale iteratively regularized extragradient method, named IR-EG 𝚖,𝚖 . We improve the existing iteration complexity results for addressing both bilevel VI and VI-constrained convex optimization problems. (ii) Under the strong monotonicity of the outer-level mapping, we develop a method named IR-EG 𝚜,𝚖 and derive faster guarantees than those in (i). We also study the iteration complexity of this method under a constant regularization parameter. These results appear to be new for both bilevel VIs and VI-constrained optimization. (iii) To our knowledge, complexity guarantees for computing the optimal NE in nonconvex settings do not exist. Motivated by this lacuna, we consider VI-constrained nonconvex optimization problems and devise an inexactly projected gradient method, named IPR-EG, where the projection onto the unknown set of equilibria is performed using IR-EG 𝚜,𝚖 with a prescribed termination criterion and an adaptive regularization parameter. We obtain new complexity guarantees in terms of a residual map and an infeasibility metric for computing a stationary point. Here, we validate the theoretical findings using preliminary numerical experiments for computing the best and the worst NEs.

bilevel optimization↗

Computational Fluid Dynamics Simulations to Predict Oxidation in Heat Recovery Steam Generator Tubes

Heat Recovery Steam Generators (HRSGs) are widely used across United States in combined cycle power plants to recover waste heat from the gas turbine (GT). HRSGs are used either to generate electricity or to produce process steam for industrial applications. The primary components of HRSG consists of a duct and a heat exchanger (HX). It is known across the power industry that the high temperature oxidation and ensuing exfoliation problem is a major cause for the damage of HX materials of HRSG. Alloys and/or coatings that can prevent or mitigate oxidation are very expensive, therefore they must be used or applied on the select regions of the HX tubes where the tendency of oxide formation is the highest. The main goal of this project is to identify such regions through Computational Fluid Dynamics (CFD) simulations. Therefore, in this work, we developed a CFD framework using commercial code StarCCM+ for the prediction of the fluid flow and heat transfer in a HRSG and associated oxidation inside the tubes of the HX. The developed CFD framework was verified and validated with experimental data before deployment. We also developed an innovative method to model the effect of the fins on the heat transfer and the pressure drop using a porous media model (PMM) approach to keep the mesh size within reasonable limits. After validation, we performed high-fidelity CFD simulations of a real-scale HRSG using the PMM, with High Performance Computing (HPC) resources of ORNL. From the simulation results, we acquired oxide thickness maps for all the tubes of the select HX sections of HRSG prone to oxidation. These oxide maps can inform regions of the HX tubes that requires oxide-resistant coatings, thereby guiding engineers for cost-efficient manufacturing of the HX that can combat oxidation in HRSGs.

36 MATERIALS SCIENCE↗

Autonomous aerial flight path inspection using advanced manufacturing techniques

Robotic systems have shown capabilities to perform inspection tasks in dangerous and difficult-to-access environments, such as those found in different components of power plants. However, most of the current robotic inspection technology is designed for specific components. Aerial robots, commonly termed as Drones, have raised an option to inspect a wider range of structural components. Nevertheless, current aerial inspecting technology still relies on a human pilot with limited line of sight, field of view and a reduced perception as the drone flies away, which prevents performing close-quarter inspection in intricate, structurally complex and GPS-denied environments. This work introduces offline inspection path generation methods based on robotics-integrated to manufacturing techniques. One method uses computer-aided manufacturing (CAM) techniques and the other an additive manufacturing (AM) approach to generate the flight path. That is to say, the drone would fly along the path described by a 3D (Three Dimensional) printer’s extruder or a CNC (Computer Numerical Control) machining tool, enabling to fly very close the structure even in physical structures with a complex geometry. Once the trajectories are generated, they are introduced for its validation in the Gazebo robotics simulator. Simulation results demonstrate the proper performance of the method and confirm that this approach can be used for close inspection of structural components.

42 ENGINEERING↗

Openpronghorn

OpenPronghorn is a simulation tool specifically tailored for modeling thermal-hydraulic phenomena in advanced nuclear reactors. It is built on the Multiphysics Object-Oriented Simulation Environment (MOOSE), an open-source platform that facilitates the development of high-performance scientific computing applications. OpenPronghorn solves the Navier-Stokes equations, which describe the conservation of mass, momentum, and energy in fluid flows, using the finite volume numerical method. The code supports a wide range of fluid flow conditions that are applicable to nuclear reactors, including incompressible and weakly compressible flows, as well as single-phase and multiphase flows. It is capable of modeling diverse flow regimes, including laminar and turbulent flows, using various turbulence models such as the standard k-epsilon models, the v2f model, and the mixing length model. For multiphase flows, OpenPronghorn employs a mixture a Eulerian modeling approach with mixture, drift-flux, and full Eulerian models, and includes open-sourced interfacial transfer correlations for drag, exchange, and heat transfer coming from the scientific literature. OpenPronghorn's modular design allows it to handle multiscale simulations, ranging from detailed Reynolds-Averaged Navier Stokes (RANS) simulations to coarse-mesh and lumped parameter models. This flexibility enables users to perform high-fidelity simulations of specific reactor components as well as system-level analyses of entire reactor circuits. The code can be coupled with other MOOSE-based tools using the MultiApp system, allowing for the transfer of coupling quantities such as mass flow rates, heat fluxes, and boundary conditions between different simulation scales. One of the main features of OpenPronghorn is the it includes built-in validation cases from the open-source scientific literature and supports the implementation of user-defined models and correlations through MOOSE's FunctorMaterial system. OpenPronghorn is designed to be computationally efficient, leveraging the SIMPLE projection method for large-scale problems, and can be run on high-performance computing systems to handle the extensive computational demands of detailed reactor simulations. Overall, OpenPronghorn is a versatile and robust tool that provides critical insights into the thermal-hydraulic behavior of advanced nuclear reactors, supporting the design, safety, and optimization of next-generation nuclear energy systems.

Retamales, Mauricio Eduardo Tano [Idaho National L↗

Coupling methods between finite element-based Boussinesq-type wave and particle-based free-surface flow models [Coupling methods between finite element-based Boussinesq-typewave and particle-based free-surface flow models]

We develop one-way coupling methods between a Boussinesq-type wave model based on the discontinuous Galerkin finite element method and a free-surface flow model based on a mesh-free particle method to strike a balance between accuracy and computational cost. In our proposed model, computation of the wave model in the global domain is conducted first, and the nonconstant velocity profiles in the vertical direction are reproduced by using its results. Computation of the free-surface flow is performed in a local domain included within the global domain with interface boundaries that move along the reproduced velocity field in a Lagrangian fashion. To represent the moving interfaces, we used a polygon wall boundary model for mesh-free particle methods. Verification and validation tests of our proposed model are performed, and results obtained by the model are compared with theoretical values and experimental results to show its accuracy and applicability.

97 MATHEMATICS AND COMPUTING↗

A Vehicle-to-Grid planning framework incorporating electric vehicle user equilibrium and distribution network flexibility enhancement

The rapid surge in electric vehicle (EV) adoption, coupled with advancements in charging technologies, emphasizes the critical necessity for expanding EV recharging infrastructure. Simultaneously, the Distribution Network (DN) encounters escalating challenges in meeting charging demand during peak traffic periods. Consequently, there is a mounting demand for the deployment of innovative Vehicle-to-Grid (V2G) technologies to augment the DN’s flexibility in power dispatch and alleviate travel costs for EV users. Hence, this paper proposes an EV-user-equilibrium-(UE)-constrained V2G planning framework that enhances flexibility in the DN. The framework aims to ascertain the optimal placement and capacity of EV charging stations (EVCSs) and V2G charging piles within the Transportation Network (TN). It takes into account the equilibrium condition stemming from competitive EV charging and routing behaviors alongside the optimal expansion of DN energy resources to accommodate the electricity supplied by the V2G piles. This study commences by analyzing EV drivers’ travel decisions, considering the influence of charging and V2G pile locations and sizes. Subsequently, we tackle the Traffic Assignment Problem with User Equilibrium (TAP-UE) model to characterize the steady-state traffic flow distribution of EVs. Following this, we formulate the optimization model for the Coordinated Power and Transportation Network (CPTN), which encompasses the optimal expansion of DN facilities and traffic flow regulation under UE conditions. To mitigate the computational complexity associated with the V2G planning model, we introduce a series of linearization methods to obtain a manageable Mixed-Integer Linear Programming (MILP) solution. Finally, to validate the efficacy of our proposed planning framework, we apply it to two test systems, including a real-world case study. Through these case studies, we explore the necessity and potential benefits of V2G technologies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Multiphase Species Transport Modeling for Molten Salt Reactors in the System Analysis Module: Generation, Decay, Deposition, and Extraction of Insoluble Fission Products

With the increase of interests in the design and deployment of advanced reactor systems, a desire for simulation tools supporting system analysis of reactor operation and safety is rising. Molten salt reactors (MSRs), one of the advanced reactor systems, utilize liquid fused salt fuel as both coolant and fuel. During operation, MSR generates insoluble fission products, including noble metals and gases. The buildup of these species in fuel salt presents safety concerns as they may deposit on surfaces of critical components and produce excessive decay heat, causing the failure of system components. Timely removal of these noble metals and gases would ensure the safe operation of the reactor system. The dynamic nature of salt fuel system, involving the generation, decay, deposition, and extraction of noble metals and gases, calls for robust species transport models to facilitate system analysis and monitoring, and design of efficient species removal components. This paper concentrates on the development of a computational framework for species transport, consisting of multiphase transport model formulation, mass transfer between phases, numerical implementation in MOOSE environment, verification through Method of Manufacture Solutions (MMS) and validation against experimental data from the Molten Salt Reactor Experiment (MSRE). Integrating this framework into the System Analysis Module (SAM) code further enhances SAM’s capabilities for advanced reactor analysis in the future.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Probabilistic Resilience-Oriented Assessment Approach for Transmission Networks Under Wildfires

The rising threat of wildfires poses significant challenges to power transmission networks, particularly in areas prone to such disasters. Traditional approaches for wildfire risk assessment neglect some potential wildfire scenarios. Here, this paper introduces a probabilistic resilience-oriented assessment approach for power transmission networks to address this gap. Initially, a probabilistic wildfire model is developed to capture uncertainties in ignition, intensity, and fire spread. Next, a spatiotemporal fragility model is constructed to assess the impact of wildfires on transmission corridors, incorporating Thermal Aging (TA) and Dynamic Thermal Rate (DTR) change. Finally, a comprehensive resilience metric is defined to evaluate system performance, leveraging the fragility model to determine component and system-level resilience. The approach employs a combinatorial enumeration method to generate potential wildfire scenarios, enhanced by an impact-increment-based state enumeration (IISE) method for computational efficiency. The proposed method provides critical insights for identifying system vulnerabilities and developing robust strategies to protect transmission networks from wildfires. The efficacy of this approach is validated through extensive scenarios of the RTS-GMLC system across Southern California, Nevada and Arizona.

Vahedi, Soroush [Univ. of Connecticut, Storrs, CT ↗

Cone beam x-ray luminescence computed tomography: A feasibility study

Purpose: The appearance of x-ray luminescence computed tomography (XLCT) opens new possibilities to perform molecular imaging by x ray. In the previous XLCT system, the sample was irradiated by a sequence of narrow x-ray beams and the x-ray luminescence was measured by a highly sensitive charge coupled device (CCD) camera. This resulted in a relatively long sampling time and relatively low utilization of the x-ray beam. In this paper, a novel cone beam x-ray luminescence computed tomography strategy is proposed, which can fully utilize the x-ray dose and shorten the scanning time. The imaging model and reconstruction method are described. The validity of the imaging strategy has been studied in this paper. Methods: In the cone beam XLCT system, the cone beam x ray was adopted to illuminate the sample and a highly sensitive CCD camera was utilized to acquire luminescent photons emitted from the sample. Photons scattering in biological tissues makes it an ill-posed problem to reconstruct the 3D distribution of the x-ray luminescent sample in the cone beam XLCT. In order to overcome this issue, the authors used the diffusion approximation model to describe the photon propagation in tissues, and employed the sparse regularization method for reconstruction. An incomplete variables truncated conjugate gradient method and permissible region strategy were used for reconstruction. Meanwhile, traditional x-ray CT imaging could also be performed in this system. The x-ray attenuation effect has been considered in their imaging model, which is helpful in improving the reconstruction accuracy. Results: First, simulation experiments with cylinder phantoms were carried out to illustrate the validity of the proposed compensated method. The experimental results showed that the location error of the compensated algorithm was smaller than that of the uncompensated method. The permissible region strategy was applied and reduced the reconstruction error to less than 2 mm. The robustness and stability were then evaluated from different view numbers, different regularization parameters, different measurement noise levels, and optical parameters mismatch. The reconstruction results showed that the settings had a small effect on the reconstruction. The nonhomogeneous phantom simulation was also carried out to simulate a more complex experimental situation and evaluated their proposed method. Second, the physical cylinder phantom experiments further showed similar results in their prototype XLCT system. With the discussion of the above experiments, it was shown that the proposed method is feasible to the general case and actual experiments. Conclusions: Utilizing numerical simulation and physical experiments, the authors demonstrated the validity of the new cone beam XLCT method. Furthermore, compared with the previous narrow beam XLCT, the cone beam XLCT could more fully utilize the x-ray dose and the scanning time would be shortened greatly. The study of both simulation experiments and physical phantom experiments indicated that the proposed method was feasible to the general case and actual experiments.

60 APPLIED LIFE SCIENCES↗

Discerning Influences from Enthalpy and Entropy at Aqueous Interfaces Involved in Biomass Conversions in Porous Catalysts

Project Summary: The goal in this proposal is to learn how solvent influences the enthalpies and entropies of catalytic species in zeolite pores. Specifically, the physical, chemical, and structural features of solvent, catalytic species, and zeolite pores that determine enthalpies and entropies of solvation in solution phase biomass conversions will be interrogated using multiscale simulations and machine learning. Multiscale simulations are based off of existing strategies and employ quantum mechanics and classical molecular dynamics, providing an excellent balance between chemical accuracy and computational expense. They are capable of calculating enthalpies and entropies of solvation separately and have been validated in prior work to achieve high accuracy compared to their parent methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Tensor Network-Based Quantum Algorithm for the Nonlinear 1D Burgers' Equation

In this work, we implement a tensor network-based quantum algorithm to solve unsteady, nonlinear partial differential equations (PDEs). The challenge lies in how to effectively represent, encode, process, and evolve the nonlinear system of PDEs on quantum computers. We will discuss the new techniques using the compressible 1-dimensional (1D) Burgers' equation as an example, because it represents the fundamental nonlinear feature and yet removes certain complexity in physics, allowing us to focus on the design of quantum algorithms. Previous attempts to solve nonlinear PDEs in quantum computation have often involved storing multiple copies of solutions or employing linearizations. Neither is practical due to exponential scaling with evolution time or insufficient solution accuracy. Our framework is based on matrix product states (MPSs) and matrix product operators (MPOs). For example, the velocity field is represented by MPS, whereas the linear and nonlinear spatial differential terms of the velocity field are processed by MPOs. Our primary focus herein is to verify and validate the various tensor network components of the algorithm using solutions obtained by the classical algorithms on high performance computing (HPC) architectures. We use a classical time marching method to demonstrate the functionality of the tensor network operations to model the PDE and their robustness with the time evolution of the system. Our classical simulation results demonstrate the utility of tensor network-based operations in modeling nonlinear PDEs and highlight the necessity as well as potential advantages of using quantum simulations for these techniques.

Gopalakrishnan Meena, Murali [ORNL] (ORCID:0000000↗

Slowly oscillating lifting surfaces at subsonic and supersonic speeds.

The paper presents an unsteady aerodynamic influence coefficient method based on the low-frequency approximation. The influence coefficients are of a type which have been used to compute steady flow about wing-body combinations; therefore, the new method may be extended readily to low-frequency unsteady flow about wing-body combinations. The validity of the method is demonstrated by comparisons with numerical results from conventional, unsteady lifting surface methods. The method is valid for arbitrary wings in supersonic flow and for wings of finite span in subsonic flow. The method, when extended to include wing-body-tail interactions, will have important applications for predicting stability, control, and gust response characteristics of large airplanes. Dynamic stability derivatives and pressure distributions are given for several planforms. The comparison with either analytical or other well established numerical methods shows good agreement.-

Brune, G. W.↗

Thermoelastohydrodynamic analysis of an oil pumping ring seal

The selection and evaluation of the numerical methods used in the thermoelastohydrodynamic analysis of an oil pumping ring seal are described, and the results from test problems used to demonstrate the validity of the implementing computer program are presented. A sampling of predicted pumping ring performance values is compared with existing experimental data. Agreement between prediction and test performance is obtained, yielding detailed information concerning fluid and solid parameters.

Smith, P. J.↗

A new method for simulating atmospheric turbulence for rotorcraft applications

Simulation of atmospheric turbulence as seen by a rotating blade element involves treatment of cyclostationary processes. Conventional filtering techniques do not lend themselves well to the generation of such turbulence sample functions as are required in rotorcraft flight dynamics simulation codes. A method to generate sample functions containing second-order statistics of mean and covariance is presented. Compared to ensemble averaging involving excessive computer time, the novelty is to exploit cycloergodicity and thereby, replace ensemble averaging by averaging over a single-path sample function of long duration. The method is validated by comparing its covariance results with the analytical and ensemble-averaged results for a widely used one-dimensional turbulence approximation.

Prasad, J. V. R.↗

Further development towards a new virtual-pulse time integral methodology for general nonlinear transient thermal analysis

New developments describing the theoretical basis towards an effective virtual-pulse time integral procedure are presented for general nonlinear transient heat transfer problems. To validate the proposed methodology of computation, numerical test examples are given and comparisons are drawn with the implicit second-order accurate Crank-Nicolson technique. The proposed method shows superior or improved accuracy and stability characteristics for the models tested.

Tamma, K. K.↗

Incompressible Navier-Stokes Computations for the Development of a Ventricular Assist Device

An incompressible flow analysis code, INS3D, has been applied to the development of a mechanical heart assist device. The solution method is based on the artificial compressibility approach and uses an implicit-upwind differencing scheme together with a Gauss-Seidel line relaxation method. The equations are solved in steadily rotating reference frames and the centrifugal and the Coriolis force terms are included as source terms. The resulting computational procedure is validated for liquid rocket engine analysis and applied subsequently to analyze a Ventricular Assist Device (VAD). A new design configuration is developed which includes an inducer upstream of the impeller main blades, and substantial improvement is observed in the performance of the VAD.

Kiris, Cetin↗