Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Calcium phenylphosphonate as a host for 4-aminobenzoic acid-Synthesis, characterization, and cation adsorption from ethanol solution

Crystalline lamellar calcium phenylphosphonate retained 4-aminobenzoic acid inside its cavity without leaching. The intense infrared bands in the 1160-695 cm{sup -1} interval confirmed the presence of the phosphonate groups attached to the inorganic layer, with sharp and intense peaks in X-ray diffraction patterns, which gave basal distances of 1532 and 1751 pm for the original and the intercalated compounds, respectively. The thermogravimetric curves of both layered compounds showed the release of water molecules and the organic moiety in distinct stages, to yield a final Ca(PO{sub 3}){sub 2} residue. Solid-state {sup 31}P nuclear magnetic resonance spectra presented only one peak for the phenylphosphonate groups attached to the main inorganic polymeric structure near 12.4 ppm. The adsorption isotherms from ethanol gave the maximum adsorption capacities of 1.68 and 0.50 mmol g{sup -1} for copper and cobalt, respectively, whose average stability constants followed Co > Cu; the number of ligands was determined as four for both cations.

36 MATERIALS SCIENCE↗

Influence of oxygen on characteristics of Zn(O,S) thin films deposited by RF magnetron sputtering

Zn(O,S) thin films were successfully deposited by reactive sputtering using Ar and O{sub 2} gas mixtures at 473 K. X-ray diffraction patterns revealed that the well crystallized Zn(O,S) films were deposited with increasing oxygen concentration in O{sub 2}/Ar, resulting in a shift of the Zn peak of 28.5° to a higher angle, closer to the ZnO peak of 34.4°. Zn(O,S) films were composed of grains agglomerated from small particles, which grew gradually with increasing oxygen concentration. The depth profiles and energy dispersive spectroscopy results of the films indicated that the O/(O+S) ratio increased from 0.04 to 0.81, and all Zn(O,S) films were Zn rich with uniform concentrations of each component. X-ray photoelectron spectroscopy revealed that, as the oxygen concentration increased to 2%, the ZnS films were transformed to Zn(O,S) films via substitution of oxygen for sulfur.

36 MATERIALS SCIENCE↗

Low Temperature and Surfactant-Free Hydrothermal Synthesis of CoNi Nanoparticles: Structure, Microstructure, and Magnetic Properties

We report on the synthesis of Co{sub 30}Ni{sub 70} nanoparticles using hydrothermal method at low temperatures and short times (100 °C, 2 h) without any surfactant or external magnetic field. The effect of NaOH concentration on the crystal structure, microstructure, and magnetic properties of CoNi samples has been investigated by x-ray diffraction (XRD), scanning (SEM) and high-resolution transmission (HRTEM) electron microscopy, and vibrating sample magnetometry (VSM). From the Rietveld refinement of x-ray powder diffraction patterns, we have evidenced the coexistence of two phases with face-centered cubic (FCC) and hexagonal (HCP) crystal structures, being 12 nm and 3 nm, respectively, the values for the mean grain size of both phases. SEM images show that the basic microstructure is composed of quasi-spheres and a chain-like morphology appears with increasing the amount of NaOH. HRTEM images evidence the formation of such chains, and confirm the coexistence of FCC and HCP phases. The magnetic hysteresis loops show a clear dependence of the coercivity on the particle morphology indicating the role played by the magnetic shape anisotropy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural studies of AgNbO{sub 3} ceramic by using complex impedance spectroscopy

Lead-free piezoelectric silver niobate ceramic was synthesized by conventional solid state route. Room temperature X-ray diffraction pattern revealed that the sample crystallizes in single phase orthorhombic perovskite structure. Scanning electron micrographs of AgNbO{sub 3} ceramic showed that the average grain size is in the range 2–3 µm. The electrical properties were investigated by using impedance spectroscopy. Appearance of single semicircular arc in the Nyquist plot indicated the presence of grain contribution in the sample. Single RC parallel circuit model was employed to extract bulk capacitance (C{sub b}), resistance (R{sub b}) and electrical conductivity (σ{sub b}). The activation energy calculated from impedance and modulus data indicate that same types of charge carriers (oxygen vacancy movements) are responsible for conduction and relaxation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal thin film growth on multimetallic surfaces: From quaternary metallic glass to binary crystal

The work presented in this thesis mainly focuses on the nucleation and growth of metal thin films on multimetallic surfaces. First, we have investigated the Ag film growth on a bulk metallic glass surface. Next, we have examined the coarsening and decay of bilayer Ag islands on NiAl(110) surface. Third, we have investigated the Ag film growth on NiAl(110) surface using low-energy electron diffraction (LEED). At last, we have reported our investigation on the epitaxial growth of Ni on NiAl(110) surface. Some general conclusions can be drawn as follows. First, Ag, a bulk-crystalline material, initially forms a disordered wetting layer up to 4-5 monolayers on Zr-Ni-Cu-Al metallic glass. Above this coverage, crystalline 3D clusters grow, in parallel with the flatter regions. The cluster density increases with decreasing temperature, indicating that the conditions of island nucleation are far-from-equilibrium. Within a simple model where clusters nucleate whenever two mobile Ag adatoms meet, the temperature-dependence of cluster density yields a (reasonable) upper limit for the value of the Ag diffusion barrier on top of the Ag wetting layer of 0.32 eV. Overall, this prototypical study suggests that it is possible to grow films of a bulk-crystalline metal that adopt the amorphous character of a glassy metal substrate, if film thickness is sufficiently low. Next, the first study of coarsening and decay of bilayer islands has been presented. The system was Ag on NiAl(110) in the temperature range from 185 K to 250 K. The coarsening behavior, has some similarities to that seen in the Ag(110) homoepitaxial system studied by Morgenstern and co-workers. At 185 K and 205 K, coarsening of Ag islands follows a Smoluchowski ripening pathway. At 205 K and 250 K, the terrace diffusion limited Ostwald ripening dominants. The experimental observed temperature for the transition from SR to OR is 205 K. The SR exhibits anisotropic island diffusion and the OR exhibits 1D decay of island length while keeping the corresponding island width constant. Third, LEED indicates that, up to about 6 BL (12 ML), the Ag film adopts the (110) structure on lattice matched NiAl(110) surface, supporting the previous assignment based upon island heights measured in STM. Starting at 4.5 to 6 BL, (111) diffraction pattern is detected. This is also in agreement with previous STM study. Careful examinations of the LEED patterns reveal the slight difference in lattice constants between bulk Ag and bulk NiAl. At last, we performed STM studies of Ni deposition on NiAl(110) in the temperature range from 200 K to 400 K. Ni forms 'dense' Ni(100)-like islands on NiAl(110) with a zig-zag shaped stripe feature which is probably due to strain relief. DFT analysis provides insights into the island growth shapes, which are rationalized by the thermodynamics and kinetics of the film growth process. For thick Ni films (coverage exceeding 6 ML), a Ni(111)-like structure developed. Traditional MF theory is applied to analyze island density at 200 K. Deviation from homogeneous nucleation behavior for island size distribution and island density reveals the presence of heterogeneous nucleation mediated by the Ni antisite point defects on NiAl(110) surface.

36 MATERIALS SCIENCE↗

The effect of refluxing on the alkoxide-based sodium potassium niobate sol-gel system: Thermal and spectroscopic studies

A study on the effects of prolonged heating under reflux conditions of up to 70 h on alkoxides of sodium, potassium and niobium dissolved in 2-methoxyethanol for the synthesis of sols of composition Na{sub 0.5}K{sub 0.5}NbO{sub 3} (NKN) has been carried out using combined thermogravimetric-Fourier transform infrared spectroscopic analyses. Extended refluxing increases the homogeneity of the Na{sub 0.5}K{sub 0.5}NbO{sub 3} (NKN) system. Spectroscopic analyses on the non-refluxed and 70 h refluxed NKN gels reveal the existence of inorganic hydrated carbonates and bicarbonates, which we propose arise from the hydration and carbonation of the samples on standing in air. The X-ray diffraction patterns of these two types of gels show orthorhombic NKN phase evolutions at higher temperatures. -- Graphical abstract: Total organic evolution plots over time for NKN dried gels obtained under different refluxing times show different thermochemical behaviours and these were investigated by thermal and spectroscopic analysis tools to find a correlation between the extent of -M-O-M- chain link formation and the amount of solvent vapour (methoxyethanol) evolution. Display Omitted Research highlights: > Prolonged refluxing of sol-gel NKN precursor solutions improves final properties of an NKN system. > An NKN process thermo-chemistry with thermal and spectroscopic analysis tools was explored. > An FTIR of NKN gels reveals tendency of NKN systems for rehydration and recarbonation on standing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative study of NiFe{sub 2−x}Al{sub x}O{sub 4} ferrite nanoparticles synthesized by chemical co-precipitation and sol–gel combustion techniques

Graphical abstract: AFM images of NiFe{sub 2}O{sub 4} ferrite nanoparticles at room temperature synthesized by sol–gel technique. Highlights: ► Particle size reduces to less than 30 nm. ► DC electrical resistivity increases with substitution of Cr{sup 3+}. ► Dielectric constant decreases. -- Abstract: A series of aluminum substituted Ni-ferrite nanoparticles have been synthesized by chemical co-precipitation and sol–gel techniques. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FTIR), DC electrical resistivity and dielectric properties. Analysis of the X-ray diffraction pattern of all the samples confirmed the formation of spinel structure. The crystallite sizes remain within the range 25–41 ± 3 nm. FTIR measurements show two fundamental absorption bands, assigned to the vibration of tetrahedral and octahedral sites. DC electrical resistivity increases from 6.60 × 10{sup 7} to 6.9 × 10{sup 10} Ω cm as the Al{sup 3+} concentration increases from 0.00 to 0.50. The dielectric constant and loss tangent decreases with increasing Al{sup 3+} concentration from 22 to 14, 0.354 to 0.27 respectively at 5 MHz for all the samples. Impedance measurements as a function of frequency (1 kHz–5 MHz) at room temperature further helped in analyzing the electrical properties of the prepared samples.

36 MATERIALS SCIENCE↗

‘Broken symmetries’ in macromolecular crystallography: phasing from unmerged data

Site-specific radiation damage and anisotropy of anomalous scattering can induce intensity differences in symmetry-related reflections. If the data are kept unmerged, these symmetry-breaking effects can become a source of phase information. The space-group symmetry of a crystal structure imposes a point-group symmetry on its diffraction pattern, giving rise to so-called symmetry-equivalent reflections. Instances in macromolecular crystallography are discussed in which the symmetry in reciprocal space is broken, i.e. where symmetry-related reflections are no longer equivalent. Such a situation occurs when the sample suffers from site-specific radiation damage during the X-ray measurements. Another example of broken symmetry arises from the polarization anisotropy of anomalous scattering. In these cases, the genuine intensity differences between symmetry-related reflections can be exploited to yield phase information in the structure-solution process. In this approach, the usual separation of the data merging and phasing steps is abandoned. The data are kept unmerged down to the Harker construction, where the symmetry-breaking effects are explicitly modelled and refined and become a source of supplementary phase information.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties of a Layered Cobaltite Sr{sub 1–x}Y{sub x}CoO{sub 3–δ} (x = 0.1)

The structure, the magnetic and magnetotransport properties of perovskite Sr{sub 0.9}Y{sub 0.1}CoO{sub 2.63} have been studied. The sample is shown to have a two-phase structure. The main phase has a tetragonally distorted unit cell and is described by space group I4/mmm. The broadening of the reflections with indices corresponding to doubling unit cell parameter c indicates the absence of the rigorous translation symmetry along axis c. The existence of the broadened superstructure reflection observed in the diffraction pattern at small angles at temperature lower than 400 K is explained by the existence of the monoclinic phase whose content is significantly lower than that of the tetragonal phase, but is dominant in the Sr{sub 0.8}Y{sub 0.2}CoO{sub 3–δ} composition. The spontaneous magnetization appears as the monoclinic phase forms. The magnetic structure is mainly G-type antiferromagnetic with magnetic moments 1.5μ{sub B} in the layers of CoO{sub 6} octahedra and 2μ{sub B} in the anion-deficit CoO{sub 4+γ} layers. The conduction of the Sr{sub 0.9}Y{sub 0.1}CoO{sub 2.63} composition has a semiconducting character. The magnetoresistance is 57% in a field of 14 T at a temperature of 5 K and strongly decreases with the temperature increase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave-Assisted Combustion Synthesis of ZnO:Eu Nanoparticles: Effect of Fuel Types

Nanoparticles of Europium oxide doped with Zinc oxide were synthesized via microwave-assisted combustion method. Citric acid as a simultaneous fuel and chelating agent and glycine as a fuel and mixture of these fuels were sleeted. X-Ray diffraction patterns (XRD) indicated the formation of ZnO structure with a few amount of Eu{sub 2}O{sub 3} phase. Fourier transformation infra red (FTIR) spectra reveal the increase of ZnO{sub 4} bonds with glycine content of fuels mixture. Scanning electron microscope (SEM) images showed the conversion of nanosphere to spongy-like structure with respect to change of fuel mixtures from citric to glycine. From transmission electron microscopy (TEM) nanoparticles of a mean size 30 nm are observed Green fluorescence emission of different samples was due to activation of self activated center of ZnO structure through transition of electron from Eu{sup 3+} to V{sub zn} sites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CuO cauliflowers for supercapacitor application: Novel potentiodynamic deposition

Graphical abstract: Schematic experimental setup used for the potentiodynamic mode of electrodeposition for the synthesis of CuO cauliflower onto stainless steel substrate. Highlights: ► Synthesis of CuO using potentiodynamic mode of electrodeposition. ► Uniformly spread cauliflower-like nanostructure. ► CuO cauliflowers provide high specific capacitance with good stability. ► CuO cauliflowers show high power and energy density values. -- Abstract: In present investigation, synthesis and characterization of novel cauliflower-like copper oxide (CuO) and its electrochemical properties have been performed. The utilized CuO cauliflowers were prepared by potentiodyanamic mode from an aqueous alkaline bath. X-ray diffraction pattern confirm the formation of monoclinic CuO cauliflowers. Scanning electron micrograph analysis reveals that CuO cauliflowers are uniformly spread all over the substrate surface with the surface area of 49 m{sup 2} g{sup −1} with bimodal pore size distribution. Electrochemical analysis shows that CuO cauliflower exhibits high specific capacitance of 179 Fg{sup −1} in 1 M Na{sub 2}SO{sub 4} electrolyte with 81% capacity retention after 2000 cycles. The Ragone plot discovers better power and energy densities of cauliflowers-like CuO sample. Present investigation illustrates that the potentiodynamic approach for the direct growth of cauliflower-like CuO is simple and cost-effective and can be applied for synthesis of other metal oxides, polymers etc.

36 MATERIALS SCIENCE↗

Structural study of Ti-doped CoFe{sub 2}O{sub 4} mixed spinel ferrite

We present the results on atomic and lattice structure of the polycrystalline spinel ferrites system Co{sub 1-x} Ti{sub x}Fe{sub 2}O{sub 4} (x = 0.0, 0.25, 0.50) synthesized by following the conventional solid-state reaction route. The observed X-ray diffraction (XRD) data confirms that all the prepared samples are indexed in cubic crystal structure (space group Fd3m). Diffraction pattern showed TiO{sub 2} phase due to presence of Ti{sup +4} ions. Four Raman active phonon modes are observed for CoFe{sub 2}O{sub 4} sample existing around 295, 462, 585, 689, cm{sup −1} as Eg, T{sub 2g}(2), T{sub 2g}(3), and A{sub 1g}, respectively. With 25 % Ti ion doping, the peak T{sub 2g}(3) disappears, while to that T{sub 2g}(1) emerges. This is an indication of presence of TiO{sub 2} phase in Co{sub 0.75}Ti{sub 0.25}Fe{sub 2}O{sub 4} and Co{sub 0.5}Ti{sub 0.5}Fe{sub 2}O{sub 4} ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ptychographic atomic electron tomography: Towards three-dimensional imaging of individual light atoms in materials

Through numerical simulations, we demonstrate the combination of ptychography and atomic electron tomography as an effective method for low dose imaging of individual low-Z atoms in three dimensions. After generating noisy diffraction patterns with multislice simulations of an aberration-corrected scanning transmission electron microscope through a 5-nm zinc-oxide nanoparticle, we have achieved three-dimensional (3D) imaging of individual zinc and oxygen atoms and their defects by performing tomography on ptychographic projections. The methodology has also been simulated in 2D materials, resolving individual sulfur atoms in vertical WS 2 /WSe 2 van der Waals heterostructure with a low total electron dose where annular-dark-field images fail to resolve. Overall, we envision that the development of this method could be instrumental in studying the precise 3D atomic structures of radiation sensitive systems and low-Z atomic structures such as 2D heterostructures, catalysts, functional oxides, and glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Clarification of enhanced ferromagnetism in Be-codoped InMnP fabricated using Mn/InP:Be bilayers grown by molecular beam epitaxy

The p-type InMnP:Be epilayers were prepared by the sequential growth of Mn/InP:Be bilayers using molecular-beam-epitaxy and the subsequent in-situ annealing at 200-300 deg. C. In triple-axis x-ray diffraction patterns, the samples revealed a shoulder peak indicative of intrinsic InMnP. The ferromagnetic transition in InMnP:Be was observed to occur at the elevated temperature of {approx}140 K, and the ferromagnetic spin-domains clearly appeared in magnetic force microscopy images. The improved ferromagnetic properties are attributed to the increased p-d hybridation due to high p-type conductivity of InMnP:Be (p {approx} 10{sup 20 }cm{sup -3}). The results suggest that enhanced ferromagnetism can be effectively obtained from Be-codoped InMnP.

36 MATERIALS SCIENCE↗

Structural relaxation in amorphous oxide semiconductor, a-In-Ga-Zn-O

Amorphous In-Ga-Zn-O (a-IGZO) is expected as a backplane transistor material to drive next-generation flat-panel and flexible displays. It has been elucidated that thermal annealing even at low temperatures <200 deg. C reduces deep subgap defects and those at {>=}300 deg. C further improve device characteristics, stability, and uniformity. These temperatures are much lower than the reported crystallization temperature (T{sub X}{approx} 600 deg. C). In this work, we investigate effects of thermal annealing on the structural and optical properties of a-IGZO thin films. We performed classical molecular dynamics simulation (CMD) and optical interference analyses including spectroscopic ellipsometry (SE). CMD reproduced the x-ray diffraction pattern of a-IGZO and exhibited a glass transition. Experimentally, it was found that T{sub X} depends largely on deposition methods and conditions, probably due to different chemical compositions. Sputter-deposited a-IGZO films exhibited onset T{sub X}{approx} 600 deg. C and crystalline volume fraction X{sub C} increased linearly from 600 deg. C. 1.2% of film densification occurred even at 600 deg. C due to crystallization. High-temperature in situ SE measurements did not detect a symptom of a glass transition temperature (T{sub g}) presumably because the T{sub X} is close to T{sub g} similar to the case of amorphous metals.

36 MATERIALS SCIENCE↗

Photosensitive structures based on CuIn{sub 5}Te{sub 8} single crystals: Development and properties

A new ternary compound is synthesized for the first time, and bulk CuIn{sub 5}Te{sub 8} single crystals are grown by directed crystallization of near-stoichiometric melt. It is established from X-ray diffraction patterns of grown crystals that they exhibit the structure of imperfect chalcopyrite with parameters of the unit cell of CuIn{sub 5}Te{sub 8}, which were close to those known for the CuInTe{sub 2} ternary compound with the composition index n = 0. First, photosensitive structures are fabricated based on CuIn{sub 5}Te{sub 8} crystals, and photosensitivity spectra are obtained for them; it is shown that it is possible to achieve broadband photosensitivity under illumination of the barrier side of these crystals. From the analysis of photosensitivity spectra, the character of band-to-band transitions and corresponding energies of these transitions in CuIn{sub 5}Te{sub 8} are determined. This opens up prospects to use this new semiconductor in photoconverters of solar radiation.

36 MATERIALS SCIENCE↗

Short-Range Order in α-FeAl Soft Magnetic Alloy

The atomic structure of iron–aluminum alloy samples containing about 7 at % of aluminum (α region of the phase diagram) was investigated by X-ray diffraction. The samples were annealed in the paramagnetic (T > {sup T}{sub C}) and ferromagnetic (T < T{sub C}) states. In the first case, the structural state was fixed by quenching from the annealing temperature in water, and, in the second case, by slow cooling. Diffraction patterns of single-crystal samples were taken on an X-ray four-circle diffractometer. It is shown that local ordering, regardless of the prehistory of a sample, is a combination of B2-phase clusters (the CsCl type structure), which were previously found in iron–silicon alloys with Si content up to 10%, and small regions with D0{sub 3} short-range order. The former consist of two B2-cells having a common face, while the latter consist predominantly of one unit cell of the D0{sub 3}-phase. Within the accuracy of the experiment, no significant difference in the structural states in the paramagnetic and ferromagnetic phases was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗