Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Determining Asymmetry Of A Weld Puddle

Sensing-and-data-processing subsystem provides information of asymmetry of weld puddle with respect to original midplane of joint. Shape of puddle inferred from surface-temperature distribution. Part of welding-control system which enables system to correct for asymmetry.

Gutow, David A.↗

Thermal modeling of comet Kopff: Implications for the CRAF mission

A thermal model of periodic comet Kopff was developed to aid in planning for the Comet Rendezvous Asteroid Flyby mission. The model is based on the comet nucleus model, which estimates the surface temperature distribution and sublimation rates on a rotating icy sphere in heliocentric orbit. The model results are compared with the observed gas production rates from Kopff in 1983. It is found that approximately 15 percent of the sunlit nucleus surface is active, a relatively high fraction for a typical short-period comet. This suggests that the actual nucleus radius may be larger than the model value. The slope of the observed gas production curve with heliocentric distance is steeper than that predicted by the thermal model. This may indicate the existence of a more complex process than direct sublimation of surface ices, such as gas diffusion through a nonvolatile insulating crust.

Weissman, Paul↗

Wire core reactor for NTP

The development of the wire core system for Nuclear Thermal Propulsion (NTP) that took place from 1963 to 1965 is discussed. A wire core consists of a fuel wire with spacer wires. It's an annular flow core having a central control rod. There are actually four of these, with beryllium solid reflectors on both ends and all the way around. Much of the information on the concept is given in viewgraph form. Viewgraphs are presented on design details of the wire core, the engine design, engine weight vs. thrust, a technique used to fabricate the wire fuel element, and axial temperature distribution.

Harty, R. B.↗

Spectral fitting, shock layer modeling, and production of nitrogen oxides and excited nitrogen

An analysis was made of N2 emission from 8.72 MJ/kg shock layer at 2.54, 1.91, and 1.27 cm positions and vibrational state distributions, temperatures, and relative electronic state populations was obtained from data sets. Other recorded arc jet N2 and air spectral data were reviewed and NO emission characteristics were studied. A review of operational procedures of the DSMC code was made. Information on other appropriate codes and modifications, including ionization, were made as well as a determination of the applicability of codes reviewed to task requirement. A review was also made of computational procedures used in CFD codes of Li and other codes on JSC computers. An analysis was made of problems associated with integration of specific chemical kinetics applicable to task into CFD codes.

Blackwell, H. E.↗

Climatological stratospheric modeling

The Goddard Institute for Space Studies (GISS) Three dimensional Global Climate/Middle Atmosphere Model was used to investigate the effect of doubled carbon dioxide on the middle atmosphere. Carbon dioxide was doubled in both the troposphere and stratosphere, and the sea surface temperatures were increased in accordance with results from the GISS climate model. Additional experiments were run with different sea surface temperature distributions, and doubling the carbon dioxide only in the troposphere or stratosphere.

Rind, David↗

Orbital transfer rocket engine technology program: Soft wear ring seal technology

Liquid oxygen (LOX) compatibility tests, including autogenous ignition, promoted ignition, LOX impact tests, and friction and wear tests on different PV products were conducted for several polymer materials as verification for the implementation of soft wear ring seals in advanced rocket engine turbopumps. Thermoplastics, polyimide based materials, and polyimide-imide base materials were compared for oxygen compatibility, specific wear coefficient, wear debris production, and heat dissipation mechanisms. A thermal model was generated that simulated the frictional heating input and calculated the surface temperature and temperature distribution within the seal. The predictions were compared against measured values. Heat loads in the model were varied to better match the test data and determine the difference between the measured and the calculated coefficients of friction.

Lariviere, Brian W.↗

Full Navier-Stokes analysis of a two-dimensional mixer/ejector nozzle for noise suppression

A three-dimensional full Navier-Stokes (FNS) analysis was performed on a mixer/ejector nozzle designed to reduce the jet noise created at takeoff by a future supersonic transport. The PARC3D computational fluid dynamics (CFD) code was used to study the flow field of the nozzle. The grid that was used in the analysis consisted of approximately 900,000 node points contained in eight grid blocks. Two nozzle configurations were studied: a constant area mixing section and a diverging mixing section. Data are presented for predictions of pressure, velocity, and total temperature distributions and for evaluations of internal performance and mixing effectiveness. The analysis provided good insight into the behavior of the flow.

Debonis, James R.↗

Dynamic interactions between hypersonic vehicle aerodynamics and propulsion system performance

Described here is the development of a flexible simulation model for scramjet hypersonic propulsion systems. The primary goal is determination of sensitivity of the thrust vector and other system parameters to angle of attack changes of the vehicle. Such information is crucial in design and analysis of control system performance for hypersonic vehicles. The code is also intended to be a key element in carrying out dynamic interaction studies involving the influence of vehicle vibrations on propulsion system/control system coupling and flight stability. Simple models are employed to represent the various processes comprising the propulsion system. A method of characteristics (MOC) approach is used to solve the forebody and external nozzle flow fields. This results in a very fast computational algorithm capable of carrying out the vast number of simulation computations needed in guidance, stability, and control studies. The three-dimensional fore- and aft body (nozzle) geometry is characterized by the centerline profiles as represented by a series of coordinate points and body cross-section curvature. The engine module geometry is represented by an adjustable vertical grid to accommodate variations of the field parameters throughout the inlet and combustor. The scramjet inlet is modeled as a two-dimensional supersonic flow containing adjustable sidewall wedges and multiple fuel injection struts. The inlet geometry including the sidewall wedge angles, the number of injection struts, their sweepback relative to the vehicle reference line, and strut cross-section are user selectable. Combustion is currently represented by a Rayleigh line calculation including corrections for variable gas properties; improved models are being developed for this important element of the propulsion flow field. The program generates (1) variation of thrust magnitude and direction with angle of attack, (2) pitching moment and line of action of the thrust vector, (3) pressure and temperature distributions throughout the system, and (4) performance parameters such as thrust coefficient, specific impulse, mass flow rates, and equivalence ratio. Preliminary results are in good agreement with available performance data for systems resembling the NASP vehicle configuration.

Flandro, G. A.↗

On the physics of waves in the solar atmosphere: Wave heating and wind acceleration

In the area of solar physics, new calculations of the acoustic wave energy fluxes generated in the solar convective zone was performed. The original theory developed was corrected by including a new frequency factor describing temporal variations of the turbulent energy spectrum. We have modified the original Stein code by including this new frequency factor, and tested the code extensively. Another possible source of the mechanical energy generated in the solar convective zone is the excitation of magnetic flux tube waves which can carry energy along the tubes far away from the region. The problem as to how efficiently those waves are generated in the Sun was recently solved. The propagation of nonlinear magnetic tube waves in the solar atmosphere was calculated, and mode coupling, shock formation, and heating of the local medium was studied. The wave trapping problems and evaluation of critical frequencies for wave reflection in the solar atmosphere was studied. It was shown that the role played by Alfven waves in the wind accelerations and the coronal hole heating is dominant. Presently, we are performing calculations of wave energy fluxes generated in late-type dwarf stars and studying physical processes responsible for the heating of stellar chromospheres and coronae. In the area of physics of waves, a new analytical approach for studying linear Alfven waves in smoothly nonuniform media was recently developed. This approach is presently being extended to study the propagation of linear and nonlinear magnetohydrodynamic (MHD) waves in stratified, nonisothermal and solar atmosphere. The Lighthill theory of sound generation to nonisothermal media (with a special temperature distribution) was extended. Energy cascade by nonlinear MHD waves and possible chaos driven by these waves are presently considered.

Musielak, Z. E.↗

Low power arcjet test facility impacts

Performance characterization of a flight-type 1.4 kW arcjet system were conducted at the Rocket Research Company (RRC) in Redmond, WA, and at the NASA LeRC in Cleveland, OH. The objectives of these tests were as follows: to compare low-power arcjet performance at two different test facilities; to compare arcjet performance obtained with a 2:1 mixture of gaseous hydrogen and nitrogen and hydrazine; and to quantify the effects of test cell pressure on thruster operating characteristics. Performance and thruster temperature distributions were measured at thruster input power levels and propellant mass flow rates ranging from 1274 to 1370 W and from 3.2 x 10(exp -5) to 5.1 x 10(exp -5) kg/s, respectively. Specific impulses measured at the two facilities, at comparable test cell pressures, using gaseous hydrogen-nitrogen propellant mixtures agreed to within 1 percent over the range of operating conditions tested. The specific impulses measured using hydrazine propellant were higher than that for the cold hydrogen-nitrogen mixtures. Agreement between by hydrazine and gas mixture data was good, however, when the differences in propellant enthalpies at the thruster inlet were considered. Specific impulse showed a strong dependence on test facility pressure, and was 3 to 4 percent higher below 0.1 Pa than for test cell pressures above 5 Pa.

Morren, W. Earl↗

The temperature of the circumstellar envelope of Alpha Orionis

The processes that heat and cool the circumstellar envelope of Alpha Ori are analyzed and the temperature calculated as a function of distance from the star. Cooling by fine structure lines is included for the first time in a general way in the theory of the thermal balance of a circumstellar envelope. Adiabatic cooling, dust-drag heating, and various line coolants contribute in the outer envelope, whereas the fine structure lines of O I and Si II and adiabatic cooling are dominant in the inner envelope. The rotational levels of CO cool the gas only at very small and at very large distances; elsewhere they provide a small amount of heating. The temperature declines very rapidly at first and then varies roughly as r exp -1/2 in the outer envelope. At very large distances, the temperature distribution flattens out due to photoelectron heating and reaches a minimum of about 4 K at about 250 arcsec.

Rodgers, Bernadette↗

Finite difference solution for transient cooling of a radiating-conducting semitransparent layer

Transient solutions were obtained for cooling a semitransparent material by radiation and conduction. The layer is in a vacuum environment so the only means for heat dissipation is by radiation from within the medium leaving through the boundaries. Heat conduction serves only to partially equalize temperatures across the layer. As the optical thickness is increased, steep temperature gradients exist near the boundaries when conduction is relatively small. A solution procedure is required that will provide accurate temperature distributions adjacent to the boundaries, or radiative heat losses will be in error. The approach utilized numerical Gaussian integration to obtain the local radiative source term, and a finite difference procedure with variable space and time increments to solve the transient energy equation.

Siegel, Robert↗

Error analysis of image reconstruction by a synthetic aperture interferometric radiometer

An error analysis is presented for the image reconstruction algorithm currently employed by the electronically steered thinned array radiometer aircraft instrument. This instrument samples components of the Fourier transform of the brightness temperature distribution at 1.4 GHz. Sources of error are identified, including systematic offsets and stochastic noise in the measurements, errors in the interference pattern antenna calibration, multipath scattering from the antenna support structure, mutual coupling between nearby array elements, and variations in the antenna patterns of the array elements. These errors are shown to produce artifacts in the image which appear as 'streaks' running along the instrument flight line. Possible hardware corrections are discussed. These include a reduction in the profile of the antenna support structure and a decoupling of adjacent and other nearby array elements using corrugated 'skirts'. Also discussed are several image enhancement techniques which detect and correct for some of the streaking. These techniques include a renormalization of the interference patterns based on the measured element patterns, a perturbation based interpretation of image contrast, and a covariance analysis of noise present in the image.

Ruf, Christopher S.↗

Studies of the effects of curvature on dilution jet mixing

An analytical program was conducted using both three-dimensional numerical and empirical models to investigate the effects of transition liner curvature on the mixing of jets injected into a confined crossflow. The numerical code is of the TEACH type with hybrid numerics; it uses the power-law and SIMPLER algorithms, an orthogonal curvilinear coordinate system, and an algebraic Reynolds stress turbulence model. From the results of the numerical calculations, an existing empirical model for the temperature field downstream of single and multiple rows of jets injected into a straight rectangular duct was extended to model the effects of curvature. Temperature distributions, calculated with both the numerical and empirical models, are presented to show the effects of radius of curvature and inner and outer wall injection for single and opposed rows of cool dilution jets injected into a hot mainstream flow.

Holdeman, James D.↗

CW dye laser technique for simultaneous, spatially-resolved measurements of temperature, pressure, and velocity of NO in an underexpanded free jet

Gas dynamic quantities within an underexpanded free jet were measured nonintrusively using a rapid-tuning, CW ring dye laser. A nitrogen jet was seeded with 0.5 percent NO in N2, and the conditions were controlled such that a barrel shock formed. The frequency-doubled output of the dye laser was used to spectrally resolve rotational lines in the NO gamma band near 225 nm. With the rapid-tuning capability, these rotational spectra were acquired at a repetition rate of 4 kHz. Spatial resolution was afforded by monitoring the induced fluorescence via a lens and photomultiplier tube. Modeling the spectrally-resolved features with Voigt profiles permitted simultaneous measurements of NO velocity, rotational temperature, and pressure. Expansion of the jet was assumed to be isentropic, and agreement between measured and expected values was typically better than 10 percent over most of the Mach-number range encountered. At high Mach numbers, the measured rotational temperatures systematically departed from the isentropic temperature distribution. Such a measured departure could be ascribed to the onset of a non-Boltzmann distribution of NO rotational states.

Di Rosa, M. D.↗

Effects of equatorially trapped ions on refilling of the plasmasphere

The kinetic aspects of shock formation in response to the equatorial heating of ions are reported by means of small-scale kinetic simulations of countersteaming plasma flows along a spatially varying magnetic field having the features of the dipolar magnetic field lines. Attention is given to the trapping of the field-aligned flowing ions in response to the simulated equatorial heating of ions and the associated self-consistent structures in the electric potentials and the f-plasma flow pattern. Trapping is found to lead to the formation of electrostatic shocks, which propagate away from the 'equator' as seen in the hydrodynamic model of Singh and Torr (1990). The shocks form near the mirror points of the 'equatorially' heated ions. The second stage of the refilling with equatorially trapped ions is reported. A variety of structures in density and temperature distributions as the refilling proceeds slowly is found.

Singh, Nagendra↗

Simulation of the zonal mean climatology of the middle atmosphere with a three-dimensional spectral model for solstice and equinox conditions

A 3D spectral model was used to simulate the zonal mean state of the middle atmosphere for solstice and equinox conditions. The model incorporates realistic parameterizations of atmospheric infrared cooling and a gravity wave formulation based on a combination of Lindzen's (1981) and Matsuno's (1982) approaches. The temperature distributions for both seasons and the zonal wind distribution for solstice are found to be in satisfactory agreement with the empirical model of Fleming et al. (1988). Net vertical fluxes of horizontal momentum are in good agreement with systematic observations of gravity waves in the middle atmosphere.

Akmaev, R. A.↗

Heat transfer and fluid flow in floating-zone crystal growth with a mostly covered melt surface

Computer simulation was conducted to study a modified floating-zone crystal growth process, in which the melt surface is mostly covered with a heated ring. The growth of 6-mm diameter single crystals of NaNO3 was considered, and the effects of the following parameters were studied: (1) temperature of the ring, (2) growth rate, (3) surface tension-temperature coefficient of the melt, (4) thermal expansion coefficient of the melt, and (5) gravity. It was demonstrated that thermocapillary convection in the melt zone is reduced significantly in this modified process. The model was checked against the measured lengths of the meniscus near the growth front and axial temperature distribution in a growing crystal, and the agreement was good.

Lan, C. W.↗