Search NASA⌕ Search

SEARCH · Search NASA

Results for “High current density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Advancing the Physics Basis of Quiescent H-mode through Exploration of ITER Relevant Parameters

Recent experiments on DIII-D have overcome a long-standing limitation in accessing quiescent H-mode (QH-mode), a high confinement state of the plasma that does not exhibit the explosive instabilities associated with edge localized modes (ELMs). In the past, QH-mode was associated with low density operation, but has now been extended to high normalized densities compatible with operation envisioned for ITER. Through the use of strong shaping, QH-mode plasmas have been maintained at high densities, both absolute (ηe ≈ 7 × 1019 m—3) and normalized Greenwald fraction (ηe/ηG > 0:7) . In these plasmas, the pedestal can evolve to very high pressures and current as the density is increased. Calculations of the pedestal height and width from the EPED model are quantitatively consistent with the experimental observed evolution with density. The comparison of the dependence of the maximum density threshold for QH-mode with plasma shape help validate the underlying theoretical peeling-ballooning models describing ELM stability. High density QH-mode operation with strong shaping has allowed stable access to a previously predicted regime of very high pedestal dubbed \Super H-mode". In general, QH-mode is found to achieve ELM-stable operation while maintaining adequate impurity exhaust, due to the enhanced impurity transport from an edge harmonic oscillation, thought to be a saturated kink- peeling mode driven by rotation shear. In addition, the impurity confinement time is not affected by rotation, even though the energy confinement time and measured E Χ B shear is observed to increase at low toroidal rotation. Together with demonstrations of high beta, high confinement and low q95 for many energy confinement times, these results suggest QH-mode as a potentially attractive operating scenario for ITER's Q=10 mission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Influence of Fe Substitution in Lanthanum Calcium Cobalt Oxide on the Oxygen Evolution Reaction in Alkaline Media

The effect due to systematic substitution of cobalt by iron in La 0.6 Ca 0.4 Co 1-x Fe x O 3 towards the oxygen evolution reaction(OER) in alkaline media has been investigated. We synthesized these compounds by a facile glycine-nitrate synthesis and the phase formation was confirmed by X-ray diffraction and Neutron Diffraction elemental analysis. The apparent OER activity was evaluated by quasi steady state current measurements in alkaline media using a traditional three-electrode cell. X-ray photoelectron spectroscopy shows iron substitution causes an increase in the surface concentration of various cobalt oxidation states. Tafel slope in the vicinity of 60 mV/decade and electrochemical reaction order towards OH- near unity were achieved for the unsubstituted La 0.6 Ca 0.4 CoO 3 . Moreover, a decrease in the Tafel slope to 49 mV/decade was observed when iron is substituted in high amounts in the perovskite structure. The area specific current density showed dependence on the Fe fraction, however the relationship of specific current density with Fe fraction is not linear. High Fe substitutions, La 0.6 Ca 0.4 Co 0.2 Fe 0.8 O 3 and La 0.6 Ca 0.4 Co 0.1 Fe 0.9 O 3 showed higher area specific activity towards OER than La 0.6 Ca 0.4 CoO 3 or La 0.6 Ca 0.4 FeO 3 . Finally, we believe iron inclusion in the cobalt sites of the perovskite helps decrease the electron transfer barrier and facilitates the formation of cobalt-hydroxide at the surface. Possible OER mechanisms based on the observed kinetic parameters will be discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advancing Reel-to-Reel Inspection Techniques for Long HTS Conductors: Comparison and Innovations

The continuous advancement of high-temperature superconductor (HTS) technologies has greatly accelerated the development and deployment of HTS applications. Among the critical tools supporting these advancements are reel-to-reel (R2R) critical current (I c ) measurement techniques, which are extensively used by both manufacturers and end users to characterize long-length REBCO conductors. These techniques play a vital role in quality assurance and quality control (QA/QC), ensuring the reliability and performance of HTS conductors and applications throughout the production cycle. We have developed a range of in-house devices for R2R measurements at the University of Houston and Princeton Plasma Physics Laboratory. These include one-dimensional (1D) scan using a magnetic circuit (MC) and two-dimensional (2D) magnetic field mapping systems based on scanning probe array microscope (SPAM) or scanning probe microscopy (SPM). Each technique offers distinct advantages: the MC system provides ultra-fast scanning speeds, ideal for rapid inspection in large-scale industrial production; the high-resolution SPM delivers detailed insights for conductor research and development; and the SPAM, with its simpler mechanical setup, can be upgraded for higher field and lower temperature conditions with a balanced 2D resolution. Here we compared the magnetization and detection capabilities of these techniques through experiments on rare-earth barium copper oxide (REBCO) coated conductor samples, with data analysis supported by numerical simulations. Based on our comprehensive comparative studies, we propose enhancements for each measurement system and provide guidelines for selecting the optimal technique combinations to meet specific application requirements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunnel oxide passivating contact enabled by polysilicon on ultra-thin SiO 2 for advanced silicon radiation detectors

Conventional silicon junction detectors encounter significant carrier recombination within the heavily doped p⁺ and n⁺ layers, as well as beneath the metal contact regions, creating the so-called “dead layers”, especially on the detector side. In this study, we present the tunnel oxide passivating contact with doped polysilicon on oxide, which demonstrates exceptional surface passivation and carrier selectivity. The key innovation lies in an ultra-thin (~ 1.5 nm) interfacial oxide layer that facilitates efficient majority carrier transportation via tunneling while effectively block minority carriers. Remarkably low saturation current densities, ranging from 5 to 10 fA/cm² even with the metal contact, underscore the superiority of both n-type and p-type tunnel oxide passivating contacts. In contrast, conventional p–n junction or high-low junction exhibit saturation current densities ranging from 10 to 90 fA/cm² in the studied p⁺ and n⁺ layers with surface passivation schemes due to Auger recombination and surface recombination, and 1000–6000 fA/cm² with metal contacts due to intense metal-induced recombination at the interface. These findings indicate the potential and superiority of implementing n-type tunnel oxide passivating contact on the detector side and p-type contact on the back side for advanced silicon radiation detectors. This approach would enable thorough collection of generated charge carriers along the track of incident ionizing radiation particles, leading to improved energy resolution and reduced noise levels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Erbium doped anatase TiO{sub 2} nanoparticles for photovoltaic applications

Doping of rare earth metal erbium (Er) into the nanocrystalline titanium dioxide (TiO{sub 2}) was identified to enhance the performance of photocatalytic and photovoltaic applications. Herein, TiO{sub 2} was doped with different concentrations of erbium through hydrothermal method and then employed to photocatalytic and photovoltaic applications. XRD, FT-IR, TEM, AFM, UV–visible DRS and photocatalytic measurements were carried out to examine the impact of erbium doping on TiO{sub 2}. The photovoltaic study revealed that the Er doped TiO{sub 2} exhibited the better power conversion efficiency with high short-circuit current density (J{sub sc}) and open-circuit voltage (V{sub oc}). This enhancement may be due to the reduced charge recombination, increased dye absorption ability and fast photoelectron injection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photoelectrocatalytic reduction of CO 2 to formate using immobilized molecular manganese catalysts on oxidized porous silicon

The reduction of carbon dioxide (CO 2 ) to formate using molecular catalysts immobilized on high surface area porous silicon is described. Manganese complexes of the type ( R bpy)Mn(CO) 3 Br (bpy = 2,2′-bipyridine) were prepared with silatrane groups on the bpy ligand for attachment to oxide-coated porous silicon (SiO x -porSi). SiO x -porSi wafers were formed by heating hydrogen-terminated p-type porous silicon wafers under air, and the manganese complexes were immobilized on SiO x -porSi by heating at 80°C. The resulting hybrid photoelectrodes are photoelectrocatalysts for CO 2 reduction in acetonitrile containing 2.0 M triethylamine and 2.0 M isopropanol, yielding formate with high selectivity (>96%) and current density (∼0.6 mA/cm 2 ), excellent reproducibility, and a photovoltage of 280 mV at −1.75 V (versus ferrocenium/ferrocene) under 1 sun illumination. Here, the applied potential is close to the equilibrium potential for CO 2 reduction to formate. This work presents rare examples of immobilized molecular catalysts for CO 2 reduction to formate and the first on semiconducting silicon.

13 HYDRO ENERGY↗

Catalytic activity in lithium-treated core–shell MoO x /MoS 2 nanowires

Significant interest has grown in the development of earth-abundant and efficient catalytic materials for hydrogen generation. Layered transition metal dichalcogenides present opportunities for efficient electrocatalytic systems. Here, we report the modification of 1D MoO x /MoS 2 core–shell nanostructures by lithium intercalation and the corresponding changes in morphology, structure, and mechanism of H 2 evolution. The 1D nanowires exhibit significant improvement in H 2 evolution properties after lithiation, reducing the hydrogen evolution reaction (HER) onset potential by ~50 mV and increasing the generated current density by ~600%. The high electrochemical activity in the nanowires results from disruption of MoS 2 layers in the outer shell, leading to increased activity and concentration of defect sites. This is in contrast to the typical mechanism of improved catalysis following lithium exfoliation, i.e., crystal phase transformation. As a result, these structural changes are verified by a combination of Raman and X-ray photoelectron spectroscopy (XPS).

08 HYDROGEN↗

Assessment of Protective Coatings for Metal-Supported Solid Oxide Electrolysis Cells

Green hydrogen is essential to achieving carbon neutrality, and solid oxide electrolysis cells can produce hydrogen using renewable power and waste heat. Insufficient long-term durability of solid oxide electrolysis cells has impeded their commercialization. Here, coatings in the porous stainless steel support of metal-supported solid oxide electrolysis cells (MS-SOECs) are used to dramatically improve their performance and durability. The long-term degradation rate of uncoated MS-SOECs is highly dependent on the current density, with the fastest degradation occurring at the highest current density tested, 0.5 A cm -2 . At this current density, coatings are quite effective. Three protective coatings, Co 3 O 4 deposited by atomic layer deposition (ALD), Co 3 O 4 deposited by electroplating deposition (ED), and CuMn 1.8 O 4 (CMO) deposited by electrophoretic deposition (EPD), are explored to enhance the performance of MS-SOECs with La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 -Sm 0.2 Ce 0.8 O 3 (LSCF-SDC) as the oxygen catalyst and SDC-Ni as the fuel catalyst. The initial average current density at 1.4 V is increased with coatings. It is 0.83 mA cm -2 for the ALD cells, 1.05 mA cm -2 for the ED cells, and 1.13 mA cm -2 for the EPD cells, compared to 0.65 mA cm -2 for the bare cells at 700 °C with 50% H 2 -50% H 2 O. The degradation rate over 1000 h of continuous operation is reduced from 36% to 26%, 27%, and 19% kh -1 with the three coatings, respectively. Furthermore, these improvements are ascribed to reduced Cr poisoning on the oxygen catalyst, which is one of the primary degradation modes for this type of MS-SOEC.

25 ENERGY STORAGE↗

Effect of the Molecular Configuration of Perylene Diimide Acceptors on Charge Transfer and Device Performance

Three perylene diimides (PDI)-based small molecules, T2-SePDI2, T3B-SePDI3, and T4B-SePDI4, with different molecular configurations are synthesized. Due to a large steric hindrance, the molecular configuration of T3B-SePDI3 is the most distorted, followed by T4BSePDI4, while T2-SePDI2 shows the smallest steric hindrance. Inverted bulk heterojunction solar cells based on T3B-SePDI3 and PBDB-T show the highest power conversion efficiency (PCE) of 5.82% with an open-circuit voltage of 0.98 V, a high short-circuit current density of 10.52 mA/cm2, and a fill factor of 56.31%. The PCEs of the T2-SePDI2- and T4B-SePDI4- based devices are 4.10% and 5.10%, respectively. Furthermore, the results demonstrate that the molecular configuration of the PDI-based small molecule acceptor is critical and that increasing the steric hindrance is helpful in suppressing aggregation and improving device performance.

14 SOLAR ENERGY↗

Alkyl Chain End Group Engineering of Small Molecule Acceptors for Non-Fullerene Organic Solar Cells

Alkyl chain engineering is widely used to prepare high-performance donor materials. However, relatively few studies have been focused on the alkyl chain optimization of acceptor materials. Herein, a series of new A-D-A (acceptor-donor-acceptor) type small molecule acceptors (ITBTR-C2, ITBTR-C4, ITBTR-C6, and ITBTR-C8) with indacenodithieno[3,2-b]thiophene (IDTT) as the core, benzothiadiazole (BT) as the π bridge, and ethyl-, butyl-, hexyl-, and octyl-substituted 2-(1,1-dicyanomethylene) rhodanine as the end groups, respectively, are successfully synthesized to systematically investigate the alkyl substituent effects on the physical, chemical, and electronic properties of A-D-A type small molecule acceptors. All molecules exhibit a strong and broad absorption from 600 to 800 nm as well as similar HOMO and LUMO energy levels. ITBTR-C6 with hexyl substitution showed the highest electron mobility and better phase separation morphology after blending with a donor polymer (PBDB-T). Therefore, inverted bulk heterojunction organic solar cells based on ITBTR-C6:PBDB-T blends exhibit the highest power conversion efficiency (PCE) of 8.26% with an open-circuit voltage ( V OC ) of 0.89 V, a high short-circuit current density ( J SC ) of 15.80 mA/cm2, and a fill factor (FF) of 58.21%, while the PCEs of ITBTR-C2-, ITBTR-C4-, and ITBTR-C8-based devices are 7.04%, 7.43%, and 7.93%, respectively. After solvent vapor and thermal annealing, both the J SC and FF values of the ITBTR-C6-based device further increased, leading to a PCE of 9.29%. Furthermore, the results demonstrate that the alkyl chain substitution of A-D-A type small molecule acceptors is critical, and an appropriate adjustment of the alkyl chains can effectively enhance device performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling Mass Transport in Direct Carbon Dioxide Zero-Gap Electrolyzers via Cell Compression

The development of high-performance CO 2 electrolyzers is crucial for accelerating the sustainable production of fuels and chemicals integrated with renewable energy sources. Here, we introduce a methodology to actively control mass transport inside a realistic zero-gap membrane electrode assembly of a CO 2 electrolyzer by varying the gasket thickness, which consequently changes the cell compression. This allows control over the thickness and porosity of the gas diffusion electrodes, influencing the overall electrolyzer performance, as demonstrated using Ag-deposited electrodes. At low operating voltages (<2.9 V), both high- and low-compression electrolyzers exhibit similar faradaic efficiencies and partial current densities for CO formation. However, at high voltages, the low-compression electrolyzer with high electrode porosity demonstrates superior CO selectivity and activity with suppressed H 2 formation. These experimental results are validated by the computational membrane electrode assembly (MEA) model developed by using the measured in situ electrode thicknesses and electrode porosities. Additionally, liquid electrolyte saturation at the catalyst layer is found to play a dominant role in determining the mass transport, resulting in a decreased electrolyzer performance with low electrode porosity. Finally, the systematic investigation in this study improves the understanding of the transport dynamics in MEA-based devices and provides insights into optimizing device design parameters for industry-relevant CO 2 electrolysis.

30 DIRECT ENERGY CONVERSION↗

Interfacial Charge Transfer Pathways in Photoelectrochemical H 2 Evolution by a Single-Component Molecular Catalyst on a Conductive Metal Oxide

Dye-sensitized photoelectrosynthesis cells traditionally combine a photosensitizing dye to harvest light and a catalyst to generate chemical fuels on a semiconductor. Here, in this work, a photoactive catalyst capable of both light absorption and fuel formation, [Cp*Ir(4,4′-Y 2 -bpy)Cl][Cl] (Cp* = pentamethylcyclopentadienyl, bpy = 2,2′-bipyridine, Y = CH 2 PO 3 H 2 ), is anchored to a mesoporous tin-doped indium oxide (ITO) electrode and facilitates photoelectrochemical H 2 evolution in water without the need for additional photosensitizers or sacrificial reductants. Spectroelectrochemistry indicates a single-site H 2 evolution mechanism involving charge injection to ITO, in contrast to the bimetallic mechanism observed in solution. Cyclic voltammetry and variable-potential chronoamperometry under illumination probe competing pathways via interfacial electron transfer between the Ir hydride excited state and the conductive ITO electrode. A Marcus theory framework provides reorganization energies for competing interfacial electron transfer pathways from potential-dependent quantum yield measurements. The light-driven H 2 evolution catalysis on conducting oxide proceeds with high Faradaic efficiency and current densities comparable to photoelectrodes utilizing p-type semiconductors. By uncovering the principal electron transfer pathways that govern photocatalytic efficiency, this study establishes design principles for hybrid molecular photoelectrocatalysts.

catalysts↗

Electron-Selective TiO 2 Contact for Cu(In,Ga)Se 2 Solar Cells

The non-toxic and wide bandgap material TiO 2 is explored as an n-type buffer layer on p-type Cu(In,Ga)Se 2 (CIGS) absorber layer for thin film solar cells. The amorphous TiO 2 thin film deposited by atomic layer deposition process at low temperatures shows conformal coverage on the CIGS absorber layer. Solar cells from non-vacuum deposited CIGS absorbers with TiO 2 buffer layer result in a high short-circuit current density of 38.9 mA/cm 2 as compared to 36.9 mA/cm 2 measured in the reference cell with CdS buffer layer, without compromising open-circuit voltage. The significant photocurrent gain, mainly in the UV part of the spectrum, can be attributed to the low parasitic absorption loss in the ultrathin TiO 2 layer (~10 nm) with a larger bandgap of 3.4 eV compared to 2.4 eV of the traditionally used CdS. Overall the solar cell conversion efficiency was improved from 9.5% to 9.9% by substituting the CdS by TiO 2 on an active cell area of 10.5 mm2. In conclusion, optimized TiO 2 /CIGS solar cells show excellent long-term stability. The results imply that TiO 2 is a promising buffer layer material for CIGS solar cells, avoiding the toxic CdS buffer layer with added performance advantage.

14 SOLAR ENERGY↗

Enhancement in ion beam current with layered-glows in a constricted dc plasma ion source

High current mode has been discovered and investigated in a constricted dc plasma ion source. As discharge currents exceed a certain threshold, voltage to sustain the constricted dc plasma suddenly falls down to almost half of the value. In this sense, constricted dc plasmas can be sustained at much higher current than in conventional mode operation at a fixed discharge voltage. Phenomenally, several discrete layered-glows are created between an anode glow and a cathode glow. The layers are thin and divided by dark spaces where charged particles can be accelerated. In this high current mode, ion beam current density is about 100 times higher than in conventional mode at the same voltage. It is noteworthy that lower gas pressure is desirable to sustain the layered-glow mode, which is also profitable for ion source in terms of differential pumping. Ion current density exceeds 300 mA/cm{sup 2} at low discharge power of 175 W where ion density of plasma ball is estimated to be over 3.7x10{sup 12} cm{sup -3}.

43 PARTICLE ACCELERATORS↗

Initial experiments using radial foils on the Cornell Beam Research Accelerator pulsed power generator

A novel technique involving radial foil explosions can produce high energy density plasmas. A current flows radially inward in a 5 mum thin aluminum foil from a circular anode, which contacts the foil on its outer rim, to the cathode, which connects to the foil at its geometrical center. When using small 'pin' cathodes (approx1 mm in diameter) on a medium size pulsed-current generator such as the Cornell Beam Research Accelerator, the central magnetic field approaches 400 T, yielding magnetic pressures larger than 0.5 Mbar. While the dynamics is similar to radial wire arrays, radial foil discharges have very distinct characteristics. First a plasma jet forms, with densities near 5x10{sup 18} cm{sup -3}. JxB forces lift the foil upward with velocities of approx200 km/s. A plasma bubble with electron densities superior to 5x10{sup 19} cm{sup -3} then develops, surrounding a central plasma column, carrying most of the cathode current. X-ray bursts coming from the center of this column were recorded at 1 keV photon energy. As the magnetic bubble explodes, ballistic plasma projectiles form and escape with velocities exceeding 300 km/s. Laser shadowgraphy and interferometry, gated extreme ultraviolet imaging and miniature Bdot probes are used to investigate the magnetohydrodynamics properties of such configurations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Terahertz free electron superradiation from mimicking surface plasmons-two electron beams interaction within a 3-mirror quasi-optical cavity

Interaction between mimicking surface plasmons and electron beams provides a good opportunity to develop terahertz (THz) radiation sources. In this paper, such an interaction in a special 3-mirror quasi-optical cavity is presented and explored. The 3-mirror quasi-optical cavity acts as a resonant tunable system, the resonance frequency of which can be tuned by adjusting the distance between mirrors. The study demonstrated THz free electron superradiation from the interaction of mimicking surface plasmons and two electron beams that formed a resonance within the structure, with the 3-mirror cavity enhancing the intensity of superradiation. Moreover, this system can work in the high-harmonic superradiation region with relatively high efficiency and low current density. This concept thus shows the application potential for electron-beam-driven terahertz sources.

43 PARTICLE ACCELERATORS↗

Enhancement in the transport critical current density J{sub c} in YBa{sub 2}Cu{sub 3}O{sub 7−δ} added with an insulating nano crystalline YBa{sub 2}HfO{sub 5.5} perovskite

When a magnetic field is applied to type II superconductors, such as YBa{sub 2}Cu{sub 3}0{sub 7−δ} (YBCO), the flux quanta penetrate the material as a regular array of vortices. However when transport currents are applied, they act to move these vortices, thus lowers the critical current density (J{sub c}) as well as destroying superconductivity. The development of microstructures made of YBCO materials has enabled engineers to increase the critical current density, within Type II materials by introducing flux pinning centres into the material. The microstructure and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7−δ} system with varying levels (0-5 wt. %) of a nano perovskite ceramic insulator; YBa{sub 2}HfO{sub 5.5} addition was studied in detail. Orthorhombic YBa{sub 2}Cu{sub 3}O{sub 7−δ} powder was prepared through conventional solid state route and a modified combustion method was used for synthesizing nanocrystalline YBa{sub 2}HfO{sub 5.5}. The structure and microstructure of the samples examined by X-ray diffraction and scanning electron microscopy showed that YBa{sub 2}HfO{sub 5.5} and YBCO remained unreacted even at higher processing temperature without deteriorating the superconducting properties. The scanning electron microscope image shows that YBa{sub 2}HfO{sub 5.5} forms an electrical-network between grains. These observations suggest that the YBa{sub 2}HfO{sub 5.5} addition to the Y-123-compounds improve the electrical connection between superconducting grains and substantial improvements in the relative electrical transport properties of the composites. The variation of sintering temperature, density, critical transition temperature (T{sub c}) and magnetic field dependence of critical current density (J{sub c}) of YBa{sub 2}Cu{sub 3}O{sub 7−δ} having different proportions of YBa{sub 2}HfO{sub 5.5} in the matrix were also studied in detail. It is found that the addition of these elements considerably enhances the flux pinning strength of the system, and there is also an increase of critical temperature (T{sub c}) and critical current density (J{sub c}) up to an optimum value of 8.76 × 10{sup 4} A/cm{sup 2} for a concentration of 2 wt % addition of nano YBa{sub 2}HfO{sub 5.5}. The enhancement of the critical current density in the YBa{sub 2}Cu{sub 3}O{sub 7−δ} - YBa{sub 2}HfO{sub 5.5} samples is attributed to the sustained formation of the insulating and non-reacting YBa{sub 2}HfO{sub 5.5} phase acting as pinning center. The addition of YBa{sub 2}HfO{sub 5.5} in YBa{sub 2}Cu{sub 3}O{sub 7−δ} bulk superconductor also enhances the pinning force density from 3 ×10{sup 6} N/m{sup 3} to 69.6 × 10{sup 6}N/m{sup 3} at 77 K.

36 MATERIALS SCIENCE↗