Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The middeck 0-gravity dynamics experiment

The Middeck 0-Gravity Dynamics Experiment (MODE), flown onboard the Shuttle STS-48 Mission, consists of three major elements: the Experiment Support Module, a dynamics test bed providing computer experiment control, analog signal conditioning, power conditioning, an operator interface consisting of a keypad and display, experiment electrical and thermal control, and archival data storage: the Fluid Test Article assembly, used to investigate the dynamics of fluid-structure interaction in 0-gravity; and the Structural Test Article for investigating the open-loop dynamics of structures in 0-gravity. Deployable, erectable, and rotary modules were assembled to form three one- and two-dimensional structures, in which variations in bracing wire and rotary joint preload could be introduced. Change in linear modal parameters as well as the change in nonlinear nature of the response is examined. Trends in modal parameters are presented as a function of force amplitude, joint preload, and ambient gravity. An experimental study of the lateral slosh behavior of contained fluids is also presented. A comparison of the measured earth and space results identifies and highlights the effects of gravity on the linear and nonlinear slosh behavior of these fluids.

Crawley, Edward F.↗
DOE OSTI2025

Nanoscale Decoupling of Carrier-Phonon Transport in Carbon Nanotube-Halide Perovskite Heterostructures

In conventional semiconductors, electrical and thermal conductivity are typically coupled, posing a challenge in optimizing both simultaneously. Overcoming this inherent trade-off enables strategies for advancing electronic applications. Herein, a strategy is demonstrated to decouple electrical and thermal conductivity trade-off by creating heterostructures of highly conductive single-walled carbon nanotubes (SWCNTs) coated with low conductivity hybrid perovskites. Coating SWCNTs with methylammonium lead iodide perovskite results in an enhancement in electrical conductivity (408-1266 S cm-1) due to p-type doping followed by a threefold decrease of the in-plane thermal conductivity (3.3-1 W m-1 K-1), compared to pristine SWCNTs. Molecular dynamics simulations uncover phonon boundary scattering at the SWCNT/perovskite interface as well as localization of methylammonium-related and softening of the Pb-I-related phonon modes in methylammonium lead iodide perovskite decreasing the thermal conductivity.

14 SOLAR ENERGY↗
DOE OSTI2019

Crystal structure of the 65-kilodalton amino-terminal fragment of DNA topoisomerase I from the gram-positive model organism Streptococcus mutans

Here, we report the first structure of topoisomerase I determined from the gram-positive bacterium, S. mutans. Bacterial topoisomerase I is an ATP-independent type 1A topoisomerase that uses the inherent torsional strain within hyper-negatively supercoiled DNA as an energy source for its critical function of DNA relaxation. Interest in the enzyme has gained momentum as it has proven to be essential in various bacterial organisms. In order to aid in further biochemical characterization, the apo 65-kDa amino-terminal fragment of DNA topoisomerase I from the gram-positive model organism Streptococcus mutans was crystalized and a three-dimensional structure was determined to 2.06 Å resolution via x-ray crystallography. The overall structure illustrates the four classic major domains that create the traditional topoisomerase I “lock” formation comprised of a sizable toroidal aperture atop what is considered to be a highly dynamic body. A catalytic tyrosine residue resides at the interface between two domains and is known to form a 5’ phosphotyrosine DNA-enzyme intermediate during transient single-stranded cleavage required for enzymatic relaxation of hyper negative DNA supercoils. Surrounding the catalytic tyrosine residue is the remainder of the highly conserved active site. Within 5 Å from the catalytic center, only one dissimilar residue is observed between topoisomerase I from S. mutans and the gram-negative model organism E. coli. Immediately adjacent to the conserved active site, however, S. mutans topoisomerase I displays a somewhat unique nine residue loop extension not present in any bacterial topoisomerase I structures previously determined other than that of an extremophile.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Influence of Substrates on the Long-Range Order of Photoelectrodeposited Se–Te Nanostructures

The long-range order of anisotropic phototropic Se–Te films grown electrochemically at room temperature under uniform-intensity, polarized, incoherent, near-IR illumination has been investigated using crystalline (111)-oriented Si substrates doped degenerately with either p- or n-type dopants. Fourier-transform (FT) analysis was performed on large-area images obtained with a scanning electron microscope, and peak shapes in the FT spectra were used to determine the pattern fidelity in the deposited Se–Te films. Under nominally identical illumination conditions, phototropic films grown on p + -Si(111) exhibited a higher degree of anisotropy and a more well-defined pattern period than phototropic films grown on n + -Si(111). Similar differences in the phototropic Se–Te deposit morphology and pattern fidelity on p + -Si versus n + -Si were observed when the deposition rate and current densities were controlled for by adjusting the deposition parameters and illumination conditions. The doping-related effects of the Si substrate on the pattern fidelity of the phototropic Se–Te deposits are ascribable to an electrical effect produced by the different interfacial junction energetics between Se–Te and p + -Si versus n+-Si that influences the dynamic behavior during phototropic growth at the Se–Te/Si interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhanced Interfacial Bonding of Graft Copolymers

To understand how thermoplastic welding strength can be tuned through chemical modifications and macromolecular topology, we combined coarse-grained molecular dynamics (MD) simulations with experimental validation. Our simulations examined the diffusion dynamics of both linear and graft polymers across representative interfaces, revealing that diffusion-controlled interdigitation follows a power law, with the exponent decreasing from 0.34 to 0.11 as grafting density increases from 7.5 to 196% (with side chains grafted to both sides of a monomer unit). The addition of side chains enhances welding efficiency, as dense bottlebrush polymers with high grafting density reach maximum rupture strength faster than linear polymers. However, their saturated rupture strength is lower. This observation is subsequently corroborated by experimental lap-shear tests comparing linear polyethylene with octene grafted polyethylene elastomers. Our MD simulations show that unlike linear polymers, where backbone entanglements dominate, the grafted side chains introduce mechanisms in addition to entanglement dilution. The rapid interdigitation of side chains creates a dense mesh of entropic van der Waals contacts, which can also enhance the film welding. Furthermore, our MD simulations reveal a brittle rupture behavior in linear and comb-like (mildly grafted) polymers, while bottlebrush (densely grafted) polymers display elastomeric behavior with a pronounced stress plateau prior to fracture. Our simulations deconvolute the influence of polymer topology on deformation behavior. The rate of polymer deformation becomes lower than the applied strain rate prior to rupture, and the onset of this deviation is progressively delayed from linear to bottlebrush polymers. This trend highlights the critical role of molecular architecture in governing the mechanical response. In conclusion, these results provide deeper insight into the underlying welding mechanisms of topological polymers and present a potential approach for mitigating the interface anisotropy that is inherent in advanced manufacturing techniques such as fused filament fabrication.

graft copolymers↗
DOE OSTI2019

Preferential Paths of Air-water Two-phase Flow in Porous Structures with Special Consideration of Channel Thickness Effects

Accurate understanding and predicting the flow paths of immiscible two-phase flow in rocky porous structures are of critical importance for the evaluation of oil or gas recovery and prediction of rock slides caused by gas-liquid flow. A 2D phase field model was established for compressible air-water two-phase flow in heterogenous porous structures. The dynamic characteristics of air-water two-phase interface and preferential paths in porous structures were simulated. The factors affecting the path selection of two-phase flow in porous structures were analyzed. Transparent physical models of complex porous structures were prepared using 3D printing technology. Tracer dye was used to visually observe the flow characteristics and path selection in air-water two-phase displacement experiments. The experimental observations agree with the numerical results used to validate the accuracy of phase field model. The effects of channel thickness on the air-water two-phase flow behavior and paths in porous structures were also analyzed. The results indicate that thick channels can induce secondary air flow paths due to the increase in flow resistance; consequently, the flow distribution is different from that in narrow channels. This study provides a new reference for quantitatively analyzing multi-phase flow and predicting the preferential paths of immiscible fluids in porous structures.

42 ENGINEERING↗
DOE OSTI2019

Temporal network alignment via GoT-WAVE

Abstract Motivation Network alignment (NA) finds conserved regions between two networks. NA methods optimize node conservation (NC) and edge conservation. Dynamic graphlet degree vectors are a state-of-the-art dynamic NC measure, used within the fastest and most accurate NA method for temporal networks: DynaWAVE. Here, we use graphlet-orbit transitions (GoTs), a different graphlet-based measure of temporal node similarity, as a new dynamic NC measure within DynaWAVE, resulting in GoT-WAVE. Results On synthetic networks, GoT-WAVE improves DynaWAVE’s accuracy by 30% and speed by 64%. On real networks, when optimizing only dynamic NC, the methods are complementary. Furthermore, only GoT-WAVE supports directed edges. Hence, GoT-WAVE is a promising new temporal NA algorithm, which efficiently optimizes dynamic NC. We provide a user-friendly user interface and source code for GoT-WAVE. Availability and implementation http://www.dcc.fc.up.pt/got-wave/ Supplementary information Supplementary data are available at Bioinformatics online.

Aparício, David↗
DOE OSTI2023

A Sparse Distributed Gigascale Resolution Material Point Method

In this paper, we present a four-layer distributed simulation system and its adaptation to the Material Point Method (MPM). The system is built upon a performance portable C++ programming model targeting major High-Performance-Computing (HPC) platforms. A key ingredient of our system is a hierarchical block-tile-cell sparse grid data structure that is distributable to an arbitrary number of Message Passing Interface (MPI) ranks. We additionally propose strategies for efficient dynamic load balance optimization to maximize the efficiency of MPI tasks. Our simulation pipeline can easily switch among backend programming models, including OpenMP and CUDA, and can be effortlessly dispatched onto supercomputers and the cloud. Finally, we construct benchmark experiments and ablation studies on supercomputers and consumer workstations in a local network to evaluate the scalability and load balancing criteria. We demonstrate massively parallel, highly scalable, and gigascale resolution MPM simulations of up to 1.01 billion particles for less than 323.25 seconds per frame with 8 OpenSSH-connected workstations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Heterosynaptic plasticity in memristive and memcapacitive lipid bilayers: A snapshot review

Synaptic plasticity refers to activity-dependent synaptic strengthening or weakening between neurons. It is usually associated with homosynaptic plasticity, which refers to a synaptic junction controlled by interactions between specific neurons. Heterosynaptic plasticity, on the other hand, lacks this specificity. It involves much larger populations of synapses and neurons and can be associated with changes in synaptic strength due to nonlocal alterations in the ambient electrochemical environment. Here, this paper presents specific examples demonstrating how variations in the ambient electrochemical environment of lipid membranes can impact the nonlinear dynamical behaviors of memristive and memcapacitive systems in droplet interface bilayers (DIBs). Examples include the use of pH as a modulatory factor that alters the voltage-dependent memristive behavior of alamethicin ion channels in DIB lipid bilayers, and the discovery of long-term potentiation (LTP) in a lipid bilayer-only system after application of electrical stimulation protocols.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Final Technical Report

This document serves as the final report for United States Department of Energy Basic Energy Sciences Grant DE-FG02-08ER15929, “Computational and Spectroscopic Investigations of the Molecular Scale Structure and Dynamics of Geologically Important Fluids and Mineral-Fluid Interfaces” (R. James Kirkpatrick, P.I., A. O. Yazaydin, co-P.I.). The research under this grant was intimately tied to that supported by the parallel the grant of the same title at Alfred (DOE DE-FG02-10ER16128; Geoffrey M. Bowers, P.I.).

58 GEOSCIENCES↗
DOE OSTI2020

Electronic Structure Theories of Singlet Fission and Multiple Exciton Generation (Final Report)

This DOE grant supported the development of electronic structure theory, algorithms, and computer programs for simulating singlet fission and multiple excision generation processes from Sept. 2013 to Aug. 2018 (which was terminated due to the PI’s departure from Northwestern University to industry). One of the main achievements is the development of the so-called active space decomposition (ASD) method hat describes exciton dynamics in organic semiconductors and spin dynamics in strongly correlated materials. The resulting software was interfaced with the Brilliantly Advanced General Electronic-structure Library (BAGEL) package and widely disseminated to the research community.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

High-Energy Solid-State Lithium Batteries with Organic Cathode Materials (Final Report)

Organic materials made from abundant elements via low-energy processes are emerging as sustainable and low-cost alternatives to transition metal oxides as the electrode materials for high- energy batteries in the wake of supply chain and environmental issues associated with critical materials during the transition to clean energy. Organic insertion materials (OIMs) offer material- level energy comparable to transition metal oxides, but they have durability difficulties owing to dissolving in common liquid electrolytes. Combining ceramic-based solid electrolytes with organic electrode materials is one intriguing solution. The goal of this project is to design and synthesize high-energy OIMs, to understand the chemical dynamics and mechanical properties at the OIM-sulfide interface during electrochemical cycling, and to develop methods for constructing the optimum cathode microstructure, which will lead to improved electrochemical performance. The project team has accomplished the following over the last four years: (a) demonstrating that the mechanical softness of organic electrode materials is uniquely beneficial in suppressing crack formation at the electrode-electrolyte interface during cell operation; (b) understanding the interaction between cathode microstructure and the mechanical properties of individual components; and (c) establishing predictive control of cathode microstructure by tuning the mechanical properties of solid electrolytes and OIMs; (d) determining the chemical combability of sulfide electrolyte with high-energy OIMs and finally (f) laying out a road map toward a specific energy of 500 Wh kg -1 for solid-state lithium batteries. 14 publications resulted from this project.

25 ENERGY STORAGE↗
NASA NTRS1980

LSS/propulsion interactions studies

Interactions between the LSS and the propulsion system are large, significant, interrelated, and complex. Issues and problems in interfacing include the effects on the structure from static, dynamic, and launch loads, control, thrust distribution, throttling, and the environment. Control interaction, the disposal of debris/obsolete spacecraft, and the constraints of launch to low Earth orbit must also be considered.

Spurlock, O. F.↗
NASA NTRS1983

Wind turbine generator interaction with diesel generators on an isolated power system

The results of a dynamic interaction investigation to characterize any disturbances caused by interfacing the Mod 0A wind turbine (150 kW configuration) with the Block Island utility diesel generator grid are reported. The tests were run when only two diesel generators were on line, and attention was given to power, frequency, and voltage time profiles. The interconnected system was examined in the start-up and synchronization phase, normal shutdown and cut-out of the wind turbine, during fixed pitch generation, and during variable pitch operation. Governors were installed on the diesel generators to accommodate the presence of wind-derived electricity. The blade pitch control was set to maintain power at 150 kW or below. Power and voltage transients were insignificant during start-up and shutdown, and frequency aberrations were within the range caused by load fluctuations. It is concluded that wind turbine generation can be successfully implemented by an isolated utility, even with a significant penetration to the total grid output.

Scott, G. W.↗
NASA NTRS1984

Composite Fracture Toughness and Impact Characterization

The basic threat to the more widespread use of composites in aircraft primary structure is the problem of residual strength in the presence of damage. Specific problem areas that need to be addressed include the following: (1) modeling/understanding composite failure (impact: relate strain energy release rate to strain-to-failure, open hole compression: relate shear crippling to strain-to-failure, and account for variables such as thickness and stacking sequence); (2) micromechanics models; (3) consider the use of hybrid combinations, both interply and intraply, using graphite, Kevlar, and glass; and (4) modeling/understanding the role of the interface. Solving these problems involves a multidisciplinary approach including dynamics, structural stability, composite mechanics, and fracture mechanics.

Source record↗
NASA NTRS1986

A Riemann solver based on a global existence proof for the Riemann problem

Godunov's method and several other methods for computing solutions to the equations of gas dynamics use Riemann solvers to resolve discontinuities at the interface between cells. A new method is proposed here for solving the Riemann problem based on a global existence proof for the solution to the Riemann problem. The method is found to be very reliable and computationally efficient.

Dutt, P.↗
NASA NTRS1989

The KALI multi-arm robot programming and control environment

The KALI distributed robot programming and control environment is described within the context of its use in the Jet Propulsion Laboratory (JPL) telerobot project. The purpose of KALI is to provide a flexible robot programming and control environment for coordinated multi-arm robots. Flexibility, both in hardware configuration and software, is desired so that it can be easily modified to test various concepts in robot programming and control, e.g., multi-arm control, force control, sensor integration, teleoperation, and shared control. In the programming environment, user programs written in the C programming language describe trajectories for multiple coordinated manipulators with the aid of KALI function libraries. A system of multiple coordinated manipulators is considered within the programming environment as one motion system. The user plans the trajectory of one controlled Cartesian frame associated with a motion system and describes the positions of the manipulators with respect to that frame. Smooth Cartesian trajectories are achieved through a blending of successive path segments. The manipulator and load dynamics are considered during trajectory generation so that given interface force limits are not exceeded.

Backes, Paul↗
NASA NTRS1991

Longitudinal and transverse modes of slosh wave excitation in rotating dewar associated with gravity jitters

Characteristics of slosh waves based on the dynamical behavior of oscillations at the liquid-vapor interface have been investigated. Twelve case studies of slosh wave excitation due to various frequencies of gravity jitters under different rotating speeds of the propellant tank and different levels of background gravity environment have been simulated. The study shows that slosh waves excited inside the spacecraft propellant tank are characterized by the lowest frequency of the waves initiated, frequencies of the gravity jitters imposed on the propellant system, the levels of background gravity environment, and dewar rotating speeds. Conditions for suppression and amplification of the slosh waves are discussed.

Hung, R. J.↗