Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEE MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Our Future Nuclear Data Needs

A well-established knowledge of nuclear phenomena including fission, reaction cross sections, and structure/decay properties is critical for applications ranging from the design of new reactors to nonproliferation to the production of radioisotopes for the diagnosis and treatment of illness. However, the lack of a well-quantified, predictive theoretical capability means that most nuclear observables must be measured directly and used to calibrate empirical models, which in turn provide the data needed for these applications. In many cases, either there is a lack of data needed to guide the models or the results of the different measurements are discrepant, leading to the development of evaluation methodologies to provide recommended values and uncertainties. In this review, we describe the nuclear data evaluation process and the international community that carries it out. We then discuss new measurements and improved theory and/or modeling needed to address future challenges in applied nuclear science.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Assessment of Climate Change Impacts on Future Wind Power in the United States (Siemens CRADA Task 4 Final Report)

One key element required for long-term planning of wind energy deployment is an assessment of the impact of climate change on wind resources. This report investigates the impact of climate change on future wind resources in the United States. Specifically, two sets of long-range (20-year) regional climate model (RCM) simulations, driven by the National Center for Atmospheric Research (NCAR) global climate model (GCM) simulations, were performed in the Weather Research and Forecasting (WRF) atmospheric modeling system.

17 WIND ENERGY↗

Development of a standardized control module for dc-to-dc converters

The electrical performance of a power processor depends on the quality of its control system. Most of the existing control circuits suffer one or more of the following imperfections that tend to restrict their respective utility: (1) inability to perform different modes of duty cycle control; (2) lack of immunity to output filter parameter changes, and (3) lack of capability to provide power component stress limiting on an instantaneous basis. The three lagging aspects of existing control circuits have been used to define the major objectives of the current Standardized Control Module (SCM) Program. Detailed information on the SCM functional block diagram, its universality, and performance features, circuit description, test results, and modeling and analysis efforts are presented.

Yu, Y.↗

Reliability bounds for fault-tolerant systems with competing responses to component failures

Bounds are established on the probability of system failure for fault-tolerant systems of the type used, for example, in aviation control. Event series leading to system failure are assumed to follow a semi-Markov model in which the potential sojourn times associated with component failures have exponential distributions and those associated with system responses have distributions with unspecified form. A product form of the bounds is derived by using a model that provides for multiple competing system responses to component failures.

Lee, L. D.↗

On the anomalous component

The so-called anomalous cosmic ray component, which occurs at energies of about 10 MeV/nucleon and consists only of He, N, O, and Ne, has been a subject of interest for more than a decade. The origin of this component is generally considered to be interstellar neutral gas that is ionized and accelerated in the solar wind. The mechanism and the location for the acceleration, however, remains an unsolved problem. A model is used which includes the effects of gradient and curvature drifts and considers the implications of observed spatial gradients of the anomalous component for the location of the acceleration region. It is concluded that if drifts are important the acceleration region cannot lie at the solar poles. It is also concluded that there is no single region for the acceleration which can account for both the observed intensities and gradients in models which include drift effects.

Potgieter, M. S.↗

Reliability bounds for fault-tolerant systems with competing responses to component failures

Bounds are established on the probability of system failure for fault-tolerant systems of the type used, for example, in aviation control. Event series leading to system failure are assumed to follow a semi-Markov model in which the potential sojourn times associated with component failures have exponential distributions and those associated with system responses have distributions with unspecified form. A product form of the bounds is derived by using a model that provides for multiple competing system responses to component failures.

Lee, L. D.↗

A simple model for the interaction of planetary and synoptic-scale waves in the troposphere

The time-mean circulation of the troposphere during the Northern hemisphere winter is dominated by planetary-scale stationary waves superposed on longitudinal-mean westerly flow. The movement and generation of weather-making, synoptic-scale transient waves are controlled by this large-scale circulation. The interannual variablity of planetary scale waves determines the severity of the winter season over broad geographic regions through such factors as frequency of storms, precipitation and temperature. A conceptual model that incorporates these feedbacks between the two scales is developed and guides the formulation of the quantitative low-order model which retains a few basic physical processes and wave components. In the low-order model the fluxes of sensible heat and momentum and latent heat release by transient eddies are parameterized in terms of the evolving large-scale circulation. Radiative forcing and damping, planetary-scale variations in moisture and topography and Ekman dissipation are also included. Testing of this model is in progress. The results will help interpret experiments from sophisticated general-circulation models and ascertain the need for satellite observations of precipitation.

Branscome, Lee E.↗

New methods and results for quantification of lightning-aircraft electrodynamics

The NASA F-106 collected data on the rates of change of electromagnetic parameters on the aircraft surface during over 700 direct lightning strikes while penetrating thunderstorms at altitudes from 15,000 t0 40,000 ft (4,570 to 12,190 m). These in situ measurements provided the basis for the first statistical quantification of the lightning electromagnetic threat to aircraft appropriate for determining indirect lightning effects on aircraft. These data are used to update previous lightning criteria and standards developed over the years from ground-based measurements. The proposed standards will be the first which reflect actual aircraft responses measured at flight altitudes. Nonparametric maximum likelihood estimates of the distribution of the peak electromagnetic rates of change for consideration in the new standards are obtained based on peak recorder data for multiple-strike flights. The linear and nonlinear modeling techniques developed provide means to interpret and understand the direct-strike electromagnetic data acquired on the F-106. The reasonable results obtained with the models, compared with measured responses, provide increased confidence that the models may be credibly applied to other aircraft.

Pitts, Felix L.↗

Dendritic solidification of alloys in low gravity

The effect of low gravity during solidification on primary and secondary dendrite spacings is investigated. Dendritic spacing data for iron-carbon-type alloys and superalloys which were directionally solidified during aircraft low-g trajectories are examined. The low-g data data are compared with data for metal model materials and binary alloys, and theoretical models to explain the dendritic spacing are considered.

Curreri, P. A.↗

Distortion of homogeneous turbulence by axisymmetric strain and dilatation

Rapid distortion theory is applied to study distortion of homogeneous turbulence subject to two different axisymmetric strain modes: the axisymmetric contraction (AC, nozzle-type flow), and the axisymmetric expansion (AE, diffuser-type flow). The paper explores the differences in effects of the two axisymmetric strain modes on the anisotropy of correlations and structures of turbulence; examines the effect of dilatation on the distortion of turbulence; and provides a theoretical background for turbulence model development. It is found that velocity and vorticity fluctuations are enhanced more efficiently by contraction than by expansion; contraction produces much higher anisotropy in velocity and vorticity than expansion; root-mean-square pressure is slightly reduced during contraction, whereas it increases rapidly during expansion; and vortical structures of rodlike shape develop in a contraction flow, while disklike structures develop in an expansion flow. A simple model that reflects the dependence of turbulence evolution on structural parameters such as the Reynolds-stress anisotropy and total strain is proposed, and is shown to outperform all other models for all cases examined, regardless of the mean strain rate.

Lee, Moon Joo↗

The Aviation System Analysis Capability Airport Capacity and Delay Models

The ASAC Airport Capacity Model and the ASAC Airport Delay Model support analyses of technologies addressing airport capacity. NASA's Aviation System Analysis Capability (ASAC) Airport Capacity Model estimates the capacity of an airport as a function of weather, Federal Aviation Administration (FAA) procedures, traffic characteristics, and the level of technology available. Airport capacity is presented as a Pareto frontier of arrivals per hour versus departures per hour. The ASAC Airport Delay Model allows the user to estimate the minutes of arrival delay for an airport, given its (weather dependent) capacity. Historical weather observations and demand patterns are provided by ASAC as inputs to the delay model. The ASAC economic models can translate a reduction in delay minutes into benefit dollars.

Lee, David A.↗

A Method for Forecasting the Commercial Air Traffic Schedule in the Future

This report presents an integrated set of models that forecasts air carriers' future operations when delays due to limited terminal-area capacity are considered. This report models the industry as a whole, avoiding unnecessary details of competition among the carriers. To develop the schedule outputs, we first present a model to forecast the unconstrained flight schedules in the future, based on the assumption of rational behavior of the carriers. Then we develop a method to modify the unconstrained schedules, accounting for effects of congestion due to limited NAS capacities. Our underlying assumption is that carriers will modify their operations to keep mean delays within certain limits. We estimate values for those limits from changes in planned block times reflected in the OAG. Our method for modifying schedules takes many means of reducing the delays into considerations, albeit some of them indirectly. The direct actions include depeaking, operating in off-hours, and reducing hub airports'operations. Indirect actions include using secondary airports, using larger aircraft, and selecting new hub airports, which, we assume, have already been modeled in the FAA's TAF. Users of our suite of models can substitute an alternative forecast for the TAF.

Long, Dou↗

Curved Thermopiezoelectric Shell Structures Modeled by Finite Element Analysis

"Smart" structures composed of piezoelectric materials may significantly improve the performance of aeropropulsion systems through a variety of vibration, noise, and shape-control applications. The development of analytical models for piezoelectric smart structures is an ongoing, in-house activity at the NASA Glenn Research Center at Lewis Field focused toward the experimental characterization of these materials. Research efforts have been directed toward developing analytical models that account for the coupled mechanical, electrical, and thermal response of piezoelectric composite materials. Current work revolves around implementing thermal effects into a curvilinear-shell finite element code. This enhances capabilities to analyze curved structures and to account for coupling effects arising from thermal effects and the curved geometry. The current analytical model implements a unique mixed multi-field laminate theory to improve computational efficiency without sacrificing accuracy. The mechanics can model both the sensory and active behavior of piezoelectric composite shell structures. Finite element equations are being implemented for an eight-node curvilinear shell element, and numerical studies are being conducted to demonstrate capabilities to model the response of curved piezoelectric composite structures (see the figure).

Lee, Ho-Jun↗

Effect of Stability on Mixing in Open Canopies

In open canopies, the within-canopy flux from the ground surface and understory can account for a significant fraction of the total flux above the canopy. This study incorporates the important influence of within-canopy stability on turbulent mixing and subcanopy fluxes into a first-order closure scheme. Toward this goal, we analyze within-canopy eddy-correlation data from the old aspen site in the Boreal Ecosystem - Atmosphere Study (BOREAS) and a mature ponderosa pine site in Central Oregon, USA. A formulation of within-canopy transport is framed in terms of a stability- dependent mixing length, which approaches Monin-Obukhov similarity theory above the canopy roughness sublayer. The new simple formulation is an improvement upon the usual neglect of the influence of within-canopy stability in simple models. However, frequent well-defined cold air drainage within the pine subcanopy inversion reduces the utility of simple models for nocturnal transport. Other shortcomings of the formulation are discussed.

Lee, Young-Hee↗

Sensor Data Distribution With Robustness and Reliability: Toward Distributed Components Model

In planetary surface exploration mission, sensor data distribution is required in many aspects, for example, in navigation, scheduling, planning, monitoring, diagnostics, and automation of the field tasks. The challenge is to distribute such data in the robust and reliable way so that we can minimize the errors caused by miscalculations, and misjudgments that based on the error data input in the mission. The ad-hoc wireless network on planetary surface is not constantly connected because of the nature of the rough terrain and lack of permanent establishments on the surface. There are some disconnected moments that the computation nodes will re-associate with different repeaters or access points until connections are reestablished. Such a nature requires our sensor data distribution software robust and reliable with ability to tolerant disconnected moments. This paper presents a distributed components model as a framework to accomplish such tasks. The software is written in Java and utilized the available Java Message Services schema and the Boss implementation. The results of field experimentations show that the model is very effective in completing the tasks.

Alena, Richard L.↗