Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Correlations to predict frictional pressure loss of hydraulic-fracturing slurry in coiled tubing

Compared with conventional-tubing fracturing, coiled-tubing (CT) fracturing has several advantages. CT fracturing has become an effective stimulation technique for multizone oil and gas wells. It is also an attractive production-enhancement method for multiseam coalbed-methane wells, and wells with bypassed zones. The excessive frictional pressure loss through CT has been a concern in fracturing. The small diameter of the string limits the cross-sectional area open to flow. Furthermore, the tubing curvature causes secondary flow and results in extra flow resistance. This increased frictional pressure loss results in high surface pumping pressure. The maximum possible pump rate and sand concentration, therefore, have to be reduced. To design a CT fracturing job properly, it is essential to predict the frictional pressure loss through the tubing accurately. This paper presents correlations for the prediction of frictional pressure loss of fracturing slurries in straight tubing and CT. They are developed on the basis of full-scale slurry-flow tests with 11/2-in. CT and slurries prepared with 35 lbm/1,000 gal of guar gel. The extensive experiments were conducted at the full-scale CT-flow test facility. The proposed correlations have been verified with the experimental data and actual field CT-fracturing data. Case studies of wells recently fractured are provided to demonstrate the application of the correlations. The correlations will be useful to the CT engineers in their hydraulics design calculations.

01 COAL, LIGNITE, AND PEAT↗

A permeability model for coal and other fractured, sorptive-elastic media

This paper describes the derivation of a new equation that can be used to model the permeability behavior of a fractured, sorptive-elastic medium, such as coal, under variable stress conditions. The equation is applicable to confinement pressure schemes commonly used during the collection of permeability data in the laboratory. The model is derived for cubic geometry under biaxial or hydrostatic confining pressures. The model is designed to handle changes in permeability caused by adsorption and desorption of gases onto and from the matrix blocks in fractured media. The model equations can be used to calculate permeability changes caused by the production of methane (CH{sub 4}) from coal as well as the injection of gases, such as carbon dioxide, for sequestration in coal. Sensitivity analysis of the model found that each of the input variables can have a significant impact on the outcome of the permeability forecast as a function of changing pore pressure, thus, accurate input data are essential. The permeability model also can be used as a tool to determine input parameters for field simulations by curve fitting laboratory-generated permeability data. The new model is compared to two other widely used coal-permeability models using a hypothetical coal with average properties.

01 COAL, LIGNITE, AND PEAT↗

Effects of high pressure-dependent leakoff and high process-zone stress in coal-stimulation treatments

Hydraulic fracturing in coals has been studied extensively over the last two decades; however, there are factors that were often ignored or incorrectly diagnosed, resulting in screenouts. Assuming that a majority of the perforations are open and there are no problems with the stimulation fluids, screenouts during coal hydraulic-fracture treatments can be attributed to either high pressure-dependent leakoff (PDL), high process-zone stress (PZS) or in some cases both. The objective of this work is to discuss, help identify, and present solutions to address these reservoir-related issues such that screenouts can be avoided in optimized refracture treatments and new well stimulations. The tools for identifying these reservoir-related parameters include a diagnostic fracture-injection test (DFIT) and a grid-oriented fully functional 3D fracture simulator with shear decoupling. An example for each respective case is presented in this paper. In the first example, in which high PZS was considered to be the dominant reason for screenout or pressure out, the well was restimulated successfully by implementing the solutions presented in this paper. In the second example, in which high PDL was considered to be the main reason for screenout, there were several wells in the same project area that exhibited the same behavior resulting in screenouts. After implementing the solutions presented in this paper to address high PDL, all new wells were stimulated successfully without any issues.

01 COAL, LIGNITE, AND PEAT↗

Capillary pressure and wettability behavior of CO{sub 2} sequestration in coal at elevated pressures

Enhanced coalbed-methane (ECBM) recovery combines recovery of methane (CH{sub 4}) from coal seams with storage of carbon dioxide (CO{sub 2}). The efficiency of ECBM recovery depends on the CO{sub 2} transfer rate between the macrocleats, via the microcleats to the coal matrix. Diffusive transport of CO{sub 2} in the small cleats is enhanced when the coal is CO{sub 2}-wet. Indeed, for water-wet conditions, the small fracture system is filled with water and the rate of CO{sub 2} sorption and CH{sub 4} desorption is affected by slow diffusion of CO{sub 2}. This work investigates the wetting behavior of coal using capillary pressures between CO{sub 2} and water, measured continuously as a function of water saturation at in-situ conditions. To facilitate the interpretation of the coal measurements, we also obtain capillary pressure curves for unconsolidated-sand samples. For medium- and high-rank coal, the primary drainage capillary pressure curves show a water-wet behavior. Secondary forced-imbibition experiments show that the medium-rank coal becomes CO{sub 2}-wet as the CO{sub 2} pressure increases. High-rank coal is CO{sub 2}-wet during primary imbibition. The imbibition behavior is in agreement with contact-angle measurements. Hence, we conclude that imbibition tests provide the practically relevant data to evaluate the wetting properties of coal.

01 COAL, LIGNITE, AND PEAT↗

Sorption-induced permeability change of coal during gas-injection processes

Our study has two features. First, laboratory experiments measured the change of the permeability of coal samples as a function of pore pressure and injected-gas composition at constant effective stress. Second, adsorption-solution theory described adsorption equilibria and aided interpretation. The gases tested include pure methane (CH{sub 4}), nitrogen (N{sub 2}), and carbon dioxide (CO{sub 2}), as well as binary mixture of N{sub 2} and CO{sub 2} of different compositions. The coal pack was initially dry and free of gas, then saturated by each test gas at a series of increasing pore pressures at a constant effective stress until steady state was reached, Thus the amount Of adsorption varied, while the effective stress was held constant. Results show that, (I) permeability decreases with an increase of pore pressure at fixed injection-gas composition, and, (ii) permeability change is a function of the injected-gas composition. As the concentration of CO{sub 2} in the injection gas increases, the permeability of the coal decreases. Pure CO{sub 2} leads to the greatest permeability reduction among all the test gases. However, 10 to 20% by mole of N{sub 2} helps to preserve permeability significantly. According to the mixed-gas adsorption isotherms, adsorption and the selectivity of a particular gas species on coal surfaces is a function of pressure and the gas composition. Therefore, we conclude that loading coal surfaces with adsorbed gas at constant effective stress causes permeability reduction. Finally, gas adsorption and permeability of coal are correlated, simply to extend the usefulness of study results.

01 COAL, LIGNITE, AND PEAT↗

Coalbed-methane pilots - timing, design, and analysis

Four distinct sequential phases form a recommended process for coalbed-methane (CBM)-prospect assessment: initial screening reconnaissance, pilot testing, and final appraisal. Stepping through these four phases provides a program of progressively ramping work and cost, while creating a series of discrete decision points at which analysis of results and risks can be assessed. While discussing each of these phases in some degree, this paper focuses on the third, the critically important pilot-testing phase. This paper contains roughly 30 specific recommendations and the fundamental rationale behind each recommendation to help ensure that a CBM pilot will fulfill its primary objectives of (1) demonstrating whether the subject coal reservoir will desorb and produce consequential gas and (2) gathering the data critical to evaluate and risk the prospect at the next-often most critical-decision point.

01 COAL, LIGNITE, AND PEAT↗

Design and life-cycle considerations for unconventional-reservoir wells

This paper provides an overview of design and life-cycle considerations for certain unconventional-reservoir wells. An overview of unconventional-reservoir definitions is provided. Well design and life-cycle considerations are addressed from three aspects: upfront reservoir development, initial well completion, and well-life and long-term considerations. Upfront-reservoir-development issues discussed include well spacing, well orientation, reservoir stress orientations, and tubular metallurgy. Initial-well-completion issues include maximum treatment pressures and rates, treatment diversion, treatment staging, flowback and cleanup, and dewatering needs. Well-life and long-term discussions include liquid loading, corrosion, refracturing and associated fracture reorientation, and the cost of abandonment. These design considerations are evaluated with case studies for five unconventional-reservoir types: shale gas (Barnett shale), tight gas (Jonah feld), tight oil (Bakken play), coalbed methane (CBM) (San Juan basin), and tight heavy oil (Lost Hills field). In evaluating the life cycle and design of unconventional-reservoir wells, 'one size' does not fit all and valuable knowledge and a shortening of the learning curve can be achieved for new developments by studying similar, more-mature fields.

01 COAL, LIGNITE, AND PEAT↗

A parametric study on the benefits of drilling horizontal and multilateral wells in coalbed methane reservoirs

Recent years have witnessed a renewed interest in development of coalbed methane (CBM) reservoirs. Optimizing CBM production is of interest to many operators. Drilling horizontal and multilateral wells is gaining Popularity in many different coalbed reservoirs, with varying results. This study concentrates on variations of horizontal and multilateral-well configurations and their potential benefits. In this study, horizontal and several multilateral drilling patterns for CBM reservoirs are studied. The reservoir parameters that have been studied include gas content, permeability, and desorption characteristics. Net present value (NPV) has been used as the yard stick for comparing different drilling configurations. Configurations that have been investigated are single-, dual-, tri-, and quad-lateral wells along with fishbone (also known as pinnate) wells. In these configurations, the total length of horizontal wells and the spacing between laterals (SBL) have been studied. It was determined that in the cases that have been studied in this paper (all other circumstances being equal), quadlateral wells are the optimum well configuration.

01 COAL, LIGNITE, AND PEAT↗

Potential Agricultural Uses of Flue Gas Desulfurization Gypsum in the Northern Great Plains

Flue gas desulfurization gypsum (FGDG) is a byproduct from the combustion of coal for electrical energy production. Currently, FGDG is being produced by 15 electrical generating stations in Alabama, Florida, Indiana, Iowa, Kentucky, Ohio, North Carolina, South Carolina, Tennessee, Texas, and Wisconsin. Much of this byproduct is used in the manufacturing of wallboard. The National Network for Use of FGDG in Agriculture was initiated to explore alternative uses of this byproduct. In the northern Great Plains (North Dakota, South Dakota, and Montana), FGDG has the potential to be used as a Ca or S fertilizer, as an acid soil ameliorant, and for reclaiming or mitigating sodium-affected soils. Greater than 1.4 million Mg of FGDG could initially be used in these states for these purposes. Flue gas desulfurization gypsum can be an agriculturally important resource for helping to increase the usefulness of problem soils and to increase crop and rangeland production. Conducting beneficial use audits would increase the public awareness of this product and help identify to coal combustion electrical generating stations the agriculturally beneficial outlets for this byproduct.

01 COAL, LIGNITE, AND PEAT↗

Cumulative soil chemistry changes from land application of saline-sodic waters

Management of large volumes (60,000 ha-m) of co-production water associated with coal bed natural gas (CBNG) water extraction is a potential concern in the Powder River Basin (PRB) of Wyoming and Montana due to elevated water salinity and sodicity levels. Land application of saline-sodic CBNG water is a common water management method being practiced in the PRB, which can result in deterioration in soil quality. The objective of this study was to evaluate effects from 1 to 4 yr of land application with CBNG water on soil chemical properties at six study sites (fine to loamy, mixed to smectitic, mesic, Ustic Ardisols and Entisols) in the Wyoming PRB region. Changes in chemistry of soils collected from six depths irrigated with CBNG water were compared with representative non-irrigated soils. Applications of CBNG water significantly increased soil EC, SAR, and ESP values (up to 21, 74, and 24 times, respectively) compared with non-irrigated soils. Differences in soil chemical properties between an irrigated and non-irrigated coarse-textured soil were less than that of fine-textured soils, emphasizing texture as an important factor for salinity buildup. Pretreatment of CBNG water using a sulfur burner and application of gypsum and elemental S soil amendments reduced soil pH but did not prevent the build-up of salts and sodium. Study results suggest that current CBNG water management strategies are not as effective as projected. Additional research is needed to develop management strategies appropriate for mitigating adverse effects of CBNG water irrigation.

01 COAL, LIGNITE, AND PEAT↗

Soil and plant responses from land application of saline-sodic waters: Implications of management

Land application of co-produced waters from coalbed natural gas (CBNG) wells is one management option used in the Powder River Basin (PRB) of Wyoming and Montana. Unfortunately the co-produced CBNG waters may be saline and/or sodic. The objective of this study was to examine the effects of irrigation with CBNG waters on soils and plants in the PRB. Soil properties and vegetation responses resulting from 1 to 4 yr of saline sodic water (electrical conductivity (EC) 1.6-4.8 dS m{sup -1} sodium adsorption ratio (SAR), 17-57 mmol L- applications were studied during 2003 and 2004 field seasons on sites (Ustic Torriorthent Haplocambid, Haplargid and Paleargid) representing native range grasslands seeded grass hayfields and alfalfa hayfields. Parameters measured from each irrigated site were compared directly with representative non-irrigated sites. Soil chemical and physical parameters including pH, EC, SAR, exchangeable sodium percent, texture, bulk density, infiltration and Darcy flux rates, were measured at various depth intervals to 120 cm. Mulitple-year applications of saline sodic water produced consistent trends of increased soil EC AND SAR values to depths of 30 cm reduced surface infiltration rates and lowered Darcy flux rates to 120 cm. Significant differences (p {le} 0.05) were determined between irrigated and non-irrigated areas for EC, SAR infiltration rates and Darcy flux (p {le} 0.10) at most sites. Saline sodic CBNG water applications significantly increased native perennial grass biomass production and cover on irrigated as compared with non-irrigated sites; however overall species evenness decreased. Biological effects were variable and complex reflecting site-specific conditions and water and soil management strategies.

01 COAL, LIGNITE, AND PEAT↗

Salinity and sodicity of weathered minesoils in Northwestern New Mexico and Northeastern Arizona

Evolving relationships between electrical conductivity (EC) and sodium adsorption ratio (SAR) in reconstructed soils at surface mines have been insufficiently documented in the literature. Some minesoils (i.e., rootzone material) are classified as saline, sodic, or saline-sodic and are considered unsuitable for revegetation. Weatherable minerals such as calcite and gypsum are common in alkaline minesoils and on dissolution tend to mitigate elevated SAR levels by maintaining or increasing electrolytes in the soil and providing sources of exchangeable calcium and magnesium. Topsoils (i.e., coversoils) contribute to mitigation of sodic conditions when soluble cations are translocated from coversoils into the underlying minesoils. This study evaluated the weathering characteristics of minesoils sites from three surface coal mines in northwestern New Mexico and northeastern Arizona. Minesoils were grouped into 11 classes based on EC and SAR. After 6 to 14 yr, differences between upper and lower halves of the coversoils suggest general increases occurred with EC, SAR, chloride (Cl{sup -}), and sulfate (SO{sub 4}{sup 2-}) with depth. Within the reclaimed minesoils, there were several significant (P < 0.05 or < 0.10) relationships among EC and SAR that related to Minesoil Class. Lower SAR levels with corresponding increases in EC compared to baseline minesoils were more apparent in upper minesoil depths (0-5 and 5-15 cm). Minesoil anion concentrations suggested coversoil leachates and gypsum dissolution influenced EC and SAR chemistry. Over time, chemical changes have increased the apparent stability of the saline and sodic reclaimed minesoils studied thereby reducing risks associated with potential aggregate slaking and clay particle dispersion.

01 COAL, LIGNITE, AND PEAT↗

Impact of using paper mill sludge for surface-mine reclamation on runoff water quality and plant growth

Paper mills generate large amounts of solid waste consisting of fibrous cellulose, clay, and lime. Paper mill Sludge (PMS) can improve reclamation of surface-coal mines where low pH and organic-carbon levels in the spoil cover material can inhibit revegetation. When applied at high rates, however, PMS may adversely impact the quality of surface runoff. Therefore, we applied PMS at 0, 224, and 672 dry Mg ha{sup -1} to 22.1 x 4.6-m plots at a recently mined site and monitored runoff for a total of 13 mo. The zero-rate plots served as controls and received standard reclamation consisting of mulching with hay and fertilization at planting. Compared to the control plots, PMS reduced runoff fourfold to sixfold and decreased erosion from 47 Mg ha{sup -1} to < 1 Mg ha{sup -1}. Most of the reduction occurred in the 2.5 mo before the plots were planted. Flow-weighted average dissolved oxygen concentrations in runoff from plots at the 224 and 672 Mg ha{sup -1} rates, however, were much lower ({<=} 0.4 vs. 8.2 mg L{sup -1}) and chemical oxygen demand (COD) was much higher for the 672 Mg ha{sup -1} rate plots than the control plots during the pre-plant period (7229 vs. 880 mg L{sup -1}). There were few noteworthy differences in water quality among treatments post-planting, but plant dry-matter yields were greater for the PMS plots than for the controls. The 672 Mg ha{sup -1} rate did not increase COD or nutrient loads compared to the 224 Mg ha{sup -1} rate and may have more persistent beneficial effects by increasing soil organic carbon levels and pH to a greater extent.

01 COAL, LIGNITE, AND PEAT↗

Environmental impacts and sustainability of degraded water reuse

Greater urban demand for finite water resources to meet domestic, agricultural, industrial, and recreational needs; increased frequency of drought resulting from erratic weather; and continued degradation of available water resources from point and nonpoint sources of pollution have focused attention on the reuse of degraded waters as a potential water source. However, short- and long-term detrimental environmental impacts and sustainability of degraded water reuse are not well known or understood. These concerns led to the organization of the 2007 ASA-CSSA-SSSA Symposium entitled Environmental Impacts and Sustainability of Degraded Water Reuse. Out of this symposium came a special collection of 4 review papers and 12 technical research papers focusing on various issues associated with the reuse of agricultural drainage water, well water generated in the production of natural gas from coalbeds, municipal wastewater and biosolids, wastewater from confined animal operations, urban runoff, and food-processing wastewater. Overviews of the papers, gaps in knowledge, and future research directions are presented. The future prognosis of degraded water reuse is promising, provided close attention is paid to managing constituents that pose short- and long-term threats to the environment and the health of humankind.

01 COAL, LIGNITE, AND PEAT↗

Aggregate-associated carbon and nitrogen in reclaimed sandy loam soils

Minimal research has been conducted on aggregate, C, and N in coarse-textured soils used to reclaim surface coal mine lands. Furthermore, little is known about the contribution different plant communities make to the recovery of aggregation in these soils. Two chronosequences of semiarid reclaimed sites with sandy loam soils were sampled under shrub- and grass-dominated communities. Aggregation, aggregate fractions, and associated C and N were measured. No definitive trends of increasing macroaggregates between sites were observed undershrubs; however, macro- and microaggregation was greater in the 16-yr-old (0.20 and 0.23 kg aggregate kg{sup -1} soil, respectively) than in the 5-yr-old soils (0.02 and 0.08 kg aggregate kg{sup -1} soil, respectively) under grasses. Although C and N concentrations were drastically reduced (50-75%) with mining activity between the <1-yr-old and native soils, aggregate C and N concentrations tinder shrubs and grasses were similar to each other and to the native soils in the 5-yr-old site. Sods under grass in the 16-yr-old site had lower available and aggregate-occluded C and N concentrations than the 5-yr-old site, while C and N concentrations did not change between 5- and 16-yr-old soils under shrubs. Conversely, aggregate C and N pool sizes under shrubs and grasses both increased with site age to conditions similar to those observed in the native soil. Reclaimed shrub site soils had consistently higher C concentrations in the older reclaimed sites (10 and 16 yr old) than the soils under grasses, indicating greater accumulation and retention of C and N in organic material under shrub than grass communities in semiarid reclaimed sites.

01 COAL, LIGNITE, AND PEAT↗

Enhancing carbon and nitrogen sequestration in reclaimed soils through organic amendments and chiseling

The choice of reclamation techniques could affect restoration success, ecosystem productivity, and the capacity of reclaimed mine soil (RMS) to sequester soil organic carbon (SOC). A field experiment was conducted at three reclaimed coal mine sites across eastern Ohio to assess the impact of several reclamation techniques on biomass production, soil properties, and temporal changes in SOC and N pools. Amendments and reclamation practices tested were: normal reclamation practice (NRP, control), cow (Bos taurus) manure (10 Mg ha{sup -1}), mulching with oat straw (15 Mg hat), and chiseling (30-cm depth). At each site, all treatments were applied in triplicate to experimental plots in accord with a randomized complete block design. After 5 yr of restoration, results showed no effect of mulching on any of the soil properties investigated but significant effects of manuring and chiseling. During that period, SOC sequestration rates ranged between 0.6 and 2.8 Mg C ha{sup -1} yr{sup -1}, with the highest rates recorded in the manure-treated plots. Aboveground biomass production, biomass N content, and soil N and SOC pools were also significantly higher in the manure and chiseling treatments, probably due to greater exploration of the soil volume by plant roots and more efficient uptake of water and available nutrients. Ecosystem C (SOC + biomass C) in these two treatments also exceeded that in the NRP by 25 to 27 Mg C ha{sup -}. Thus, manure application and chiseling are effective reclamation practices for restoring RMS.

01 COAL, LIGNITE, AND PEAT↗

Chemical modeling of arsenic(III, V) and selenium(IV, VI) adsorption by soils surrounding ash disposal facilities

Leachate derived from coal ash disposal facilities is a potential anthropogenic source of As and Se to the environment. To establish a practical framework for predicting attenuation and transport of As and Se in ash leachates, the adsorption of As(III), As(V), Se(IV), and Se(VI) had been characterized in prior studies for 18 soils obtained downgradient from ash landfill sites and representing a wide range of soil properties. The constant capacitance model was applied for the first time to describe As(III), As(V), Se(IV), and Se(VI) adsorption on soils as a function of equilibrium solution As(III), As(V), Se(IV), and Se(VI) concentrations. Prior applications of the model had been restricted to describing Se(IV) and As(V) adsorption by soils as a function of solution pH. The constant capacitance model was applied for the first time to describe As(III) and Se(VI) adsorption by soils. The model was able to describe adsorption of these ions on all soils as a function of solution ion concentration by optimizing only one adjustable parameter, the anion surface complexation constant. This chemical model represents an advancement over adsorption isotherm equation approaches that contain two empirical adjustable parameters. Incorporation of these anion surface complexation constants obtained with the constant capacitance model into chemical speciation transport models will allow simulation of soil solution anion concentrations under diverse environmental and agricultural conditions.

01 COAL, LIGNITE, AND PEAT↗