Search NASA⌕ Search

SEARCH · Search NASA

Results for “PATH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Nuclear Safeguards as a Career Path

Presenting along with Introductory Nonproliferation Teaching and Learning Module to provide an intro to working at LANL at Utah State on February 21, 2017.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

On the Path to SunShot - Emerging Issues and Challenges with Integrating High Levels of Solar into the Distribution System

Wide use of advanced inverters could double the electricity-distribution system’s hosting capacity for distributed PV at low costs—from about 170 GW to 350 GW (see Palmintier et al. 2016). At the distribution system level, increased variable generation due to high penetrations of distributed PV (typically rooftop and smaller ground-mounted systems) could challenge the management of distribution voltage, potentially increase wear and tear on electromechanical utility equipment, and complicate the configuration of circuit-breakers and other protection systems—all of which could increase costs, limit further PV deployment, or both. However, improved analysis of distribution system hosting capacity—the amount of distributed PV that can be interconnected without changing the existing infrastructure or prematurely wearing out equipment—has overturned previous rule-of-thumb assumptions such as the idea that distributed PV penetrations higher than 15% require detailed impact studies. For example, new analysis suggests that the hosting capacity for distributed PV could rise from approximately 170 GW using traditional inverters to about 350 GW with the use of advanced inverters for voltage management, and it could be even higher using accessible and low-cost strategies such as careful siting of PV systems within a distribution feeder and additional minor changes in distribution operations. Also critical to facilitating distributed PV deployment is the improvement of interconnection processes, associated standards and codes, and compensation mechanisms so they embrace PV’s contributions to system-wide operations. Ultimately SunShot-level PV deployment will require unprecedented coordination of the historically separate distribution and transmission systems along with incorporation of energy storage and “virtual storage,” which exploits improved management of electric vehicle charging, building energy systems, and other large loads. Additional analysis and innovation are neede

14 SOLAR ENERGY↗

DOE Big Idea Summit III: Solving the Information Technology Challenge Beyond Moore's Law: A New Path to Scaling

This report captures the initial conclusions of the DOE seven National Lab team collaborating on the “Solving the Information Technology Energy Challenge Beyond Moore’s Law” initiative from the DOE Big Idea Summit III held in April of 2016. The seven Labs held a workshop in Albuquerque, NM in late July 2016 and gathered 40 researchers into 5 working groups: 4 groups spanning the levels of the co-design framework shown below, and a 5th working group focused on extending and advancing manufacturing approaches and coupling their constraints to all of the framework levels. These working groups have identified unique capabilities within the Labs to support the key challenges of this Beyond Moore’s Law Computing (BMC) vision, as well as example first steps and potential roadmaps for technology development.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

On the Path to SunShot: Emerging Issues and Challenges in Integrating Solar with the Distribution System.

The U.S. Department of Energy launched the SunShot Initiative in 2011 with the goal of making solar electricity cost-competitive with conventionally generated electricity by 2020. At the time this meant reducing photovoltaic and concentrating solar power prices by approximately 75%— relative to 2010 costs—across the residential, commercial, and utility-scale sectors. To examine the implications of this ambitious goal, the Department of Energy’s Solar Energy Technologies Office (SETO) published the SunShot Vision Study in 2012. The study projected that achieving the SunShot price-reduction targets could result in solar meeting roughly 14% of U.S. electricity demand by 2030 and 27% by 2050—while reducing fossil fuel use, cutting emissions of greenhouse gases and other pollutants, creating solar-related jobs, and lowering consumer electricity bills.

14 SOLAR ENERGY↗

Final Report: Thin Silicon Solar Cells - A Path to 35% Shockley-Queisser Limits

Carrier selective contacts have revolutionized efficiencies of silicon solar cell, with the most recent efficiencies showing 26.3% efficiency. The project has substantially advanced the understanding and state of the art in carrier selective contacts, providing experimental and conceptual advances. Additionally, over the course of the project, there has been increasing interest on the development of silicon based tandems, and the project provided several critical advances that support the development of silicon-based tandems. Key outcomes of the project include: Highest voltage from a carrier selective contact solar cell Demonstration of GaP as a selective carrier contact, using intrinsic a-Si as a membrane layer Demonstration of highest efficiency solar cell using MoOx as a carrier selective contact Fundamental processes in the carrier selective contacts, including advances in understanding transport in carrier selective contact Identification of processes and approaches to circumvent minority carrier lifetime degradation of silicon during growth of III-V’s on silicon Demonstration of approaches to improve absorption in solar cells using improved rear reflectors Improved understanding of processes that control the FF of a solar cell First demonstration of a GaP/Si heterostructure solar cell using GaP as a hetero-emitter

14 SOLAR ENERGY↗

Materials path toward improved energy efficiency for High Energy Physics accelerators

For nearly fifty years researchers working with particle accelerators have envisioned reducing their initial and operating costs by substituting the intermetallic compound Nb 3 Sn for Nb as the cavity interior surface. The goal has remained elusive, stymied especially by the fall of cavity quality factor (representing increasing energy consumption) with increasing gradient (the amount of accelerator need to reach an energy goal). While one research group reported making a few cavities free of the problem, no one has reported how this comes about or has reproduced the improvement. We believe that insufficient understanding is responsible. We report here findings of a detailed, systematic study of the formation of Nb 3 Sn coatings on Nb, relating structure and properties of the coating to the process parameters and substrate materials on the one hand, and RF surface impedance and SRF cavity performance on the other was carried out, focusing on the two step (nucleation – deposition) tin vapor diffusion process. Major outcomes are: The choice of initial surface preparation (BCP etc) has no discernable impact on any quality of the final coating; Though tin chloride serves as the coating nucleant, no trace could be found by any means of chlorine after nucleation or coating; No evidence was found for any substantive impact of the details of the nucleation on the ultimate coating, as long as it was done within the frequently used range; The coating forms as Nb 3 Sn crystals by tin from the vapor diffusing down grain boundaries to the Nb interface and growing there. Higher temperature and longer time lead to larger, but otherwise substantially identical crystals; All coatings exhibited roughness on the micron scale. Testing the effect of coating surface modification technologies in use by the community, only a carefully tailored electropolish showed significant benefit; and, Preliminary results indicate that Ti contamination may be associated with falling gradient. Two particular item appear promising for future work. The effect of surface topography in the range seen here on performance is significant for niobium. The nature and impact on Nb 3 Sn, if any, needs to be understood and managed. At what level Ti, Ta or other impurities affects the performance of Nb 3 Sn needs to be understood.

36 MATERIALS SCIENCE↗

lmprovements and Path Forward for Regulatory Acceptance of SAS4A/SASSYS-1

In the U.S., a key component of the commercialization of advanced reactors is completion of a license application, which must ultimately be approved by the Nuclear Regulatory Commission (NRC). The NRC’s approval of the license application is contingent on, among other things, satisfactory demonstration of the design basis and response to transient and accident scenarios using accepted codes and methods. This effort seeks to improve the regulatory acceptability of the SAS4A/SASSYS-1 advanced reactor design and safety analysis system software by identifying and addressing gaps in the SAS4A/SASSYS-1 documentation basis that support software qualification and dedication. The software’s unique capabilities to assess inherent fast spectrum feedback effects and passive safety features, which facilitate assessment of key safety metrics, position it as a key licensing tool in the field of sodium-cooled fast reactors (SFR).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Proposed Path Forward for Transportation of High-Assay Low-Enriched Uranium

Many of the advanced reactors that are being designed will use high-assay low-enriched uranium (HALEU) as the reactor fuel. HALEU is fuel that is enriched between 5% – 20% uranium-235. With the change to higher enriched material, the industry will have new challenges with the development and regulatory approval of enrichment and fuel fabrication facilities and suitable transportation packages to support the economic use of HALEU materials. One area of concern relates to ensure sub-criticality of the material during transportation as identified by the Nuclear Energy Institute (NEI). To evaluate the relevant work, experts, and industry perspectives on HALEU, a workshop was organized to share relevant experience and insights into HALEU transportation, handling, and management. At the August 30 and 31, 2018 workshop, NEI and industry provided the following recommendations to DOE and the national lab complex. 1. DOE and the lab complex should communicate and educate the Nuclear Regulatory Commission (NRC) on criticality issues related to HALEU. 2. Idaho National Laboratory (INL) should support work needed to certify package design for the transportation of HALEU. a. Suggest amending the Certificate of Compliance of an existing package used for the shipment of commercial quantities. b. Suggest DOE provide funding to package designer(s) for analysis and engineering work for a package to be submitted to NRC for approval. 3. INL should provide specific, or a range, of the expected impurities that will be present in recycled naval fuel. 4. In the longer term, DOE and the lab complex should increase the availability of criticality benchmark data to further reduce conservatism in package design. In addition, a couple key takeaways were identified, including: 1. Although the labs can provide additional criticality experiments, industry has enough data to license facilities, overpacks, and cylinders. Validation from additional critical experiments to establish less uncertainty in the benchmarks will be helpful. 2. A collective effort from industry is needed to express consistency on how much information exists or is needed related to criticality. Based on interactions with industry, DOE, and national laboratories, it appears that large-volume transportation of fresh HALEU appears feasible from a criticality perspective. Specifically, an initial review of applicable criticality benchmark experiments identified numerous applicable experiments. However, a more thorough review of a realistic transportation package design is suggested. Therefore, the following next steps are proposed: 1. Evaluate a large volume package with uranium dioxide enriched to 20%. Specifically, the GNF-A NPC package was proposed as a potentially viable option. 2. Based on the results of (1), determine if additional package designs and fuel material should be evaluated. 3. Based on the results of (1), determine if additional criticality experiments would be beneficial to improve the margins for criticality due to uncertainties. 4. Determine DOE transportation needs (packages sizes, shielding requirements, handling/operational requirements, and timing of availability) related to HALEU. 5. Continue to interface with NEI and interested industry companies to determine the appropriate time to engage the NRC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On the Path to SunShot: Emerging Issues and Challenges in Integrating Solar with the Distribution System

From 2010 through the first half of 2015, the installed capacity of solar photovoltaics (PV) connected to the U.S. distribution system increased sixfold, from approximately 1.8 GW to more than 11 GW. This accounts for over half of the approximate total U.S. solar installations of 20 GW. Distributed generation from PV (DGPV) is expected to comprise 50%–60% of total U.S. PV capacity through at least 2020. The rapid deployment of high penetrations of DGPV into the distribution system has both highlighted challenges and demonstrated many successful examples of integrating higher penetration levels than previously thought possible. In this report, we analyze challenges, solutions, and research needs in the context of DGPV deployment to date and the much higher levels of integration that are expected with the achievement of the U.S. Department of Energy’s SunShot targets.

14 SOLAR ENERGY↗

On the Path to Energy Independence and a Clean Power Future – LED Lighting Retrofit and Solar Power Generation for the CTUIR Science and Engineering Laboratory and Public Transit Center (Rev.1)

This project supports the goals of the Energy Policy for the Confederated Tribes of the Umatilla Indian Reservation (CTUIR) through the implementation of an energy efficiency measure (LED lighting retrofit) and construction of a fixed rack (stationary) ground-mounted solar photovoltaic (PV) array energy generation system. The project objective was to eliminate the net demand for grid-based utility energy at two tribal facilities: the CTUIR Field Station and the Public Transit Center (consisting of bus barn and maintenance shop buildings). A total of 332 lighting fixtures were retrofitted with high efficiency LEDs at the three buildings within the project scope. The solar PV array constructed adjacent to the Field Station (46330 Timine Way, Pendleton, OR 97801) has a nameplate capacity of 97.98 kW DC . The project was managed by staff from the CTUIR Energy & Environmental Sciences Program within the Department of Natural Resources and the final budget was $\$ $288,206. Data was collected during a 12 month monitoring period following construction of the aptly named Ántukš–Tín̓qapapt Solar PV Array and assessed to determine project results. During this time, the solar PV system generated 125,580 kWh of energy according to SolrenView solar PV system monitoring service. In contrast, the total realized utility energy and cost savings due to the project were estimated by comparing 24 months of consecutive utility billing data. Results of this comparison indicate that grid-based utility energy demand was reduced by 121,280 kWh, or roughly 80% of the total electricity consumed by both facilities. The cost savings associated with this energy demand reduction were $\$ $11,104 and a payback period of 5.7 years was estimated for recovering the CTUIR’s investment. However, it should be noted that these figures are not representative of the savings that could be obtained under normal, error-free (i.e. faultless) conditions. Several undesirable events occurred during the 12 month monitoring and evaluation period, the effects of which were quantified using available data so that results under a “Faultless Scenario” could be estimated. Annual energy and cost savings estimated for the Faultless Scenario were approximately 166,289 kWh and $\$ $15,225, respectively. These figures should prove to be more representative of the long-term average annual results achieved in response to the project and suggest a payback period closer to 4.5 years for the CTUIR.

14 SOLAR ENERGY↗

Modeling Salt-Material Interactions in Molten Salt Reactors: Opportunities and Path Forward

A revitalized interest in molten salt reactor technology has resulted in a concerted effort across US based national laboratories and universities to investigate and overcome the remaining scientific and engineering questions facing the industry. This report provides a detailed description of the atomistic modelling techniques that could be employed to investigate the atomic-level forces and behaviors governing salt chemistry and thermodynamics, and the corrosion of container materials in these systems. The molten salt environment is broken down into three unique regions in which atomic behaviors are governed by separate processes and forces. A discussion is given on how each region can be modelled using different computational methods. The objective of the models presented for each region is to understand and quantify the individual atom-to-atom forces driving corrosion processes and changes in salt chemistry. Once these fundamental mechanisms are better understood, larger models, which connect the regions, can be designed to investigate the long-term non-equilibrium behaviors exhibited by these molten salt systems. With a large enough computational effort, employing the modeling techniques discussed in this report to supplement experimental investigations, a greater understanding of the degradation of salt-facing structural materials can be gained, enabling more accurate lifetime prediction, greater safety and regulatory compliance, and faster material innovation.

36 MATERIALS SCIENCE↗

Energy Paths for the Yurok People

This Yurok Tribe energy strategic planning study examined electricity usage, costs and infrastructure, as well as electricity needs on the Reservation. It also assessed the Tribe’s energy resources. Equipped with this information, the project team conducted an energy options analysis that examined different project opportunities and identified key projects that are both feasible to implement and will help the Tribe reach its stated Energy Vision. A key finding of the energy needs assessment is that there are still numerous households that are without grid electric power, and it is likely that most of them will remain disconnected from the grid because of their remoteness. To provide these community members with reliable, affordable, modern energy services their homes will need to be electrified via a robust off-grid energy services program that installs and maintains off-grid energy systems. This is the key need that is explored and addressed in this plan. The approach taken is to establish a new business entity, a Tribal Energy Authority or Utility, that will operate a Tribal Energy Program. The Energy Strategic Plan identifies a number of potential funding sources that could be used to support both the On-grid and Off-grid Energy Programs. This plan also promotes continued efforts to reduce electricity consumption through the implementation of energy efficiency measures in existing facilities and the enforcement of a strong energy-efficient building code for all new construction on the Reservation. Finally, the plan promotes added resilience at critical Tribal facilities on the Reservation by recommending that battery energy storage systems and microgrid controls be coupled with rooftop solar PV systems to create cutting edge microgrid facilities that can provide critical power services to Tribal facilities when the main electric grid is shutdown.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Energy Paths for the Yurok People

The Yurok Tribe has been working for more than two decades to bring adequate, cost-effective energy services to their Tribal members. With the completion of the electric line extension to Wautec, they are well on their way to an effective and sustainable energy future. However, there is still much work to be done; many Tribal households in the Upper Reservation are still without reliable, affordable electric power. Now the Tribe needs to determine the next steps to realize their energy vision. This Yurok Tribe energy strategic planning study examined electricity usage, costs and infrastructure, as well as electricity needs on the Reservation. It also assessed the Tribe’s energy resources. Equipped with this information, the project team conducted an energy options analysis that examined different project opportunities and identified key projects that are both feasible to implement and will help the Tribe reach its stated Energy Vision. There are still numerous households in the Upper Reservation and adjacent lands that are without grid electric power, and it is likely that most of them will remain disconnected from the grid because of their remoteness. To provide these community members with reliable, affordable, modern energy services their homes will need to be electrified via a robust off-grid energy services program that installs and maintains off-grid energy systems. This is the key need that is explored and addressed in this plan.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Simulating Distributed Energy Resource Responses to Transmission System-Level Faults Considering IEEE 1547 Performance Categories on Three Major WECC Transmission Paths

This study performs a large quantity of transmission and distribution simulations for three regions in the Western Interconnection along with final transmission simulations informed by distribution simulation results. Results find that the type of ride-through implemented by distributed energy resources (DERs) is a significant factor to the overall power system response to transmission-level faults. This impact is particularly high for transmission-level faults that depress voltage levels for high numbers of substations (i.e., for cases that experience large regional voltage sags). Because of the programmed nature of the ride-through of IEEE 1547-compliant DERs, the potential for large reductions in real power injection is possible based on IEEE 1547 interpretation and specific implementation. In this study, we made a first attempt to determine the quantity of DERs affected by a variety of transmission-level faults as well as a granular response of distribution-simulated DERs to a few types of IEEE 1547-2003 interpretations and IEEE 1547-2018 voltage ride-through categories. The distribution-informed transmission studies show that the category of IEEE 1547 adherence, particularly with the new 2018 standard, can have a significant impact on the amount of DER-based generation lost following transmission-level fault events.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Paths to Sustainable Distributed Generation through 2050: Matching Local Waste Biomass Resources with Grid, Industrial, and Community Needs

This project identifies and evaluates current and future organic waste fuel types and matches these wastes with local grid, industrial, building power, and thermal energy needs. The team developed data on organic waste streams and thermal energy needs, and then constructed a techno-economic analysis model that can process the data and compute viable production of electricity, waste heat, biogas, and/or biomethane for a range of energy price points. Scenarios generated by the model include allocation of local organic waste streams to existing or new conversion infrastructure and are evaluated in a life-cycle assessment model to determine local and global environmental impacts. The project’s webbased tool provides rapid evaluation of potential waste-to-energy sites, including retrofits/expansions of existing facilities or entirely new construction, on the basis of resource availability, potential for waste heat use, and economic and environmental metrics.

09 BIOMASS FUELS↗

Conceptual Basis and Techno-Economic Modeling for Integrated Algal Biorefinery Conversion of Microalgae to Fuels and Products (2019 NREL TEA Update: Highlighting Paths to Future Cost Goals via a New Pathway for Combined Algal Processing)

The report documents the conceptual basis for a new potential Combined Algal Processing design strategy which may allow more flexibility in accommodating different algal biomass feedstock compositions, by enabling upgrading of both protein and carbohydrates in a single step, without a strict requirement for either component to be in soluble or monomeric form, while maintaining effective wet lipid extraction techniques to enable high lipid recoveries. In light of previously-established constraints around algal biomass costs (which are significantly higher than lignocellulosic terrestrial biomass), the present CAP processing strategy reflects an integrated biorefinery concept producing both fuels and value-added chemical coproducts as a means to improve profitability and generate coproduct revenues to help drive down the minimum fuel selling price (MFSP) towards economically viable levels. Namely, this report highlights an integrated CAP biorefinery process and associated technical targets that would be required to achieve U.S. Department of Energy target MFSP goals of $2.5/gallon gasoline equivalent by 2030. This is accomplished by a process involving low-cost seasonal storage of algal biomass during high-growth seasons, rapid flash hydrolysis pretreatment of the biomass, solvent extraction of pretreated biomass, cleanup and fractionation of lipids into triglyceride and free fatty acid fractions, and a series of thermochemical conversion steps to upgrade carbohydrates and protein to hydrocarbon fuels. These steps include mild oxidative treatment (MOT), a process originally investigated at NREL for upgrading lignin, followed by catalytic ketonization and hydrotreating of MOT products to fuels. Isolated triglycerides are sent to a coproduct train, with the base case focused on upgrading to polyurethane foams as a high-value, high-market-volume coproduct.

09 BIOMASS FUELS↗