Search NASA⌕ Search

SEARCH · Search NASA

Results for “Processing maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Annual Symposium on Machine Processing of Remotely Sensed Data, 4th, Purdue University, West Lafayette, Ind., June 21-23, 1977, Proceedings

Papers are presented on a variety of techniques for the machine processing of remotely sensed data. Consideration is given to preprocessing methods such as the correction of Landsat data for the effects of haze, sun angle, and reflectance and to the maximum likelihood estimation of signature transformation algorithm. Several applications of machine processing to agriculture are identified. Various types of processing systems are discussed such as ground-data processing/support systems for sensor systems and the transfer of remotely sensed data to operational systems. The application of machine processing to hydrology, geology, and land-use mapping is outlined. Data analysis is considered with reference to several types of classification methods and systems.

Morrison, D. B.↗
NASA NTRS1977

Microwave remote sensing from space for earth resource surveys

The concepts of radar remote sensing and microwave radiometry are discussed and their utility in earth resource sensing is examined. The direct relationship between the character of the remotely sensed data and the level of decision making for which the data are appropriate is considered. Applications of active and a passive microwave sensing covered include hydrology, land use, mapping, vegetation classification, environmental monitoring, coastal features and processes, geology, and ice and snow. Approved and proposed microwave sensors are described and the use of space shuttle as a development platform is evaluated.

Source record↗
NASA NTRS1979

Central atlantic regional ecological test site: A prototype regional environmental information system, volume 1

The Central Atlantic Regional Ecological Test Site (CARETS) project was a demonstration project for introducing data from Landsat and high-altitude aircraft sensors into regional land planning and management. This report summarizes the CARETS project results and describes its output of maps, reports, computer tapes, and other products. CARETS used a geographic information system model under which land use maps were prepared from sensor data, then digitized, processed, and linked to other environmental and social data sets, and to environmental consequences such as air pollution, stream runoff, local climatic factors, and coastal erosion. Landsat data showed the test region in 1972 to be nine percent urban and built-up land, 38 percent agriculture, 50 percent forest, three percent nonforested wetlands, and less than one percent barren land, exclusive of water-covered areas. User surveys, conferences, and workshops involving 65 agencies facilitated widespread distribution of data products and produced evaluations concerning their usefulness. We found a heterogeneous user community with diverse information needs largely preferring aerial photographs rather than satellite multispectral scanner data. Among project recommendations are establishment of a network of regional land resource information centers, working toward improved compatibility of Federal, State and local information programs supportive of land use decisions.

Land use↗
NASA NTRS1980

Gravity and magnetic anomaly modeling and correlation using the SPHERE program and Magsat data

The spherical Earth inversion, modeling, and contouring software were tested and modified for processing data in the Southern Hemisphere. Preliminary geologic/tectonic maps and selected cross sections for South and Central America and the Caribbean region are being compiled and as well as gravity and magnetic models for the major geological features of the area. A preliminary gravity model of the Andeas Beniff Zone was constructed so that the density columns east and west of the subducted plates are in approximate isostatic equilibrium. The magnetic anomaly for the corresponding magnetic model of the zone is being computed with the SPHERE program. A test tape containing global magnetic measurements was converted to a tape compatible with Purdue's CDC system. NOO data were screened for periods of high diurnal activity and reduced to anomaly form using the IGS-75 model. Magnetic intensity anomaly profiles were plotted on the conterminous U.S. map using the track lines as the anomaly base level. The transcontinental magnetic high seen in POGO and MAGSAT data is also represented in the NOO data.

Braile, L. W.↗
NASA NTRS1984

Reports of Planetary Geology Program, 1983

Several areas of the Planetary Geology Program were addressed including outer solar system satellites, asteroids, comets, Venus, cratering processes and landform development, volcanic processes, aeolian processes, fluvial processes, periglacial and permafrost processes, geomorphology, remote sensing, tectonics and stratigraphy, and mapping.

Henry E Holt↗
NASA NTRS1987

High resolution radar map of the Moon

Previous radar mappings of the Moon at 70 cm wavelength in the late 1960's by Thompson have been replaced with a new set of observations using the 430 MHz radar at the Arecibo Observatory, Puerto Rico. Radar resolution was reduced to 2 to 5 km radar cell size and a beam-sweep, limb-to-limb calibration was conducted. Advances in computer technology provided the principle means of improving lunar radar mapping at this wavelength. Observation techniques and data processing are described and scattering differences found in the orthographic projection of the radar data are discussed.

Thompson, T. W.↗
NASA NTRS1987

Analysis and synthesis of abstract data types through generalization from examples

The discovery of general patterns of behavior from a set of input/output examples can be a useful technique in the automated analysis and synthesis of software systems. These generalized descriptions of the behavior form a set of assertions which can be used for validation, program synthesis, program testing, and run-time monitoring. Describing the behavior is characterized as a learning process in which the set of inputs is mapped into an appropriate transform space such that general patterns can be easily characterized. The learning algorithm must chose a transform function and define a subset of the transform space which is related to equivalence classes of behavior in the original domain. An algorithm for analyzing the behavior of abstract data types is presented and several examples are given. The use of the analysis for purposes of program synthesis is also discussed.

Wild, Christian↗
NASA NTRS1989

Frame of reference for electronic maps - The relevance of spatial cognition, mental rotation, and componential task analysis

Three experiments are reported that examine the difference between north-up and track-up maps for airborne navigation. The results of the first two experiments, conducted in a basic laboratory setting, identified the cost associated with mental rotation, when a north-up map is used. However, the data suggest that these costs are neither large nor consistent. The third experiment examined a range of tasks in a higher fidelity helicopter flight simulation, and associated the costs of north-up maps with a cognitive component related to orientation, and the costs of track-up maps with a cognitive component related to inconsistent landmark location. Different tasks are associated with different dependence on these components. The results are discussed in terms of their implications for map design, and for cognitive models of navigational processes.

Wickens, Christopher D.↗
NASA NTRS1991

Stereoscopic Video Weld-Seam Tracker

Stereoscopic video camera and laser illuminator operates in conjunction with image-data-processing computer to locate weld seam and to map surface features in vicinity of seam. Intended to track seams to guide placement of welding torch in automatic welding system and to yield information on qualities of welds. More sensitive than prior optical seam trackers and suitable for use in production environment. Tracks nearly invisible gap between butted machined edges of two plates.

Kennedy, Larry Z.↗
NASA NTRS1991

A PC-based hardware implementation of the maximum-likelihood classifier for the Shuttle Ice Detection System

A PC-based near-real time implementation of a two-channel maximum-likelihood classifier is described. The statistical distribution of the reflectance characteristics of ice, frost, and water formation on spray-on-foam-insulation, which covers the External Tank surface of the Space Shuttle, is acquired. The classification technique is based on these statistics. The computer, set in either a training or a classifying mode, learns the statistics of the various classes, or produces a color-coded image denoting the respective categories of classification. The classified results are memory-mapped for efficiency. The speed of the classification process is only limited by the speed of the digital frame grabber and the software that interfaces the frame grabber to the monitor. The process took 4 seconds for a 512 x 480 pixel image.

Jaggi, S.↗
NASA NTRS1992

Recent progress towards developing a high field, high-T(sub c) superconducting magnet for magnetic suspension and balance systems

This paper reviews superconducting magnets and high T(sub c) superconducting oxide ceramic materials technology to identify areas of fundamental impasse to the fabrication of components and devices that tap what are believed to be the true potential of these new materials. High T(sub c) ceramics pose problems in fundamentally different areas which need to be solved unlike low T(sub c) materials. The authors map out an experimental plan designed to research process technologies which, if suitably implemented, should allow these deficiencies to be solved. Finally, assessments are made of where and on what regimes magnetic system designers should focus their attention to advance the practical development of systems based on these new materials.

Derochemont, L. Pierre↗
NASA NTRS1991

Dual frequency along-track interferometry

In recent months, the JPL Airborne Synthetic Aperture Radar (AIRSAR) System has had a C-band Along-Track Interferometer installed. This, in addition to the L-band interferometer already operating in the system, makes it possible to simultaneously acquire two frequency interferometer data. Also, another upgrade involving the radar digital system allows each interferometer to be operated in such a way as to obtain two along-track interferometric baselines differing by a factor of 2 in length. An engineering checkout flight has demonstrated the ability to acquire and process both frequencies to high-resolution velocity maps of the ocean surface. The status of these interferometers and some initial data are presented.

Carande, R. E.↗
NASA NTRS1995

Millimeter-wave imaging radiometer data processing and development of water vapor retrieval algorithms

This document describes the current status of Millimeter-wave Imaging Radiometer (MIR) data processing and the technical development of the first version of a water vapor retrieval algorithm. The algorithm is being used by NASA/GSFC Microwave Sensors Branch, Laboratory for Hydrospheric Processes. It is capable of a three dimensional mapping of moisture fields using microwave data from airborne sensor of MIR and spaceborne instrument of Special Sensor Microwave/T-2 (SSM/T-2).

Chang, L. Aron↗
NASA NTRS1997

STS-87 Day 11 Highlights

On this eleventh day of the STS-87 mission, the flight crew, Cmdr. Kevin R. Kregel, Pilot Steven W. Lindsey, Mission Specialists Winston E. Scott, Kalpana Chawla, and Takao Doi, and Payload Specialist Leonid K. Kadenyuk continue to look at how plant growth and composite materials are affected by microgravity. The astronauts will use the Middeck Globebox Facility to process samples for the Particle Engulfment and Pushing by a Solid/Liquid Interface experiment. PEP is studying the formation of composite materials, attempting to accurately map the roles of gravity-induced convection and sedimentation in the process by removing the gravity from the equation.

Source record↗
NASA NTRS1998

Bi-Level Integrated System Synthesis (BLISS)

BLISS is a method for optimization of engineering systems by decomposition. It separates the system level optimization, having a relatively small number of design variables, from the potentially numerous subsystem optimizations that may each have a large number of local design variables. The subsystem optimizations are autonomous and may be conducted concurrently. Subsystem and system optimizations alternate, linked by sensitivity data, producing a design improvement in each iteration. Starting from a best guess initial design, the method improves that design in iterative cycles, each cycle comprised of two steps. In step one, the system level variables are frozen and the improvement is achieved by separate, concurrent, and autonomous optimizations in the local variable subdomains. In step two, further improvement is sought in the space of the system level variables. Optimum sensitivity data link the second step to the first. The method prototype was implemented using MATLAB and iSIGHT programming software and tested on a simplified, conceptual level supersonic business jet design, and a detailed design of an electronic device. Satisfactory convergence and favorable agreement with the benchmark results were observed. Modularity of the method is intended to fit the human organization and map well on the computing technology of concurrent processing.

Sobieszczanski-Sobieski, Jaroslaw↗
NASA NTRS1999

Tidal Energy Available for Deep Ocean Mixing: Bounds from Altimetry Data

Maintenance of the large-scale thermohaline circulation has long presented an interesting problem. Observed mixing rates in the pelagic ocean are an order of magnitude too small to balance the rate at which dense bottom water is created at high latitudes. Recent observational and theoretical work suggests that much of this mixing may occur in hot spots near areas of rough topography (e.g., mid-ocean ridges and island arcs). Barotropic tidal currents provide a very plausible source of energy to maintain these mixing processes. Topex/Poseidon satellite altimetry data have made precise mapping of open ocean tidal elevations possible for the first time. We can thus obtain empirical, spatially localized, estimates of barotropic tidal dissipation. These provide an upper bound on the amount of tidal energy that is dissipated in the deep ocean, and hence is available for deep mixing. We will present and compare maps of open ocean tidal energy flux divergence, and estimates of tidal energy flux into shallow seas, derived from T/P altimetry data using both formal data assimilation methods and empirical approaches. With the data assimilation methods we can place formal error bars on the fluxes. Our results show that 20-25% of tidal energy dissipation occurs outside of the shallow seas, the traditional sink for tidal energy. This suggests that up to 1 TW of energy may be available from the tides (lunar and solar) for mixing the deep ocean. The dissipation indeed appears to be concentrated over areas of rough topography.

Ray, Richard D.↗
NASA NTRS1999

Tidal Energy Available for Deep Ocean Mixing: Bounds From Altimetry Data

Maintenance of the large-scale thermohaline circulation has long presented a problem to oceanographers. Observed mixing rates in the pelagic ocean are an order of magnitude too small to balance the rate at which dense bottom water is created at high latitudes. Recent observational and theoretical work suggests that much of this mixing may occur in hot spots near areas of rough topography (e.g., mid-ocean ridges and island arcs). Barotropic tidal currents provide a very plausible source of energy to maintain these mixing processes. Topex/Poseidon satellite altimetry data have made precise mapping of open ocean tidal elevations possible for the first time. We can thus obtain empirical, spatially localized, estimates of barotropic tidal dissipation. These provide an upper bound on the amount of tidal energy that is dissipated in the deep ocean, and hence is available for deep mixing. We will present and compare maps of open ocean tidal energy flux divergence, and estimates of tidal energy flux into shallow seas, derived from T/P altimetry data using both formal data assimilation methods and empirical approaches. With the data assimilation methods we can place formal error bars on the fluxes. Our results show that 20-25% of tidal energy dissipation occurs outside of the shallow seas, the traditional sink for tidal energy. This suggests that up to 1 TW of energy may be available from the tides (lunar and solar) for mixing the deep ocean. The dissipation indeed appears to be concentrated over areas of rough topography.

Egbert, Gary D.↗
NASA NTRS1994

A Semantic Theory of Abstractions: A Preliminary Report

In this paper we present a semantic theory of abstractions based on viewing abstractions as interpretations between theories. This theory captures important aspects of abstractions not captured in the theory of abstractions presented by Giunchiglia and Walsh. Instead of viewing abstractions as syntactic mappings, we view abstractions as a two step process: the intended domain model is first abstracted and then a set of (abstract) formulas is constructed to capture the abstracted domain model. Viewing and justifying abstractions as model level transformations is both natural and insightful. We provide a precise characterization of the abstract theory that exactly implements the intended abstraction, and show that this theory, while being axiomatizable, is not always finitely axiomatizable. A simple corollary of the latter result disproves a conjecture made by Tenenberg that if a theory is finitely axiomatizable, then predicate abstraction of that theory leads to a finitely axiomatizable theory.

Nayak, P. Pandurang↗