Search NASA⌕ Search

SEARCH · Search NASA

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Polaritonic Bright and Dark States Collectively Affect the Reactivity of a Hydrolysis Reaction

Vibrational strong coupling (VSC) has emerged as a means for modifying chemical reactivity. Despite the intriguing discoveries and progresses in the field, the precise mechanisms that govern polaritonic chemistry still deserve further interrogation. Herein, we use the hydrolysis of ammonia borane in D 2 O as an exemplary reaction and systematically investigate the influence of VSC on its reactivity. Experimental evidence of the coexistence of a resonant effect and reaction acceleration is observed in this system. In particular, we find that when the O-D stretching mode of D 2 O is strongly coupled to a cavity mode, reaction acceleration is observed. The reaction rate acceleration factor, mu, is consistently observed to be dependent on the coupling conditions between the vibrational and cavity modes, and reaches a minimum at zero mode detuning, suggesting that a resonant effect is likely in play. In addition, we find that mu decreases with an increasing Rabi splitting. Based on these experimental findings, we propose that the overall influence of VSC on this reaction is likely determined collectively by the polaritonic bright and dark states. In conclusion, these findings could help shed new light on the intricate effects of VSC on ground-state reaction landscapes.

Rabi splitting↗

High Resolution Infrared Spectroscopy of Highly Reactive Chemical Intermediates: Berkeley Inspiration and a C.B. Moore Retrospective

One of the long-standing paradoxes in chemistry is that the molecular species of greatest interest are often highly reactive chemical intermediates and thus present only at vanishingly small concentrations under typical steady state conditions. Here, this has proven both a key frustration and powerful motivation for physical chemists in probing such species, particularly for high resolution laser spectroscopic methods in the infrared. Over the past 4-5 decades, this fundamental sensitivity challenge has stimulated the development of many novel techniques for efficient generation, cooling, and infrared probing of such transient chemical intermediates, achieving increasingly sophisticated levels of spectroscopic detail, chemical insight, and a testbed for comparison with first principles ab initio quantum calculations. Two of the pioneering contributors to this scientific arena have been George Pimentel and C. Bradley Moore, both responsible for nourishing DJN’s own enduring fascination with spectroscopic IR study of elusive chemical intermediates. This chapter is not intended to provide a comprehensive review of this large and enormously successful field, but it rather more simply attempts to capture a few selective “Moore-centric” snapshots of the Nesbitt group scientific evolution, specifically in i) advances by Pimentel for the original development of rapid scan flash kinetic spectroscopy based on spectrometers with rapidly rotating IR gratings, ii) the modernization/extension of these methods in the Moore group toward the first high resolution IR laser spectroscopy of singlet/triplet methylene 1,3 CH 2 diradical, and finally to iii) the development of slit supersonic discharge expansion methods at JILA for sub-Doppler infrared laser study of multiple radicals, jet cooled molecular ions, and highly reactive chemical intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaporite Caprock Integrity. An experimental study of reactive mineralogy and pore-scale heterogeneity during brine-CO 2 exposure

Characterization and geochemical data are presented from a core-flooding experiment on a sample from the Three Fingers evaporite unit forming the lower extent of caprock at the Weyburn-Midale reservoir, Canada. This low-permeability sample was characterized in detail using X-ray computed microtomography before and after exposure to CO 2 -acidified brine, allowing mineral phase and voidspace distributions to be quantified in three dimensions. Solution chemistry indicated that CO 2 -acidified brine preferentially dissolved dolomite until saturation was attained, while anhydrite remained unreactive. Dolomite dissolution contributed to increases in bulk permeability through the formation of a localized channel, guided by microfractures as well as porosity and reactive phase distributions aligned with depositional bedding. An indirect effect of carbonate mineral reactivity with CO 2 -acidified solution is voidspace generation through physical transport of anhydrite freed from the rock matrix following dissolution of dolomite. The development of high permeability fast pathways in this experiment highlights the role of carbonate content and potential fracture orientations in evaporite caprock formations considered for both geologic carbon sequestration and CO 2 -enhanced oil recovery operations.

02 PETROLEUM↗

Secondary Organic Aerosol Formation from 2-Methyl-3-Buten-2-ol Photooxidation: Evidence of Acid-Catalyzed Reactive Uptake of Epoxides

Secondary organic aerosol (SOA) formation from 2-methyl-3-buten-2-ol (MBO) photooxidation has recently been observed in both field and laboratory studies. Similar to isoprene, MBO-derived SOA increases with elevated aerosol acidity in the absence of nitric oxide; therefore, an epoxide intermediate, (3,3-dimethyloxiran-2-yl)methanol (MBO epoxide) was synthesized and tentatively proposed here to explain this enhancement. In the present study, the potential of the synthetic MBO epoxide to form SOA via reactive uptake was systematically examined. SOA was observed only in the presence of acidic aerosols. Major SOA constituents, 2,3-dihydroxyisopentanol (DHIP) and MBO-derived organosulfate isomers, were chemically characterized in both laboratory-generated SOA and in ambient fine aerosols collected from the BEACHON-RoMBAS field campaign during summer 2011, where MBO emissions are substantial. Our results support epoxides as potential products of MBO photooxidation leading to formation of atmospheric SOA and suggest that reactive uptake of epoxides may generally explain acid enhancement of SOA observed from other biogenic hydrocarbons.

Zhang, Haofei↗

Nature of Reactive Hydrogen for Ammonia Synthesis over a Ru/C12A7 Electride Catalyst

Recently, there have been renewed interests in exploring new catalysts for ammonia synthesis under mild conditions. Electride-based catalysts are among the emerging ones. Ruthenium particles supported on an electride composed of a mixture of calcium and aluminum oxides (C12A7) have attracted great attention for ammonia synthesis due to their facile ability in activating N2 under ambient pressure. However, the exact nature of the reactive hydrogen species and the role of electride support still remain elusive for this catalytic system. Here, we report for the first time that the surface-adsorbed hydrogen, rather than the hydride encaged in the C12A7 electride, plays a major role in ammonia synthesis over the Ru/C12A7 electride catalyst with the aid of in situ neutron scattering techniques. Combining in situ neutron diffraction, inelastic neutron spectroscopy, density functional theory (DFT) calculation, and temperature-programmed reactions, the results provide direct evidence for not only the presence of encaged hydrides during ammonia synthesis but also the strong thermal and chemical stability of the hydride species in the Ru/C12A7 electride. Steady state isotopic transient kinetic analysis (SSITKA) of ammonia synthesis showed that the coverage of reactive intermediates increased significantly when the Ru particles were promoted by the electride form (coverage up to 84%) of the C12A7 support rather than the oxide form (coverage up to 15%). Such a drastic change in the intermediate coverage on the Ru surface is attributed to the positive role of electride support where the H2 poisoning effect is absent during ammonia synthesis over Ru. The finding of this work has significant implications for understanding catalysis by electride-based materials for ammonia synthesis and hydrogenation reactions in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coherent Acoustic Interferometry during the Photodriven Oxygen Evolution Reaction Associates Strain Fields with the Reactive Oxygen Intermediate (Ti–OH*)

The oxygen evolution reaction (OER) from water requires the formation of metastable, reactive oxygen intermediates to enable oxygen–oxygen bond formation. Conversely, such reactive intermediates could also structurally modify the catalyst. Here, a descriptor for the overall catalytic activity, the first electron and proton transfer OER intermediate from water, (M–OH*), has been associated with significant distortions of the metal–oxygen bonds upon charge-trapping. Time-resolved spectroscopy of in situ, photodriven OER on transition metal oxide surfaces has characterized M–OH* for the charge trapping and the symmetry of the lattice distortions by optical and vibrational transitions, respectively, but had yet to detect an interfacial strain field arising from a surface coverage M–OH*. Here, we utilize picosecond, coherent acoustic interferometry to detect the uniaxial strain normal to the SrTiO 3 /aqueous interface directly caused by Ti–OH*. The spectral analysis applies a fairly general methodology for detecting a combination of the spatial extent, magnitude, and generation time of the interfacial strain through the coherent oscillations’ phase. For lightly n-doped SrTiO 3 , we identify the strain generation time (1.31 ps), which occurs simultaneously with Ti–OH* formation, and a tensile strain of 0.06% (upper limit 0.6%). In addition to fully characterizing this intermediate across visible, mid-infrared, and now GHz-THz probes on SrTiO 3 , we show that strain fields occur with the creation of some M–OH*, which modifies design strategies for tuning catalytic activity and provides insight into photo-induced degradation so prevalent for OER. To that end, the work put forth here provides a unique methodology to characterize intermediate-induced interfacial strain across OER catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterometallic Ce IV / V V Oxo Clusters with Adjustable Catalytic Reactivities

Heterometallic Ce IV /M oxo clusters are underexplored yet and can benefit from synergistic properties from combining cerium and other metal cations to produce efficient redox catalysts. Herein, we designed and synthesized a series of new Ce 12 V 6 oxo clusters with different capping ligands: Ce 12 V 6 -SO 4 , Ce 12 V 6 -OTs (OTs: toluenesulfonic acid), and Ce 12 V 6 -NBSA (NBSA: nitrobenzenesulfonic acid). Single crystal X-ray diffraction (SCXRD) for all three structures reveals a Ce 12 V 6 cubane core formulated [Ce 12 (VO) 6 O 24 ] 18+ with cerium on the edges of the cube, vanadyl capping the faces, and sulfate on the corners. While infrared spectroscopy (IR), ultraviolet–visible spectroscopy (UV–vis), electrospray ionization mass spectrometry (ESI-MS), and proton nuclear magnetic resonance ( 1 H NMR) proved the successful coordination of the organic ligands to the Ce 12 V 6 core, liquid phase 51 V NMR and small-angle X-ray scattering (SAXS) confirmed the integrity of the clusters in the organic solutions. Furthermore, functionalization of the Ce 12 V 6 core with organic ligands both provides increased solubility in term of homogeneous application and introduces porosity to the assemblies of Ce 12 V 6 -OTs and Ce 12 V 6 -NBSA in term of heterogeneous application, thus allowing more catalytic sites to be accessible and improving reactivity as compared to the nonporous and less soluble Ce 12 V 6 -SO 4 . Meanwhile, the coordinated ligands also influenced the electronic environment of the catalytic sites, in turn affecting the reactivity of the cluster, which we probed by the selective oxidation of 2-chloroethyl ethyl sulfide (CEES). Furthermore, this work provides a strategy to make full use of the catalytic sites within a class of inorganic sulfate capped clusters via organic ligand introduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoenzymatic Catalysis in a New Light: Gluconobacter “Ene”-Reductase Conjugates Possessing High-Energy Reactivity with Tunable Low-Energy Excitation

Non-natural light-driven enzymatic reactivity was recently developed to perform the highly stereoselective reactions required for pharmaceutical synthesis. However, photoenzymes require high-intensity light to function because of the poor absorption properties of their photoactive intermediates. Inspired by the modular architecture of photosynthesis, we designed a conjugate composed of a covalently linked photoenzyme and a light antenna to separate light capture from catalysis. Spectroscopic characterization of the conjugate showed the presence of efficient energy transfer from the light-harvesting components to the photoenzyme. In the presence of energy transfer, a ~4-fold increase in product yield was observed for intramolecular hydroalkylation of alkenes, and reactivity was enabled for intermolecular hydroalkylation of alkenes. As a result, these improvements establish the power of incorporating nature’s design into non-natural photoenzymatic catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidation of the Roles of Water on the Reactivity of Surface Intermediates in Carboxylic Acid Ketonization on TiO 2

The effects of water on the carboxylic acid ketonization reaction over solid Lewis-acid catalysts were examined by nuclear magnetic resonance (NMR) spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), temperature-programmed desorption (TPD), and kinetic measurements. Acetic acid and propanoic acid were used as model compounds, and P25 TiO 2 was used as a model catalyst to represent the anatase TiO 2 since the rutile phase only contributes to <2.5% of the overall ketonization activity of P25 TiO 2 . The kinetic measurement showed that introducing H 2 O vapor in gaseous feed decreases the ketonization reaction rate by increasing the intrinsic activation barrier of gas-phase acetic acid on anatase TiO 2 . Quantitative TPD of acetic acid indicated that H 2 O does not compete with acetic acid for Lewis sites. Instead, as indicated by combined approaches of NMR and DRIFTS, H 2 O associates with the adsorbed acetate or acetic acid intermediates on the catalyst surface and alters their reactivities for the ketonization reaction. There are multiple species present on the anatase TiO 2 surface upon carboxylic acid adsorption, including molecular carboxylic acid, monodentate carboxylate, and chelating/bridging bidentate carboxylates. The presence of H 2 O vapor increases the coverage of the less reactive bridging bidentate carboxylate associated with adsorbed H 2 O, leading to lower ketonization activity on hydrated anatase TiO 2 . In conclusion, surface hydroxyl groups, which are consumed by interaction with carboxylic acid upon the formation of surface acetate species, do not impact the ketonization reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Manganese Compound I Model with a High Reactivity in the Oxidation of Organic Substrates and Water

In this work, a high-valent manganese(IV)-hydroxo porphyrin π-cation radical complex, [Mn(IV)(OH)(Porp +• )(X)] + , was synthesized and characterized spectroscopically. The Mn porphyrin intermediate was highly reactive in alkane hydroxylation and oxygen atom transfer reactions. More importantly, the Mn porphyrin intermediate reacted with water at a fast rate, resulting in the dioxygen evolution. To the best of our knowledge, we report the first manganese Cpd I model compound bearing a porphyrin π-cation radical ligand with a high reactivity in oxidation reactions, including water oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization of a Heme-HNO Model Complex Using a Bulky Bis-Picket Fence Porphyrin and Reactivity Studies with NO

Nitroxyl, HNO/NO – , the one-electron reduced form of NO, is suggested to take part in distinct signaling pathways in mammals and is also a key intermediate in various heme-catalyzed NO x interconversions in the nitrogen cycle. Cytochrome P450nor (Cyt P450nor) is a heme-containing enzyme that performs NO reduction to N 2 O in fungal denitrification. The reactive intermediate in this enzyme, termed “Intermediate I”, is proposed to be an Fe-NHO/Fe-NHOH type species, but it is difficult to study its electronic structure and exact protonation state due to its instability. Here, we utilize a bulky bis-picket fence porphyrin to obtain the first stable heme-HNO model complex, [Fe(3,5-Me-BAFP)(MI)(NHO)], as a model for Intermediate I, and more generally HNO adducts of heme proteins. Due to the steric hindrance of the bis-picket fence porphyrin, [Fe(3,5-Me-BAFP)(MI)(NHO)] is stable (τ 1/2 = 56 min at -30 °C), can be isolated as a solid, and is available for thorough spectroscopic characterization. In particular, we were able to solve a conundrum in the literature and provide the first full vibrational characterization of a heme-HNO complex using IR and nuclear resonance vibrational spectroscopy (NRVS). Reactivity studies of [Fe(3,5-Me-BAFP)(MI)(NHO)] with NO gas show a 91 ± 10% yield for N 2 O formation, demonstrating that heme-HNO complexes are catalytically competent intermediates for NO reduction to N 2 O in Cyt P450nor. In conclusion, the implications of these results for the mechanism of Cyt P450nor are further discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Tuning of Reactivity of Zeolite Protons in HZSM-5

In acidic HZSM-5 zeolite, the reactivity of a methanol molecule interacting with the zeolite proton is amenable to modification via coadsorbing a stochiometric amount of an electron density donor E to form the [(E)(CH 3 OH)(HZ)] complex. The rate of the methanol in this complex undergoing dehydration to dimethyl ether was determined for a series of E with proton affinity (PA) ranging from 659 kJ mol –1 for C 6 F 6 to 825 kJ mol –1 for C 4 H 8 O and was found to follow the expression: Ln(Rate) – Ln(Rate N 2 ) = β(PA – PA N 2 ) γ , where E = N 2 is the reference and β and γ are constants. This trend is probably due to the increased stability of the solvated proton in the [(E)(CH 3 OH)(HZ)] complex with increasing PA. Importantly, this is also observed in steady-state flow reactions when stoichiometric quantities of E are preadsorbed on the zeolite. As demonstrated with E being D 2 O, the effect on methanol reactivity diminishes when E is present in excess of the [(E)(CH 3 OH)(HZ)] complex. It is proposed that the methanol dehydration reaction involves [(E)(CH 3 OH)(CH 3 OH)(HZ)] as the transition state, which is supported by the isotopologue distribution of the initial dimethyl ether formed when a flow of CH 3 OH was passed over ZSM-5 containing one CD 3 OH per zeolite proton. Furthermore, the implication of this on the mechanism of catalytic methanol dehydration on HZSM-5 is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Catalytic Reactivity via Wetting Control through Oxygen Vacancies: Ru Clusters on Anatase TiO 2 and CeO 2 Supports

The shape of supported metal particles regulates their catalytic reactivity and is determined by the degree of wetting between the metal particle and the support surface. Flattened particles that wet support surfaces were reported in various catalytic systems, particularly in the subnanometer size regime. Such consequential metal–support wetting phenomena are poorly understood, and methods to study them on powder catalysts under realistic conditions are lacking. Here, we investigate the size-dependent wetting behaviors of Ru particles on two reducible-oxide supports, anatase TiO 2 (TiO 2 -A) and CeO 2 , under reducing catalytic conditions. X-ray absorption spectroscopy (XAS), low-energy ion scattering (LEIS), and density functional theory (DFT) are combined to determine the shape of Ru particles. Ru particles remain three-dimensional without wetting the TiO 2 -A support within the coverage range studied (0.06–0.98 Ru nm –2 ). In contrast, at low coverages (<0.25 Ru nm –2 ), Ru wets the CeO 2 support to form flat, disordered structures. The higher wettability of CeO 2 than TiO 2 -A is attributed to oxygen vacancies in the near-surface region. The shape difference between small Ru particles or clusters on the two supports leads to drastically contrasting catalytic reactivities in polyolefin hydrogenolysis, despite similar diameters. As a result, this work highlights the implications of metal–support wetting, or cluster shape, on catalytic behaviors of small metal clusters, while establishing the foundation for future systematic studies of such a phenomenon in realistic systems, by delivering a multitechnique methodology and revealing governing fundamental principles.

42 ENGINEERING↗

Probing the External Surface Chemistry of Imine-Based Covalent Organic Frameworks Using Reactive Organic Dyes

The external surfaces of covalent organic frameworks (COFs) are presumably composed of free terminal functional groups from their constituent monomers. These terminal groups have been utilized to immobilize molecules onto COF surfaces for a variety of studies and potential applications. Despite the utility of these latent functional groups for COF functionalization and composite formation, the surface chemistry of the COFs has not been quantitatively investigated and is not well understood. In this work, fluorescent organic dyes bearing reactive amine and aldehyde functional groups are used to probe the surface chemistry of representative two-dimensional (2D) imine-based COFs. Furthermore, systematic dye binding and displacement experiments provide new insights into the characteristics of COF surfaces and the reactivity of different molecules with the surface groups on the COF crystallites.

COFs↗

Formation, characterization and reactivity of adsorbed oxygen on BaO/Pt(111)

The formation of adsorbed O (Oad) species and their reactivities in CO oxidation on BaO/Pt(111) (at two BaO coverages) were studied with temperature programmed desorption (TPD), infrared reflection absorption (IRA) and X-ray photoelectron (XP) spectroscopies. In neither of these two systems was the Pt(111) surface completely covered with BaO. On the system with lower BaO coverage (~45 % of the Pt(111) surface is covered by BaO), two different Oad species form following the adsorption of O2 at 300 K: O adsorbed on BaO-free Pt(111) sites (OPt) and at the Pt-BaO interface (Oint). On the system with higher BaO coverage (~60 % of the Pt(111) surface is covered by BaO), two types of Oint are seen at the Pt-BaO interface. The desorption of OPt from the BaO-free portion of the Pt(111) surface gives an O2 desorption peak with a maximum desorption rate at ~690 K. Migration of Oint to the Pt(111) sites and their recombinative desorption give two explosive desorption features at ~760 and ~790 K in the TPD spectrum. The reactivities of these Oad species with CO to form CO2 follow their sequence of desorption; i.e., the OPt associated with the BaO-free Pt(111) surface, which desorbs at 690 K, reacts first with CO, followed by the Oint species at the Pt-BaO interface (first the one that desorbs at ~760 K and finally the one that is bound the most strongly to the interface, and desorbs at ~790 K). This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure-specific reactivity of alumina supported monomeric vanadium oxide species.

Oxidative dehydrogenation (ODH) catalysts based on vanadium oxide are active for the production of alkenes, chemicals of great commercial importance. The current industrial practice for alkene production is based on energy-intensive, dehydrogenation reactions. UV resonance and visible Raman measurements, combined with density functional studies, are used to study for the first time the structure-reactivity relationships for alumina-supported monomeric vanadium oxide species. The relationship between the structure of three vanadium oxide monomeric surface species on a {theta}-alumina surface, and their reducibility by H{sub 2} was determined by following changes in the vanadia's UV Raman and resonance Raman spectra after reaction with H{sub 2} at temperatures from 450 to 650 C. The H{sub 2} reducibility sequence for the three monomeric species is bidentate > 'molecular' > tridentate. The reaction pathways for H{sub 2} reduction on the three vanadium oxide monomeric structures on a {theta}-alumina surface were investigated using density functional theory. Reduction by H{sub 2} begins with reaction at the V=O bond in all three species. However, the activation energy, Gibbs free energy change under reaction conditions, and the final V oxidation state are species-dependent. The calculated ordering of reactivity is consistent with the observed experimental ordering and provides an explanation for the ordering. The results suggest that synthesis strategies can be devised to obtain vanadium oxide structures with greatly enhanced activity for ODH resulting in more efficient catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local Structure, Electronic Behavior, and Electrocatalytic Reactivity of CO-Reduced Platinum-Iron Oxide Nanoparticles

A series of platinum–iron oxide nanoparticles was synthesized using a “clean” CO-reduction method that employed different ratios of Pt-Fe precursor salts in oleylamine at elevated temperatures. High-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDS) studies revealed that nearly monodisperse (i.e., with relative standard deviations of less than 15%) nanoparticles with mean diameters of 3.5–4.4 nm and varied elemental compositions (Pt 54 Fe 46 Pt 70 Fe 30 , and Pt 87 Fe 13 ) were obtained. X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) measurements at the Pt L 3 - and Fe K-edges revealed that these nanoparticles all consisted of a Pt core with amorphous iron oxide on the surface. Furthermore, it was observed that the local structure (e.g., Pt–Pt bond distance and coordination number) and electronic behavior of the Pt–FeO nanoparticles (e.g., Pt d electron density and Fe valence state) are dependent on the Pt-Fe precursor ratios used in their synthesis. Quantum mechanical ab initio calculations were employed to interpret the results from X-ray spectroscopy and help elucidate the relationships between local structure and electronic properties in the nanoparticle samples. Finally, the surface reactivity of these nanoparticles in the oxygen reduction reaction (ORR) was explored, demonstrating higher electrocatalytic activity for all three platinum–iron oxide samples in comparison with a commercial Pt catalyst. The surface reactivity was also found to be sensitive to the Pt-Fe ratios of the nanoparticles and could be correlated with their local structure and electronic behavior.

Duchesne, Paul N.↗

Reactivity of Fe-0 Atoms, Clusters, and Nanoparticles with CC14 Multilayers on FeO(111)

The interaction of Fe0 atoms and clusters with CCl4 multilayers was investigated using a novel "atom dropping" method at 30 K over a FeO(111) thin film. Temperature programmed desorption experiments over a range of Fe0 and CCl4 coverages demonstrate a rich surface chemistry with several reaction products (C2Cl4, C2Cl6, OCCl2, CO, FeCl2, FeCl3) observed. X-ray photoelectron spectroscopy data show that the initial reactive interaction occurs spontaneously at 30 K, with the experimentally observed reaction products formed at higher temperature, in agreement with the results of theoretical calculations. The formation of OCCl2 and CO is concluded to occur through abstraction of O atoms from the generally inert FeO(111) substrate. The buffer layer assisted growth technique is used to show that the reactivity, and interestingly the reaction products, is determined by the size of Fe0 nanoparticles which interact with CCl4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗