Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Comprehending the occupying preference of manganese substitution in crystalline cement clinker phases: A theoretical study

Highlights: • The element distributions of manganese in clinker are successfully predicted by atomic simulations. • Occupying preference of Mn in clinker follows the ''electronic properties matching'' principle. - Abstract: Understanding the dopant behavior in cement clinker has been an important issue due to the increasing use of alternative fuels and secondary raw materials for cement manufacturing following the rising demand for reduction of CO{sub 2} emissions and energy consumption. In this work, state-of-the-art ab initio calculations have been employed to systematically investigate manganese (Mn) doping mechanism in four dominant clinker phases. Corresponding experimental studies are incorporated to verify simulated results. A conspicuous preference of Mn for occupying the Fe site in ferrite is found based on formation energy analyses, which is in accord with our experiments and vast literatures. More in-depth analyses indicate the Mn doping mechanism follows the ''electronic structure matching'' principle, which influences the stability of doped structures by inducing localized coordination distortions. The work provides a fundamental perspective to investigate doped clinker, which facilitates the searching for other doping species, thereby designing steerable doping-enhanced cement.

36 MATERIALS SCIENCE↗

Molecular-level solvation and selectivity behavior of Na + , K + , and Li + within glycerol-derived solvents

Ether-based acyclic solvents have a tendency to confine positively charged atoms, forming structures called podands. Due to the stability of these structures, podands have been identified as promising candidates for several different electrochemical applications. In this work, we use molecular dynamics simulations to investigate the solvation and selectivity of Na + , K + , and Li + by different glycerol-derived solvents. The structural properties suggest that the solvent-cation association is stable over a very wide temperature range. Further, a strong correlation is observed between the more electronegative oxygen sites and preferential interaction with the cations, which suggests that the electrostatic oxygen-ion interactions dominate the coordination between these species. Significantly more intense interactions are observed between the solvents and Li + , versus Na + or K + . These molecular-level thermodynamic insights provide fundamental support for further exploring the performance of glycerol-derived podand complexes in Li + capture applications and/or electrolyte formulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hierarchical Defect Engineering for LiCoO 2 through Low-Solubility Trace Element Doping

Real-world industry-relevant battery composite electrodes are hierarchically structured. Their structural and chemical complexity is featured by ubiquitous multi-scale porosity and cracks, solid-solid and solid-liquid interfaces, compositional and redox heterogeneity, as well as lattice disordering and deformation. In particular for the active cathode particles, which are the fundamental building blocks for the energy reservoir, it is a consensus that these structural and chemical defects could have a profound impact on the battery performance. An in-depth understanding of the underlying mechanisms could critically inform the cathode material engineering, which would have a tremendous potential but remains a daunting challenge at present. In this work, we tackle this question by studying LiCoO 2 (LCO) with trace doping of Ti, which exhibits a low solubility in the LCO layered lattice. Additionally, we observed the spontaneous and heterogeneous segregation of the dopant (Ti) across a wide range of length scales. In addition to the modification of the particle surface and the buried grain boundaries within the particle, we reveal that the Ti doping has induced a significant amount of lattice distortions, which, in turn, promotes the robustness of the LCO lattice at high state of charge (above 4.5V). Our result formulates a multi-scale defect engineering strategy that could be applicable to the synthesis of a broad range of energy materials for applications in batteries and beyond.

36 MATERIALS SCIENCE↗

Radiation effects on stress evolution and dimensional stability of large fusion energy structures

Here we assess the effects of neutron irradiation on the deformation and stress evolution of large-scale fusion energy structures. This is accomplished through non-linear finite element structural analysis of the coupled thermal and mechanical fields at the Beginning-Of-Life (BOL), at 45 dpa, and at 90 dpa. Radiation effects include volumetric swelling and the influence of radiation on the mechanical properties. The system studied here is a large section of a full inboard module of an integrated structure comprising the First Wall and Blanket (FW/B) of a Dual Cooled Lithium-Lead (DCLL) energy conversion unit in the Fusion Nuclear Science Facility (FNSF). The structural material is the ferritic/martensitic steel F82H. We analyze several radiation effects phenomena that can lead to significant impact on the mechanical design and lifetime of the structure. These include volumetric swelling effects on the assembly and disassembly of modules and the impact of spatial gradients in neutron damage and helium generation on deformation, stress evolution, and plastic strain accumulation. We show that the stress state is strongly influenced by the accumulation of swelling strains, radiation hardening and softening, and by spatial gradients in displacement damage and helium gas generation. Several key regions in the FW/B structure are identified where severe plastic strains accumulate and may be potential sites for failure, especially during cyclic reactor operations. We finally show that minimum gaps between Inboard (IB) blanket sectors must be present during assembly so as to avoid excessive stress and strain in FW/B modules critical regions and raising chances of failure. A range of structural displacements are shown, from as low as 4 mm at BOL for free side walls to as high as 46 mm at 90 dpa for fully constrained side walls.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In situ neutron diffraction study of fatigue behavior of CrFeCoNiMo 0.2 high entropy alloy

In situ neutron diffraction measurement was applied to study the low-cycle fatigue behavior of CrFeCoNiMo 0.2 high entropy alloy. A two-step stress-controlled fatigue test with a stress range of 100–460 and 20–500 MPa was employed. The as-cast sample was cycled 129,000 and 61,000 times, respectively, before fracture. The evolution of the lattice strain and peak intensity demonstrates that the main deformation mechanism is dislocation slip, while no evidence of stacking fault was found. A three-stage ratcheting was clearly observed. Under the stress-controlled mode, the experimentally determined dislocation density increases linearly with the ratcheting strain. Here, the increase of the dislocation density results in a decay of the ratcheting strain rate, which stabilizes the structure and is beneficial for fatigue resistance.

36 MATERIALS SCIENCE↗

Unraveling the advances of trace doping engineering for potassium ion battery anodes via tomography

Doping have been considered as a prominent strategy to stabilize crystal structure of battery materials during the insertion and removal of alkali ions. The instructive knowledge and experience acquired from doping strategies predominate in cathode materials, but doping principle in anodes remains unclear. Here, we demonstrate that trace element doping enables stable conversion-reaction and ensures structural integrity for potassium ion battery (PIB) anodes. With a synergistic combination of X-ray tomography, structural probes, and charge reconfiguration, we encode the physical origins and structural evolution of electro-chemo-mechanical degradation in PIB anodes. By the multiple ion transport pathways created by the orderly hierarchical pores from “surface to bulk” and the homogeneous charge distribution governed in doped nanodomains, the anisotropic expansion can be significantly relieved with trace isoelectronic element doping into the host lattice, maintaining particle mechanical integrity. Our work presents a close relationship between doping chemistry and mechanical reliability, projecting a new pathway to reengineering electrode materials for next-generation energy storage.

25 ENERGY STORAGE↗

Impact of fission product inclusion on phase development in U 3 Si 2 fuel

Due to its high thermal conductivity and uranium density, U 3 S i2 has been considered as a candidate for use as an accident tolerant fuel (ATF). In order to fully assess its suitability and performance as a fuel, the impact of fission products (FPs) on the stability and performance of U 3 Si 2 must be investigated. The interactions of FPs and U 3 Si 2 have had relatively little study until now and require experimental and computational examination. U 3 Si 2 was doped with individual FPs to explore U-Si-FP interactions and phase equilibria that may impact the performance of the ATF during irradiation. Elemental Ce, Mo, Y, or Zr were used to individually dope U 3 Si 2 at a concentration of 5 wt% FP. A diffusion couple of a 1:1 Mo:Zr alloy and U 3 Si 2 was heated to 1200 °C in order to consider the impacts of multiple FPs on the stability and structure of the fuel. Samples were characterized for FP solubility and secondary phase formation using electron microscopy, energy dispersive spectroscopy, and x-ray diffraction. First principles density functional theory calculations complemented the experimental effort to understand FP behavior. Experimental and computational findings were used in the development of a thermodynamic database containing 8 major FPs and their associated silicide phases. Finally, fuel compositions generated from depletion calculations were used to thermodynamically model the equilibrium phases of the fuel undergoing burnup.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High radiation tolerance of an ultrastrong nanostructured NiCoCr alloy with stable dispersed nanooxides and fine grain structure

The present paper reports the irradiation behavior of nanostructured NiCoCr medium entropy alloy enhanced by Y-Hf-O nanooxides and fine grains produced by powder metallurgy. Ion beam irradiation to a peak dose of 130 dpa at 580°C produced neither detectable void swelling nor irradiation-induced hardening, in contrast to significant void swelling and property degradation of single phase NiCoCr concentrated solid-solution alloy under the similar irradiation condition. The dispersed nanooxides and high density of grain boundaries act as defect sinks that effectively annihilate irradiation-induced interstitials and vacancies. Furthermore, high-density nanooxides maintain their crystalline structures and stabilize the grain boundaries during irradiation.

36 MATERIALS SCIENCE↗

Amorphous electrocatalysts for oxygen and hydrogen evolution reactions: Advances in hydrogen production

The electrochemical splitting of water into oxygen and hydrogen is fundamental for renewable energy storage and conversion. The development of cost-effective and highly efficient electrocatalysts remains essential for industrial-scale implementation of this technology. Recent advances have highlighted the superior activity, stability and structural adaptability of amorphous electrocatalysts compared to their crystalline counterparts. This review critically examines synthesis strategies, characterisation techniques, and the electrochemical performance of amorphous materials for both oxygen evolution (OER) and hydrogen evolution (HER) reactions. Key factors influencing catalytic efficiency, including electronic structure and surface chemistry, are discussed in detail and contextualised with established literature. The review also highlights the critical role of enthalpic contributions in governing reaction energetics and catalyst performance, which aids in understanding and optimising electrocatalytic efficiency. Notably, ongoing research continues to reveal that amorphous catalysts consistently deliver improved performance in water-splitting applications, highlighting their growing relevance in electrocatalysis. The rationale for employing amorphous catalysts in water splitting is articulated, emphasising their unique advantages. By integrating recent findings and outlining future research directions, this review underscores the pivotal role of amorphous materials in advancing sustainable hydrogen production and identifies promising avenues for catalyst innovation.

Amorphous catalysts↗

When do hydrocarbons dewet metal surfaces? The case of coronene on Cu(111)

Here, we have used scanning tunneling microscopy and density functional theory calculations to study molecular layers of coronene on Cu(111). The structure and stability of these layers is determined by the balance between coronene-substrate and coronene-coronene interactions. Here, we characterize this balance by measuring the maximum coverage before coronene dewets the substrate to form three-dimensional islands. We find that coronene molecules lie parallel to the substrate at the maximum coverage, in contrast to previous observations of tilted coronene on metal surfaces. We attribute this previously reported tilt to a metastability caused by an activation barrier to nucleate three-dimensional islands.

36 MATERIALS SCIENCE↗

Evolution of Surface Copper(II) Environments in Cu 2–x Se Nanoparticles

Cu 2–x Se nanoparticles are part of a promising class of alternative plasmonic materials where the location, stability, and structural impact of charge carrier generation are crucial to their optoelectronic performance. Electron paramagnetic resonance spectroscopy is used to identify the location and dynamics of Cu 2+ environments that form upon air-induced oxidation of Cu 2–x Se nanoparticles. The results indicate the formation of two distinct Cu 2+ environments at or near the surface of the nanoparticle. The first environment can be assigned to Cu 2+ bound to oleylamine capping ligands, and the second can be assigned to Cu 2+ located in CuO domains. In addition, these experiments indicate that the observed Cu 2+ environments are consistent with vacancy formation on the Cu sublattice, which are mobile (i.e., vacancy hopping) at temperatures down to 180 K. Taken together, our results elucidate time scales of air-mediated Cu oxidation in Cu 2–x Se nanoparticles, the chemical environments of the resulting Cu 2+ species, and the impact of this oxidation on the overall particle crystallographic structure and optoelectronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation

Layered lithium transition metal oxides derived from LiMO 2 (M = Co, Ni, Mn, etc.) have been widely adopted as the cathodes of Li-ion batteries for portable electronics, electric vehicles, and energy storage. Oxygen loss in the layered oxides is one of the major factors leading to cycling-induced structural degradation and its associated fade in electrochemical performance. Herein, we review recent progress in understanding the phenomena of oxygen loss and the resulting structural degradation in layered oxide cathodes. We first present the major driving forces leading to the oxygen loss and then describe the associated structural degradation resulting from the oxygen loss. Here, we follow this analysis with a discussion of the kinetic pathways that enable oxygen loss, and then we address the resulting electrochemical fade. Finally, we review the possible approaches toward mitigating oxygen loss and the associated electrochemical fade as well as detail novel analytical methods for probing the oxygen loss.

36 MATERIALS SCIENCE↗

Molecular-Scale Understanding of Sulfate Exchange from Schwertmannite by Chromate Versus Arsenate

Schwertmannite effectively sorbs chromate (Cr(VI)), yet the sorption mechanisms remain elusive. We determined the Cr(VI) sorption mechanisms on schwertmannite at pH 3.2 and 5 using combined macroscopic sorption experiments with molecularscale characterization and by comparing them to arsenate (As(V)) sorption. Cr(VI) adsorbs as bidentate-binuclear (BB) inner-sphere complexes through exchanging more sulfate and less >Fe–OH/OH 2 , with 0.59–0.71 sulfate released per Cr(VI) sorbed. While As(V) also forms BB complexes, it exchanges sulfate and >Fe–OH/OH 2 equally with 0.49–0.52 sulfate released per As(V) sorbed. At high As(V) loadings, As(V) precipitates as amorphous FeAsO 4 , particularly at low pH. The abovementioned differences between Cr(VI) and As(V) can be related to their different ionic radii and binding strength. Moreover, Cr(VI) and As(V) preferentially exchange sulfate innersphere complexes, increasing the proportion of sulfate outer-sphere complexes in schwertmannite. In turn, the concentration of sulfate outer-sphere complexes increases and then decreases with increasing Cr(VI) loading. Results suggest that an oxyanion, which would form inner-sphere complexes on a mineral surface, preferentially exchanges inner-spherically bound oxyanions than outerspherically bound ones on the surface, even though both are exchanged. Furthermore, this study improves our understanding of the sorption of oxyanions on schwertmannite and their capabilities to template schwertmannite formation and stabilize its structure.

54 ENVIRONMENTAL SCIENCES↗

Transformation of Highly Stable Pt Single Sites on Defect Engineered Ceria into Robust Pt Clusters for Vehicle Emission Control

Engineering surface defects on metal oxide supports could help promote the dispersion of active sites and catalytic performance of supported catalysts. Herein, a strategy of ZrO 2 doping was proposed to create rich surface defects on CeO 2 (CZO) and, with these defects, to improve Pt dispersion and enhance its affinity as single sites to the CZO support (Pt/CZO). The strongly anchored Pt single sites on CZO support were initially not efficient for catalytic oxidation of CO/C 3 H 6 . However, after a simple activation by H 2 reduction, the catalytic oxidation performance over Pt/CZO catalyst was significantly boosted and better than Pt/CeO 2 . Pt/CZO catalyst also exhibited much higher thermal stability. The structural evolution of Pt active sites by H 2 treatment was systematically investigated on aged Pt/CZO and Pt/CeO 2 catalysts. With H 2 reduction, ionic Pt single sites were transformed into active Pt clusters. Much smaller Pt clusters were created on CZO (ca. 1.2 nm) than on CeO 2 (ca. 1.8 nm) due to stronger Pt-CeO 2 interaction on aged Pt/CZO. Consequently, more exposed active Pt sites were obtained on the smaller clusters surrounded by more oxygen defects and Ce 3+ species, which directly translated to the higher catalytic oxidation performance of activated Pt/CZO catalyst in vehicle emission control applications.

36 MATERIALS SCIENCE↗

Molecular Design of Functional Polymers for Silica Scale Inhibition

Silica polymerization, which involves the condensation reaction of silicic acid, is a fundamental process with wide-ranging implications in biological systems, material synthesis, and scale formation. The formation of a silica-based scale poses significant technological challenges to energy-efficient operations in various industrial processes, including heat exchangers and water treatment membranes. Despite the common strategy of applying functional polymers for inhibiting silica polymerization, the underlying mechanisms of inhibition remain elusive. In this study, we synthesized a series of nitrogen-containing polymers as silica inhibitors and elucidated the role of their molecular structures in stabilizing silicic acids. Polymers with both charged amine and uncharged amide groups in their backbones exhibit superior inhibition performance, retaining up to 430 ppm of reactive silica intact for 8 h under neutral pH conditions. In contrast, monomers of these amine/amide-containing polymers as well as polymers containing only amine or amide functionalities present insignificant inhibition. Molecular dynamics simulations reveal strong binding between the deprotonated silicic acid and a polymer when the amine groups in the polymer are protonated. Notably, an extended chain conformation of the polymer is crucial to prevent proximity between the interacting monomeric silica species, thereby facilitating effective silica inhibition. Furthermore, the hydrophobic nature of alkyl segments in polymer chains disrupts the hydration shell around the polymer, resulting in enhanced binding with ionized silicic acid precursors compared to monomers. Finally, our findings provide novel mechanistic insights into the stabilization of silicic acids with functional polymers, highlighting the molecular design principles of effective inhibitors for silica polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilized Charge, Spin, and Orbital Ordering by the 6s 2 Lone Pair in Bi 0.5 Pb 0.5 MnO 3

Bi and Pb ions with charge degree of freedom depending on 6s 2 and 6s 0 electronic configurations were combined with the Mn ion in a perovskite oxide. Comprehensive theoretical and experimental investigations revealed the Bi 3+ 0.5 Pb 2+ 0.5 Mn 3+ 0.5 Mn 4+ 0.5 O 3 charge ordered state with CE-type spin and dz 2 orbital orderings as observed in La 0.5 Ca 0.5 MnO 3 , Nd 0.5 Sr 0.5 MnO 3 , and Bi 0.5 Sr 0.5 MnO 3 . Finally, the charge and orbital orderings were preserved above 500 K owing to the stereochemical activity of Bi 3+ and Pb 2+ ions which stabilized the structural distortion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗