Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface functionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

A cloud detection algorithm using the downwelling infrared radiance measured by an infrared pyrometer of the ground-based microwave radiometer

For better utilization of the ground-based microwave radiometer, it is important to detect the cloud presence in the measured data. Here, we introduce a simple and fast cloud detection algorithm by using the optical characteristics of the clouds in the infrared atmospheric window region. The new algorithm utilizes the brightness temperature (Tb) measured by an infrared radiometer installed on top of a microwave radiometer. The two-step algorithm consists of a spectral test followed by a temporal test. The measured Tb is first compared with a predicted clear-sky Tb obtained by an empirical formula as a function of surface air temperature and water vapor pressure. For the temporal test, the temporal variability of the measured Tb during one minute compares with a dynamic threshold value, representing the variability of clear-sky conditions. It is designated as cloud-free data only when both the spectral and temporal tests confirm cloud-free data. Overall, most of the thick and uniform clouds are successfully detected by the spectral test, while the broken and fast-varying clouds are detected by the temporal test. The algorithm is validated by comparison with the collocated ceilometer data for six months, from January to June 2013. The overall proportion of correctness is about 88.3% and the probability of detection is 90.8%, which are comparable with or better than those of previous similar approaches. Two thirds of discrepancies occur when the new algorithm detects clouds while the ceilometer does not, resulting in different values of the probability of detection with different cloud-base altitude, 93.8, 90.3, and 82.8% for low, mid, and high clouds, respectively. Finally, due to the characteristics of the spectral range, the new algorithm is found to be insensitive to the presence of inversion layers.

14 SOLAR ENERGY↗
NASA NTRS1972

Anode heat transfer for a flowing argon plasma at elevated electron temperature.

Theoretical investigation of heat transfer from a preionized gaseous plasma flowing over an anode surface at an elevated electron temperature in the presence of an electric field normal to the surface. A laminar boundary layer is considered in which only the velocity profile is locally similar and fluid properties are assumed to change uniformly in the gas flow direction. Results obtained by an approximation method show that for moderate current densities, the velocity and temperature distributions are insensitive to current. In addition, the effect of elevated electron temperature is negligible on convective heat transfer, but is significant for the overall heat transfer due to the enthalpy transport by current. Total heat flux to the anode is obtained by evaluating the Nusselt number and adding terms due to the potential drop in the sheath and the surface work function.

Bose, T. K.↗
NASA NTRS1973

The effect of surface conditions on the work function of insulators and semiconductors

Ionization energies of organic semiconductors were determined using single crystals of the material. The theory of the method is essentially that of Millikan's oil drop experiment. The technique employed in the experiment is based on the electrostatic method of balancing a charged particle in an electric field against the force of gravity for different excitation energies above the threshold value, and from an estimate of the balancing voltages, read off the ionization energy from the intercept of the energy axis in a plot wavelength corresponding to the balancing potential for the incident radiation of wavelength. In the modified technique which is adopted in the present experimental investigation, a small single crystal is suspended by a fine quartz fiber between two vertical capacitor plates to which a suitable high voltage is applied.

George, A.↗
NASA NTRS1972

Electrical contacts to ion cleaned n-type gallium arsenide.

The electrical current through silver contacts evaporated onto n-type gallium arsenide is reported as a function of surface treatment. Contacts to untreated gallium arsenide exhibit the expected high resistance. Surface cleaning by argon ion bombardment reduces the resistance by three orders of magnitude. The electrical resistance beyond 850 eV increases rapidly with ion bombardment energy. The resistance minimum at 850 eV is explained semiquantitatively in terms of a balance between cleaning and surface damage.

Walker, G. H.↗
NASA NTRS1974

Laboratory simulation of the herringbone pattern associated with lunar secondary crater chains

V-shaped ridge components of the herringbone pattern associated with lunar secondary crater chains have been simulated by simultaneous and nearly simultaneous impact of two projectiles near one another. The impact velocities and angles of the projectiles were similar to those of the fragments that produced secondary craters found at various ranges from large lunar craters. Variables found to affect the included angles of the V-shaped ridges are: relative time of impact of the projectiles, impact angle, relative projectile mass, and azimuth angle of the crater chain relative to the projection of the flight line onto the target surface. The functional relationships between the forms of the ridges and many of these variables are similar to those observed for lunar V-shaped ridges. Comparison of the magnitudes of the ridge angles of both laboratory crater pairs and secondary crater chains of the crater Copernicus implies that material was ejected from Copernicus at angles in excess of 60 deg, measured from the normal, to form many of Copernicus' satellite craters.

Oberbeck, V. R.↗
NASA NTRS1974

Change of blaze wavelength as a function of position on the surface of a concave grating

Conventional ruling of a concave diffraction grating with blaze angle constant relative to the optical axis produces a grating whose blaze wavelength changes continuously with displacement across the face of the ruled area. A simple explanation of the effect is given in terms of geometrical optics, and quantitative expressions are developed that relate the expected blaze-wavelength shift to the grating constant and aperture ratio. Results are compared with experimental efficiency measurements, and the magnitude of the effect in a typical grating is discussed.

Michels, D. J.↗
NASA NTRS1975

A preliminary study of the effects of vortex diffusers (winglets) on wing flutter

Some experimental flutter results are presented for a simple, flat-plate wing model and for the same wing model equipped with two different upper surface vortex diffusers over the Mach number range from about 0.70 to 0.95. Both vortex diffusers had the same planform, but one weighed about 0.3 percent of the basic wing weight, whereas the other weighed about 1.8 percent of the wing weight. The addition of the lighter vortex diffuser reduced the flutter dynamic pressure by about 3 percent; the heavier vortex diffuser reduced the flutter dynamic pressure by about 12 percent. The experimental flutter results are compared at a Mach number of 0.80 with analytical flutter results obtained by using doublet lattice and lifting surface (Kernel function) unsteady aerodynamic theories.

Doggett, R. V., Jr.↗
NASA NTRS1976

Ground location of satellite scanner data

This paper presents simple and accurate mathematical formulation for determining the ground location of remote sensor data. The techniques used are based on elementary concepts of differential geometry and lead to the development of a relation that gives location as a function of surface ellipticity, satellite position, velocity, attitude, and scanner orientation. The formula lends itself to simply computer coding and will hopefully lead to a standardization of the various techniques which have been developed to solve this problem.

Puccinelli, E. F.↗
NASA NTRS1976

Some applications of the NASTRAN level 16 subsonic flutter analysis capability

The Level 16 flutter analysis capability was applied to an aspect-ratio-6.8 subsonic transport type wing, an aspect-ratio-1.7 arrow wing, and an aspect-ratio-1.3 all movable horizontal tail with a geared elevator. The transport wing and arrow wing results are compared with experimental results obtained in the Langley transonic dynamic tunnel and with other calculated results obtained using subsonic lifting surface (kernel function) unsteady aerodynamic theory.

Doggett, R. V., Jr.↗
NASA NTRS1977

Effect of Vibration on Retention Characteristics of Screen Acquisition Systems

An analytical and experimental investigation of the effect of vibration on the retention characteristics of screen acquisition systems was performed. The functioning of surface tension devices using fine-mesh screens requires that the pressure differential acting on the screen be less than its pressure retention capability. When exceeded, screen breakdown will occur and gas-free expulsion of propellant will no longer be possible. An analytical approach to predicting the effect of vibration was developed. This approach considers the transmission of the vibration to the screens of the device and the coupling of the liquid and the screen in establishing the screen response. A method of evaluating the transient response of the gas/liquid interface within the screen was also developed.

Tegart, J. R.↗