Fabrication of radioactive and non-radioactive titanate and zirconate ceramics for immobilization of
Explore the source record for details and available documents.
Reiser, Joelle T.↗
SEARCH · Search NASA
Results for “Waste Forms”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Sol-gel Synthesis and Characterization of Gels with Compositions Relevant to Hydrated Glass Alteration Layers
During the processes associated with glass corrosion, porous alteration gel layers typically form upon exposure to aqueous conditions for extended time periods. The impacts of the alteration gel layer on glass durability have not been agreed upon in the glass science community. In particular, the formation mechanisms of the alteration gel layers are still largely unknown and require further investigation. However, alteration gel layers often require months to years to develop and are often too thin to adequately characterize. Meanwhile, silicate sol-gels are relatively easy to synthesize in bulk with custom compositions relevant to alteration gel layers. If glass alteration gel layers and synthetic sol-gel silicate gels demonstrate physical and chemical properties that are sufficiently similar, synthetic silicate gels could be used as analogues for glass alteration gel layers in future studies. In this study, sol-gels were made with custom compositions at various pH values to evaluate the effect of pH on gel structure and morphology. Several other variables were examined as well, such as composition, drying, and aging. Sol-gels were created by sequential additions of organometallic precursors in a single container. Synthesis procedural steps are provided in further detail within the text. Sol-gels were analyzed with several techniques including Small Angle X-ray Scattering (SAXS), gas adsorption, and He pynchometry to determine the effects of the variables on physical properties. Results show that sol-gels prepared at pH 3 consistently contained fewer primary particles with diameters larger than 72 Å and fewer pores with diameters larger than 300 Å compared to sol-gels synthesized at pH 7 and 9. Composition was shown to have no discernable effect on primary particle and pore sizes at any pH.
Reiser, Joelle TG↗
Solution-derived sodalite made with Si- and Ge-ethoxide precursors for immobilizing electrorefiner salt
Not Available
Riley, Brian J.↗
Preliminary IHLW Formulation Algorithm Description
This report documents the initial algorithm that could be used by the Waste Treatment and Immobilization Plant (WTP) in batching high-level waste (HLW) and glass-forming chemicals (GFCs) in the HLW melter feed preparation vessel (MFPV) (HFP-VSL-00001 and -00005). Not all Hanford tank waste can be accommodated by the models developed for this report and significant expansion of the model boundaries could be achievable to reduce the WTP mission life and total canister production count. The immobilized HLW (IHLW) must meet a series of constraints to be acceptable for disposal in the Monitored Geologic Repository, which are contained in the Specification 1 of the Contract (DOE 2000), the Waste Acceptance Product Specifications (WAPS, DOE 1996), and the Waste Acceptance System Requirements Document (WASRD, DOE 2007). The IHLW Waste Form Compliance Plan (WCP, 24590-HLW-PL-RT-07-0001, Rev 3) specifies that the formulation algorithm will be developed and used to comply with the constraints associated with glass composition and properties. This report is not an engineering calculation, does not provide design input, and is not an engineering study. Algorithm inputs include the chemical analyses of the blended HLW in the HLW blend vessel (HBV) (HLP-VSL-00028, the volume and composition of the MFPV heel, the volume and composition of the MFPV after waste addition, the volume and composition of MFPV batch after GFC addition, the compositions of individual GFCs, and the mass of glass in each canister. In addition to these inputs, uncertainties in the HLW composition and processing parameters are included in the algorithm. Using the above inputs, the algorithm calculates the following outputs: 1) the volume of HLW to be transferred from the HBV to the MFPV, 2) the mass of each GFC for addition to the MFPV, 3) the composition of the glass that will be produced along with uncertainties, and 4) the predicted properties, with associated uncertainties, of the resulting IHLW. The algorithm uses the property-composition models to calculate properties with associated uncertainties and compares them with various constraints to ensure that a processable feed is formulated and a compliant IHLW is produced. The GFC additions are determined using an optimization approach to provide high confidence that the HLW glass will meet all product quality requirements and key processing constraints. For most HLW batches there are many possible glass compositions that meet all constraints. In these cases, the glass composition is optimized for a series of target component concentrations and target property values. The algorithm also incorporates process measurement and product quality uncertainties, based on the work of Piepel et al. (2005). Estimates of the various process and measurement uncertainties that affect glass compositions and predicted glass properties have been previously reported (Piepel et al. 2005, 2006) and the impacts of these estimated uncertainties on the IHLW composition envelope that meets product quality and processing-related properties with sufficient confidence were evaluated. The details of work performed to date to develop this initial GFC addition and batching algorithm are summarized in Sections 4 and 5. An example data set is used to illustrate the calculations of the algorithm summarized in Section 6. Finally, in Section 7, there is a statement of the required work to achieve a final operational IHLW formulation control algorithm. This report is not an engineering calculation, does not provide design input, and is not an engineering study.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Molten Flux Synthesis of Plutonium (IV) Silicates K 2 PuSi 2 O 7 and Rb 2 PuSi 6 O 15
Few plutonium containing silicates have been reported in the literature and only one other tetravalent plutonium silicate structure has been reported using the flux growth method. With the goal of understanding actinide incorporation into silicates, we describe herein two new plutonium (IV) silicates, Rb 2 PuSi 6 O 15 and K 2 PuSi 2 O 7 , synthesized using a mixed alkali chloride/alkali fluoride flux growth. Both structures crystallize in the C2/c space group with lattice parameters a=24.2980(10) Å, b=7.1466(3) Å, c=17.2025(8) Å and $\blacksquare$96.6560(10)° for Rb 2 PuSi 6 O 15 , and a=9.9478(2) Å, b=5.59820 (10) Å, c=13.1848(2) Å, and $\blacksquare$105.7400(10)° for K 2 PuSi 2 O 7 . Comparisons to the synthesis of other reported alkali actinide silicates (Ce, U, and Th) are made. Raman spectra and DFT calculations of formation enthalpies and vibrational modes provide confirmation of structure refinements and enhanced product characterization for comparison with other materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A GPU Accelerated Mixed‐Precision Finite Difference Informed Random Walker (FDiRW) Solver for Strongly Inhomogeneous Diffusion Problems
In nature, many complex multi‐physics coupling problems exhibit significant diffusivity inhomogeneity, where one process occurs several orders of magnitude faster than others temporally. Simulating rapid diffusion alongside slower processes demands intensive computational resources due to the necessity for small time steps. To address these computational challenges, we have developed an efficient numerical solver named Finite Difference informed Random Walker (FDiRW). In this study, we propose a GPU‐accelerated, mixed‐precision configuration for the FDiRW solver to maximize efficiency through GPU multi‐threaded parallel computation and lower precision computation. Numerical evaluation results reveal that the proposed GPU‐accelerated mixed‐precision FDiRW solver can achieve a 117× speedup over the CPU baseline, while an additional 1.75× speedup is achieved by employing lower precision GPU computation. Notably, for large model sizes, the GPU‐accelerated mixed‐precision FDiRW solver demonstrates strong scaling with the number of nodes used in simulation. When simulating radionuclide absorption processes by porous wasteform particles with a medium‐sized model of 192 × 192 × 192, this approach reduces the total computational time to 10 min, enabling the simulation of larger systems with strongly inhomogeneous diffusivity.
97 MATHEMATICS AND COMPUTING↗
Irradiated FA Structural Materials Conditioning by Induction-Slag Remelting in a Cold Crucible
A method of managing one type of radwaste forming during BREST-300 reactor operation – the structural materials of FA – is described. In the module developed for reprocessing, the fissile materials losses together with all forms of waste must not exceed 0.1% of the initial amount, in connection with which the maximum admissible content of facade materials and structural materials sent into long-term storage must not exceed 0.001% by weight. Only the plutonium content may reach 0.015% by weight, which makes it necessary to perform additional purification and return fissile materials into the nuclear fuel cycle. A method of reprocessing the structural materials of irradiated fuel elements is proposed on the basis of induction-slag remelting in a cold crucible, which makes it possible to conduct purification to the desired index value. The operating regime of the melting unit and the qualitative composition of the employed flux that make it possible to reach the required level of purification by removal of fissile materials are described.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Addressing Criticality in Rare Earth Elements via Permanent Magnets Recycling
Rare earth elements (REEs) are critical for many advanced technologies and are faced with potential supply disruptions. Recycling of permanent magnets (PMs) can be good sources for REEs which can help minimize global dependence on freshly mined REEs, but PMs are rarely recycled. Recycling of PMs has been discussed with respect to improving REEs resource sustainability. Some challenges to be addressed in order to establish industrially deployable technologies for PMs recycling have also been discussed, including profitability, energy efficiency and environmental impacts. Key considerations for promoting circular economy via PMs recycling is proposed with the focus on deciding the target points in the supply chain at which the recycled products will be inserted. Important technical considerations for recycling different forms of waste PMs, including swarfs, slags, shredded and intact hard disk drives magnets, have been presented. Lastly, the aspects of circular economy considered include reusing magnets, remanufacturing magnets and recovering of REEs from waste PMs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Chapter 10 - Thermal Energy Harvesting Using Thermomagnetic Effect
Low-grade thermal energy, either in the form of waste heat or nature heat, is available abundantly around us. Since Carnot efficiency reduces with decrease in operating temperature difference, there are very limited practical options for low-grade thermal energy conversion. Thermomagnetic effect is the effect of heat on magnetic properties of a material. This phenomenon can be used to generate electricity using either direct thermal to electrical energy conversion or indirect thermal to mechanical energy conversion. This chapter provides a broad overview of various aspects of thermomagnetic energy conversion. We first explain the working principle behind the thermomagnetic energy harvesting. We then formulate mathematical equations needed to calculate the work output and energy conversion efficiency of a thermomagnetic cycle. Based on this formulation, we provide a list of working materials that can be employed in the thermomagnetic harvesters. At last, we describe various thermomagnetic harvesters proposed in the literature.
ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗
Chemical durability of multicomponent lanthanide zirconate solid solutions
Multicomponent zirconate solid solutions A 2 Zr 2 O 7 (A= (Sm,Yb), (Sm,Yb,Gd), (Sm,Yb,Gd,Er), and (Sm,Yb,Gd,Er,Dy)) were synthesized through spark plasma sintering and their chemical durability was investigated via semi-dynamic leaching tests in pH = 1 nitric acid at 90°C. Incongruent dissolution occurred for all samples with the preferential elemental release of zirconium in all A 2 Zr 2 O 7 except for high entropy (Sm,Yb,Gd,Er,Dy)Zr 2 O 7 which displays a congruent release of the A-site elements and Zr. A strong positive correlation was found between the lanthanide elemental release rates and the A-site cation size disorder, whereas a negative correlation was observed between the elemental release rates and mixing entropy.
36 MATERIALS SCIENCE↗
The function of Sn(II)-apatite as a Tc immobilizing agent
Technetium-99 is a radioactive contaminant of high concern at many nuclear waste storage sites. At the U.S. Department of Energy Hanford Site, 99Tc is a component of low-activity waste (LAW) fractions of the nuclear tank waste, which are highly caustic, high ionic strength and have high concentrations of chromate. Removal of 99Tc from LAW streams would greatly benefit the site remediation process. In this study, we investigated the removal of 99Tc(VII), as pertechnetate, from deionized water (DIW) and a LAW simulant using two solid sorbents, tin (II) apatite (Sn-A) and SnCl2 through batch sorption testing and solid phase characterization. Sn-A showed higher levels of removal of Tc from both DIW and LAW simulant compared with the SnCl2. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/XEDS) and X-ray adsorption spectroscopy (XAS) of Sn-A following batch experiments in DIW showed that TcO4- is reduced to Tc(IV) on the Sn-A surface with no incorporation into the lattice structure of Sn-A. The performance of Sn-A in the LAW simulant was lowered due to a combined effect of the high alkalinity, which lead to an increased dissolution of Sn from the Sn-A, and a preference for the reduction of Cr(VI) over Tc(VII).
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Sustainable sanitary landfills for neglected small cities in developing countries: The semi-mechanized trench method from Villanueva, Honduras
Highlights: Black-Right-Pointing-Pointer Open dumping is the most common form of waste disposal in neglected small cities. Black-Right-Pointing-Pointer Semi-mechanized landfills can be a sustainable option for small cities. Black-Right-Pointing-Pointer We present the theory of design and operation of semi-mechanized landfills. Black-Right-Pointing-Pointer Villanueva, Honduras has operated its semi-mechanized landfill for 15 years. Black-Right-Pointing-Pointer The cost of operation is US$4.60/ton with a land requirement of 0.2m{sup 2}/person-year. - Abstract: Open dumping is the most common practice for the disposal of urban solid wastes in the least developed regions of Africa, Asia and Latin America. Sanitary landfill design and operation has traditionally focused on large cities, but cities with fewer than 50,000 in population can comprise from 6% to 45% of a given country's total population. These thousands of small cities cannot afford to operate a sanitary landfill in the way it is proposed for large cities, where heavy equipment is used to spread and compact the waste in daily cells, and then to excavate, transport and apply daily cover, and leachate is managed with collection and treatment systems. This paper presents an alternative approach for small cities, known as the semi-mechanized trench method, which was developed in Villanueva, Honduras. In the semi-mechanized trench method a hydraulic excavator is used for 1-3 days to dig a trench that will last at least a month before it is filled with waste. Trucks can easily unload their wastes into the trench, and the wastes compact naturally due to semi-aerobic biodegradation, after which the trenches are refilled and covered. The exposed surface area is minimal since only the top surface of the wastes is exposed, the remainder being covered by the sides and bottom of the trench. The surplus material from trench excavation can be valorized for use as engineering fill onsite or off. The landfill in Villanueva has operated for 15 years, using a total land area of approximately 11 ha for a population that grew from 23,000 to 48,000, with a land requirement of 0.2 m{sup 2}/person year, a cover to waste ratio of 0.2, and an estimated soil surplus of 298,000 m{sup 3} that is valorized and used onsite. The landfill has been operated solely by the municipality with an operational cost in 2010 estimated at US$4.60 per ton. A modified water balance analysis at Villanueva shows negligible leachate generation from covered trenches and 700 m{sup 3}/yr (60 m{sup 3}/ha yr) from the two open trenches required for daily operation. If the site were an open dump, however, leachate generation is estimated to be 3900 m{sup 3}/ha yr and contaminated runoff 5000 m{sup 3}/ha yr. A simple model used to estimate dilution of generated leachate based on groundwater flow data and aquifer stratigraphy suggests that the leachate will be diluted by a factor of 0.01 in the aquifer. Leachate contaminants will not accumulate because the aquifer discharges to the Ulua River 2 km south of the landfill. While not suitable for all sites, the Villanueva method nevertheless serves as an excellent example of how a small city landfill with natural compaction of waste and attenuation of leachate can be sustainably operated.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Thermodynamics of CeSiO 4 : Implications for Actinide Orthosilicates
Zircon (ZrSiO 4 : I4 1 /amd) can accommodate actinides, such as thorium, uranium, and plutonium. The zircon structure has been determined for several of the end member compositions of other actinides, such as plutonium and neptunium. However, the thermodynamic properties of these actinide zircon structure-types are largely unknown due to the difficulties in synthesizing these materials and handling transuranium actinides. Thus, we have completed a thermodynamic study of cerium orthosilicate, stetindite (CeSiO 4 ), a surrogate of PuSiO 4 . For the first time, the standard enthalpy of formation of CeSiO 4 was obtained by high temperature oxide melt solution calorimetry to be -1971.9 ± 3.6 kJ/mol. Stetindite is energetically metastable with respect to CeO 2 and SiO 2 by 27.5 ± 3.1 kJ/mol. The metastability explains the rarity of the natural occurrence of stetindite and the difficulty of its synthesis. Applying the obtained enthalpy of formation of CeSiO 4 from this work, along with those previously reported for USiO 4 and ThSiO 4 , we developed an empirical energetic relation for actinide orthosilicates. Here, the predicted enthalpies of formation of AnSiO 4 are then made with a discussion of future strategies to efficiently immobilize Pu or minor actinides in the zircon structure.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High-Temperature Thermodynamics of Cerium Silicates, A-Ce 2 Si 2 O 7 , and Ce 4.67 (SiO 4 ) 3 O
Lanthanide disilicates and oxyapatites have potential roles in high temperature applications as thermal (TBC) and environmental barrier coatings (EBC), or possible alteration phases in geological nuclear waste repositories. However, those Ce 3+ -bearing silicates have only been limitedly studied. In this work, we performed detailed structural and thermodynamic investigations on A-Ce 2 Si 2 O 7 (tetragonal, P4 1 ) and Ce 4.67 (SiO 4 ) 3 O (hexagonal, P6 3 /m). The high temperature structural behaviors and coefficients of thermal expansion were determined by in situ high temperature synchrotron X-ray diffraction (HT-XRD) implemented with Rietveld analysis and thermogravimetric analysis coupled with differential scanning calorimetry (TGA-DSC). A-Ce 2 Si 2 O 7 was found to be stable in N 2 and air up to ~1483 K with anisotropic thermal expansion along the a and c axes (α a = 12.3 × 10 -6 K -1 and α c = 12.4 × 10 -6 K -1 ). Ce 4.67 (SiO 4 ) 3 O had a slow partial oxidation between 533 K and 873 K to a new nonstoichiometric phase Ce 3+ 1.67- xCe4 + x Ce 3+ 3 (SiO 4 ) 3 O 1+0.5x , followed by a thermal decomposition to CeO 2 and SiO 2 at ~1000 K in air. By using high temperature oxide melt solution calorimetry at 973 K with lead borate as the solvent, the standard enthalpy of formation was determined for A-Ce 2 Si 2 O 7 (-3825.1 ± 6.0 kJ/mol) and Ce 4.67 (SiO 4 ) 3 O (-7391.3 ± 9.5 kJ/mol). Finally, these thermodynamic parameters were compared with those of CeO 2 , CeSiO 4 , and other silicate oxyapatites for examining their chemical stability in high temperature environments relevant for aeronautical applications, mineral formation, and nuclear fuel cycle.
36 MATERIALS SCIENCE↗
Dechlorination Apparatus for Treating Chloride Salt Wastes: System Evaluation and Scale-Up
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Influence of Metal Ion Complexation on the Radiolytic Longevity of Butyramide Extractants under Direct Dissolution Process Conditions
The direct dissolution of voloxidized used nuclear fuel (UNF) into an organic solution–comprised of diluent and specialized extractants–poses a promising alternative to the traditional liquid–liquid solvent extraction approach to reprocessing UNF. However, moving to direct dissolution removes the presence of a concentrated nitric acid aqueous phase, which has been shown to significantly influence the radiolytic longevity of extractants in conventional extraction flowsheets. Given the limited knowledge of radiation effects under direct dissolution conditions, here we present a time-resolved and dose-accumulation study on the impact of direct dissolution conditions on the radiolytic longevity of two candidate butyramide extractants, N,N-di(2-ethylhexyl) butyramide (DEHBA) and N,N-di(2-ethylhexyl)isobutyramide (DEHiBA), in pre-equilibrated n-dodecane solvent in the presence and absence of process-relevant metal ions, specifically, uranium and rhenium. Loss G(DEHBA) and G(DEHiBA) values were found to be comparable to each other, with an average of 0.37 ± 0.02 μmol J –1 , and to previous data from the γ irradiation of DEHBA and DEHiBA under conventional solvent extraction conditions. Rhenium, and by extension technetium, extraction had a modest decrease (~10%) in the overall radiolytic stability of DEHiBA only, despite >2× observed increases in chemical kinetic reactivity of the corresponding complexes with the n-dodecane radical cation. Uranium loading, on the other hand, significantly improved the lifetime of both ligands (>30%) under γ irradiation, with a greater stabilization observed for DEHBA over DEHiBA. The observed radioprotective effect afforded by uranium loading is fortuitous for the longevity of direct dissolution solvent.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Multifaceted Modularity: A Key for Stepwise Building of Hierarchical Complexity in Actinide Metal–Organic Frameworks
Growing necessity for efficient nuclear waste management is a driving force for development of alternative architectures towards fundamental understanding of mechanisms involved in actinide integration inside extended structures. In this manuscript, metal-organic frameworks (MOFs) were investigated as a model system for engineering radionuclide containing materials through utilization of unprecedented MOF modularity, which cannot be replicated in any other type of materials. Through the implementation of recent synthetic advances in the MOF field, hierarchical complexity of An-materials were built stepwise, which was only feasible due to preparation of the first examples of actinide-based frameworks with “unsaturated” metal nodes. The first successful attempts of solid-state metathesis and metal node extension in An-MOFs are reported, and the results of the former approach revealed drastic differences in chemical behavior of extended structures versus molecular species. Successful utilization of MOF modularity also allowed us to structurally characterize the first example of bimetallic An-An nodes. To the best of our knowledge, through combination of solid-state metathesis, guest incorporation, and capping linker installation, we were able to achieve the highest Th wt% in mono- and bi-actinide frameworks with minimal structural density. Overall, combination of a multistep synthetic approach with homogeneous actinide distribution and moderate solvothermal conditions could make MOFs an exceptionally powerful tool to address fundamental questions responsible for chemical behavior of An-based extended structures, and therefore, shed light on possible optimization of nuclear waste administration.
Actinide↗
Neutron Total Scattering Analysis of Materials for the Nuclear Fuel Cycle
Here, this paper reviews recent experimental efforts at the University of Tennessee and Oak Ridge National Laboratory to comprehensively characterize the structural details of materials relevant for the nuclear fuel cycle by employing advanced neutron scattering techniques. For the study of nuclear ceramics, neutron scattering offers distinct advantages over traditional laboratory or synchrotron X-ray diffraction, including enhanced sensitivity to elements with a low atomic mass, such as oxygen, nitrogen, and carbon. The key to these efforts is the recent advancement in the neutron scattering infrastructure at the high-flux diffractometers at the Spallation Neutron Source. The high neutron flux at these instruments enables neutron total scattering, a nondestructive bulk technique that simultaneously captures both short-range structural effects through pair distribution function analysis and long-range order through diffraction pattern analysis. This approach is particularly important for a comprehensive description of defective, disordered, or amorphous nuclear materials. The case studies presented here include analyses of the local defect structure in hyperstoichiometric uranium oxides and short-range order of ion-irradiated ceramics. This advanced analytical methodology will improve our understanding of the behavior of materials in extreme environments and contribute to the development of more resilient nuclear materials.
Neutron scattering↗