Search NASA⌕ Search

SEARCH · Search NASA

Results for “active surface area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Formation of the pore structure of brown coal upon thermolysis with potassium hydroxide

The pore-structure characteristics of active carbons prepared by the thermolysis (800{sup o}C) of brown coal impregnated with potassium hydroxide were studied. The dependence of the specific surface area, total pore volume, micropore volume, micropore fraction, and micropore size distribution on the KOH/coal weight ratio R{sub KOH}{le} 1.0 g/g was found. Condensation processes with the formation of a low-porosity material were predominant at low ratios of R{sub KOH} {le} 0.1 g/g. The development of a micropore structure was observed at R{sub KOH} {ge} 0.1 g/g, and it increased as R{sub KOH} was increased to 1.0 g/g. It was hypothesized that pore formation was due to the thermally initiated reactions of the structural fragments of coal with KOH molecules, which occurred within the framework of coal.

01 COAL, LIGNITE, AND PEAT↗

Radon Fluxes from an Earthen Barrier Over Uranium Mill Tailings After Two Decades of Service - 17234

Radon (Rn) fluxes were measured at a disposal facility for uranium mill tailings after two decades of service. The facility was closed with an earthen cover vegetated with grasses. Measurements were made on the surface of the Rn barrier and directly on the surface of the tailings. Fluxes were measured using extra small (area = 0.018 m{sup 2}), small (0.071 m{sup 2}), medium (0.59 m{sup 2}), and large (2.32 m{sup 2}) flux chambers to evaluate the impact of measurement scale on Rn flux. Activated carbon (AC) passive collectors and electric radon detectors (RAD7) were used to measure Rn concentrations. Tests were conducted at various locations on each cover representing conditions that can lead to different levels of soil structural development and different water content. Rn fluxes at the surface of the Rn barrier were much lower than Rn fluxes measured at the surface of the tailings, indicating the barrier remained effective for Rn containment. Geometric mean Rn fluxes measured at the surface of the Rn barrier in each test pit were below the regulatory requirement (0.74 Bq/m{sup 2}- s). Rn concentrations measured using AC samplers in the flux chambers were 60% of concentrations measured using the RAD7, on average, and Rn fluxes computed with the AC data were 9% of those computed with the RAD7 data, on average. Size of the flux chamber had no systematic effect on Rn flux, indicating that 20 y of soil forming processes had not created a pore network causing scale-dependent Rn flux. Geometric mean Rn fluxes in the test pits were similar regardless of differences in surface conditions (vegetation, thickness of soil cover) known to influence soil forming processes and soil structure, but were lower in areas where surface conditions promoted higher water content in the Rn barrier. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of reductive treatments on Pt behavior and NOx storage in lean NOx trap catalysts

Lean NOx trap (LNT) catalysts represent a promising approach to meet increasingly stringent NOx emission regulations on diesel and other lean-burn engines. Pt material properties, including dispersion and particle size, are known to be important factors in determining NOx uptake performance, since Pt provides active sites for NO oxidation to NO2 necessary for storing NOx as nitrates, and for the reduction of nitrates to N2. In this work, the physicochemical properties of Pt in Pt-BaO/Al2O3 LNT catalysts, such as the Pt accessible surface area and particle size, were investigated by using various tools, such as irreversible volumetric H2 chemisorption, high resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD), following successive reductive treatments at elevated temperatures. NOx uptake activities were also measured to establish a relationship between the properties of Pt and NOx storage following identical high-temperature reductive treatments. We find that the reductive treatments of Pt-BaO/Al2O3 lean NOx trap catalysts at temperatures up to 500 ºC promote a significant increase in NOx uptake explained, in part, by an induced close interaction between Pt and BaO phases in the catalyst, thus enabling facilitation of the NOx storage process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and photocatalytic performance of g-C{sub 3}N{sub 4} nanosheets via liquid phase stripping

Well dispersed g-C{sub 3}N{sub 4} nanosheets were prepared by exfoliating the bulk g-C{sub 3}N{sub 4} in concentrated sulfuric acid. Phase structures, morphologies and elemental compositions were characterized by X-ray diffractometer, scanning electron microscope, transmission electron microscope and X-ray photoelectron spectrometer, respectively. Optical absorption and photoluminescence were also used to explain the optical performances of samples. NaI, BQ and IPA were used as the sacrificial agents for studying the surface reactions in the photocatalytic process. By the precipitation of g-C{sub 3}N{sub 4} nanosheets in ethanol with different ratios between concentrated sulfuric acid and ethyl alcohol, well dispersed g-C{sub 3}N{sub 4} nanosheets with high specific surface area can be obtained. The optimized g-C{sub 3}N{sub 4} (1:10) nanosheets achieve the highest photocatalytic activities under UV light illumination, which can degrade 10 mg/L RhB about 98% in 60 min, which is 6 times that of bulk g-C{sub 3}N{sub 4} under UV light. - Graphical Abstract: The schematic diagram of photocatalysis and excellent photocatalytic performance of g-C{sub 3}N{sub 4} nanosheets. - Highlights: • Well dispersed g-C{sub 3}N{sub 4} were prepared via Liquid Phase Stripping. • The g-C{sub 3}N{sub 4} is in a sheet like structure after being exfoliated. • The g-C{sub 3}N{sub 4} nanosheets possess high photocatalytic performances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of heterogeneous nucleation in supersaturated vapor: Fundamental limits to neutral particle detection revisited

We examine the nucleated (with barrier) activation of perfectly wetting (zero contact angle) particles ranging from essentially bulk size down to approximately 1-nm mass diameter. While similar studies trace back to the pioneering work of Fletcher, we present here a novel approach to the analysis based on general area constructions that enable key thermodynamic properties, including surface and bulk contributions to nucleation work, to be interpreted geometrically with reference to the Kelvin curve. The kinetics of activation are described in more detail in terms of the mean first passage time (MFPT) for barrier crossing. MFPT theory and benchmark calculations are used to develop and test a new approximate-but-simpler-to-use analytic expression for the barrier crossing rate. The present study is motivated by recent condensation particle counter (CPC) studies that appear to finally establish the long-predicted detection of 'sub-Kelvin' particles in the nano-size regime. Corresponding states thermodynamic and kinetic scaling approaches are used to facilitate the correlation and selection of optimal CPC working fluids and operating conditions based on a new metric for heterogeneous nucleation, the signal-to-noise ratio, and physical and chemical properties.

54 ENVIRONMENTAL SCIENCES↗

An efficient visible-light photocatalyst prepared by modifying AgBr particles with a small amount of activated carbon

Highlights: • An efficient visible-light photocatalyst was prepared by modifying AgBr particles. • A small amount of activated carbon was used to modify AgBr particles. • The modified AgBr exhibited improved visible-light photocatalytic performances. - Abstract: An efficient visible-light photocatalyst was successfully prepared by modifying AgBr particles with a small amount of activated carbon (AC) via a simple chemical precipitation approach. The AC/AgBr composite was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, UV–vis diffuse reflection spectroscopy, photoluminescence spectroscopy, electrochemical impedance spectroscopy. The photocatalytic performances of the AC/AgBr composite were investigated by evaluating photodegradation of methyl orange (MO) and phenol under visible light irradiation, and the effects of the AC content in the composite, concentrations of AC/AgBr composite and MO, carrier scavengers on MO photodegradation rate were systematically investigated. The results indicated that the modification of AC can hardly change the crystalline and crystal size of AgBr particles, while significantly improve their specific surface areas, visible-light absorption and separation efficiency of photogenerated electron–hole pairs. Compared with pure AgBr, the AC/AgBr composite exhibited drastically enhanced visible-light photocatalytic activity and stability. The photogenerated electrons and holes, hydroxyl radicals are responsible to the photodegradation of organic pollutants, and the photogenerated holes are the main active species. On the basis of the results and the properties of AC and AgBr, the visible-light photocatalytic mechanism of the AC/AgBr composite was discussed.

36 MATERIALS SCIENCE↗

Encapsulation of Wastes Using Adapted Geopolymer Formulations - 20272

A geopolymer formulation characterized by a low initial viscosity, suitable to immobilise a wide range of waste types such as oils, chemicals and solid waste, is introduced and characterized. The role of the specific surface area of magnesium oxide additions to the reference formulation is presented. Moreover, its capability to encapsulate different volume fractions of oil via the preparation of oil in activator solution emulsions is introduced. Lastly, the effect of oil incorporation on the density, the mechanical strength and the leaching properties of the compositions is presented and discussed. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel TiO{sub 2} prepared from titanyl sulphate by using pressurized water processing and its photocatalytic activity evaluation

Highlights: • A novel preparation approach of TiO{sub 2} anatase from titanyl sulphate by using pressurized water processing. • Processing temperature affects crucially the TiO{sub 2} anatase crystallization. • Correlation between Raman FWHMs and XRD determined anatase crystallites-size enabling the estimation of anatase crystallites-size from Raman spectra. • The anatase crystallite-size and surface area are determining properties in AO7 photo-discolorization. • The band gap structure and rate of recombination of electrons and holes are the determining properties in N{sub 2}O photodecomposition. - Abstract: TiO{sub 2} anatase was prepared by a novel preparation approach, combining utilization of titanyl sulphate as a precursor and pressurized water processing. In addition, two different chemical methods for preparation were used – thermal hydrolysis and induced hydrolysis. The photoactivity of developed TiO{sub 2} was examined in two environmentally-prospective reactions: azo-dye AO7 photodiscoloration (oxidation) and N{sub 2}O photodecomposition (reduction). It was revealed that during the processing the temperature has a crucial effect on TiO{sub 2} crystallization contrary to pressure. TiO{sub 2} anatase of smaller crystallite-size showed significantly higher photoactivity in AO7 photodiscoloration than TiO{sub 2} anatase of large crystallite-size. However, in N{sub 2}O photodecomposition all synthesized materials showed comparable activity. While the TiO{sub 2} anatase crystallite-size and surface area are the determining properties in azo-dye AO7 photodiscoloration, the electronic band structure and recombination rate of electron and holes are determining in N{sub 2}O photodecomposition. The correlation enabling the estimation of TiO{sub 2} anatase crystallite-size from Raman FWHMs was found as well.

36 MATERIALS SCIENCE↗

The AMWCNTs supported porous nanocarbon composites for high-performance supercapacitor

Graphical abstract: The AMWCNTs supported porous nanocarbon composites were prepared by a easy method. The composites had shown good performances for electrochemical energy storage with high specific capacitance and good stability. - Highlights: • The AMWCNTs supported porous nanocarbon composites were prepared. • The composites have good conductivity and large BET specific surface areas. • The composites had shown high specific capacitance, and good stability. - Abstract: The porous nanocarbons supported by acid-treated multiwall carbon nanotubes (PC@ACNTs) were prepared by the combination of the hydrothermal polymerization of glucose on ACNTs, carbonization under N{sub 2} protection and final activation with ZnCl{sub 2}. The materials were characterized by transmission electron microscopy, X-ray powder diffraction and Raman spectra. The results indicated that the ACNTs distributed uniformly into the framework of the porous carbon. The composites showed the high BET specific surface area up to 1712 m{sup 2} g{sup −1} and good conductivity. The electrochemical measurements indicated that the composites processed good performances for electrochemical energy storage (210 F g{sup −1} at 0.5 A g{sup −1}), and high stability (>99.9%), much higher than the corresponding ACNTs, porous carbons and the samples prepared by using raw MWCNTs as source. The good performance of PC@ACNTs composites was relative with the synergy of good conductivity of ACNTs and large specific surface areas of PC.

36 MATERIALS SCIENCE↗

A Surface‐Strained and Geometry‐Tailored Nanoreactor that Promotes Ammonia Electrosynthesis

Abstract A surface‐strained and geometry‐optimized TiO 2 nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti 3+ sites, demonstrating a more favorable pathway for the N 2 activation and selective NH 3 production with a faster kinetic rate than the pristine TiO 2 . The TiO 2 ‐based nanoreactor with surface and bulk structure tailoring delivered an NH 3 yield rate up to 5.50 μg h −1 cm −2 (16.67 μg h −1 mg cat −1 ) and high faradaic efficiency of 26 % under ambient aqueous conditions. Our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.

Li, Panpan↗

A Surface-Strained and Geometry-Tailored Nanoreactor that Promotes Ammonia Electrosynthesis

A surface-strained and geometry-optimized TiO 2 nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti 3+ sites, demonstrating a more favorable pathway for the N 2 activation and selective NH 3 production with a faster kinetic rate than the pristine TiO 2 . The TiO 2 -based nanoreactor with surface and bulk structure tailoring delivered an NH 3 yield rate up to 5.50 μg h -1 cm -2 (16.67 μg h -1 mg cat -1 ) and high faradaic efficiency of 26 % under ambient aqueous conditions. Furthermore, our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FORMATION AND EVOLUTION OF CORONAL HOLES FOLLOWING THE EMERGENCE OF ACTIVE REGIONS

The low level of solar activity over the past four years has provided unusually favorable conditions for tracking the formation and evolution of individual coronal holes and their wind streams. Employing extreme-ultraviolet images recorded with the Solar Terrestrial Relations Observatory during 2007-2009, we analyze three cases in which small coronal holes first appear at the edges of newly emerged active regions and then expand via flux transport processes, eventually becoming attached to the polar holes. The holes form gradually over timescales comparable to or greater than that for the active regions to emerge, without any obvious association with coronal mass ejections. The evolving hole areas coincide approximately with the footpoints of open field lines derived from potential-field source-surface extrapolations of the photospheric field. One of these coronal-hole systems, centered at the equator and maintained by a succession of old-cycle active regions emerging in the same longitude range, persists in one form or another for up to two years. The other two holes, located at midlatitudes and originating from new-cycle active regions, become strongly sheared and decay away after a few rotations. The hole boundaries and the small active-region holes, both of which are sources of slow wind, are observed to undergo continual short-term ({approx_lt}1 day) fluctuations on spatial scales comparable to that of the supergranulation. From in situ measurements, we identify a number of plasma sheets associated with pseudostreamers separating holes of the same polarity.

79 ASTRONOMY AND ASTROPHYSICS↗

Uniform Pt/Pd Bimetallic Nanocrystals Demonstrate Platinum Effect on Palladium Methane Combustion Activity and Stability

Bimetallic catalytic materials are in widespread use for numerous reactions, as the properties of a monometallic catalyst are often improved upon addition of a second metal. In studies with bimetallic catalysts, it remains challenging to establish clear structure–property relationships using traditional impregnation techniques, due to the presence of multiple coexisting active phases of different sizes, shapes, and compositions. Here, a convenient approach to prepare small and uniform Pt/Pd bimetallic nanocrystals with tailorable composition is demonstrated, despite the metals being immiscible in the bulk. By depositing this set of controlled nanocrystals onto a high-surface-area alumina support, we systematically investigate the effect of adding platinum to palladium catalysts for methane combustion. At low temperatures and in the absence of steam, all bimetallic catalysts show activity nearly identical with that of Pt/Al 2 O 3 , with much lower rates in comparison to that of the Pd/Al 2 O 3 sample. BUt, unlike Pd/Al 2 O 3 , which experiences severe low-temperature steam poisoning, all Pt/Pd bimetallic catalysts maintain combustion activity on exposure to excess steam. These features are due to the influence of Pt on the Pd oxidation state, which prevents the formation of a bulk-type PdO phase. Despite lower initial combustion rates, hydrothermal aging of the Pd-rich bimetallic catalyst induces segregation of a PdO phase in close contact to a Pd/Pt alloy phase, forming more active and highly stable sites for methane combustion. Altogether, this work unambiguously clarifies the activity and stability attributes of Pt/Pd phases which often coexist in traditionally synthesized bimetallic catalysts and demonstrates how well-controlled bimetallic catalysts elucidate structure–property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development and validation of chemistry agnostic flow battery cost performance model and application to nonaqueous electrolyte systems: Chemistry agnostic flow battery cost performance model

A chemistry agnostic cost performance model is described for a nonaqueous flow battery. The model predicts flow battery performance by estimating the active reaction zone thickness at each electrode as a function of current density, state of charge, and flow rate using measured data for electrode kinetics, electrolyte conductivity, and electrode-specific surface area. Validation of the model is conducted using a 4kW stack data at various current densities and flow rates. This model is used to estimate the performance of a nonaqueous flow battery with electrode and electrolyte properties used from the literature. The optimized cost for this system is estimated for various power and energy levels using component costs provided by vendors. The model allows optimization of design parameters such as electrode thickness, area, flow path design, and operating parameters such as power density, flow rate, and operating SOC range for various application duty cycles. A parametric analysis is done to identify components and electrode/electrolyte properties with the highest impact on system cost for various application durations. A pathway to 100$kWh -1 for the storage system is identified.

25 ENERGY STORAGE↗

Augmented photocatalytic activity and luminescence response of Tb³⁺ doped nanoscale titania systems

The present work reports on the effect of Tb³⁺ doping on the luminescence and photocatalytic performance of nano-structured titania derived through a sol-gel route. X-ray diffraction patterns have revealed the existence of anatase phase with and without Tb³⁺ doping and with an improved orientation factor along (004) and (200) planes. Transmission electron microscopy and selective area electron diffraction studies, while exhibiting ample poly-crystallinity feature, have predicted an average particle size of ~9 nm and ~6 nm for the un-doped and 5% Tb³⁺ doped nano-titania samples; respectively. Apart from emissions accompanied by different types of defects, Tb³⁺ related transitions, such as, ⁵D₃ → ⁷F₅, ⁵D₃ → ⁷F₄, and ⁵D₄ → ⁷F₆ were identified in the photoluminescence spectra. Brunauer-Emmett-Teller surface area analysis, as carried out on a Tb³⁺ doped nano-titania system, has demonstrated a more-open hysteretic loop owing to significant difference of N₂ adsorption/desorption rates. The photocatalytic activity of nano-titania, as evaluated from the nature of degradation of methyl orange under UV illumination, exhibited the highest efficiency for a Tb³⁺ doping level of 2.5%. The augmented photocatalytic degradation has also been discussed in the light of a model based on pseudo first-order kinetics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rh-Based Mixed Alcohol Synthesis Catalysts: Characterization and Computational Report

The U.S. Department of Energy is conducting a program focused on developing a process for the conversion of biomass to bio-based fuels and co-products. Biomass-derived syngas is converted thermochemically within a temperature range of 240 to 330°C and at elevated pressure (e.g., 1200 psig) over a catalyst. Ethanol is the desired reaction product, although other side compounds are produced, including C 3 to C 5 alcohols; higher (i.e., greater than C 1 ) oxygenates such as methyl acetate, ethyl acetate, acetic acid and acetaldehyde; and higher hydrocarbon gases such as methane, ethane/ethene, propane/propene, etc. Saturated hydrocarbon gases (especially methane) are undesirable because they represent a diminished yield of carbon to the desired ethanol product and represent compounds that must be steam reformed at high energy cost to reproduce CO and H 2 . Ethanol produced by the thermochemical reaction of syngas could be separated and blended directly with gasoline to produce a liquid transportation fuel. Additionally, higher oxygenates and unsaturated hydrocarbon side products such as olefins also could be further processed to liquid fuels. The goal of the current project is the development of a Rh-based catalyst with high activity and selectivity to C 2 + oxygenates. This report chronicles an effort to characterize numerous supports and catalysts to identify particular traits that could be correlated with the most active and/or selective catalysts. Carbon and silica supports and catalysts were analyzed. Generally, analyses provided guidance in the selection of acceptable catalyst supports. For example, supports with high surface areas due to a high number of micropores were generally found to be poor at producing oxygenates, possibly because of mass transfer limitations of the products formed out of the micropores. To probe fundamental aspects of the complicated reaction network of CO with H 2 , a computational/ theoretical investigation using quantum mechanical and ab initio molecular dynamics calculations was initiated in 2009. Computational investigations were performed first to elucidate understanding of the nature of the catalytically active site. Thermodynamic calculations revealed that Mn likely exists as a metallic alloy with Rh in Rh-rich environments under reducing conditions at the temperatures of interest. After determining that reduced Rh-Mn alloy metal clusters were in a reduced state, the activation energy barriers of numerous transition state species on the catalytically active metal particles were calculated to compute the activation barriers of several reaction pathways that are possible on the catalyst surface. Comparison of calculations with a Rh nanoparticle versus a Rh-Mn nanoparticle revealed that the presence of Mn enabled the reaction pathway of CH with CO to form an adsorbed CHCO species, which was a precursor to C 2 + oxygenates. The presence of Mn did not have a significant effect on the rate of CH 4 production. Ir was observed during empirical catalyst screening experiments to improve the activity and selectivity of Rh-Mn catalysts. Thus, the addition of Ir to the Rh-Mn nanoparticles also was probed computationally. Simulations of Rh-Mn-Ir nanoparticles revealed that, with sufficient Ir concentrations, the Rh, Mn and Ir presumably would be well mixed within a nanoparticle. Activation barriers were calculated for Rh-Mn-Ir nanoparticles for several C-, H-, and O-containing transitional species on the nanoparticle surface. It was found that the presence of Ir opened yet another reactive pathway whereby HCO is formed and may undergo insertion with CHx surface moieties. The reaction pathway opened by the presence of Ir is in addition to the CO + CH pathway opened by the presence of Mn. Similar to Mn, the presence of Ir was not found to not affect the rate of CH 4 production.

catalyst↗

Active controls - Changing the rules of structural design.

Approaches making use of aerodynamic surfaces in combination with advanced flight computers, and electrohydraulic systems could be used to improve economics of commercial aircraft operation, smooth the passenger's ride, reduce terminal-area noise, and ease terminal-area congestion. This emerging technology is becoming known as active controls technology. Maximum benefits from active controls can come only by considering controls early in the design cycle. Active controls can save weight by reducing the structural strength necessary. Some of the technical benefits of active controls would increase return on investment and raise profits. Details of a proposed active controls research program are discussed.

Hood, R. V.↗