Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Low cost, surfactant-less, one pot synthesis of Cu{sub 2}O nano-octahedra at room temperature

Cu{sub 2}O octahedra were successfully synthesized via a novel wet-chemical method using D-glucose and hydrazine as reducing agent at room temperature without the presence of any other surfactant. Presence of D-glucose was important for the stabilization of the evolved copper octahedra and also for facilitating the reduction of the Cu(II) ions. The existence of glucose moieties on the surface as capping agent was confirmed by the FT-IR spectra while there was presence of excess oxygen atoms on the surface leading to the formation of a thin CuO layer at the octahedra surface, as confirmed by the XPS study, probably promoted by the capping glucose. Effect of NaOH concentration on the reaction and the formation of octahedra was also studied. The formation mechanism of obtained Cu{sub 2}O octahedra has been discussed. These octahedra were then studied for their photocatalytic properties in degradation of organic dyes, rhodamine B and methyl orange. - Graphical abstract: Cu{sub 2}O octahedra were found to have thin layer of CuO, due to oxidation of surface Cu{sup +} atoms by the surfactant O atoms. Highlights: > Simple and inexpensive one pot synthesis of various Cu{sub 2}O nanostructures. > Surface properties studied by XPS. > Used as photocatalysis for degradation of rhodamine B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic Layer Deposition of Ultrathin Nickel Sulfide Films and Preliminary Assessment of Their Performance as Hydrogen Evolution Catalysts

Transition metal sulfides reflect significant potential for applications ranging from catalysis to electrocatalysis to photovoltaics due to their high stability and conductivity. Nickel sulfide, particularly known for its ability to electrochemically reduce protons to hydrogen gas nearly as efficiently as expensive noble metals, can be challenging to produce with certain surface site compositions or morphologies, e.g., conformal thin films. To this end, we employed atomic layer deposition (ALD), a preeminent method to fabricate uniform and conformal films, to construct thin films of nickel sulfide (NiS x ) using bis( N , N '-di- tert -butylacetamidinato)nickel(II) (Ni(amd) 2 ) vapor and hydrogen sulfide gas. Effects of experimental conditions such as pulse and purge times and temperature on the growth of NiS x were investigated. These revealed a wide temperature range, 125–225 °C, over which self-limiting NiS x growth can be observed. In situ quartz crystal microbalance (QCM) studies revealed conventional linear growth behavior for NiS x films, with a growth rate of 9.3 ng/cm 2 per cycle being obtained. The ALD-synthesized films were characterized using X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) methods. To assess the electrocatalyitic activity of NiS x for evolution of molecular hydrogen, films were grown on conductive-glass supports. Overpotentials at a current density of 10 mA/cm 2 were recorded in both acidic and pH 7 phosphate buffer aqueous reaction media and found to be 440 and 576 mV, respectively, with very low NiS x loading. These findings hint at the promise of ALD-grown NiS x materials as water-compatible electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

570 mV photovoltage, stabilized n-Si/CoO x heterojunction photoanodes fabricated using atomic layer deposition

Heterojunction photoanodes, consisting of n-type crystalline Si(100) substrates coated with a thin ~50 nm film of cobalt oxide fabricated using atomic-layer deposition (ALD), exhibited photocurrent-onset potentials of -205 ± 20 mV relative to the formal potential for the oxygen-evolution reaction (OER), ideal regenerative solar-to-O 2 (g) conversion efficiencies of 1.42 ± 0.20%, and operated continuously for over 100 days (~2500 h) in 1.0 M KOH(aq) under simulated solar illumination. The ALD CoO x thin film: (i) formed a heterojunction with the n-Si(100) that provided a photovoltage of 575 mV under 1 Sun of simulated solar illumination; (ii) stabilized Si photoanodes that are otherwise unstable when operated in aqueous alkaline electrolytes; and, (iii) catalyzed the oxidation of water, thereby reducing the kinetic overpotential required for the reaction and increasing the overall efficiency relative to electrodes that do not have an inherently electrocatalytic coating. The process provides a simple, effective method for enabling the use of planar n-Si(100) substrates as efficient and durable photoanodes in fully integrated, photovoltaic-biased solar fuels generators.

14 SOLAR ENERGY↗

“Uncontrolled” Preparation of Disperse Poly(lactide)- block -poly(styrene)- block -poly(lactide) for Nanopatterning Applications

We report the facile synthesis of well-defined ABA poly(lactide)-block-poly(styrene)-block-poly(lactide) (LSL) triblock copolymers having a disperse poly(styrene) midblock (Ð = 1.27–2.24). The direct synthesis of telechelic α,ω-hydroxypoly(styrene) (HO-PS-OH) midblocks was achieved using a commercially available difunctional free radical diazo initiator 2,2'-azobis[2-methyl-N-(2-hydroxyethyl)propionamide]. Poly(lactide) (PLA) end blocks were subsequently grown from HO-PS-OH macroinitiators via ring-opening transesterification polymerization of (±)-lactide using the most common and prevalent catalyst system available, tin(II) 2-ethylhexanoate. Fourteen LSL triblock copolymers with total molar masses Mn,total = 24–181 kg/mol and PLA volume fractions fPLA = 0.15–0.68 were synthesized and thoroughly characterized. The self-assembly of symmetric triblocks was analyzed in the bulk using small-angle X-ray scattering and in thin films using grazing incidence small-angle X-ray scattering and atomic force microscopy. We demonstrate both the bulk and thin film self-assembly of LSL disperse triblocks gave well-organized nanostructures with uniform domain sizes suitable for nanopatterning applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic properties and bonding characteristics of AlN:Ag thin film nanocomposites

We present theoretical and experimental results on the bonding and structural characteristics of AlN:Ag thin film nanocomposites obtained by means of density functional theory (DFT) computations, high resolution transmission electron microscopy (HRTEM) observations, Auger electron spectroscopy (AES), and x-ray diffraction (XRD) measurements. From the theoretical calculations it was determined that the presence of the Ag substitutional of N or Al atoms affects the electronic density of states (EDOS) of the resulting systems. In particular, occupied energy states are introduced (between others) that lie within the energy gap of the AlN matrix due to Ag-d, Al-p (accompanied with a charge transfer from Al to Ag), Ag-p, and N-p hybridizations, respectively. The effect is predicted to be even more pronounced in the case of Ag nanoparticle inclusions affecting the EDOS of the composite system. These predictions were verified by the HRTEM images that gave unequivocal evidence for the presence and stability of Ag nanoparticles in the AlN matrix. In addition, the AES data suggested a metal-metal (Ag-Al) bonding preference, while the XRD patterns revealed that the atomic Ag dispersions in the AlN thin films results in a small elongation of the Wurtzite lattice, which is in agreement with the DFT predictions. These results may useful in tailoring the electronic response of AlN-based systems and the design of devices for various opto-electronic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

NEXAFS Depth Profiling of Surface Segregation in Block Copolymer Thin Films

NEXAFS spectroscopy was used to probe the surface composition and under-water surface reconstruction of thin films of comb-like diblock copolymers with cylindrical and spherical microphases. The polymers consisted of a polystyrene block, and a second block prepared from a styrenic monomer grafted with fluoroalkyl-tagged poly(ethylene glycol) side chains. Compositional depth profiling of the microphase separated block copolymer films, in the top 1-3 nm of the film, was performed to understand the role of block copolymer microstructure and self-assembly on surface composition. Using experimentally determined concentration profiles, the surface concentration of phenyl ring carbon atoms was quantified and compared with those of homopolymer and random copolymer controls. The carbon atoms from the relatively high surface energy phenyl groups were depleted or excluded from the surface, in favor of the low surface-energy fluoroalkyl groups. While it is expected that block copolymer surfaces will be completely covered by a wetting lamellar layer of the lower surface energy block, a significant amount of the higher surface energy polystyrene block was found to be present in the surface region of the cylinder-forming block copolymer. Evidently, the spontaneous formation of the cylindrical polystyrene microdomains in the near-surface region compensated for the lowering of the free energy that could have been achieved by completely covering the surfaces with a lamellar layer of the lower surface energy fluorinated block. All surfaces underwent molecular reconstruction after immersion in water. The experimental concentration depth profiles indicated an increased surface depletion of phenyl ring carbon atoms in the water-immersed thin films, due to the tendency of hydrophilic PEG side groups to be present at the polymer-water interface. Such a detailed characterization of the outermost layers of the block copolymer surfaces was possible because of the exceptional depth resolution of the NEXAFS depth profiling technique.

36 MATERIALS SCIENCE↗

Surface control of epitaxial manganite films via oxygen pressure

The trend to reduce device dimensions demands increasing attention to atomic-scale details of structure of thin films as well as to pathways to control it. We found that this is of special importance in the systems with multiple competing interactions. We have used in situ scanning tunneling microscopy to image surfaces of La 5/8 Ca 3/8 MnO 3 films grown by pulsed laser deposition. The atomically resolved imaging was combined with in situ angle-resolved X-ray photoelectron spectroscopy. We find a strong effect of the background oxygen pressure during deposition on structural and chemical features of the film surface. Deposition at 50 mTorr of O 2 leads to mixed-terminated film surfaces, with B-site (MnO 2 ) termination being structurally imperfect at the atomic scale. Moreover, a relatively small reduction of the oxygen pressure to 20 mTorr results in a dramatic change of the surface structure leading to a nearly perfectly ordered B-site terminated surface with only a small fraction of A-site (La,Ca)O termination. This is accompanied, however, by surface roughening at a mesoscopic length scale. The results suggest that oxygen has a strong link to the adatom mobility during growth. The effect of the oxygen pressure on dopant surface segregation is also pronounced: Ca surface segregation is decreased with oxygen pressure reduction.

42 ENGINEERING↗

Surface-Templated Assembly of Molecular Methanol on the Thin Film “29” Cu(111) Surface Oxide

Identifying and characterizing the atomic-scale interaction of methanol with oxidized Cu surfaces is of fundamental relevance to industrial reactions, such as methanol steam reforming and methanol synthesis. Here, we investigate the adsorption of methanol on the well-defined “29” Cu oxide surface, using a combination of experimental and theoretical techniques, and elucidate the atomic-scale interactions that lead to a unique spatial ordering of methanol on the oxide thin film. We determine that the methanol chain structures form first due to epitaxy with the underlying “29” oxide surface. Specifically, the geometry of the “29” oxide is such that there are spatially adjacent O δ – sites, in the form of O adatoms, and Cu δ+ species, within the Cu 2 O-like rings, which allow for methanol to simultaneously bond to the surface via an O methanol –Cu δ+ dative bond and an OH methanol –O δ – hydrogen bond. The methanol–oxide bond strength outweighs the strength of methanol–methanol hydrogen bonds on the “29” Cu oxide, unlike methanol assembly on bare coinage metal surfaces on which hydrogen bonding between adjacent molecules leads to ordered arrays. Weak, long-range interactions lead to the formation of chains of only even numbers of methanol molecules. Together, this work reveals that, unlike that on metal surfaces, the corrugation of the oxide surface drives methanol adsorption to preferred binding sites, preventing intermolecular hydrogen bonding and dictating the adsorption geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Secondary-electron imaging of bulk crystalline specimens in an aberration corrected $\text{STEM}$

Atomic-scale electron microscopy traditionally probes thin specimens, with thickness below 100 nm, and its feasibility for bulk samples has not been documented. Here in this study, we explore the practicality of scanning transmission electron microscope (STEM) imaging with secondary electrons (SE), using a silicon-wedge specimen having a maximum thickness of 18 μm. We find that the atomic structure is present in the entire thickness range of the SE images although the background intensity increases moderately with thickness. The consistent intensity of secondary electron (SE) images at atomic positions and the modest increase in intensity in between (background) observed in silicon suggest a limited contribution from SEs generated by backscattered electrons, a conclusion supported by our multislice calculations. We conclude that achieving atomic resolution in SE imaging for bulk specimens is indeed attainable using aberration-corrected STEM and that an aberration-corrected scanning electron microscope (SEM) may have the capacity for atomic-level resolution, holding great promise for future strides in materials research.

25 ENERGY STORAGE↗

175 MeV Au{sup +13} ion irradiation induced structural and morphological modifications in zinc oxide thin films

Thin films of ZnO were deposited, on Si substrates, using the RF-sputtering technique and irradiated by the 175 MeV Au{sup +13} beams. The structural changes were investigated by x-ray diffraction (XRD) measurements. The particle size found to increase with the increasing ion fluence up to 1 Multiplication-Sign 10{sup 12} ion/cm{sup 2}. At highest irradiation fluence of 5 Multiplication-Sign 10{sup 12} ion/cm{sup 2} the average particle size decreases. The Raman spectroscopy measurements were performed to understand the local phonon mode of the samples. The surface morphology of the as-deposited and irradiated thin films is measured by the Atomic Force Microscopy (AFM).

36 MATERIALS SCIENCE↗

Analysis of atomic force microscopy data for surface characterization using fuzzy logic

In this paper we present a methodology to characterize surface nanostructures of thin films. The methodology identifies and isolates nanostructures using Atomic Force Microscopy (AFM) data and extracts quantitative information, such as their size and shape. The fuzzy logic based methodology relies on a Fuzzy Inference Engine (FIE) to classify the data points as being top, bottom, uphill, or downhill. The resulting data sets are then further processed to extract quantitative information about the nanostructures. In the present work we introduce a mechanism which can consistently distinguish crowded surfaces from those with sparsely distributed structures and present an omni-directional search technique to improve the structural recognition accuracy. In order to demonstrate the effectiveness of our approach we present a case study which uses our approach to quantitatively identify particle sizes of two specimens each with a unique gold nanoparticle size distribution. - Research Highlights: {yields} A Fuzzy logic analysis technique capable of characterizing AFM images of thin films. {yields} The technique is applicable to different surfaces regardless of their densities. {yields} Fuzzy logic technique does not require manual adjustment of the algorithm parameters. {yields} The technique can quantitatively capture differences between surfaces. {yields} This technique yields more realistic structure boundaries compared to other methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photoelectron emission yield experiments on evolution of sub-gap states in amorphous In-Ga-Zn-O thin films with post deposition hydrogen treatment

Total photoyield emission spectroscopy (TPYS) was applied to study the evolution of sub-gap states in hydrogen-treated amorphous In-Ga-Zn-O (a-IGZO) thin films. The a-IGZO thin films were subjected to hydrogen radicals and subsequently annealed in ultra-high vacuum (UHV) conditions. A clear onset of the electron emission was observed at around 4.3 eV from the hydrogen-treated a-IGZO thin films. After successive UHV annealing at 300 °C, the onset in the TPYS spectra was shifted to 4.15 eV, and the photoelectron emission from the sub-gap states was decreased as the annealing temperature was increased. In conjunction with the results of thermal desorption spectrometer, it was deduced that the hydrogen atoms incorporated in the a-IGZO thin films induced metastable sub-gap states at around 4.3 eV from vacuum level just after the hydrogenation. It was also suggested that the defect configuration was changed due to the higher temperature UHV annealing, and that the hydrogen atoms desorbed with the involvement of Zn atoms. These experiments produced direct evidence to show the formation of sub-gap states as a result of hydrogen incorporation into the a-IGZO thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomically phase-matched second-harmonic generation in a 2D crystal

Second-harmonic generation (SHG) has found extensive applications from hand-held laser pointers to spectroscopic and microscopic techniques. Recently, some cleavable van der Waals (vdW) crystals have shown SHG arising from a single atomic layer, where the SH light elucidated important information such as the grain boundaries and electronic structure in these ultra-thin materials. However, despite the inversion asymmetry of the single layer, the typical crystal stacking restores inversion symmetry for even numbers of layers leading to an oscillatory SH response, drastically reducing the applicability of vdW crystals such as molybdenum disulfide (MoS 2 ). Here, we probe the SHG generated from the noncentrosymmetric 3R crystal phase of MoS 2 . We experimentally observed quadratic dependence of second-harmonic intensity on layer number as a result of atomically phase-matched nonlinear dipoles in layers of the 3R crystal that constructively interfere. By studying the layer evolution of the A and B excitonic transitions in 3R-MoS 2 using SHG spectroscopy, we also found distinct electronic structure differences arising from the crystal structure and the dramatic effect of symmetry and layer stacking on the nonlinear properties of these atomic crystals. The constructive nature of the SHG in this 2D crystal provides a platform to reliably develop atomically flat and controllably thin nonlinear media.

3R-MoS2↗

Synthesis, characterization and properties of yellow-light-emitting polyethers containing bis(styryl)anthracene units

Aromatic aliphatic polyethers containing bis(styryl)anthracene units in the main chain separated by flexible spacer of 11 (AND52) or 12 (AND53) methylene units, were synthesized and characterized aiming to be applied as emitting materials in polymer light emitting diode (PLED) devices. The polymers are soluble in common organic solvents and have average molecular weight of about 15kDa. Differentiations owing to an odd-even number of methylene units (χ=11 vs χ=12) are observed in their optical properties in solid state. Thin films as well as PLED devices were fabricated via conventional spin-coating process. Initially, various parameters have been investigated concerning the solubility of the polymers, the effect of film thickness on the electrical properties, and their thermal stability. The optical properties of the two polymers were investigated by NIR-Vis-far UV spectroscopic ellipsometry (SE). The accurate determination of the thickness and the optical constants (refractive index and dielectric function as a function of wavelength) were derived. These provide substantial insights into the final design of the optimum final multi-layer structure of the PLEDs, if we take into account that the external quantum efficiency (EQE) of electroluminescence (EL) strongly depends on the optical interference of the beams of emitted light that have been multiply reflected from the layer interfaces. The morphological characterization of the AND52 and AND53 polymeric thin films was carried out using atomic force microscopy (AFM), while current density-voltage (J-V) characteristics of the devices were studied by electrical measurements. The single PLED devices were switched on at relatively low operation voltages, showing the potential as backplanes for active matrix PLED applications. In this perspective, it can be assumed that further studies of the presented materials will enable the development of flexible PLEDs with the possibility to scale up their dimensions for bigger active area devices.

36 MATERIALS SCIENCE↗

Nonpolynomial Schroedinger equation for resonantly absorbing gratings

We derive a nonlinear Schroedinger equation with a radical term, {approx}{radical}(1-|V|{sup 2}), as an asymptotic model of the resonantly absorbing Bragg reflector (RABR), i.e., a periodic set of thin layers of two-level atoms, resonantly interacting with the electromagnetic field and inducing the Bragg reflection. A family of bright solitons is found, which splits into stable and unstable parts, exactly obeying the Vakhitov-Kolokolov criterion. The soliton with the largest amplitude, (|V|){sub max}=1, is a ''quasipeakon,'' i.e., a solution with a discontinuity of the third derivative at the center. Families of exact cnoidal waves, built as periodic chains of quasipeakons, are found too. The ultimate solution belonging to the family of dark solitons, with the background level V=1, is a dark compacton. Those bright solitons that are unstable destroy themselves (if perturbed) attaining the critical amplitude, |V|=1. The dynamics of the wave field around this critical point is studied analytically, revealing a switch of the system into an unstable phase, in terms of the RABR model. Collisions between bright solitons are investigated too. The collisions between fast solitons are quasielastic, while slowly moving ones merge into breathers, which may persist or perish (in the latter case, also by attaining |V|=1).

74 ATOMIC AND MOLECULAR PHYSICS↗

Oxygen-vacancy-induced room-temperature magnetization in lamellar V{sub 2}O{sub 5} thin films

In this work, we study the local atomic and electronic structures as well as oxygen-vacancy-induced magnetic properties of electrodeposited V{sub 2}O{sub 5} films. Unlike stoichiometric V{sub 2}O{sub 5}, which is a diamagnetic lamellar semiconductor, our oxygen-defective V{sub 2}O{sub 5} films are ferromagnetic at room-temperature and their saturation magnetization decreases with air exposure time. X-ray absorption spectroscopy was used to monitor the aging effect on these films, revealing that freshly-made samples exhibit only local crystalline order, whereas the aged ones undoubtedly show an enhancement of crystallinity and coordination symmetry. The mean number of oxygen atoms around V tends to increase, indicating a decrease of oxygen vacancies with time. Concurrently with the decrease of oxygen vacancies, a loss of saturation magnetization is also observed. Hence, it can be concluded that the ferromagnetism of the V{sub 2}O{sub 5} films originates from a vacancy-induced mechanism, confirming the universality of this class of ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Identification of a functional point defect in SrTi O 3

Unveiling both the presence and nature of point defects is one of the biggest challenges in condensed matter physics and materials science. Particularly in complex oxides, even a minute amount of unavoidable point defects could generate novel physical phenomena and functions, such as visible light emission and ferroelectricity, yet it remains elusive to clearly identify such point defects. Here, taking SrTiO3 as a model system, we show that iterative feedback among atomic-layer- and stoichiometry-controlled thin-film epitaxy, hybrid density functional theory, and high-resolution cathodoluminescence spectroscopy allows for the identification of a functional cationic defect, the Ti antisite (TiSr) defect. Our cathodoluminescence measurements reveal sub-band-gap luminescence, whose spectral fine structures show excellent quantitative agreement, as well as a one-to-one correspondence, with the theoretically predicted optical transitions from intrinsic point defects such as TiSr. Guided by the theory and spectroscopic results, we also control a cation stoichiometry, and it in turn results in good systematics in cathodoluminescence spectra. Not limited to the identification of TiSr, this approach allows for more reliable, self-consistent defect study, and provides critical insight into a microscopic picture of point defects in complex oxides.

Lee, Daesu↗

Automated Growth of Photocathodes [Slides]

Photocathode (alkali antimonides & tellurides) thin film growth state of the art remains largely an art of “cooking” instead of a controlled technological process. Our technology is a method of growing thin films by molecular beam deposition, that applies specifically to photoemissive films. We discovered that some of the photoemissive properties of Cs3Sb (easily measurable) strongly depend on the film’s stoichiometry (very difficult to measure, especially in real time). Such correlation allows to implement a feedback loop that adjusts the ratio of Cs and Sb fluxes in real time and thus maintains the same stoichiometric composition of the film during the whole growth cycle that may last for hours/days. Proposed scheme constitutes true, robust and versatile process control for the growth of alkali antimonide thin films.

36 MATERIALS SCIENCE↗