Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Industrial Gas Turbine Engine Catalytic Pilot Combustor-Prototype Testing

PCI has developed and demonstrated its Rich Catalytic Lean-burn (RCL®) technology for industrial and utility gas turbines to meet DOE's goals of low single digit emissions. The technology offers stable combustion with extended turndown allowing ultra-low emissions without the cost of exhaust after-treatment and further increasing overall efficiency (avoidance of after-treatment losses). The objective of the work was to develop and demonstrate emission benefits of the catalytic technology to meet strict emissions regulations. Two different applications of the RCL® concept were demonstrated: RCL® catalytic pilot and Full RCL®. The RCL® catalytic pilot was designed to replace the existing pilot (a typical source of high NOx production) in the existing Dry Low NOx (DLN) injector, providing benefit of catalytic combustion while minimizing engine modification. This report discusses the development and single injector and engine testing of a set of T70 injectors equipped with RCL® pilots for natural gas applications. The overall (catalytic pilot plus main injector) program NOx target of less than 5 ppm (corrected to 15% oxygen) was achieved in the T70 engine for the complete set of conditions with engine CO emissions less than 10 ppm. Combustor acoustics were low (at or below 0.1 psi RMS) during testing. The RCL® catalytic pilot supported engine startup and shutdown process without major modification of existing engine controls. During high pressure testing, the catalytic pilot showed no incidence of flashback or autoignition while operating over a wide range of flame temperatures. In applications where lower NOx production is required (i.e. less than 3 ppm), in parallel, a Full RCL® combustor was developed that replaces the existing DLN injector providing potential for maximum emissions reduction. This concept was tested at industrial gas turbine conditions in a Solar Turbines, Incorporated high-pressure (17 atm.) combustion rig and in a modified Solar Turbines, Incorporated Saturn engine rig. High pressure single-injector rig and modified engine rig tests demonstrated NOx less than 2 ppm and CO less than 10 ppm over a wide flame temperature operating regime with low combustion noise (<0.15% peak-to-peak). Minimum NOx for the optimized engine retrofit Full RCL® designs was less than 1 ppm with CO emissions less than 10 ppm. Durability testing of the substrate and catalyst material was successfully demonstrated at pressure and temperature showing long term stable performance of the catalytic reactor element. Stable performance of the reactor element was achieved when subjected to durability tests (>5000 hours) at simulated engine conditions (P=15 atm, Tin=400C/750F.). Cyclic tests simulating engine trips was also demonstrated for catalyst reliability. In addition to catalyst tests, substrate oxidation testing was also performed for downselected substrate candidates for over 25,000 hours. At the end of the program, an RCL® catalytic pilot system has been developed and demonstrated to produce NOx emissions of less than 3 ppm (corrected to 15% O2) for 100% and 50% load operation in a production engine operating on natural gas. In addition, a Full RCL® combustor has been designed and demonstrated less than 2 ppm NOx (with potential to achieve 1 ppm) in single injector and modified engine testing. The catalyst/substrate combination has been shown to be stable up to 5500 hrs in simulated engine conditions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Microscopic 3D Graphene for High-Performance Supercapacitors with Ultra-High Areal Capacitance

Despite graphene being considered as an ideal supercapacitor electrode material, its use in commercial devices is limited because few methods exist to produce high-quality graphene at large scale and low-cost. We report a simple method to synthesize 3D graphene by graphenization of coal tar pitch with a K2CO3 catalyst. This produces 3D graphenes with high specific surface areas up to 2113 m2 g-1 and exceptional crystallinity (Raman ID/IG as low as ~ 0.15). The material has an outstanding specific capacitance of 182.6 F g-1 at a current density of 1.0 A g-1. This occurs at mass loading of 30 mg cm-2 which is 3 times higher than commercial requirements, yielding an ultra-high areal capacitance of 5.48 F cm-2. Moreover, the K2CO3 is recycled and reused over 10 cycles. The synthesis method and resulting electrocapacitive performance properties create new opportunities for using 3D graphene more broadly in practical supercapacitor devices.

Pham, Viet Hung↗

Long-life high performance fuel cell program

A multihundred kilowatt Regenerative Fuel Cell for use in a space station is envisioned. Three 0.508 sq ft (471.9 cm) active area multicell stacks were assembled and endurance tested. The long term performance stability of the platinum on carbon catalyst configuration suitability of the lightweight graphite electrolyte reservoir plate, the stability of the free standing butyl bonded potassium titanate matrix structure, and the long life potential of a hybrid polysulfone cell edge frame construction were demonstrated. A 18,000 hour demonstration test of multicell stack to a continuous cyclical load profile was conducted. A total of 12,000 cycles was completed, confirming the ability of the alkaline fuel cell to operate to a load profile simulating Regenerative Fuel Cell operation. An orbiter production hydrogen recirculation pump employed in support of the cyclical load profile test completed 13,000 hours of maintenance free operation. Laboratory endurance tests demonstrated the suitability of the butyl bonded potassium matrix, perforated nickel foil electrode substrates, and carbon ribbed substrate anode for use in the alkaline fuel cell. Corrosion testing of materials at 250 F (121.1 C) in 42% wgt. potassium identified ceria, zirconia, strontium titanate, strontium zirconate and lithium cobaltate as candidate matrix materials.

Martin, R. E.↗

Dispersed bubble reactor for enhanced gas-liquid-solids contact and mass transfer

An apparatus to promote gas-liquid contact and facilitate enhanced mass transfer. The dispersed bubble reactor (DBR) operates in the dispersed bubble flow regime to selectively absorb gas phase constituents into the liquid phase. The dispersion is achieved by shearing the large inlet gas bubbles into fine bubbles with circulating liquid and additional pumped liquid solvent when necessary. The DBR is capable of handling precipitates that may form during absorption or fine catalysts that may be necessary to promote liquid phase reactions. The DBR can be configured with multistage counter current flow sections by inserting concentric cylindrical sections into the riser to facilitate annular flow. While the DBR can absorb CO.sub.2 in liquid solvents that may lead to precipitates at high loadings, it is equally capable of handling many different types of chemical processes involving solids (precipitates/catalysts) along with gas and liquid phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Ordered Mesoporous Oxides in Plasma-Assisted Ammonia Synthesis

Widespread implementation of dielectric barrier discharge (DBD)-assisted NH 3 synthesis, a nascent technology operating under sustainable, ambient conditions, is hindered by low energy yields due to, in part, poor fundamental understanding. Porous oxides used to support metal nanoparticle catalysts have shown significant energy yield contributions for DBD-assisted NH 3 synthesis even without metal. Using an AC-powered, coaxial, single-stage reactor at 16 kV with equimolar (N 2 /H 2 ) feed, we measured NH 3 synthesis rates in the presence of different nonordered oxides, ordered SiO 2 structures (SBA-15 and MCM-41), and ordered Al-incorporated analogues (γ-Al 2 O 3 -coated with varying Al-loadings and Al-substitution, respectively: Al 2 O 3 -SBA-15 and Al-MCM-41). We systematically quantified NH 3 energy yield dependence on pore structures and material identities (i.e., ordered pores and Al incorporation) known to facilitate higher DBD-assisted NH 3 synthesis rates. SBA-15 displayed a higher steady-state energy yield than MCM-41, indicating that framework type is a crucial factor, with both ordered porous systems outperforming fumed SiO 2 . 10 wt % Al maximized in situ NH 3 uptake among the various Al loadings, exhibiting a higher steady-state energy yield and similar power to SBA-15. However, Al-MCM-41 had a similar steady-state energy yield and lower power than MCM-41, likely due to the extended γ-Al 2 O 3 surface that has a dielectric constant higher than that of SiO 2 . Both Al-incorporated analogues benefit from surface acid sites that can adsorb NH 3 in situ, resulting in higher overall NH 3 energy yields than that of their parent ordered SiO 2 . Al 2 O 3 -SBA-15 shielded more NH 3 than Al-MCM-41, likely due to a higher acid site density than the acid site identity. Furthermore, Al incorporation via γ-Al 2 O 3 coating more successfully improves the NH 3 energy yield; together with the high-performing ordered framework, these analogues are potential metal catalyst supports with promising energy yields for DBD-assisted synthesis of NH 3 and other chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sulfur-doped graphene anchoring of ultrafine Au 25 nanoclusters for electrocatalysis

The biggest challenge of exploring the catalytic properties of under-coordinated nanoclusters is the issue of stability. We demonstrate herein that chemical dopants on sulfur-doped graphene (S-G) can be utilized to stabilize ultrafine (sub-2 nm) Au 25 (PET)18 clusters to enable stable nitrogen reduction reaction (NRR) without significant structural degradation. The Au 25 @S-G exhibits an ammonia yield rate of 27.5μgNH 3 ∙ mg Au -1 ∙ h -1 at -0.5 V with faradic efficiency of 2.3%. More importantly, the anchored clusters preserve ~ 80% NRR activity after four days of continuous operation, a significant improvement over the 15% remaining ammonia production rate for clusters loaded on undoped graphene tested under the same conditions. Isotope labeling experiments confirmed the ammonia was a direct reaction product of N 2 feeding gas instead of other chemical contaminations. Ex-situ X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy of post-reaction catalysts reveal that the sulfur dopant plays a critical role in stabilizing the chemical state and coordination environment of Au atoms in clusters. Further ReaxFF molecular dynamics (RMD) simulation confirmed the strong interaction between Au nanoclusters (NCs) and S-G. Furthermore, this substrate-anchoring process could serve as an effective strategy to study ultrafine nanoclusters’ electrocatalytic behavior while minimizing the destruction of the under-coordinated surface motif under harsh electrochemical reaction conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ionic Liquids as Novel Lubricants and /or Lubricant Additives

This ORNL-GM CRADA developed ionic liquids (ILs) as novel lubricants or oil additives for engine lubrication. A new group of oil-miscible ILs have been designed and synthesized with high thermal stability, non-corrosiveness, excellent wettability, and most importantly effective anti-scuffing/anti-wear and friction reduction characteristics. Mechanistic analysis attributes the superior lubricating performance of IL additives to their physical and chemical interactions with metallic surfaces. Working with a leading lubricant formulation company, the team has successfully developed a prototype low-viscosity engine oil using a phosphonium-phosphate IL as an anti-wear additive. Tribological bench tests of the IL-additized formulated oil showed 20-33% lower friction in mixed and elastohydrodynamic lubrication and 38-92% lower wear in boundary lubrication when compared with commercial Mobil 1 and Mobil Clean 5W-30 engine oils. High-temperature, high load (HTHL) full-size engine tests confirmed the excellent anti-wear performance for the IL-additized engine oil. Sequence VID engine dynamometer tests demonstrated an improved fuel economy by >2% for this IL-additized engine oil benchmarked against the Mobil 1 5W-30 oil. In addition, accelerated catalyst aging tests suggest that the IL additive may potentially have less adverse impact on three-way catalysts compared to the conventional ZDDP. Follow-on research is needed for further development and optimization of IL chemistry and oil formulation to fully meet ILSAC GF-5 specifications and further enhance the automotive engine efficiency and durability.

33 ADVANCED PROPULSION SYSTEMS↗

Particulate Emissions Control using Advanced Filter Systems: Final Report for Argonne National Laboratory, Corning Inc. and Hyundai Motor Company CRADA Project

This is a 3-way CRADA project working together with Corning, Inc. and Hyundai Motor Co. (HMC). The project is to understand particulate emissions from gasoline direct-injection engines (GDI) and their physico-chemical properties. In addition, this project focuses on providing fundamental information about filtration and regeneration mechanisms occurring in gasoline particulate filter (GPF) systems. For the work, Corning provides most advanced filter substrates for GPF applications and HMC provides three-way catalyst (TWC) coating services of these filter by way of a catalyst coating company. Then, Argonne National Laboratory characterizes fundamental behaviors of filtration and regeneration processes as well as evaluated TWC functionality for the coated filters. To examine aging impacts on TWC and GPF performance, the research team evaluates gaseous and particulate emissions as well as back-pressure increase with ash loading by using an engine-oil injection system to accelerate ash loading in TWC-coated GPFs.

42 ENGINEERING↗

Printed biofuel cells

Methods, systems, and devices are disclosed for implementing a biofuel cell device for extracting energy from a biofuel. In one aspect, a biofuel cell device includes a substrate, an anode including a catalyst to facilitate the conversion of a fuel in a biological fluid in an oxidative process that releases electrons captured at the anode, thereby extracting energy from the fuel substance, a cathode configured on the substrate adjacent to the anode and separated from the anode by a spacing region, and a load electrically coupled to the anode and cathode via electrical interconnects to obtain the extracted energy as electrical energy.

09 BIOMASS FUELS↗

Silver-Intermediated Perovskite La 0.9 FeO 3–δ toward High-Performance Cathode Catalysts for Nonaqueous Lithium–Oxygen Batteries

Development of efficient cathode catalysts is crucial for achieving high-performance rechargeable lithium–oxygen batteries. Herein, a simple one-step electrospun method was applied to obtain a silver-modified perovskite La 0.9 FeO 3–δ (Ag@LFO) as an efficient cathode catalyst. The synthesized catalyst has two characteristics: first, the doping of Ag led to a tailored electronic structure including the generation of Fe 4+ ; second, the in situ grown Ag exhibits a stronger interaction with perovskite. These two advantages result in high oxygen adsorbability and increased percentage of highly active oxygen species. Furthermore, film-like Li 2 O 2 was observed during discharge on the Ag@LFO cathode, which is beneficial for decomposition during recharge, whereas Li 2 O 2 generated on the LFO cathode was largely toroidal. Density functional theory calculations were used to discuss the Li 2 O 2 growth mechanism. As a result, compared to La 0.9 FeO 3–δ and post-loading silver-decorated La 0.9 FeO 3–δ (Ag/LFO), Ag@LFO exhibits lower overpotential, improved rate-capability, higher discharge specific capacity, and especially promoted cycling performance that is triple that of LFO.

25 ENERGY STORAGE↗

Tuning acidity in silica-overcoated oxides for hydroalkoxylation

Mixed oxides are ubiquitious solid acid catalysts for a number of transformations. Here, the chemistry of mixed oxide interfaces was experimentally probed by constructing model SiO 2 on MO x interfaces using a liquid-phase, stoichiometrically-controlled deposition of tetraethyl orthosilicate (TEOS). Catalytically active Brønsted sites were generated in four series of overcoated SiO 2 on metal oxide materials prepared by depositing TEOS onto Al 2 O 3 , anatase TiO 2 , Nb 2 O 5 , and ZrO 2 . Pyridine DRIFTS studies indicate that the acidity of deposited silanol groups was enhanced by interaction with the metal oxide surface, suggesting that pseudo-bridging silanol type structures were formed. Trimethylphosphine oxide (TMPO) 31 P NMR experiments showed that Brønsted acid strength varied in the overcoated materials, with increasing strength in the following order: SiO 2 /ZrO 2 < SiO 2 /TiO 2 < SiO 2 /Nb 2 O 5 < SiO 2 /Al 2 O 3 . This order correlated with the Lewis acidity and chemical hardness of the underlying metal oxides. The catalytic performance of the materials was evaluated in the liquid-phase hydroalkoxylation of dihydropyran with n-octanol, revealing that activity was highly dependent on SiO 2 loading, which impacted the density of acid sites, and scaled exponentially with Brønsted acid strength, determined by the core metal oxide identity. Brønsted acid strength appears to be the key driver of the materials’ activity, with the highest areal rate of 2.2 mmol / m 2 – h being measured over SiO 2 /Al 2 O 3 . Furthermore, this study shows that SiO 2 -overcoated materials are a systematically tunable class of catalysts that can be applied to acid catalyzed reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic co-aromatization of ethanol and methane

This study demonstrates the technical feasibility of simultaneously converting ethanol and methane into liquid hydrocarbons at mild reaction conditions (400 °C and 1 atm) over silver and/or zinc modified zeolite catalysts. After GC-MS analysis, it is worth noting that aromatics are the major compounds contained in the liquid product collected from the run when 1%Ag/ZSM-5, particularly after H 2 pretreatment, is charged. Compared to the performance exhibited from the run with pure HZSM-5 support engaged, Ag addition into the HZSM-5 framework favors aromatics formation, which might be closely associated with better Ag dispersion and more abundance of strong surface acidic sites where aromatization might take place while Zn loading exerts a detrimental effect on the production of aromatics but promotes the ether generation possibly through dehydration reaction. Referred to that from its N 2 counterpart, the increased aromatics formation of the collected liquid product when methane is present indicates that methane existence might facilitate ethanol aromatization. Moreover, combined with the increased carbon number in the formed aromatics from CH 4 run when H 2 run is referred and zero liquid formation from CH 4 -alone test as well as more prominent endothermic feature of methane run and more importantly the notably increased 13 C signals in 13 C NMR spectra of the liquid product collected during ethanol conversion under 13 CH 4 environment, all the observations suggest that methane might be activated nonoxidatively and converted into higher hydrocarbons, preferentially into aromatics if suitable catalyst is charged under the assistance of co-existing oxygenated hydrocarbon. Lastly, the reported synergetic effect could potentially lead to the more economic utilization of abundant natural gas and cellulosic ethanol.

09 BIOMASS FUELS↗

High-quality mesoporous graphene particles as high-energy and fast-charging anodes for lithium-ion batteries

The application of graphene for electrochemical energy storage has received tremendous attention; however, challenges remain in synthesis and other aspects. Here we report the synthesis of high-quality, nitrogen-doped, mesoporous graphene particles through chemical vapor deposition with magnesium-oxide particles as the catalyst and template. Such particles possess excellent structural and electrochemical stability, electronic and ionic conductivity, enabling their use as high-performance anodes with high reversible capacity, outstanding rate performance (e.g., 1,138 mA h g -1 at 0.2 C or 440 mA h g -1 at 60 C with a mass loading of 1 mg cm -2 ), and excellent cycling stability (e.g., >99% capacity retention for 500 cycles at 2 C with a mass loading of 1 mg cm -2 ). Interestingly, thick electrodes could be fabricated with high areal capacity and current density (e.g., 6.1 mA h cm -2 at 0.9 mA cm -2 ), providing an intriguing class of materials for lithium-ion batteries with high energy and power performance.

25 ENERGY STORAGE↗

Catalytic membrane reactor, methods of making the same and methods of using the same for dehydrogenation reactions

A catalytic membrane reactor and methods of operating and producing the same are provided that efficiently produces highly pure hydrogen (H2) from ammonia (NH3) as well as operates according to other chemical conversion processes. In one embodiment, a tubular ceramic support made from porous yttria-stabilized zirconia has an outer surface that is impregnated with a metal catalyst such as ruthenium and then plated with a hydrogen permeable membrane such as palladium. An inner surface of the ceramic support is impregnated with cesium to promote conversion of ammonia to hydrogen and nitrogen (N2). The resulting catalytic membrane reactor produces highly pure hydrogen at low temperatures and with less catalytic loading. Therefore, ammonia can be used to effectively transport hydrogen for use in, for example, fuel cells in a vehicle.

Way, James Douglas↗

Controlling reactivity of nanoporous catalyst materials by tuning reaction product-pore interior interactions: Statistical mechanical modeling

Statistical mechanical modeling is performed of a catalytic conversion reaction within a functionalized nanoporous material to assess the effect of varying the reaction product-pore interior interaction from attractive to repulsive. A strong enhancement in reactivity is observed not just due to the shift in reaction equilibrium towards completion but also due to enhanced transport within the pore resulting from reduced loading. The latter effect is strongest for highly restricted transport (single-file diffusion), and applies even for irreversible reactions. The analysis is performed utilizing a generalized hydrodynamic formulation of the reaction-diffusion equations which can reliably capture the complex interplay between reaction and restricted transport.

36 MATERIALS SCIENCE↗

Rocket Propulsion (RP) 21 Steering Committee Meeting - NASA Spacecraft Propulsion Update

Lander Tech is three separate but synergistic efforts: Lunar CATALYST (Lunar Cargo Transportation and Landing by Soft Touchdown) Support U.S. industry led robotic lunar lander development via three public-private efforts. Support U.S. industry led robotic lunar lander development via three public-private partnerships. Infuse or transfer landing technologies into these public private partnerships. Advanced Exploration Systems-Automated Propellant Loading (APL) -Integrated Ground Operations. Demonstrate LH2 zero loss storage, loading and transfer operations via testing on a large scale in a relevant launch vehicle servicing environment. (KSC, GRC). Game Changing Technology-20 Kelvin -20 Watt Cryocooler Development of a Reverse Turbo-Brayton Cryocooler operating at 20 Kelvin with 20 Watts of refrigeration lift.

Propellant↗

Engineering a Self-Grown TiO 2 /Ti-MOF Heterojunction with Selectively Anchored High-Density Pt Single-Atomic Cocatalysts for Efficient Visible-Light-Driven Hydrogen Evolution

A photocatalyst TiO 2 /Ti-BPDC-Pt is developed with a self-grown TiO 2 /Ti-metal–organic framework (MOF) heterojunction, i.e., TiO 2 /Ti-BPDC, and selectively anchored high-density Pt single-atomic cocatalysts on Ti-BPDC for photocatalytic hydrogen evolution. This intimate heterojunction, growing from the surface pyrolytic reconstruction of Ti-BPDC, works in a direct Z-scheme, efficiently separating electrons and holes. Pt is selectively anchored on Ti-BPDC by ligands and is found in the form of single atoms with loading up to 1.8 wt %. The selective location of Pt is the electron-enriched domain of the heterojunction, which further enhances the utilization of the separated electrons. This tailored TiO 2 /Ti-BPDC-Pt shows a significantly enhanced activity of 12.4 mmol g -1 h -1 compared to other TiO 2 - or MOF-based catalysts. In conclusion, the structure-activity relationship further proves the balance of two simultaneously exposed domains of heterojunctions is critical to fulfilling this kind of catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗