Search NASA⌕ Search

SEARCH · Search NASA

Results for “comparative modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Comparative analysis of the effects of electron and hole capture on the power characteristics of a semiconductor quantum-well laser

The operating characteristics of a semiconductor quantum-well laser calculated using three models are compared. These models are (i) a model not taking into account differences between the electron and hole parameters and using the electron parameters for both types of charge carriers; (ii) a model, which does not take into account differences between the electron and hole parameters and uses the hole parameters for both types of charge carriers; and (iii) a model taking into account the asymmetry between the electron and hole parameters. It is shown that, at the same velocity of electron and hole capture into an unoccupied quantum well, the laser characteristics, obtained using the three models, differ considerably. These differences are due to a difference between the filling of the electron and hole subbands in a quantum well. The electron subband is more occupied than the hole subband. As a result, at the same velocities of electron and hole capture into an empty quantum well, the effective electron-capture velocity is lower than the effective hole-capture velocity. Specifically, it is shown that for the laser structure studied the hole-capture velocity of 5 × 10{sup 5} cm/s into an empty quantum well and the corresponding electron-capture velocity of 3 × 10{sup 6} cm/s into an empty quantum well describe the rapid capture of these carriers, at which the light–current characteristic of the laser remains virtually linear up to high pump-current densities. However, an electron-capture velocity of 5 × 10{sup 5} cm/s and a corresponding hole-capture velocity of 8.4 × 10{sup 4} cm/s describe the slow capture of these carriers, causing significant sublinearity in the light–current characteristic.

36 MATERIALS SCIENCE↗

The motions of clusters and group of galaxies

The distributions of peculiar velocities of rich clusters and of groups of galaxies are investigated for different cosmological models and are compared with observations. Four cosmological models are studied: standard cold dark matter (CDM) (omega = 1); low-density CDM (omega = 0.3); hot dark matter (HDM) (omega = 1); and primeval baryonic isocurvature (PBI) (omega = 0.3). All models are normalized to the microwave background fluctuations observed by Cosmic Background Explorer (COBE). We find that rich clusters of galaxies exhibit a Maxwellian distribution of peculiar velocities in all models, as expected from a Gaussian initial density field. The clusters appear to be fundamental and efficient tracers of the large-scale velocity field. The cluster three-dimensional velocity distribution typically peaks at v approximately 600 km/s and extends to high cluster velocities of v approximately 2000 km/s. The low-density CDM model exhibits somewhat lower velocities: it peaks at approximately 400 km/s and extends to approximately 1200 km/s. Approximately 10% (approximately 1% for low-density CDM) of all model rich clusters move with high peculiar velocities of V greater than or = 10(exp 3) km/s. The highest velocity clusters frequently originate in dense superclusters. The model velocity distributions of rich clusters are compared with the model velocity distributions of small groups of galaxies, and of the total matter. The group velocity distribution is, in general, similar to the velocity distribution of the rich clusters. The matter velocity distribution is similar to that of the rich clusters for the omega = 0.3 models; these models exhibit Maxwellian velocity distributions for clusters, for groups, and for matter that are all similar to one another. The mass distribution in the omega = 1 models, however, exhibits a longer tail of high velocities than do the clusters. This high-velocity tail originates mostly from the high velocities that exist within rich clusters. The model velocity distributions of groups and clusters of galaxies are compared with observations. The data exhibit a larger high-velocity tail, to v(sub r) greater than or = 2000 km/s, than is seen in the model simulations (except for HDM). Because of the large observational uncertainties, however, the data are consistent at a approximately 1-3 sigma level with the model predictions and with a Gaussian initial density field. Accurate observations of cluster peculiar velocities, especially at the high-velocity tail, shoud provide powerful constraints on the cosmological models.

Bahcall, Neta A.↗

Fully‐Printed Ion Sensor Arrays for Measuring Agricultural Nitrogen and Potassium Concentrations Using Nernstian and AI Models

Abstract The chemical composition of growing media is a key factor for plant growth, impacting agricultural yield and sustainability. However, there is a lack of affordable chemical sensors for ubiquitous nutrient ion monitoring in agricultural applications. This work investigates using fully printed ion‐sensor arrays to measure the concentrations of nitrate, ammonium, and potassium in mixed‐electrolyte media. Ion sensor arrays composed of nitrate, ammonium, and potassium ion‐selective electrodes and a printed silver‐silver chloride (Ag/AgCl) reference electrode are fabricated and characterized in aqueous solutions in a range of concentrations that encompass what is typical for agricultural growing media (0.01 m m –1 m ). The sensors are also tested in mixed‐electrolyte solutions of NaNO 3 , NH 4 Cl, and KCl of varying concentrations, and the recorded potentials are input into Nernstian and artificial neural network models to compare the prediction accuracy of the models against ground truth. The artificial neural network models demonstrated higher accuracy over the Nernstian model, and the model using only ion‐sensor inputs is 7.5% more accurate than the Nernstian model under the same conditions. By enabling more precise and efficient fertilizer application, these sensor arrays coupled to computational models can help increase crop yields, optimize resource use, and reduce environmental impact.

Goodrich, Payton [University of California Berkele↗

Estimation of hydraulic conductivity in a watershed using sparse multi-source data via Gaussian process regression and Bayesian experimental design

Enhanced water management systems depend on accurate estimation of subsurface hydraulic properties. However, geologic formations can vary significantly, so information from a single source (e.g., widely spaced boreholes) is insufficient in characterizing subsurface aquifer properties. Therefore, multiple sources of information are needed to complement the hydrogeology understanding of a region. Here, this study presents a numerical framework in which information from different measurement sources is combined to characterize the 3D random field in a multi-fidelity prediction model. Coupled with the model, a Bayesian experimental design was used to determine the best future sampling locations. The Upper Sangamon watershed in east-central Illinois was selected as the case study site, where the multi-fidelity Gaussian process model was used to estimate the hydraulic conductivity in the region of interest. Multi-source observation data were obtained from electrical resistivity and borehole pumping tests. The accuracy of the model prediction is dependent on the locations and the distribution of both high- and low-fidelity data. Furthermore, the multi-fidelity model was compared with the single-fidelity model. The uncertainties and confidence in the measurements and parameter estimates were quantified and used to design future cycles of data collection to further improve the confidence intervals.

54 ENVIRONMENTAL SCIENCES↗

Operator inference for non-intrusive model reduction of systems with non-polynomial nonlinear terms

Here in this work we present a non-intrusive model reduction method to learn low-dimensional models of dynamical systems with non-polynomial nonlinear terms that are spatially local and that are given in analytic form. In contrast to state-of-the-art model reduction methods that are intrusive and thus require full knowledge of the governing equations and the operators of a full model of the discretized dynamical system, the proposed approach requires only the non-polynomial terms in analytic form and learns the rest of the dynamics from snapshots computed with a potentially black-box full-model solver. The proposed method learns operators for the linear and polynomially nonlinear dynamics via a least-squares problem, where the given non-polynomial terms are incorporated on the right-hand side. The least-squares problem is linear and thus can be solved efficiently in practice. The proposed method is demonstrated on three problems governed by partial differential equations, namely the diffusion–reaction Chafee–Infante model, a tubular reactor model for reactive flows, and a batch-chromatography model that describes a chemical separation process. The numerical results provide evidence that the proposed approach learns reduced models that achieve comparable accuracy as models constructed with state-of-the-art intrusive model reduction methods that require full knowledge of the governing equations.

42 ENGINEERING↗

Mechanisms of radiation-induced segregation around He bubbles in a Fe-Cr-Ni crystal

We report that Fe-15Cr-15Ni (wt.%) austenitic stainless steel was irradiated with 200 keV 4 He + ions to a fluence of 5 × 10 16 /cm 2 at 500 °C. Radiation-induced segregation (RIS) at He bubbles in the irradiated steel was measured using Energy Dispersive X-ray Spectroscopy (EDS) coupled with Scanning Transmission Electron Microscopy (STEM). The RIS measurements exhibited an enrichment of Ni and a depletion of Cr and Fe at the bubbles. To determine the underlying mechanisms of the RIS, the prediction of the Marwick model was compared with the RIS measurements. The model with parametric input in accordance with the Inverse Kirkendall effect (IKE), i.e. a preferential flux of elements associated with vacancy flux, was inadequate in explaining the observed amount of segregation of Fe, Cr and Ni. More specifically, a considerably lower ratio of the concentration gradient between Cr and Fe, $\left(\frac{∇Cr}{∇Fe}\right)$, of 0.53 was obtained from the RIS measurements versus the model-predicted value of 2.3, indicating an overestimation of Cr depletion at the bubbles by the Marwick model. To explain this difference between the model prediction and the RIS measurements, in addition to the Cr depletion at the bubbles by IKE due to the fastest diffusion via vacancy flux, a preferential interstitial flux of Cr from the matrix to the bubbles is discussed as a possible concurrently operating mechanism.

36 MATERIALS SCIENCE↗

Impact of Precipitation Parameters on the Specific Surface Area of PuO 2

Controlling the properties of PuO 2 through processing is of vital importance to environmental transport and fate, production of nuclear fuels, nuclear forensic analyses, stockpile stewardship, and storage of nuclear wastes applications. A number of processing conditions have been identified to control final product properties, including specific surface area (SSA), residual carbon content, adsorption of volatile species, morphology, and particle size. In this paper, a novel approach is developed for the prediction of PuO 2 SSA via the synthetic route of Pu(IV) oxalate precipitation followed by calcination. The proposed model utilizes multivariate regression methodology and leave one out formalism to link Savannah River Site (SRS) precipitation and calcination production data to the SSA of the final product. A comparison among the models provides insight into the accuracy and ability to identify variations amongst the processing data. Additionally, the models may also be used to fit new data outside of the parameters explored in a production facility. Finally, the trained model was compared to a similarly trained conventional model form to illustrate the influence of precipitation parameters on the prediction of the final SSA. The models presented here attempt to provide new methods for more accurate prediction of the PuO 2 product properties in a production scale environment for key environmental and nuclear applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Physics informed neural network can retrieve rate and state friction parameters from acoustic monitoring of laboratory stick-slip experiments

Various machine learning (ML) and deep learning (DL) techniques have been recently applied to the forecasting of laboratory earthquakes from friction experiments. The magnitude and timing of shear failures in stick-slip cycles are predicted using features extracted from the recorded ultrasonic or acoustic emission (AE) signals. In addition, the Rate and State Friction (RSF) constitutive laws are extensively used to model the frictional behavior of faults. In this work, we use data from shear experiments coupled with passive acoustic (variance, kurtosis, and AE rate) interleaved with active source ultrasonic monitoring (transmitted wave amplitude) to develop physics-informed neural network (PINN) models incorporating the RSF law and AE rate generation equation with wave amplitude serving as a proxy for friction state variable. This PINN framework allows learning RSF parameters from stick-slip experiments rather than measuring them through a series of velocity step experiments. We observe that when the stick-slip cycles are irregular, the PINN models outperform the data-driven DL models. Transfer learning (TL) PINN models are also developed by pre-training on data collected at one normal stress level followed by forecasting shear failures and retrieving RSF parameters at other stress levels (i.e., with different recurrence intervals) after retraining on a limited amount of new data. Our findings suggest that TL models perform better compared to standalone models. Both standalone and TL PINN-estimated RSF parameters and their ground truth values show excellent agreements thus demonstrating that RSF parameters can be retrieved from laboratory stick-slip experiments using the corresponding acoustic data and that the transmitted wave amplitude provides a good representation of the evolving frictional state during stick-slips.

58 GEOSCIENCES↗

Modeling of the plasma generated in a rarefied hypersonic shock layer

In this study, a rigorous numerical model is developed to simulate the plasma generated in a rarefied, hypersonic shock layer. The model uses the direct simulation Monte Carlo (DSMC) method to treat the particle collisions and the particle-in-cell (PIC) method to simulate the plasma dynamics in a self-consistent manner. The model is applied to compute the flow along the stagnation streamline in front of a blunt body reentering the Earth's atmosphere at very high velocity. Results from the rigorous DSMC-PIC model are compared directly to the standard DSMC modeling approach that uses the ambipolar diffusion approximation to simulate the plasma dynamics. It is demonstrated that the self-consistent computation of the plasma dynamics using the rigorous DSMC-PIC model captures many physical phenomena not accurately predicted by the standard modeling approach. These computations represent the first assessment of the validity of the ambipolar diffusion approximation when predicting the rarefied plasma generated in a hypersonic shock layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Equations of State for Hadronic and Quarkionic Stars

In the present work, equations of state used to describe hadronic and quarkionic stars are revisited. Although the calculations involved are well known, a systematic comparison has not been done yet. For hadronic matter the non-linear Walecka model is used and for quarkionic matter, we use the MIT bag model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermodynamics of 5D dilaton-gravity

We calculate the free energy, spatial string tension and Polyakov loop of the gluon plasma using the dilaton potential of Ref. [1] in the dilaton-gravity theory of AdS/QCD. The free energy is computed from the Black Hole solutions of the Einstein equations in two ways: first, from the Bekenstein-Hawking proportionality of the entropy with the area of the horizon, and secondly from the Page-Hawking computation of the free energy. The finite temperature behaviour of the spatial string tension and Polyakov loop follow from the corresponding string theory in AdS{sub 5}. Comparison with lattice data is made.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Clustering effects for explaining an anomalous JLab result on the {sup 9}Be structure function

An anomalous nuclear modification was reported by JLab measurements on the beryllium-9 structure function F{sub 2}. It is unexpected in the sense that a nuclear modification slope is too large to be expected from its average nuclear density. We investigated whether it is explained by a nuclear clustering configuration in {sup 9}Be with two {alpha} nuclei and surrounding neutron clouds. Such clustering aspects are studied by using antisymmetrized molecular dynamics (AMD) and also by a simple shell model for comparison. We consider that nuclear structure functions F{sub 2}{sup A} consist of a mean conventional part and a remaining one depending on the maximum local density. The first mean part does not show a significant cluster effect on F{sub 2}. However, we propose that the remaining one could explain the anomalous JLab slope, and it is associated with high densities created by the cluster formation in {sup 9}Be. The JLab measurement is possibly the first signature of clustering effects in high-energy nuclear reactions. A responsible physics could be an internal nucleon modification, which is caused by the high densities due to the cluster configuration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Two-Color PNJL Model and Equation of State of Hadrons at Finite Temperature and Density

We derive hadronic chiral Lagrangian from PNJL model by using bosonization method. Bosonization is based on path integral, quark fields are integrated out by introducing the auxiliary fields. By its nature, this method is difficult to apply the problem of three bodies, but it is stand up for two-bodies. Hence this method usually have been applied meson theory. We attempt bosonization to be enlarged including baryon in two-color scheme. The obtained model which has chiral symmetry and quark confinement property apply to finite temperature and density, and find out the thermodynamical property. We make a comparison with lattice QCD sumilation in two-color at finite density.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of pedestal height and internal transport barriers on International Thermonuclear Experimental Reactor target steady state simulations

The Tokamak simulation code (TSC) is used to provide initial conditions for predictive TRANSPort and integrated modeling code (PTRANSP) simulations of ITER target steady state scenarios. The PTRANSP simulations are carried out using the new multi-mode (MMM7.1) and the gyro-Landau-fluid (GLF23) transport models. It is found that there are circumstances under which the total fusion power decreases with increasing pedestal temperature height. When the total current (from magnetic axis to plasma edge) is fixed, an increased fraction of the current is concentrated in the pedestal region as the pedestal height is increased. As a consequence of the fixed total current, this results a smaller fraction of the current in the core plasma and, consequently, lower energy confinement. In previous simulations of ITER, in which the fusion power increased with increasing pedestal temperature height, the plasma current from the top of the pedestal to the magnetic axis was held fixed independent of the pedestal temperature. Simulations presented in this paper also indicate that improvement in fusion power production occurs when the lower hybrid current drive is replaced with electron cyclotron current drive. Again, the improvement results from the redistribution of plasma current since the lower hybrid power generally drives current closer to the plasma edge than does the electron cyclotron power. ITER simulation results obtained using the MMM7.1 transport model are compared with those using the GLF23 model. It is found that, in simulations of target steady state scenarios, momentum transport and flow-shear suppression features of the new MMM7.1 model can lead to predictions of internal transport barriers in temperature and rotation frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular model of J-aggregated pseudoisocyanine fibers

Aggregated cyanines form ordered supramolecular structures with the potential to transport energy efficiently over long distances, a hallmark of photosynthetic light-harvesting complexes. In concentrated aqueous solution, pseudoisocyanine (PIC) spontaneously forms fibers with a chiral J-band red-shifted 1600 cm -1 from the monomeric 0–0 transition. A cryogenic transmission electron microscopy analysis of these fibers show an average fiber width of 2.89 nm, although the molecular-level structure of the aggregate is currently unknown. To determine a molecular model for these PIC fibers, the calculated spectra and dynamics using a Frenkel exciton model are compared to experiment. A chiral aggregate model in which the PIC monomers are neither parallel nor orthogonal to the long axis of the fiber is shown to replicate the experimental spectra most closely. This model can be physically realized by the sequential binding of PIC dimers and monomers to the ends of the fiber. Furthermore, these insights into the molecular aggregation model for aqueous PIC can also be applied to other similar cyanine-based supramolecular complexes with the potential for long-range energy transport, a key building block for the rational design of novel excitonic systems

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Noise-specific beating in the higher-level Ramsey curves of a transmon qubit

We report: in the higher levels of superconducting transmon devices and more generally charge sensitive devices, T 2 * measurements made in the presence of low-frequency time-correlated 1/f charge noise and quasiparticle-induced parity flips can give an underestimation of the total dephasing time. The charge variations manifest as beating patterns observed in the overlay of several Ramsey fringe curves and are reproduced with a phenomenological Ramsey curve model, which accounts for the charge variations. T 2 * dephasing times, which more accurately represent the total dephasing time, are obtained. The phenomenological model is compared with a Lindblad master equation model. Both models are found to be in agreement with one another and the experimental data. Finally, the phenomenological formulation enables a simple method in which the power spectral density for the low-frequency noise can be inferred from the overlay of several Ramsey curves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

COMPARISON OF ALPHA-ELEMENT-ENHANCED SIMPLE STELLAR POPULATION MODELS WITH MILKY WAY GLOBULAR CLUSTERS

We present simple stellar population (SSP) models with scaled-solar and {alpha}-element-enhanced abundances. The SSP models are based on the Dartmouth Stellar Evolution Database, our library of synthetic stellar spectra, and a detailed systematic variation of horizontal-branch (HB) morphology with age and metallicity. In order to test the relative importance of a variety of SSP model ingredients, we compare our SSP models with integrated spectra of 41 Milky Way globular clusters (MWGCs) from Schiavon et al. Using the Mg b and Ca4227 indices, we confirm that Mg and Ca are enhanced by about +0.4 and +0.2 dex, respectively, in agreement with results from high-resolution spectra of individual stars in MWGCs. Balmer lines, particularly H{gamma} and H{delta}, of MWGCs are reproduced by our {alpha}-enhanced SSP models not only because of the combination of isochrone and spectral effects but also because of our reasonable HB treatment. Moreover, it is shown that the Mg abundance significantly influences Balmer and iron line indices. Finally, the investigation of power-law initial mass function (IMF) variations suggests that an IMF much shallower than Salpeter is unrealistic because the Balmer lines are too strong on the metal-poor side to be compatible with observations.

79 ASTRONOMY AND ASTROPHYSICS↗

THEORETICAL SPECTRA OF THE AM CANUM VENATICORUM BINARY SYSTEM SDSS J0926+3624: EFFECTS OF IRRADIATION ONTO THE DONOR STAR

Taking into account a range of parameters determined from evolutionary models and available observational data, the detailed non-LTE spectrum for the primary star and the irradiated donor star in the AM Canum Venaticorum system SDSS J0926+3624 are constructed based on the TLUSTY stellar atmosphere code. The combined spectrum of the primary and the donor stars along with a multicolor blackbody spectrum of the accretion disk that reproduces a detailed numerical model is compared to the Sloan Digital Sky Survey optical spectrum of the system. The photometric flux of the primary star inferred from eclipse observations is compared with the synthetic spectrum. The model fit of the two independent observations provides an upper limit on the distance of the system for different effective temperatures of the primary. In addition, an upper limit on the combined flux of the disk and the donor in the infrared region wherein the contribution of the primary is negligible is also determined. It is shown that the spectrum of a sufficiently cool donor can exhibit emission lines due to irradiation from a hot primary and the emission features should be detectable in the infrared even though the contribution of the flux from the disk dominates. Thus, it is pointed out that infrared observations of the system would provide important information on the thermal state of the donor as well as useful insight into the thermal properties of the primary star and the accretion disk.

79 ASTRONOMY AND ASTROPHYSICS↗