Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrocatalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Effect of Chloride Anions on the Synthesis and Enhanced Catalytic Activity of Silver Nanocoral Electrodes for CO 2 Electroreduction

Metallic silver (Ag) is known as an efficient electrocatalyst for the conversion of carbon dioxide (CO 2 ) to carbon monoxide (CO) in aqueous or nonaqueous electrolytes. However, polycrystalline silver electrocatalysts require significant overpotentials in order to achieve high selectivity toward CO 2 reduction, as compared to the side reaction of hydrogen evolution. Here we report a high-surface-area Ag nanocoral catalyst, fabricated by an oxidation–reduction method in the presence of chloride anions in an aqueous medium, for the electro-reduction of CO 2 to CO with a current efficiency of 95% at the low overpotential of 0.37 V and the current density of 2 mA cm –2 . A lower limit of TOF of 0.4 s –1 and TON > 8.8 × 10 4 (over 72 h) was estimated for the Ag nanocoral catalyst at an overpotential of 0.49 V. The Ag nanocoral catalyst demonstrated a 32-fold enhancement in surface-area-normalized activity, at an overpotential of 0.49 V, as compared to Ag foil. We found that, in addition to the effect on nanomorphology, the adsorbed chloride anions play a critical role in the observed enhanced activity and selectivity of the Ag nanocoral electrocatalyst toward CO 2 reduction. Synchrotron X-ray photoelectron spectroscopy (XPS) studies along with a series of control experiments suggest that the chloride anions, remaining adsorbed on the catalyst surface under electrocatalytic conditions, can effectively inhibit the side reaction of hydrogen evolution and enhance the catalytic performance for CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Standards and Protocols for Data Acquisition and Reporting for Studies of the Electrochemical Reduction of Carbon Dioxide

Objective evaluation of the performance of electrocatalysts for CO 2 reduction has been complicated by a lack of standardized methods for measuring and reporting activity data. In this perspective, we advocate that standardizing these practices can aid in advancing research efforts toward the development of efficient and selective CO 2 reduction electrocatalysts. Using information taken from experimental studies, we identify variables that influence the measured activity of CO 2 reduction electrocatalysts and propose procedures to account for these variables in order to improve the accuracy and reproducibility of reported data. We recommend that catalysts be measured under conditions which do not introduce artifacts from impurities, from either the electrolyte or counter electrode, and advocate the acquisition of data measured in the absence of mass transport effects. Furthermore, measured rates of electrochemical reactions should be normalized to both the geometric electrode area as well as the electrochemically active surface area to facilitate the comparison of reported catalysts with those previously known. We demonstrate that, when these factors are accounted for, the CO 2 reduction activities of Ag and Cu measured in different laboratories exhibit little difference. Furthermore, adoption of the recommendations presented in this perspective would greatly facilitate the identification of superior catalysts for CO 2 reduction arising solely from changes in their composition and pretreatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rh and Rh Alloy Nanoparticles as Highly Active H 2 Oxidation Catalysts for Alkaline Fuel Cells

When moving from acidic to alkaline media, non-Pt-group metal catalysts can be used as the oxygen reduction catalyst, because of their high activity and stability. However, in alkaline electrolytes, we meet another challenge: slower H 2 oxidation kinetics on platinum group metals, relative to acidic electrolytes. We require new robust anode catalysts to enhance H 2 oxidation kinetics in alkaline anion exchange membrane fuel cells (AEMFCs). In this Letter, carbon-supported Rh and Rh alloy nanoparticles such as Pt 7 Rh 3 /C, Ir 9 Rh 1 /C, Rh 9 Ru 1 /C and Rh 9 Pd 1 /C were found to be highly active hydrogen oxidation and evolution catalysts in alkaline media. A size effect was observed for Rh/C, i.e., the hydrogen oxidation reaction (HOR) activity significantly increased on Rh nanoparticles, relative to bulk Rh. A synergistic effect was noted for the hydrogen oxidation on PtRh and IrRh alloy catalysts. These Rh and Rh alloy nanoparticles outperformed Ir/C and Pt/C as electrocatalysts. In particular, Rh/C with an average particle size of ca. 2 nm was identified to be the best HOR catalyst among all catalysts studied, in terms of its mass activity, while Pt 7 Rh 3 /C outperformed other studied catalysts, in terms of its specific activity and exchange current density. Ir9Rh1/C was found to be the most effective electrocatalyst among all studied Ir alloy nanoparticles. These Rh and Rh alloy catalysts could be employed as highly active H 2 electrocatalysts in anion exchange membrane fuel cells.

25 ENERGY STORAGE↗

How the Bioinspired Fe 2 Mo 6 S 8 Chevrel Breaks Electrocatalytic Nitrogen Reduction Scaling Relations

The nitrogen reduction reaction (NRR) is a renewable alternative to the energy- and CO 2 -intensive Haber–Bosch NH 3 synthesis process but is severely limited by the low activity and selectivity of studied electrocatalysts. The Chevrel phase Fe 2 Mo 6 S 8 has a surface Fe–S–Mo coordination environment that mimics the nitrogenase FeMo-cofactor and was recently shown to provide state-of-the-art activity and selectivity for NRR. Here, we elucidate the previously unknown NRR mechanism on Fe 2 Mo 6 S 8 via grand-canonical density functional theory (GC-DFT) that realistically models solvated and biased surfaces. Fe sites of Fe 2 Mo 6 S 8 selectively stabilize the key *NNH intermediate via a narrow band of free-atom-like surface d-states that selectively hybridize with p-states of *NNH, which results in Fe sites breaking NRR scaling relationships. These sharp d-states arise from an Fe–S bond dissociation during N 2 adsorption that mimics the mechanism of the nitrogenase FeMo-cofactor. Furthermore, we developed a new GC-DFT-based approach for calculating transition states as a function of bias (GC-NEB) and applied it to produce a microkinetic model for NRR at Fe 2 Mo 6 S 8 that predicts high activity and selectivity, in close agreement with experiments. Furthermore, our results suggest new design principles that may identify effective NRR electrocatalysts that minimize the barriers for *N 2 protonation and *NH 3 desorption and that may be broadly applied to the rational discovery of stable, multinary electrocatalysts for other reactions where narrow bands of surface d-states can be tuned to selectively stabilize key reaction intermediates and guide selectivity toward a target product. Furthermore, our results highlight the importance of using GC-DFT and GC-NEB to accurately model electrocatalytic reactions.

10 SYNTHETIC FUELS↗

Proton Relay for the Rate Enhancement of Electrochemical Hydrogen Reactions at Heterogeneous Interfaces

Proton transfer is critically important to many electrocatalytic reactions, and directed proton delivery could open new avenues for the design of electrocatalysts. However, although this approach has been successful in molecular electrocatalysis, proton transfer has not received the same attention in heterogeneous electrocatalyst design. Here, in this work, we report that a metal oxide proton relay can be built within heterogeneous electrocatalyst architectures and improves the kinetics of electrochemical hydrogen evolution and oxidation reactions. The volcano-type relationship between activity enhancement and pK a of amine additives confirms this improvement; we observe maximum rate enhancement when the pK a of a proton relay matches the pH of the electrolyte solution. Density-functional-theory-based reactivity studies reveal a decreased proton transfer energy barrier with a metal oxide proton relay. These findings demonstrate the possibility of controlling the proton delivery and enhancing the reaction kinetics by tuning the chemical properties and structures at heterogeneous interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando Characterization of Fe in Doped Ni x (Fe 1– x )O y H z Catalysts for Electrochemical Oxygen Evolution

Iron-doped nickel oxyhydroxides, Ni x (Fe 1– x )O y H z , are among the most promising oxygen evolution reaction (OER) electrocatalysts in alkaline environments. Although iron (Fe) significantly enhances the catalytic activity, there is still no clear consensus on whether Fe directly participates in the reaction or merely acts as a promoter. To elucidate the Fe’s role, we performed operando X-ray spectroscopy studies supported by DFT on Ni x (Fe 1– x )O y H z electrocatalysts. We probed the reversible changes in the structure and electronic character of Ni x (Fe 1– x )O y H z as the electrode potential is cycled between the resting (here at 1.10 V RHE ) and operational states (1.66 V RHE ). DFT calculations and XAS simulations on a library of Fe structures in various NiO y H z environments are in favor of a distorted local octahedral Fe(III)O 3 (OH) 3 configuration at the resting state with the NiO y H z scaffold going from α-Ni(OH) 2 to γ-NiOOH as the potential is increased. Under catalytic conditions, EXAFS and HERFD spectra reveal changes in p-d mixing (covalency) relative to the resting state between O/OH ligands and Fe leading to a shift from octahedral to square pyramidal coordination at the Fe site. XES measurements and theoretical simulations further support that the Fe equilibrium structure remains in a formal Fe(III) state under both resting and operational conditions. These spectral changes are attributed to potential dependent structural rearrangements around Fe. The results suggest that ligand dissociation leads to the C 4v symmetry as the most stable intermediate of the Fe during OER. This implies that Fe has a weakly coordinated or easily dissociable ligand that could serve to coordinate the O–O bond formation and, tentatively, play an active role in the Ni x (Fe 1– x )O y H z electrocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunable Cu Enrichment Enables Designer Syngas Electrosynthesis from CO 2

Using renewable energy to recycle CO 2 provides an opportunity to both reduce net CO 2 emissions and synthesize fuels and chemical feedstocks. It is of central importance to design electrocatalysts that both are efficient and can access a tunable spectrum of products. Syngas, a mixture of carbon monoxide (CO) and hydrogen (H 2 ), is an important chemical precursor that can be converted downstream into small molecules or larger hydrocarbons by fermentation or thermochemistry. Many processes that utilize syngas require different syngas compositions: we therefore pursued the rational design of a family of electrocatalysts that can be programmed to synthesize different designer syngas ratios. We utilize in situ surface-enhanced Raman spectroscopy and first-principles density functional theory calculations to develop a systematic picture of CO* binding on Cu-enriched Au surface model systems. Insights from these model systems are then translated to nanostructured electrocatalysts, whereby controlled Cu enrichment enables tunable syngas production while maintaining current densities greater than 20 mA/cm 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Oxygen Electrocatalysis by Nanostructured Mixed-Metal Oxides

Oxygen electrocatalysis plays a critical role in the efficiency of important energy conversion and storage systems. While many efforts have focused on designing efficient electrocatalysts for these processes, optimal catalysts that are inexpensive, active, selective, and stable are still being searched. Nonstoichiometric, mixed-metal oxides present a promising group of electrocatalysts for these processes due to the versatility of the surface composition and fast oxygen conducting properties. Herein, we demonstrate, using a combination of theoretical and experimental studies, the ability to develop design principles that can be used to engineer oxygen electrocatalysis activity of layered, mixed ionic-electronic conducting Ruddlesden– Popper (R–P) oxides. We show that a density function theory (DFT) derived descriptor, O 2 binding energy on a surface oxygen vacancy, can be effective in identifying efficient R–P oxide structures for oxygen reduction reaction (ORR). Using a controlled synthesis method, well-defined nanostructures of R–P oxides are obtained, which along with thermochemical and electrochemical activity studies are used to validate the design principles. This has led to the identification of a highly active ORR electrocatalyst, nanostructured Co-doped lanthanum nickelate oxide, which when incorporated in solid oxide fuel cell cathodes significantly enhances the performance at intermediate temperatures (~550 °C), while maintaining long-term stability. Here, the reported findings demonstrate the effectiveness of the developed design principles to engineer mixed ionic-electronic conducting oxides for efficient oxygen electrocatalysis, and the potential of nanostructured Co-doped lanthanum nickelate oxides as promising catalysts for oxygen electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural defects on converted bismuth oxide nanotubes enable highly active electrocatalysis of carbon dioxide reduction

Formic acid (or formate) is suggested to be one of the most economically viable products from electrochemical carbon dioxide reduction. However, its commercial viability hinges on the development of highly active and selective electrocatalysts. Here we report that structural defects have a profound positive impact on the electrocatalytic performance of bismuth. Bismuth oxide double-walled nanotubes with fragmented surface are prepared as a template, and are cathodically converted to defective bismuth nanotubes. This converted electrocatalyst enables carbon dioxide reduction to formate with excellent activity, selectivity and stability. Most significantly, its current density reaches ~288 mA cm -2 at -0.61 V versus reversible hydrogen electrode within a flow cell reactor under ambient conditions. Using density functional theory calculations, the excellent activity and selectivity are rationalized as the outcome of abundant defective bismuth sites that stabilize the *OCHO intermediate. Furthermore, this electrocatalyst is coupled with silicon photocathodes and achieves high-performance photoelectrochemical carbon dioxide reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly branched cobalt phosphide nanostructures for hydrogen-evolution electrocatalysis

CoP nanostructures that exposed predominantly (111) crystal facets were synthesized and evaluated for performance as electrocatalysts for the hydrogen-evolution reaction (HER). The branched CoP nanostructures were synthesized by reacting cobalt(II) acetylacetonate with trioctylphosphine in the presence of trioctylphosphine oxide. Electrodes comprised of the branched CoP nanostructures deposited at a loading density of ~1 mg cm -2 on Ti electrodes required an overpotential of -117 mV to produce a current density of -20 mA cm -2 in 0.50 M H 2 SO 4 . Hence the branched CoP nanostructures belong to the growing family of highly active non-noble-metal HER electrocatalysts. Finally, comparisons with related CoP systems have provided insights into the impact that shape-controlled nanoparticles and nanoparticle–electrode interactions have on the activity and stability of nanostructured HER electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluorine substituted (Mn,Ir)O 2 :F high performance solid solution oxygen evolution reaction electro-catalysts for PEM water electrolysis

Identification and development of high performance with reduced overpotential (i.e. reduced operating electricity cost) oxygen evolution reaction (OER) electrocatalysts for proton exchange membrane (PEM) based water electrolysis with ultra-low noble metal content (i.e. reduced materials cost) is of significant interest for economic hydrogen production, thus increasing the commercialization potential of PEM water electrolysis. Accordingly, a novel electrocatalyst should exhibit low overpotential, excellent electrochemical activity and durability superior to state of the art noble metal based electro-catalysts (e.g. Pt, IrO 2 , RuO 2 ). Here in this paper, for the very first time to the best of our knowledge, exploiting first-principles theoretical calculations of the total energies and electronic structures, we have identified a reduced noble metal content fluorine doped solid solution of MnO 2 and IrO 2 , denoted as (Mn 1-x Ir x )O 2 :F (x = 0.2, 0.3, 0.4), OER electrocatalyst system exhibiting lower overpotential and higher current density than the state of the art IrO 2 and other previously reported systems for PEM water electrolysis. The doped solid solution displays an excellent electrochemical performance with a lowest reported onset potential to date of ~1.35 V (vs. RHE), ~80 mV lower than that of IrO 2 (~1.43 V vs. RHE) and ~15 fold (x = 0.3 and 0.4) higher electrochemical activity compared to pure IrO 2 . In addition, the system displays excellent long term electrochemical durability, similar to that of IrO 2 in harsh acidic OER operating conditions. Our study therefore demonstrates remarkable, ~60–80% reduction in noble metal content along with lower overpotential and excellent electrochemical performance clearly demonstrating the potential of the (Mn 1-x Ir x )O 2 :F system as an OER electro-catalyst for PEM water electrolysis.

08 HYDROGEN↗

A cyanide-bridged di-manganese carbonyl complex that photochemically reduces CO 2 to CO

Manganese(I) tricarbonyl complexes such as [Mn(bpy)(CO) 3 L] (L = Br, or CN) are known to be electrocatalysts for CO 2 reduction to CO. However, due to their rapid photodegradation under UV and visible light, these monomeric manganese complexes have not been considered as photocatalysts for CO 2 reduction without the use of a photosensitizer. We report a cyanide-bridged di-manganese complex, {[Mn(bpy)(CO) 3 ] 2 (μ-CN)}ClO 4 , which is both electrocatalytic and photochemically active for CO 2 reduction to CO. Compared to the [Mn(bpy)(CO) 3 CN] electrocatalyst, our CN-bridged binuclear complex is a more efficient electrocatalyst for CO 2 reduction using H 2 O as a proton source. In addition, we report a photochemical CO 2 reduction to CO using the dimanganese complex under 395 nm irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nickel–copper supported on a carbon black hydrogen oxidation catalyst integrated into an anion-exchange membrane fuel cell

This work introduces the first practical platinum group metal-free (PGM-free) electrocatalyst for hydrogen oxidation reaction (HOR) in alkaline membrane fuel cells (AMFC), based on nickel-rich Ni 95 Cu 5 -alloy nanoparticles supported on Ketjenblack (KB) family carbon blacks. The catalyst synthesis is scalable and results in expected true alloy of NiCu, which is thoroughly characterized by XRD, microscopy and XPS. Reactivity of the catalyst towards HOR is studied by cyclic voltammetry and explained in view of its composition and structure. This catalyst showed highest specific activity compared to previously reported NiCu electrocatalysts and was successfully integrated into an AMFC membrane electrode assembly (MEA) using commercially available state-of-the-art membrane and ionomer. Single MEA fuel cell tests have demonstrated power density of 350 mWcm -2 at 80°C, which sets a technical record for a PGM-free anode in realistic operating conditions. The MEA with NiCu/KB anode catalysts layer were evaluated by in situ nano- and operando micro-X-ray computed tomography (CT) and results suggest that the nickel state in NiCu is hydrophobic in nature, where the NiCu surface may be isostructural with β-Ni(OH) 2 . The hydrophobic nature of electrocatalyst allows for improved water distribution in MEA and overall fuel cell as observed with operando micro X-ray CT.

25 ENERGY STORAGE↗

Carbon nanotube-linked hollow carbon nanospheres doped with iron and nitrogen as single-atom catalysts for the oxygen reduction reaction in acidic solutions

Non-noble metal electrocatalysts toward the oxygen reduction reaction (ORR) are highly required to substitute expensive Pt/C as the cathode of proton exchange membrane fuel cells. However, the relatively low ORR activity of Pt-free catalysts under acidic conditions is the major issue. Herein, we engineered a three-dimensional structure consisting of atomically dispersed Fe, N-doped hollow carbon nanospheres linked by carbon nanotubes as an electrocatalyst for the ORR. Benefiting from the unique structure and high-density atomic Fe–N x sites, this new type of electrocatalyst showed an impressive ORR half-wave potential of 0.84 V and kinetic current density of 13.1 mA cm -2 at a potential of 0.8 V in acidic media, which was even better those of commercial Pt/C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrocatalytic H 2 evolution promoted by a bioinspired (N2S2)Ni( ii ) complex

A bioinspired (N2S2)Ni(II) electrocatalyst is reported that produces H 2 from CF 3 CO 2 H with a turnover frequency (TOF) of ~1250 s –1 at low acid concentration (<0.043 M) in MeCN. A mechanism for the H 2 production by this electrocatalyst is proposed and its activity is benchmarked against those of other reported molecular Ni H 2 evolution electrocatalysts. Here, the involvement of a hemilabile pyridyl group of the N2S2 ligand is proposed to mimic the role of a cysteine residue involved in the biological proton reduction performed by [NiFe] hydrogenases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Doping-modulated strain control of bifunctional electrocatalysis for rechargeable zinc–air batteries

Changes in the local atomic arrangement in a crystal caused by lattice-mismatch-induced strain can efficiently regulate the performance of electrocatalysts for zinc–air batteries (ZABs) in many manners, mainly due to modulated electronic structure configurations that affect the adsorption energies for oxygen-intermediates formed during oxygen reduction and evolution reactions (ORR and OER). However, the application of strain engineering in electrocatalysis has been limited by the strain relaxation caused by structural instability such as dissolution and destruction, leading to insufficient durability towards the ORR/OER. In this work, we propose a doping strategy to modulate the phase transition and formation of self-supported cobalt fluoride–sulfide (CoFS) nanoporous films using a low amount of copper (Cu) as a dopant. This well-defined Cu–CoFS heterostructure overcomes the obstacle of structural instability. Our study of the proposed Cu–CoFS also helps establish the structure–property relationship of strained electrocatalysts by unraveling the role of local strain in regulating the electronic structure of the catalyst. As a proof-of-concept, the Cu–CoFS electrocatalyst with doping-modulated strain exhibited superior onset potentials of 0.91 V and 1.49 V for the ORR and OER, respectively, surpassing commercial Pt/C@RuO 2 and benchmarking non-platinum group metal (non-PGM) catalysts. ZABs with the Cu–CoFS catalyst delivered excellent charge/discharge cycling performance with an extremely low voltage gap of 0.5 V at a current density of 10 mA cm –2 and successively 0.93 V at a high current density of 100 mA cm –2 and afforded an outstanding peak power density of 255 mW cm –2 .

25 ENERGY STORAGE↗

Revealing the effect of interfacial electron transfer in heterostructured Co 9 S 8 @NiFe LDH for enhanced electrocatalytic oxygen evolution

Heterointerface engineering is a desirable way to rationally design efficient and low-cost electrocatalysts for the oxygen evolution reaction (OER). Herein, urchin-like Co 9 S 8 @NiFe layered double hydroxide (Co 9 S 8 @NiFe LDH) heterostructured hollow spheres are assembled from Co 9 S 8 hollow spheres as the core and porous NiFe LDH nanowires as the shell. The heterostructured hollow spheres show a small overpotential of 220 mV at a current density of 10 mA cm -2 , a low Tafel slope of 52.0 mV dec -1 , and robust stability, which is better than that of commercial IrO 2 and most reported non-precious electrocatalysts. Density functional theory (DFT) calculations show that the synergetic effect at the interface could improve the electrical conductivity of Co 9 S 8 @NiFe LDH, induce electron transfer from NiFe LDH to Co 9 S 8 , and lower the energy barriers of intermediates for the OER, leading to enhanced electrocatalytic activity. Meanwhile, the urchin-like hollow structure with nanopores and super-hydrophilicity can provide desired structural stability, facilitate ion penetration and release bubbles, improving the accessibility of active sites and thereby boosting OER catalytic performance. This work provides a viable route to develop high performance electrocatalysts for the OER.

36 MATERIALS SCIENCE↗