Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Theoretical determination of nozzle admittances using a finite element approach

A finite element method is used to predict the admittances of axisymmetric nozzles. It is assumed that the flow in the nozzle is isentropic and irrotational, and the disturbances are small so that linear analyses apply. An approximate, two dimensional compressible model is used to describe the steady flow in the nozzle. The propagation of acoustic disturbances is governed by the complete linear wave equation. The differential form of the acoustic equation is transformed to an integral equation using Galerkin's method, and Green's theorem is applied so that the acoustic boundary conditions can be introduced through the boundary residuals. A two-dimensional FEM using linear elements is used to solve the acoustic equation. A one dimensional FEM is also used to solve the reduced equation of Crocco, and the solution verifies the sufficiency of the boundary residual formulation. Comparison between computed admittances and experimental data is shown to be quite good.

Sigman, R. K.↗

A finite element approach for predicting nozzle admittances

A finite element method is used to predict the admittances of axisymmetric nozzles. It is assumed that the flow in the nozzle is isentropic and the disturbances are small so that linear analyses apply. An approximate, two dimensional compressible model is used to describe the steady flow in the nozzle. The propagation of acoustic disturbances is governed by the complete linear wave equation. The differential form of the acoustic equation is transformed to an integral equation by using Galerkin's method, and Green's theorem is applied so that the acoustic boundary conditions can be introduced through the boundary residuals. The boundary conditions are described for both straight and curved sonic lines. A two dimensional FEM with linear elements is used to solve the acoustic equation. A one dimensional FEM is also used to solve the reduced equation of Crocco, and the solution verifies the sufficiency of the boundary residual formulation. Comparison between computed admittances and experimental data is shown to be quite good.

Sigman, R. K.↗

On the decoder error probability of linear codes

By using coding and combinatorial techniques, an approximate formula for the weight distribution of decodable words of most linear block codes is evaluated. This formula is then used to give an approximate expression for the decoder error probability P(sub E)(u) of linear block codes, given that an error pattern of weight u has occurred. It is shown that P(sub E)(u) approaches the constant Q as u gets large, where Q is the probability that a completely random error pattern will cause decoder error.

Cheung, K.-M.↗

Theoretical determination of nozzle admittances using a finite element method

A finite element method (FEM) is used to predict the admittances of axisymmetric nozzles. The flow in the nozzle is assumed to be isentropic and the disturbances are assumed to be small so that linear analyses apply. An approximate two dimensional compressible flow model is used to describe the steady flow in the nozzle. The propagation of acoustic disturbances is governed by the complete linear acoustic wave equation. This partial differential wave equation is transformed to an integral equation using Galerkin's method and Green's theorem is applied so that the acoustic boundary conditions can be introduced through the boundary residuals. A two dimensional finite element method using linear triangular elements is used to solve the integral acoustic equation. A one dimensional FEM is used to solve the reduced nozzle acoustic equation developed by Crocco and the solution is used to verify the sufficiency of the boundary residual formation. It is shown that agreement between predicted values of the admittance and experimental data is quite good.

Sigman, R. K.↗

Stochastic process models for linear structure behavior.

Linear systems are good approximations of the input-output relationship for many real systems. In practice, ensembles of nominally identical systems can seldom be adequately represented by a single linear system. Some accommodation needs to be made for representing inherent ensemble randomness. One approach would be to use a parameterized model of the system, with the random nature captured in discrete parameters of the parameterized model. Another approach is to use data measured from each system in the ensemble to represent the random nature of the ensemble in a non-parametric form. This is the approach described in this paper. There are several different types of data that could be collected from each system in the ensemble, each type capable of capturing the input-output behavior of the linear system: input-output time domain data, perhaps with specific excitation sequences; Markov parameters; and Frequency Response Functions (FRFs) to name a few. We choose to work with FRF data because many system attributes can be easily interpreted by inspection of the FRF. FRF data can also be used directly for control design. This paper develops a Karhunen-Loeve expansion representation for linear system behavior based on FRF data to develop a compact representation of the uncertainty inherent in an ensemble of systems. This non-parametric, compact, representation of the distribution of linear systems can then be used to characterize the performance and stability of a given feedback control law, as well as for control law design.

42 ENGINEERING↗

Identification and Online Updating of Dynamic Models for Demand Response of an Industrial Air Separation Unit

Demand-response operation of air separation units requires frequent changes in production rate(s), and scheduling calculations must explicitly consider process dynamics to ensure feasibility of the solutions. To this end, scale-bridging models (SBMs) approximate the scheduling-relevant dynamics of a process and its controller in a low-order representation. In contrast to previous works that have employed nonlinear SBMs, this paper proposes linear SBMs, developed using time-series analysis, to facilitate online scheduling computations. Using a year-long industrial dataset, we nd that compact linear SBMs are suitable approximations over typical scheduling horizons, but that their accuracies are unpredictable over time. We introduce a strategy for online updating of the SBMs, based on Kalman ltering schemes for online parameter estimation. The approach greatly improves the accuracy of SBM predictions and will enable the use of linear SBM-based demand-response scheduling in the future.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Remote sensing of thermal radiation from an aircraft - An analysis and evaluation of crop-freeze protection methods

Thermal images from an aircraft-mounted scanner are used to evaluate the effectiveness of crop-freeze protection devices. Data from flights made while using fuel oil heaters, a wind machine and an undercanopy irrigation system are compared. Results show that the overall protection provided by irrigation (at approximately 2 C) is comparable to the less energy-efficient heater-wind machine combination. Protection provided by the wind machine alone (at approximately 1 C) was found to decrease linearly with distance from the machine by approximately 1 C/100 m. The flights were made over a 1.5 hectare citrus grove at an altitude of 450 m with an 8-14 micron detector. General meteorological conditions during the experiments, conducted during the nighttime, were cold (at approximately -6 C) and calm with clear skies.

Sutherland, R. A.↗

Convergence of Galerkin approximations for operator Riccati equations: A nonlinear evolution equation approach

An approximation and convergence theory was developed for Galerkin approximations to infinite dimensional operator Riccati differential equations formulated in the space of Hilbert-Schmidt operators on a separable Hilbert space. The Riccati equation was treated as a nonlinear evolution equation with dynamics described by a nonlinear monotone perturbation of a strongly coercive linear operator. A generic approximation result was proven for quasi-autonomous nonlinear evolution system involving accretive operators which was then used to demonstrate the Hilbert-Schmidt norm convergence of Galerkin approximations to the solution of the Riccati equation. The application of the results was illustrated in the context of a linear quadratic optimal control problem for a one dimensional heat equation.

Rosen, I. G.↗

Approximating electronically excited states with equation-of-motion linear coupled-cluster theory

A new perturbative approach to canonical equation-of-motion coupled-cluster theory is presented using coupled-cluster perturbation theory. A second-order Møller-Plesset partitioning of the Hamiltonian is used to obtain the well known equation-of-motion many-body perturbation theory equations and two new equation-of-motion methods based on the linear coupled-cluster doubles and linear coupled-cluster singles and doubles wavefunctions. These new methods are benchmarked against very accurate theoretical and experimental spectra from 25 small organic molecules. It is found that the proposed methods have excellent agreement with canonical equation-of-motion coupled-cluster singles and doubles state for state orderings and relative excited state energies as well as acceptable quantitative agreement for absolute excitation energies compared with the best estimate theory and experimental spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aerodynamic Design Study of an Advanced Active Twist Rotor

An Advanced Active Twist Rotor (AATR) is currently being developed by the U.S. Army Vehicle Technology Directorate at NASA Langley Research Center. As a part of this effort, an analytical study was conducted to determine the impact of blade geometry on active-twist performance and, based on those findings, propose a candidate aerodynamic design for the AATR. The process began by creating a baseline design which combined the dynamic design of the original Active Twist Rotor and the aerodynamic design of a high lift rotor concept. The baseline model was used to conduct a series of parametric studies to examine the effect of linear blade twist and blade tip sweep, droop, and taper on active-twist performance. Rotor power requirements and hub vibration were also examined at flight conditions ranging from hover to advance ratio = 0.40. A total of 108 candidate designs were analyzed using the second-generation version of the Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD II) code. The study concluded that the vibration reduction capabilities of a rotor utilizing controlled, strain-induced twisting are enhanced through the incorporation of blade tip sweep, droop, and taper into the blade design, while they are degraded by increasing the nose-down linear blade twist. Based on the analysis of rotor power, hub vibration, and active-twist response, a candidate aerodynamic design for the AATR consisting of a blade with approximately 10 degrees of linear blade twist and a blade tip design with 30 degree sweep, 10 degree droop, and 2.5:1 taper ratio over the outer five percent of the blade is proposed.

Sekula, Martin K.↗

An unsteady lifting surface method for single rotation propellers

The mathematical formulation of a lifting surface method for evaluating the steady and unsteady loads induced on single rotation propellers by blade vibration and inflow distortion is described. The scheme is based on 3-D linearized compressible aerodynamics and presumes that all disturbances are simple harmonic in time. This approximation leads to a direct linear integral relation between the normal velocity on the blade (which is determined from the blade geometry and motion) and the distribution of pressure difference across the blade. This linear relation is discretized by breaking the blade up into subareas (panels) on which the pressure difference is treated as approximately constant, and constraining the normal velocity at one (control) point on each panel. The piece-wise constant loads can then be determined by Gaussian elimination. The resulting blade loads can be used in performance, stability and forced response predictions for the rotor. Mathematical and numerical aspects of the method are examined. A selection of results obtained from the method is presented. The appendices include various details of the derivation that were felt to be secondary to the main development in Section 1.

Williams, Marc H.↗

Sequential Monte Carlo sampling in hidden Markov models of nonlinear dynamical systems

We investigate the issue of which state functionals can have their uncertainty estimated efficiently in dynamical systems with uncertainty. Because of the high dimensionality and complexity of the problem, sequential Monte Carlo (SMC) methods are used. We investigate SMC methods where the proposal distribution is computed by maximum likelihood or by a linearization approach. We prove that the variance of the SMC method is bounded linearly in the number of time steps when the proposal distribution is truncated normal distribution. We also show that for a moderate large number of steps the error produced by approximation of dynamical systems linearly accumulates on the condition that the logarithm of the density function of noise is Lipschitz continuous. This finding is significant because the uncertainty in many dynamical systems, in particular, in chemical engineering systems, can be assumed to have this nature. We demonstrate our findings for a simple test case from chemical engineering. The theoretical findings provide a foundation for the parallel software SISTOS.

97 MATHEMATICS AND COMPUTING↗

Charge exchange transition probability for collisions between unlike ions and atoms within the adiabatic approximation

A simple formula for the transition probability for electron exchange between unlike ions and atoms is established within the adiabatic approximation by employing the Linear Combination of Atomic Orbitals (LCAO) method. The formula also involves an adiabatic parameter, introduced by Massey, and thus the difficulties arising from the internal energy defect and the adiabatic approximation are avoided. Specific reactions Li(+++) + H to Li(++) + H(+) and Be(4+) + H to Be(3+) + H(+) are considered as examples. The calculated capture cross section results of the present work are compared with the experimental data and with the calculation of other authors over the velocity range of 10(7) cm/sec to 10(8) cm/sec.

Xu, Y. J.↗

Interaction of fast charged projectiles with two-dimensional electron gas: Interaction and collisional-damping effects

The results of a theoretical investigation on the stopping power of ions moving in a two-dimensional degenerate electron gas are presented. The stopping power for an ion is calculated employing linear-response theory using the dielectric function approach. The collisions, which lead to a damping of plasmons and quasiparticles in the electron gas, is taken into account through a relaxation-time approximation in the linear-response function. The stopping power for an ion is calculated in both the low- and high-velocity limits. In order to highlight the effects of damping, we present a comparison of our analytical and numerical results, in the case of pointlike ions, obtained for a nonzero damping with those for a vanishing damping. It is shown that the equipartition sum rule first formulated by Lindhard and Winther for three-dimensional degenerate electron gas does not necessarily hold in two dimensions. We have generalized this rule introducing an effective dielectric function. In addition, some results for two-dimensional interacting electron gas have been obtained. In this case, the exchange-correlation interactions of electrons are considered via local-field corrected dielectric function.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Remarks on Hierarchic Control for a Linearized Micropolar Fluids System in Moving Domains

We study a Stackelberg strategy subject to the evolutionary linearized micropolar fluids equations in domains with moving boundaries, considering a Nash multi-objective equilibrium (non necessarily cooperative) for the “follower players” (as is called in the economy field) and an optimal problem for the leader player with approximate controllability objective. We will obtain the following main results: the existence and uniqueness of Nash equilibrium and its characterization, the approximate controllability of the linearized micropolar system with respect to the leader control and the existence and uniqueness of the Stackelberg–Nash problem, where the optimality system for the leader is given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficiency in nonequilibrium molecular dynamics Monte Carlo simulations

Hybrid algorithms combining nonequilibrium molecular dynamics and Monte Carlo (neMD/MC) offer a powerful avenue for improving the sampling efficiency of computer simulations of complex systems. These neMD/MC algorithms are also increasingly finding use in applications where conventional approaches are impractical, such as constant-pH simulations with explicit solvent. However, selecting an optimal nonequilibrium protocol for maximum efficiency often represents a non-trivial challenge. This work evaluates the efficiency of a broad class of neMD/MC algorithms and protocols within the theoretical framework of linear response theory. The approximations are validated against constant pH-MD simulations and shown to provide accurate predictions of neMD/MC performance. An assessment of a large set of protocols confirms (both theoretically and empirically) that a linear work protocol gives the best neMD/MC performance. Lastly, a well-defined criterion for optimizing the time parameters of the protocol is proposed and demonstrated with an adaptive algorithm that improves the performance on-the-fly with minimal cost.

97 MATHEMATICS AND COMPUTING↗

Massive neutrinos in cosmology: Analytic solutions and fluid approximation

We study the evolution of linear density fluctuations of free-streaming massive neutrinos at redshift of z<1000, with an explicit justification on the use of a fluid approximation. We solve the collisionless Boltzmann equation in an Einstein de-Sitter (EdS) universe, truncating the Boltzmann hierarchy at l{sub max}=1 and 2, and compare the resulting density contrast of neutrinos {delta}{sub {nu}}{sup fluid} with that of the exact solutions of the Boltzmann equation that we derive in this paper. Roughly speaking, the fluid approximation is accurate if neutrinos were already nonrelativistic when the neutrino density fluctuation of a given wave number entered the horizon. We find that the fluid approximation is accurate at subpercent levels for massive neutrinos with m{sub {nu}>}0.05 eV at the scale of k < or approx. 1.0h Mpc{sup -1} and redshift of z<100. This result validates the use of the fluid approximation, at least for the most massive species of neutrinos suggested by the neutrino oscillation experiments. We also find that the density contrast calculated from fluid equations (i.e., continuity and Euler equations) becomes a better approximation at a lower redshift, and the accuracy can be further improved by including an anisotropic stress term in the Euler equation. The anisotropic stress term effectively increases the pressure term by a factor of 9/5.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗