Search NASA⌕ Search

SEARCH · Search NASA

Results for “reverse engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Symmetry-Protected Moiré Band Engineering and Enhanced Electron–Phonon Coupling in Xe/Bi 2 Se 3 Superlattices: Path to Topological Superconductivity

Observation of superconductivity, magnetism, and correlated insulating phases driven by the moiré potential in twisted graphene bilayer has opened the exciting new field of “twistronics”. Even richer physics is expected if moiré superlattice could be generated on topological insulators; however, until now, experimental studies have been scarce. Here, we demonstrate topological moirés generated by adsorbing a monolayer of noble gas on a topological insulator. By angle-resolved photoemission spectroscopy, we show that the moiré potential replicates the topological surface state and affects it in a way fundamentally different from the trivial states. Replicated Dirac cones generally avoid crossings, except at the time-reversal invariant momenta that remain gapless. This creates van Hove singularities at the moiré Brillouin zone corners, providing the mechanism of enhancing correlations. Indeed, we observe a strong enhancement of the electron–phonon coupling strength that, if properly tuned, might lead to topological superconductivity and Majorana Fermions.

36 MATERIALS SCIENCE↗

Reversible Emulsions from Polyoxometalate–Polymer: A Robust Strategy to Cyclic Emulsion Catalysis and High-Internal-Phase Emulsion Materials

Reversible Pickering emulsions, achieved by switchable, interfacially active colloidal particles, that enable on-demand emulsification/demulsification or phase inversion, hold substantial promise for biphasic catalysis, emulsion polymerization, cutting fluids, and crude oil pipeline transportation. However, particles with such a responsive behavior usually require complex chemical syntheses and surface modifications, limiting their extensive use. Herein, we report a simple route to generate emulsions that can be controlled and reversibly undergo phase inversion. The emulsions are prepared and stabilized by the interfacial assembly of polyoxometalate (POM)–polymer, where their electrostatic interaction at the interface is dynamic. The wettability of the POMs that dictates the emulsion type can be readily regulated by tuning the number of polymer chains bound to POMs, which, in turn, can be controlled by varying the concentrations of both components and the water/oil ratio. In addition, the number of polymer chains anchored to the POMs can be varied by controlling the number of negative charges on the POMs through an in situ redox reaction. As such, a reversible inversion of the emulsions can be triggered by switching between exposure to ultraviolet light and the introduction of oxygen. Combining the functions of POM itself, a cyclic interfacial catalysis system was realized. Inversion of the emulsion also affords a pathway to high-internal-phase emulsions. Finally, the diversity of the POMs, the polymers, and the responsive switching groups open numerous new, simple strategies for designing a wide range of responsive soft matter for cargo loading, controlled release, and delivery in biomedical and engineering applications without time-consuming particle syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stacking sequence and interlayer coupling in few-layer graphene revealed by in situ imaging

In the transition from graphene to graphite, the addition of each individual graphene layer modifies the electronic structure and produces a different material with unique properties. Controlled growth of few-layer graphene is therefore of fundamental interest and will provide access to materials with engineered electronic structure. Here we combine isothermal growth and etching experiments with in situ scanning electron microscopy to reveal the stacking sequence and interlayer coupling strength in few-layer graphene. The observed layer-dependent etching rates reveal the relative strength of the graphene graphene and graphene substrate interaction and the resulting mode of adlayer growth. Scanning tunnelling microscopy and density functional theory calculations confirm a strong coupling between graphene edge atoms and platinum. Simulated etching confirms that etching can be viewed as reversed growth. This work demonstrates that real-time imaging under controlled atmosphere is a powerful method for designing synthesis protocols for sp2 carbon nanostructures in between graphene and graphite.

36 MATERIALS SCIENCE↗

Nanoscale decoupling of electronic nematicity and structural anisotropy in FeSe thin films

In a material prone to a nematic instability, anisotropic strain in principle provides a preferred symmetry-breaking direction for the electronic nematic state to follow. This is consistent with experimental observations, where electronic nematicity and structural anisotropy typically appear hand-in-hand. In this work, we discover that electronic nematicity can be locally decoupled from the underlying structural anisotropy in strain-engineered iron-selenide (FeSe) thin films. We use heteroepitaxial molecular beam epitaxy to grow FeSe with a nanoscale network of modulations that give rise to spatially varying strain. We map local anisotropic strain by analyzing scanning tunneling microscopy topographs, and visualize electronic nematic domains from concomitant spectroscopic maps. While the domains form so that the energy of nemato-elastic coupling is minimized, we observe distinct regions where electronic nematic ordering fails to flip direction, even though the underlying structural anisotropy is locally reversed. The findings point towards a nanometer-scale stiffness of the nematic order parameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unraveling two distinct polymorph transition mechanisms in one n-type single crystal for dynamic electronics

Cooperativity is used by living systems to circumvent energetic and entropic barriers to yield highly efficient molecular processes. Cooperative structural transitions involve the concerted displacement of molecules in a crystalline material, as opposed to typical molecule-by-molecule nucleation and growth mechanisms which often break single crystallinity. Cooperative transitions have acquired much attention for low transition barriers, ultrafast kinetics, and structural reversibility. However, cooperative transitions are rare in molecular crystals and their origin is poorly understood. Crystals of 2-dimensional quinoidal terthiophene (2DQTT-o-B), a high-performance n-type organic semiconductor, demonstrate two distinct thermally activated phase transitions following these mechanisms. Here we show reorientation of the alkyl side chains triggers cooperative behavior, tilting the molecules like dominos. Whereas, nucleation and growth transition is coincident with increasing alkyl chain disorder and driven by forming a biradical state. We establish alkyl chain engineering as integral to rationally controlling these polymorphic behaviors for novel electronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermoplastic moulding of regenerated silk

Early insights into the unique structure and properties of native silk suggested that β-sheet nanocrystallites in silk would degrade prior to melting when subjected to thermal processing. Since then, canonical approaches for fabricating silk-based materials typically involve solution-derived processing methods, which have inherent limitations with respect to silk protein solubility and stability in solution, and time and cost efficiency. In this study, we report a thermal processing method for the direct solid-state moulding of regenerated silk into bulk ‘parts’ or devices with tunable mechanical properties. At elevated temperature and pressure, regenerated amorphous silk nanomaterials with ultralow β-sheet content undergo thermal fusion via molecular rearrangement and self-assembly assisted by bound water to form a robust bulk material that retains biocompatibility, degradability and machinability. This technique reverses presumptions about the limitations of direct thermal processing of silk into a wide range of new material formats and composite materials with tailored properties and functionalities.

36 MATERIALS SCIENCE↗

Exchange anisotropy, engineered coercivity and spintronics in atomically engineered L1 0 heterostructures

We identified and investigated some of the scientific and technically most challenging issues in thin film magnetism focusing on epitaxially grown layers of specific L1 0 ordered, intermetallic, heterostructures with well-controlled crystallography and interface structures. Specifically, we addressed antiferromagnetic/ferromagnetic heterostructures, exhibiting exchange bias (EB) in both in-plane (MnPd/Fe) and perpendicular (IrMn/(Co/Pt) n ) geometries, and ferromagnetic/ferrimagnetic (Co/Y 3 Fe 5 O 12 ) bilayers with strong interlayer exchange coupling and exhibiting spin reorientation transitions. In the former case, the work included experimental and theoretical studies to gain more fundamental insight into the origin and magnitude of EB, as well as to address important aspects of EB such as the asymmetry in the magnetic reversal mechanism, the role of interfacial structure, including compensated or uncompensated spins, AF domains, competing anisotropies and the angular dependence of the magnetization reversal process. Exchange bias is central to many magnetic technologies and driven by the fast development of nanotechnology, there is much interest in understanding the phenomenon of exchange bias on the nanoscale. By patterning, as the FM domain size reaches a lateral scale comparable to the AF domain size (~100nm), each nano-element can be treated as a separate and isolated exchange bias system that behaves independently. Therefore, the non-averaged, intrinsic, exchange bias, in all its complexity, can be studied. Such size and dimensionality effects, particularly in structures with lateral dimension of the order of their domain sizes, were studied by developing and implementing a novel Nano-imprint as well as convention optical lithography/patterning. However, one limitation of the NIL method is that after imprinting the material-deposition or -evaporation has to be done at around room temperature in order to keep the resists structure undisturbed. As a result, the method is unsuitable for epitaxial growth, since the latter often involves growth at elevated temperatures higher than the glass transition temperature of the resist. Therefore, a mask transfer NIL process was developed to grow epitaxial nanostructure arrays at elevated temperatures where organic resists are rendered unstable. In the case of the metal/oxide heterostructures, the domain structure of the metal is carefully modulated by that of the underlying oxide, opening the possibility of carrying out novel experiments to study spin-dependent domain-wall scattering and quantify domain wall resistance in mesoscopic geometries. Utilizing state-of-the-art characterization methods, using synchrotron radiation and electron holography, we addressed the critical role of all aspects of the microstructure, at relevant length scales, in determining these specific magnetic properties. Two significant highlights of this project were the use of photoemission electron microscopy (PEEM) work to elucidate their asymmetric magnetization reversal mechanism and the use of element-specific X-ray magnetic reflectivity and x-ray resonant scattering to probe buried interfaces, both of importance in understanding the fundamental physics of exchange bias. In the latter case, a complex magnetic interfacial configuration in Fe/MnPd, consisting of a 2-monolayer-thick induced ferromagnetic region, and pinned uncompensated Mn moments that reach far deeper (~13 Å), both in the antiferromagnet, were found. Such epitaxial EB samples also show in-plane reorientation transitions, determined by the competition between the interface exchange coupling and the intrinsic uniaxial energies, and is driven by the temperature, as well as the thickness of MnPd and Fe layers. Complementing these results, work on multilayers show that perpendicular EB arise from a complex interplay between unidirectional anisotropy at the terminating FM/AFM interface, the perpendicular anisotropy of the FM/nonmagnet(NM) multilayer stack and the overall magnetostatic energy of the structure. Collaborative work with Prof. R. Stamps (UWA) in modeling and analysis of slow-dynamics, using an inductive ferromagnetic resonance technique, were also carried out. Further details of our research is presented below broadly in five thematic areas. Overall, this research allowed us to obtain a deeper understanding of the range of related magnetic phenomena and establish pathways for potential technological applications of these thin film and patterned heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of high-cycle fatigue design curves for a cast aluminum alloy

Life prediction curves for rocket engine pump parts were developed from the results of high-cycle fatigue tests run on cast-aluminum specimens. Notched and smooth specimens were cyclically tested at different mean stress levels at -320 F (78 K). The notch size and mean stress enveloped the design operating conditions. Local stress computed in the groove of the notched specimen was used to represent its fatigue strength. The von Mises criterion was used to determine effective cyclic stresses. The Goodman rule was applied to determine equivalent reversed alternating stresses. The procedure permitted the notched and smooth data sets to each be described by a single curve. High-cycle fatigue life curves were provided for the stress state, mean stress, and stress concentration spanned by the data.

Cooper, R. A.↗

FIRE IMPACTS ON AN ENGINEERED BARRIER’S PERFORMANCE: THE HANFORD BARRIER ONE YEAR AFTER A CONTROLLED BURN

A critical unknown for long-term engineered barrier performance is the effect of wild fire during a post-institutional control environment where routine maintenance may be limited or non-existent. In September 2008, a controlled burn was conducted on one half of a vegetated, multilayered capillary barrier emplaced over a Hanford waste site. The effects on barrier performance have been monitored and documented over the past year. Soil physical, chemical, and hydrologic properties; plant floristics and density; and animal-use were characterized before and after the fire with the unburned half of the barrier serving as a control. Temperatures during the controlled burn ranged from 250 oC at 1.5 cm below the surface to over 700 oC at 1 m above the surface. Significant decreases in hydraulic conductivity and surface-soil wettability were observed immediately after the fire due primarily to hydrophobic conditions created by the fire. Major soil nutrients, pH, and electrical conductivity remain elevated post-fire. Up until June 2009, post-burn soil moisture content in the 0-1 m depth interval was significantly lower on the burned section than the unburned section and is attributed to differences in surface evaporation. Higher soil moisture contents in the 1-2 m interval on the burned section are attributed to insignificant water uptake owing to the absence of deep-rooted shrubs. Moisture profiles reversed after June to show lower water contents throughout the profile on the unburned section. Dense stands of sagebrush were destroyed from the fire allowing many more species to emerge thereby increasing species diversity. Seed sources contributing to this species diversification were from either the existing seedbank and/or wind-blown sources. Measurements are ongoing and the results are expected to help close a knowledge gap about barrier recovery after major disturbances.

54 ENVIRONMENTAL SCIENCES↗

Uncovering the role of nanoscale precipitates on martensitic transformation and superelasticity

Here we characterize the role of coherent nanoscale B2 Ni 50 Al 50 precipitates on the temperature- and stress-induced martensitic phase transformation in nanocrystalline Ni 63 Al 37 shape memory alloys using multi-million-atoms molecular dynamics (MD) simulations. We studied two types of precipitates: one with single crystal precipitates (SXP) and a second where grain boundaries cut through precipitates (PXP). Simulations reveal that the presence of B2 precipitates stabilizes the cyclic flag-shaped stress-strain response, characteristic of superelasticity, and reduces remnant strain. In contrast, single-phase nanocrystalline Ni 63 Al 37 exhibits degradation of the reverse transformation during cyclic loading and, eventually, incomplete reversible transformation within a few cycles. This is consistent with previous experimental findings of ultra-low fatigue in Ni-Ti-Cu alloys with Ti 2 Cu precipitates. The simulations reveal that the presence of precipitates significantly improves the reversibility of the transformation by acting as elastic zones that partially shield the martensitic transformation and drive the reverse transformation. A detailed analysis of the MD trajectories reveals that the martensitic transformation of the matrix induces ultra-large elastic deformation in some of the B2 precipitates (approximately 12%) to the point of resulting in a martensite-like atomic structure.

36 MATERIALS SCIENCE↗

Pnictogen-Bonding Catalysis: Copolymerization of CO 2 and Epoxides on Antimony(V) Platforms

The copolymerization of CO 2 and epoxides to access polycarbonates represents a promising strategy for CO 2 utilization and for the production of useful polymers. Aiming to explore alternative transition-metal-free approaches that support this chemistry, we have investigated a series of triaryl-catecholatostiboranes as pnictogen-bonding platforms for the copolymerization of CO 2 and cyclohexene oxide (CHO). Our survey of these antimony species has identified motifs that promote this polymerization reaction efficiently, provided that bis(triphenylphosphine)iminium chloride is administered as an activator. By coupling these polymerization studies with a careful assessment of the structure, electronic attributes and Lewis acidity of the catecholatostiboranes, this work shows that high activity is generally observed with the weakest pnictogen-bond donors or Lewis acids investigated. Mechanistic studies, which indicate that the polymerization reaction is first order in stiborane, reveal a nonlinear dependence on the CO 2 pressure. This nonlinear dependence could be satisfactorily modeled based on a pre-equilibrium process involving the reversible insertion of the gaseous monomer into the growing chain. Altogether these findings greatly expand the reach of pnictogen bond catalysis while also providing an entry for the use of heavy group 15 elements as competent platforms for CO 2 utilization.

antimony↗

Designable and dynamic single-walled stiff nanotubes assembled from sequence-defined peptoids

Despite recent advances in assembly of organic nanotubes, conferral of sequence-defined engineering and dynamic response characteristics to the tubules remains a challenge. Here we report a new family of highly-designable and dynamic single-walled nanotubes assembled from sequence-defined peptoids through a unique “rolling-up and closure of nanosheet” mechanism. During the assembly process, amorphous spherical particles of amphiphilic peptoid oligomers (APOs) crystallized to form well-defined nanosheets which were then folded to form single-walled peptoid nanotubes (SW-PNTs). These SW-PNTs undergo a pH-triggered, reversible contraction-expansion motion. By varying the number of hydrophobic residues of APOs, we demonstrate the tuning of PNT wall thickness and diameter, and mechanical properties. AFM-based mechanical measurements indicate that PNTs are highly stiff (Young’s Modulus ~13-17 GPa), comparable to the stiffest known biological materials. We further demonstrate that the precise incorporation of functional groups within PNTs and the application of functional PNTs in water decontamination. We believe these SW-PNTs can provide a robust platform for development of biomimetic materials tailored to specific applications.

36 MATERIALS SCIENCE↗

Quiet Clean Short-haul Experimental Engine (QCSEE). Aerodynamic and aeromechanical performance of a 50.8 cm (20 inch) diameter 1.34 PR variable pitch fan with core flow

The fan aerodynamic and aeromechanical performance tests of the quiet clean short haul experimental engine under the wing fan and inlet with a simulated core flow are described. Overall forward mode fan performance is presented at each rotor pitch angle setting with conventional flow pressure ratio efficiency fan maps, distinguishing the performance characteristics of the fan bypass and fan core regions. Effects of off design bypass ratio, hybrid inlet geometry, and tip radial inlet distortion on fan performance are determined. The nonaxisymmetric bypass OGV and pylon configuration is assessed relative to both total pressure loss and induced circumferential flow distortion. Reverse mode performance, obtained by resetting the rotor blades through both the stall pitch and flat pitch directions, is discussed in terms of the conventional flow pressure ratio relationship and its implications upon achievable reverse thrust. Core performance in reverse mode operation is presented in terms of overall recovery levels and radial profiles existing at the simulated core inlet plane. Observations of the starting phenomena associated with the initiation of stable rotor flow during acceleration in the reverse mode are briefly discussed. Aeromechanical response characteristics of the fan blades are presented as a separate appendix, along with a description of the vehicle instrumentation and method of data reduction.

Giffin, R. G.↗

Cascading Tesla Oscillating Flow Diode for Stirling Engine Gas Bearings

Replacing the mechanical check-valve in a Stirling engine with a micromachined, non-moving-part flow diode eliminates moving parts and reduces the risk of microparticle clogging. At very small scales, helium gas has sufficient mass momentum that it can act as a flow controller in a similar way as a transistor can redirect electrical signals with a smaller bias signal. The innovation here forces helium gas to flow in predominantly one direction by offering a clear, straight-path microchannel in one direction of flow, but then through a sophisticated geometry, the reversed flow is forced through a tortuous path. This redirection is achieved by using microfluid channel flow to force the much larger main flow into this tortuous path. While microdiodes have been developed in the past, this innovation cascades Tesla diodes to create a much higher pressure in the gas bearing supply plenum. In addition, the special shape of the leaves captures loose particles that would otherwise clog the microchannel of the gas bearing pads.

Dyson, Rodger↗

MoS 2 Catalysts Selectively Achieve High Yield of Liquid Oxygenate from Direct Conversion of Methane via Hydroxyl Radicals

Directly converting methane (CH 4 ) into liquid oxygenates (e.g., methanol) can circumvent the cost and engineering limits of natural gas transportation and storage. However, oxygenate yields from CH 4 remain low, and sulfur present in natural gas hinders activity in most catalysts. Here, to overcome these barriers, we employ bulk molybdenum disulfide (MoS 2 ), a low-cost, robust catalyst which selectively produces large quantities of liquid oxygenates (>900 µmol/g cat ∙hr) from methane in the presence of hydroxyl (OH • ) radicals produced from dilute hydrogen peroxide (H 2 O 2 ) at 75°C. Under realistic reaction conditions, MoS 2 partially and reversibly adopts a metastable, more electrically conductive phase (1T’) that can only be observed through in situ structural probes. Herein, we elucidate that redox synergy between H 2 O 2 and MoS 2 produces active OH • radical species that selectively transform CH 4 to surface methoxy species at the gas-solid liquid interface, leading to the unitary production of liquid oxygenate at a rate competitive with more costly precious metal catalysts, without additional catalyst preparation steps.

36 MATERIALS SCIENCE↗

Control of monodomain polymer-stabilized cuboidal nanocrystals of chiral nematics by confinement.

Liquid crystals are important components of optical technologies. Cuboidal crystals consisting of chiral liquid crystals-the so-called blue phases (BPs), are of particular interest due to their crystalline structures and fast response times, but it is critical that control be gained over their phase behavior as well as the underlying dislocations and grain boundaries that arise in such systems. Blue phases exhibit cubic crystalline symmetries with lattice parameters in the 100 nm range and a network of disclination lines that can be polymerized to widen the range of temperatures over which they occur. Here, we introduce the concept of strain-controlled polymerization of BPs under confinement, which enables formation of strain-correlated stabilized morphologies that, under some circumstances, can adopt perfect single-crystal monodomain structures and undergo reversible crystal-to-crystal transformations, even if their disclination lines are polymerized. We have used super-resolution laser confocal microscopy to reveal the periodic structure and the lattice planes of the strain and polymerization stabilized BPs in 3D real space. Our experimental observations are supported and interpreted by relying on theory and computational simulations in terms of a free energy functional for a tensorial order parameter. Simulations are used to determine the orientation of the lattice planes unambiguously. The findings presented here offer opportunities for engineering optical devices based on single-crystal, polymer-stabilized BPs whose inherent liquid nature, fast dynamics, and long-range crystalline order can be fully exploited.

confinement↗