Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Structure-property coupling in Sr3(Ru1 xMnx)2O7

Layered ruthenates are prototype materials for the study of structure-property correlations. We report the structural and physical properties of double-layered perovskite Sr3(Ru1 xMnx )2O7 single crystals with 0 < x < 0.7. Single-crystal x-ray diffraction refinements reveal that Mn doping on the Ru site leads to the shrinkage of unit-cell volume and the disappearance of (Ru/Mn)O6 octahedron rotation when x > 0.16, but the crystal structure remains tetragonal. Upon doping, the electrical resistivity reveals a metallic character (d /dT > 0) at high temperatures but insulating behavior (d /dT < 0) below a characteristic temperature TMIT. Interestingly, TMIT is different from TM, at which magnetic susceptibility reaches maximum. While TMIT increases monotonically with increasing x,TM displays a nonmonotonic dependence with x even though the effective spin increases from S 1 (x = 0) to 3/2 (x = 0.7). The phase diagram consists of three distinct magnetic ground states due to local structure change.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

H2 production Through the Water-gas Shift Reaction: An in Situ Time-resolved X-ray Diffraction Investigation of Manganese OMS-2 Catalyst

Manganese oxide octahedral molecular sieve (OMS-2) catalyst prepared by the reflux method was investigated for hydrogen generation via the water-gas shift reaction. Catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), The Brunauer-Emmett-Teller (BET) surface area and determination of average oxidation state (AOS). The OMS-2 catalyst showed very good catalytic activity for the water-gas shift reaction to generate hydrogen under laboratory conditions. An in situ study was conducted to monitor the structural changes in the catalyst during the water-gas shift reaction using synchrotron radiation-based time-resolved X-ray diffraction (TR-XRD). During the water-gas shift reaction, the mixed valent OMS-2 catalyst undergoes a structural transformation to form Mn{sub 2}O{sub 3} and finally to form MnO. The study showed that OMS-2 catalysts can be used as inexpensive catalysts for hydrogen generation.

08 HYDROGEN↗

Stabilization of over-stoichiometric Mn{sup 4+} in layered Na{sub 2/3}MnO{sub 2}

Sodium manganates with nominal composition Na{sub 2/3}MnO{sub 2} were prepared by solid state reaction between Na{sub 2}CO{sub 3} and MnCO{sub 3} at 1000 {sup o}C. The composition and structure of Na{sub x}MnO{sub 2} were controlled by the rate of cooling from the temperature of preparation. This is a consequence of the capability of Na{sub 2/3}MnO{sub 2} to accommodate over-stoichiometric Mn{sup 4+} ions up to 12.5%. Structural characterization was carried out by XRD powder diffractions, TEM analysis and Raman spectroscopy. The composition and oxidation state of manganese were determined by chemical analysis and magnetic susceptibility measurements. The manganese distribution in the layers was analysed using electron paramagnetic resonance (EPR) spectroscopy. By quenching from 1000 {sup o}C, the orthorhombic distorted modification is stabilized. A phase separation into orthorhombic and hexagonal modifications takes place when Na{sub 2/3}MnO{sub 2} is slow cooled. The structure changes are concomitant with an increase in the oxidation state of Mn. The over-stoichiometric Mn{sup 4+} ions are accommodated in the hexagonal modification by creation of vacancies in the MnO{sub 2}-layers. - Graphical abstract: The composition and structure of Na{sub 2/3}MnO{sub 2} were controlled by the rate of cooling from the temperature of preparation. By quenching from 1000 {sup o}C, the orthorhombic distorted modification is stabilized. A phase separation into orthorhombic and hexagonal modifications takes place when Na{sub 2/3}MnO{sub 2} is slow cooled. The over-stoichiometric Mn{sup 4+} ions are accommodated in the hexagonal modification by creation of vacancies in the MnO{sub 2}-layers.

36 MATERIALS SCIENCE↗

Li{sub x}Co{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} electrode materials: Electrochemical and structural studies

Graphical abstract: Evolution of the c{sub hex.}/a{sub hex.} ratio with x in LiCo{sub 1−2x}Mn{sub x}Ni{sub x}O{sub 2} solid solution showing that less Li/Ni disorder is observed for x < 0.4. Highlights: ► LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} is a member of the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} solid solution. ► Structural refinement of this cathode material shows no Li/Ni disorder. ► The rhombohedral symmetry was preserved upon lithium removal. ► The discharge capacity reached more than 140 mAh/g at 2C rate and 160 mAh/g at 1C. -- Abstract: LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} layered oxide in a member of the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} solid solution between LiCoO{sub 2} and LiNi{sub 0.5}Mn{sub 0.5}O{sub 2}. Compositions from this solid solution have attracted much attention and have been extensively studied as promising cathode candidates to replace the most popular LiCoO{sub 2} cathode material used in the commercial lithium-ion batteries (LiBs). LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} positive electrode material was prepared via the combustion method followed by a thermal treatment at 900 °C for 12 h. This material was characterized by a high homogeneity and a granular shape. The Rietveld refinement evidenced that the structure of this compound exhibits no Ni/Li disorder revealing that the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} system presents the ideal structure for LiBs application when x < 0.4. The electrochemical performances of the LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} sample were measured at different current rates in the 2.7–4.5 V potential range. Its discharge capacity reached 178, 161 and 145 mAhg{sup −1} at C/20, 1C and 2C, respectively. Structural changes in LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} upon delithiation were studied using ex situ X-ray diffraction. A continuous solid solution with a rhombohedral symmetry was detected in the whole composition range. This structural stability during the cycling combined with the obtained electrochemical features make this material convenient for the LiBs applications.

36 MATERIALS SCIENCE↗

Structure and Thermal Transitions in a Biomedically Relevant Liquid Crystalline Poly(ester amide)

There is still a need to develop bioresorbable polymers with high strength and high modulus for load-bearing biomedical applications. In this work we investigate the liquid crystalline structural features of poly(desaminotyrosyl-tyrosine dodecyl dodecanedioate), poly(DTD DD), a new bioresorbable poly(ester amide) that is currently studied in vivo as a slow-degrading implantable biomaterial for load bearing applications. Thermally induced structural changes in poly(DTD DD) were studied using simultaneously differential scanning calorimetry (DSC) and X-ray scattering. The hexatic SmB organization of the polymer chains that exists at room temperature becomes progressively disordered upon heating, changing into a SmF phase and then into a smectic C phase at 60 °C before turning into a free-flowing melt at 130 °C. X-ray scattering data and thermal analysis indicate the presence of a 2D ordered structure in the polymer melt. A structural model with an interesting 3- fold symmetry in the packing of the side chains around the rigid aromatic main chain, and the packing of these chains into fibrils is proposed. The liquid crystalline behavior of poly(DTD DD) makes it possible to melt process it at low temperatures without thermal degradation. This is a noteworthy advantage for the use of poly(DTD DD) as a high strength, readily processable, yet biodegradable polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real-time observation of morphological transformations in II-VI semiconducting nanobelts via environmental transmission electron microscopy

It has been observed that wurtzite II–VI semiconducting nanobelts transform into single-crystal, periodically branched nanostructures upon heating. The mechanism of this novel transformation has been elucidated by heating II–VI nanobelts in an environmental transmission electron microscope (ETEM) in oxidizing, reducing and inert atmospheres while observing their structural changes with high spatial resolution. The interplay of surface reconstruction of high-energy surfaces of the wurtzite phase and environment-dependent anisotropic chemical etching of certain crystal surfaces in the branching mechanism of nanobelts has been observed. Understanding of structural and chemical transformations of materials via in situ microscopy techniques and their role in designing new nanostructured materials is discussed.

36 MATERIALS SCIENCE↗

Bulk and Nanocrystalline Cesium Lead-Halide Perovskites as Seen by Halide Magnetic Resonance

Lead-halide perovskites increasingly mesmerize researchers because they exhibit a high degree of structural defects and dynamics yet nonetheless offer an outstanding (opto)electronic performance on par with the best examples of structurally stable and defect-free semiconductors. This highly unusual feature necessitates the adoption of an experimental and theoretical mindset and the reexamination of techniques that may be uniquely suited to understand these materials. Surprisingly, the suite of methods for the structural characterization of these materials does not commonly include nuclear magnetic resonance (NMR) spectroscopy. The present study showcases both the utility and versatility of halide NMR and NQR (nuclear quadrupole resonance) for probing the structure and structural dynamics of CsPbX 3 (X = Cl, Br, I), in both bulk and nanocrystalline forms. The strong quadrupole couplings, which originate from the interaction between the large quadrupole moments of, e.g., the 35 Cl, 79 Br, and 127 I nuclei, and the local electric-field gradients, are highly sensitive to subtle structural variations, both static and dynamic. The quadrupole interaction can resolve structural changes with accuracies commensurate with synchrotron X-ray diffraction and scattering. It is shown that space-averaged site-disorder is greatly enhanced in the nanocrystals compared to the bulk, while the dynamics of nuclear spin relaxation indicates enhanced structural dynamics in the nanocrystals. The findings from NMR and NQR were corroborated by ab initio molecular dynamics, which point to the role of the surface in causing the radial strain distribution and disorder. These findings showcase a great synergy between solid-state NMR or NQR and molecular dynamics simulations in shedding light on the structure of soft lead-halide semiconductors.

36 MATERIALS SCIENCE↗

Bridging length scales in organic mixed ionic–electronic conductors through internal strain and mesoscale dynamics

Understanding the structural and dynamic properties of disordered systems at the mesoscale is crucial. This is particularly important in organic mixed ionic-electronic conductors (OMIECs), which undergo significant and complex structural changes when operated in an electrolyte. Here, in this study, we investigate the mesoscale strain, reversibility and dynamics of a model OMIEC material under external electrochemical potential using operando X-ray photon correlation spectroscopy. Our results reveal that strain and structural hysteresis depend on the sample's cycling history, establishing a comprehensive kinetic sequence bridging the macroscopic and microscopic behaviours of OMIECs. Furthermore, we uncover the equilibrium and non-equilibrium dynamics of charge carriers and material-doping states, highlighting the unexpected coupling between charge carrier dynamics and mesoscale order. These findings advance our understanding of the structure-dynamics-function relationships in OMIECs, opening pathways for designing and engineering materials with improved performance and functionality in non-equilibrium states during device operation. Understanding mesoscale structure and dynamics in organic mixed ionic-electronic conductors is crucial. Mesoscale strain kinetics and structural hysteresis have been studied, and they uncover the coupling between charge carrier dynamics and mesoscale order in organic mixed ionic-electronic conductors.

36 MATERIALS SCIENCE↗

Colossal photostructural changes in chalcogenide glasses: Athermal photoinduced polymerization in As{sub x}S{sub 100-x} bulk glasses revealed by near-bandgap Raman scattering

Near-bandgap Raman scattering was used to induce and study photostructural changes in As{sub x}S{sub 100-x} bulk glasses (5{<=}x{sub As}{<=}40) revealing a new photoinduced polymerization effect. Raman spectra were recorded also in off-resonant conditions allowing for a detailed comparison between the 'equilibrium' glass structure and the metastable one induced by illumination. It is shown that in S-rich glasses, structural changes involve the athermal scission of S{sub 8} rings and their polymerization to S{sub n} chains. The fraction of bonds involved in this effect is surprisingly high, being one order of magnitude higher than the corresponding fractions reported up to now in photostructural studies in chalcogenide glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ X-ray diffraction of silicate liquids and glasses under dynamic and static compression to megabar pressures

Properties of liquid silicates under high-pressure and high-temperature conditions are critical for modeling the dynamics and solidification mechanisms of the magma ocean in the early Earth, as well as for constraining entrainment of melts in the mantle and in the present-day core–mantle boundary. In this paper, we present in situ structural measurements by X-ray diffraction of selected amorphous silicates compressed statically in diamond anvil cells (up to 157 GPa at room temperature) or dynamically by laser-generated shock compression (up to 130 GPa and 6,000 K along the MgSiO 3 glass Hugoniot). The X-ray diffraction patterns of silicate glasses and liquids reveal similar characteristics over a wide pressure and temperature range. Beyond the increase in Si coordination observed at 20 GPa, we find no evidence for major structural changes occurring in the silicate melts studied up to pressures and temperatures exceeding Earth’s core mantle boundary conditions. This result is supported by molecular dynamics calculations. Our findings reinforce the widely used assumption that the silicate glasses studies are appropriate structural analogs for understanding the atomic arrangement of silicate liquids at these high pressures.

58 GEOSCIENCES↗

CHARACTERIZATION OF TRANSITIONS IN THE SOLAR WIND PARAMETERS

The distinction between fast and slow solar wind streams and the dynamically evolved interaction regions is reflected in the characteristic fluctuations of both the solar wind and the embedded magnetic field. High-resolution magnetic field data from the Ulysses spacecraft have been analyzed. The observations show rapid variations in the magnetic field components and in the magnetic field strength, suggesting a structured nature of the solar wind at small scales. The typical sizes of fluctuations cover a broad range. If translated to the solar surface, the scales span from the size of granules ({approx}10{sup 3} km) and supergranules ({approx}10{sup 4} km) on the Sun down to {approx}10{sup 2} km and less. The properties of the short time structures change in the different types of solar wind. While fluctuations in fast streams are more homogeneous, slow streams present a bursty behavior in the magnetic field variances, and the regions of transition are characterized by high levels of power in narrow structures around the transitions. The probability density functions of the magnetic field increments at several scales reveal a higher level of intermittency in the mixed streams, which is related to the presence of well localized features. It is concluded that, apart from the differences in the nature of fluctuations in flows of different coronal origin, there is a small-scale structuring that depends on the origin of streams themselves but it is also related to a bursty generation of the fluctuations.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-Destructive, Three-Dimensional Imaging of Processes in the Rhizosphere Utilizing High Energy Photons

Soil structure, which can be described as the aggregation and distribution of pore spaces, regulates carbon, nutrient, and water cycling across the Earth system. Yet the inability to make quantitative, dynamic, in situ measurements of soil structure and rhizosphere carbon flow has prevented meaningful incorporation of soil structural processes into Earth System Models (ESMs). The key limitations are: (i) Lack of scale integration between micron-scale soil structure and ecosystem-scale models, (ii) Poor functional linkage between soil structural properties and biogeochemical processes, and (iii) Absence of dynamic 3D measurements of rhizosphere structural changes and carbon transformations. To address these challenges, we developed a new integrated positron emission tomography (PET) - microcomputed tomography (CT) imaging platform that enables the first 4D (spatial 3D and time), non-invasive, quantitative imaging of carbon allocation and rhizosphere structural dynamics in living plants and intact soils. The system combines: • Rhizo-PET (R-PET): a high-resolution positron emission tomography scanner optimized for 11 CO 2 tracing in plant roots. • a-Se micro-CT: a high-contrast, high-spatial resolution CT system based on amorphous selenium (a-Se) direct conversion technology, enabling micron-scale visualization of soil structure and root–soil interfaces. Together, these advances allow us to quantify how carbon exudates move, transform, and stabilize within the rhizosphere, directly informing missing processes in BER-relevant carbon cycle models.

42 ENGINEERING↗

H2 Production Through the Water-gas Shift Reaction: An In situ Time-resolved X-ray Diffraction Investigation of Manganese OMS-2 Catalyst

Manganese oxide octahedral molecular sieve (OMS-2) catalyst prepared by the reflux method was investigated for hydrogen generation via the water-gas shift reaction. Catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), The Brunauer-Emmett-Teller (BET) surface area and determination of average oxidation state (AOS). The OMS-2 catalyst showed very good catalytic activity for the water-gas shift reaction to generate hydrogen under laboratory conditions. An in situ study was conducted to monitor the structural changes in the catalyst during the water-gas shift reaction using synchrotron radiation-based time-resolved X-ray diffraction (TR-XRD). During the water-gas shift reaction, the mixed valent OMS-2 catalyst undergoes a structural transformation to form Mn{sub 2}O{sub 3} and finally to form MnO. The study showed that OMS-2 catalysts can be used as inexpensive catalysts for hydrogen generation.

08 HYDROGEN↗

Soil-related developments of the Biome-BGCMuSo v6.2 terrestrial ecosystem model

Terrestrial biogeochemical models are essential tools to quantify climate–carbon cycle feedback and plant–soil relations from local to global scale. In this study, a theoretical basis is provided for the latest version of the Biome-BGCMuSo biogeochemical model (version 6.2). Biome-BGCMuSo is a branch of the original Biome-BGC model with a large number of developments and structural changes. Earlier model versions performed poorly in terms of soil water content (SWC) dynamics in different environments. Moreover, lack of detailed nitrogen cycle representation was a major limitation of the model. Since problems associated with these internal drivers might influence the final results and parameter estimation, additional structural improvements were necessary. In this paper the improved soil hydrology as well as the soil carbon and nitrogen cycle calculation methods are described in detail. Capabilities of the Biome-BGCMuSo v6.2 model are demonstrated via case studies focusing on soil hydrology, soil nitrogen cycle, and soil organic carbon content estimation. Soil-hydrology-related results are compared to observation data from an experimental lysimeter station. The results indicate improved performance for Biome-BGCMuSo v6.2 compared to v4.0 (explained variance increased from 0.121 to 0.8 for SWC and from 0.084 to 0.46 for soil evaporation; bias changed from -0.047 to -0.007 m 3 m -3 for SWC and from -0.68 to -0.2 mm d -1 for soil evaporation). Simulations related to nitrogen balance and soil CO 2 efflux were evaluated based on observations made in a long-term field experiment under crop rotation. The results indicated that the model is able to provide realistic nitrate content estimation for the topsoil. Soil nitrous oxide (N 2 O) efflux and soil respiration simulations were also realistic, with overall correspondence with the observations (for the N 2 O efflux simulation bias was between -0.13 and -0.1 mgNm -2 d -1 , and normalized root mean squared error (NRMSE) was 32.4 %–37.6 %; for CO 2 efflux simulations bias was 0.04–0.17 gCm -2 d -1 , while NRMSE was 34.1 %–40.1 %). Sensitivity analysis and optimization of the decomposition scheme are presented to support practical application of the model. The improved version of Biome-BGCMuSo has the ability to provide more realistic soil hydrology representation as well as nitrification and denitrification process estimation, which represents a major milestone.

58 GEOSCIENCES↗

High-pressure Structural Stability of Multiferroic Hexagonal RMnO3 (R=Y Ho Lu)

Structural changes in RMnO{sub 3} (R = Y, Ho, Lu) under high pressure were examined by synchrotron x-ray diffraction methods at room temperature. Compression occurs more readily in the ab plane than along the c axis. With increased pressure, a pressure-induced hexagonal to orthorhombic phase transition was observed starting at {approx}22 GPa for Lu(Y)MnO{sub 3}. When the pressure is increased to 35 GPa, a small volume fraction of Lu(Y)MnO{sub 3} is converted to the orthorhombic phase and the orthorhombic phase is maintained on pressure release. High-pressure infrared absorption spectroscopy and Mn K-edge near-edge x-ray absorption spectroscopy confirm that the hexagonal P6{sub 3}cm structure is stable below {approx}20 GPa and the environment around the Mn ion is not changed. Shifts in the unoccupied p-band density of states with pressure are observed in the Mn K-edge spectra. A schematic pressure-temperature phase diagram is given for the small ion RMnO{sub 3} system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure structural stability of multiferroic hexagonal RMnO3 (R=Y, Ho, Lu)

Structural changes in RMnO{sub 3} (R= Y, Ho, Lu) under high pressure were examined by synchrotron x-ray diffraction methods at room temperature. Compression occurs more readily in the ab plane than along the c axis. With increased pressure, a pressure-induced hexagonal to orthorhombic phase transition was observed starting at {approx}22 GPa for Lu(Y)MnO{sub 3}. When the pressure is increased to 35 GPa, a small volume fraction of Lu(Y)MnO{sub 3} is converted to the orthorhombic phase and the orthorhombic phase is maintained on pressure release. High-pressure infrared absorption spectroscopy and Mn K-edge near-edge x-ray absorption spectroscopy confirm that the hexagonal P6{sub 3}cm structure is stable below {approx}20 GPa and the environment around the Mn ion is not changed. Shifts in the unoccupied p-band density of states with pressure are observed in the Mn K-edge spectra. A schematic pressure-temperature phase diagram is given for the small ion RMnO{sub 3} system.

36 MATERIALS SCIENCE↗

Interstitial and substitutional zirconium in SrTiO3

We investigate Zr in SrTiO3 (STO) as a model for nuclear waste forms in which the fission product Sr90 eventually decays to stable Zr through beta emission. The transformation of a divalent into a tetravalent constituent is expected to affect the long-term structural and chemical stability of this solid. Computational methods of electronic structure theory, specifically the density functional theory (DFT) within the supercell model, are used to predict the thermodynamic stability and electronic states of interstitial and Sr- or Ti-substituted Zr atoms in the STO lattice. Native defects such as vacancies and antisites are also considered. When Zr replaces Sr, its most stable configuration is to simply occupy the Sr site (instead of, for example, replacing a Ti and displacing the Ti to the Sr site.) For Zr added to the lattice, its most stable configuration is to replace a Ti, making a ZrTi impurity plus a Ti interstitial (as opposed to the Zr just remaining as an interstitial atom.) ZrSr is predicted to be a double electron donor, ZrTi is electrically inactive and interstitial Zr and Ti are predicted to be quadruple donors, with all donor levels in the conduction band. ZrSr and the tetravalent interstitials are all predicted to increase the crystal volume, and the interstitials also are predicted to lead to a tetragonal distortion of the lattice. Experiments with injection of Zr atoms into STO qualitatively confirm these predictions of crystal structural changes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Conformational heterogeneity in closed and open states of the KcsA potassium channel in lipid bicelles

The process of ion channel gating—opening and closing—involves local and global structural changes in the channel in response to external stimuli. Conformational changes depend on the energetic landscape that underlies the transition between closed and open states, which plays a key role in ion channel gating. For the prokaryotic, pH-gated potassium channel KcsA, closed and open states have been extensively studied using structural and functional methods, but the dynamics within each of these functional states as well as the transition between them is not as well understood. In this study, we used solution nuclear magnetic resonance (NMR) spectroscopy to investigate the conformational transitions within specific functional states of KcsA. We incorporated KcsA channels into lipid bicelles and stabilized them into a closed state by using either phosphatidylcholine lipids, known to favor the closed channel, or mutations designed to trap the channel shut by disulfide cross-linking. A distinct state, consistent with an open channel, was uncovered by the addition of cardiolipin lipids. Using selective amino acid labeling at locations within the channel that are known to move during gating, we observed at least two different slowly interconverting conformational states for both closed and open channels. The pH dependence of these conformations and the predictable disruptions to this dependence observed in mutant channels with altered pH sensing highlight the importance of conformational heterogeneity for KcsA gating.

60 APPLIED LIFE SCIENCES↗