Search NASA⌕ Search

SEARCH · Search NASA

Results for “theoretical developments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

A theoretical and experimental study of wood planer noise and its control

A combined analytical and experimental study of wood planer noise is made and the results applied to the development of practical noise control techniques. The dominant mechanisms of sound generation are identified and an analysis is presented which accurately predicts the governing levels of noise emission. Planing operations in which the length of the board is much greater than the width are considered. The dominant source of planer noise is identified as the board being surfaced, which is set into vibration by the impact of cutterhead knives. This is determined from studies made both in the laboratory and in the field concerning the effect of board width on the resulting noise, which indicate a six decibel increase in noise level for each doubling of board width. The theoretical development of a model for board vibration defines the vibrational field set up in the board and serves as a guide for cutterhead redesign.

Stewart, J. S.↗
DOE OSTI2019

Many-body effects in transport and energy transfer

Many-body physics is common in defining responses of nanoscale to external perturbations such as bias, optical driving, temperature gradient. When applied to open systems these perturbations lead to matter and energy transfer between the system and its surroundings (baths) and/or cause intra-system dynamics. While many different theoretical techniques have been developed to describe system responses, not all of them are convenient (or even appropriate) when applied at nanoscale. Traditional theoretical techniques are either based on kinetic schemes (e.g., Redfield-Lindblad quantum master equation) or utilize quasiparticle description (e.g., single-particle scattering theory, input-output formalism, standard nonequilibrium Green’s functions technique). The former fails to account for quantum mechanics of the system-bath interface and may fail qualitatively when used in open interacting systems. The latter is inconvenient when many-body states description of the system is preferable, which is usual, e.g., in molecular optical spectroscopy. This project was devoted to development of new nonequilibrium Green’s function (NEGF) techniques and application of standard and many-body flavors of the NEGF to description of charge and energy transport, optical response, nonadiabatic molecular dynamics, and thermodynamics of nanoscale devices in general, and, in particular, of single-molecule junctions. In particular, Hubbard NEGF (new many-body flavor of the NEGF) was introduced as a new technique especially convenient in treatment of optoelectronic experiments in single-molecule junctions and useful in discussion of bias induced nuclear dynamics in junctions. The research also led to further technique developments and applications beyond the timing of this Award.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1979

Vortex development on slender missiles at supersonic speeds

A theoretical and experimental effort has been made to develop a vortex-prediction capability on circular and noncircular missiles at supersonic speeds. Predicted vortex patterns are computed by two linear-theory computer codes. One calculates the strengths and initial locations of the vortices, and the other calculates their trajectories. A short color motion picture has been produced from the calculations to illustrate the predicted vortex patterns on a typical missile. Experimental vapor-screen photographs are presented to show the longitudinal development of the vortices on a fin-control missile. Comparisons are made between these data and the predicted vortices to assess the accuracy of the theory. The theory appears to be fairly accurate in predicting the number, locations, and relative strengths of individual vortices which develop over the missile, but cannot predict vortex sheets or diffuse vorticity whenever they occur.

Allen, J. M.↗
DOE OSTI2022

Ta compressibility to 20+ Mbar

Developing techniques for experimentally constraining equation of state (EOS) models for important programmatic materials under extreme conditions is vital for advancing our modeling and predictive capabilities. Tantalum is a frequently used standard material for both calibration and testing, and this report describes our work to both measure Ta compressibility to very high pressures and densities using the Ramp Compression Equation of State platform on the National Ignition Facility (NIF). Using a series of seven shots, increasing in peak pressure with each shot, we have made absolute measurements of the compressibility of Ta along the ramp compression path up to 2.3 TPa. Previous experimental measurements constrained the cold compressibility up to ~400 GPa, and there is a spread in the EOS models above that pressure. To improve communication and collaboration between the experimental team and the EOS development group, these new data, along with other experimental and theoretical constraints, were used to develop a Ta equation of state table, M73000. This report first describes the experimental measurements made at the NIF, and then discusses the construction of the EOS model. The ramp compression data can be found in tabular form in Appendix A. Appendix B contains some additional experimental details. In Appendix C we include some additional details on the EOS modeling. At the end of this document, we have attached a detailed report on the NIF ramp compression platform itself and in the main text referenced specific sections for additional details.

36 MATERIALS SCIENCE↗
NASA NTRS1952

Development of a laminar boundary layer behind a suction point

A theoretical investigation is made of the development of a laminar boundary layer behind a suction slot that is assumed to cut off part of the boundary layer without exerting any sink effect. The development, which is approximate, is based on the heat conduction equation. The heat conduction equation enters the analysis through a linearization of the Prandtl-Mises form of the boundary-layer equation.

EQUATIONS - BOUNDARY LAYER↗
DOE OSTI2019

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Abstract Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e − site −1 s −1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg −1 Ir , which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.

Xiao, Meiling↗
DOE OSTI2019

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Abstract Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e − site −1 s −1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg −1 Ir , which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.

Xiao, Meiling↗
NASA NTRS2000

Comment on "Heterodyne Lidar Returns in the Turbulent Atmosphere: Performance Evaluation of Simulated Systems"

The explanation for the difference between simulation and the zero-order theory for heterodyne lidar returns in a turbulent atmosphere proposed by Belmonte and Rye is incorrect. The theoretical expansion is not developed under a square- law-structure function approximation (random wedge atmosphere). Agreement between the simulations and the zero-order term of the theoretical expansion is produced for the limit of statistically independent paths (bi-static operation with large transmitter-receiver separation) when the simulations correctly include the large-scale gradients of the turbulent atmosphere.

Frehlich, Rod↗
DOE OSTI2019

Theoretical and computational studies on the scattering of radio frequency waves by fluctuations

The practical and economic viability of tokamak fusion reactors depends, in a significant way, on the efficiency of radio frequency (RF) waves to deliver energy and momentum to the plasma in the core of the reactor. Among the various attributes of RF waves is their ability to heat magnetically confined plasmas, induce plasma currents in an effort to achieve steady state, and modify the current profile so as to control plasma instabilities like the neoclassical tearing modes. The RF electromagnetic waves, excited by antenna structures placed near the wall of a tokamak, have to propagate through the turbulent plasma in the scrape-off layer (SOL) along their path to the core plasma. While the propagation and damping of RF waves in the core is reasonably well understood, the same is not true for RF propagation through the SOL. In present day fusion devices, the radial width of the SOL is of the order of a few centimeters. In ITER and in future fusion reactors this width will be of the order of tens of centimeters. Any deleterious effects on RF waves due to plasma turbulence in the SOL has to be properly understood in order to optimize the delivery of RF energy and momentum into the core. This paper is on a multi-pronged approach that is being pursued to quantify the effect of SOL plasma on RF waves. The SOL is composed of coherent filamentary, or blob like, structures and incoherent fluctuations. For coherent structures a full-wave theoretical model has been developed. This model is used to benchmark computational codes that are subsequently used to study general distribution of filaments, thereby extending the range of the theoretical formulation. For incoherent fluctuations, a common approach towards quantifying the effects of turbulence is the Kirchhoff technique. This technique is based on physical optics and the wave fields at any point on a spatially varying surface are approximated to be the same as the fields on a tangent plane at that point. The results from the theoretical analysis are compared with full-wave numerical simulations for incoherent fluctuations. The final part of these studies is to construct the effective permittivity of a turbulent plasma that is a mix of coherent and incoherent fluctuations. Towards this end, the ``effective medium approximation'' is being used to construct the permittivity of the turbulent plasma that will be used in full-wave and physical optics studies of scattering. All these approaches are distinctly different from previous studies on the RF wave propagation through turbulent plasmas. The theory and computations discussed in this paper apply to RF waves in any frequency range and for arbitrary variations in density, and reveal new and important physical insights into the scattering of RF waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2003

Improved Prediction of Momentum and Scalar Fluxes Using MODIS Imagery

There are remote sensing and science objectives. The remote sensing objectives are: To develop and test a theoretical method for estimating local momentum aerodynamic roughness length, z(sub 0m), using satellite multispectral imagery. To adapt the method to the MODIS imagery. To develop a high-resolution (approx. 1km) gridded dataset of local momentum roughness for the continental United States and southern Canada, using MODIS imagery and other MODIS derived products. The science objective is: To determine the sensitivity of improved satellite-derived (MODIS-) estimates of surface roughness on the momentum and scalar fluxes, within the context of 3-D atmospheric modeling.

Crago, Richard D.↗
NASA NTRS1988

Theoretical and Experimental Studies of the Transonic Flow Field and Associated Boundary Conditions near a Longitudinally-Slotted Wind-Tunnel Wall

A theoretical examination of the slotted-wall flow field is conducted to determine the appropriate wall pressure drop (or boundary condition) equation. This analysis improves the understanding of the fluid physics of these types of flow fields and helps in evaluating the uncertainties and limitations existing in previous mathematical developments. It is shown that the resulting slotted-wall boundary condition contains contributions from the airfoil-induced streamline curvature and the non-linear, quadratic, slot crossflow in addition to an often neglected linear term which results from viscous shearing in the slot. Existing and newly acquired experimental data are examined in the light of this formulation and theoretical developments.

Everhart, Joel Lee↗
DOE OSTI2018

Mn- and N- doped carbon as promising catalysts for oxygen reduction reaction: Theoretical prediction and experimental validation

Development of platinum group metal (PGM)-free as well as iron-free electrocatalysts is imperative to achieve low-cost and long-term durability of polymer electrolyte membrane fuel cells. Here in this paper, we combined computational and experimental studies to investigate the mechanism, activity, and durability of Mn and N co-doped carbon (denoted as Mn-N-C) as promising catalysts for oxygen reduction reaction (ORR) in challenging acid medium. The first-principles density functional theory calculations predict that it is favorable for O 2 to be reduced into H 2 O via four-electron pathway on MnN 4 sites embedded in carbon layer. Using the reaction energies calculated from DFT, microkinetic analysis predicts that the MnN 4 sites could catalyze ORR with a half-wave potential only 60 mV lower than that of Pt (111) and 80 mV lower than that of the FeN 4 sites embedded in carbon layer, assuming the same density of active sites in the catalysts. Motivated by the computational prediction, we synthesized a Mn-N-C catalyst using a polymer (i.e., polyaniline-PANI) hydrogel precursors via a high temperature approach. Structural characterization indicates that atomically dispersed Mn sites coordinated with N are very likely formed in the catalyst. Electrochemical measurements show that the synthesized Mn-N-C catalyst can promote four-electron ORR with a catalytic activity in acids comparable to that of the Fe-N-C catalyst prepared using the same procedure. More importantly, the Mn-N-C catalyst exhibits superior potential cyclic stability, only losing 20 mV after 10000 cycles (0.6 to 1.0 V in O 2 saturated electrolyte). In comparison, the Fe-N-C catalyst would loss 80 mV after only 5000 cycles under the same testing conditions. Our computational and experimental results strongly suggest that the Mn and N co-doped carbon could be promising high-performance catalysts for ORR in acidic medium.

25 ENERGY STORAGE↗
NASA NTRS1972

Vibration and loads in hingeless rotors. Volume 1: Theoretical analyses

Analytic methods are developed for calculating blade loads and shaft-transmitted vibratory forces in stiff bladed hingeless rotors operating at advance ratios from mu = .3 to mu = 2.0. Calculated shaft harmonic moments compared well with experimental values when the blade first flap frequency was in the region of two-per-revolution harmonic excitation. Calculated blade bending moment azimuthal distributions due to changes in cyclic pitch agreed well with experiment at radial stations near the blade root at values of the ratio of first flap frequency to rotor rotation rate from 1.5 to 5.0. At stations near the blade tip good agreement was only obtained at the higher values of frequency ratio.

Watts, G. A.↗
NASA NTRS1998

X-ray Diffraction Studies of the Structure and Thermochemistry of Alkaline-Earth Oxide-Coated Thermionic Cathodes

NASA LeRC has a broad, active cathode technology development program in which both experimental and theoretical studies are being employed to further development of thermionic cathodes for use as electron sources in vacuum devices for communications and other space applications. One important type of thermionic cathode under development is the alkaline-earth oxide-coated (BaO, SrO, CaO) cathode. Significant improvements in the emission characteristics of this cathode have been obtained through modification of the chemical composition and morphology of the oxide coating, with the best result thus far coming from the addition of In2O3 and Sc2O3. Whereas the In2O3 produces a finer, more uniform particle structure, the exact chemical state and role of the Sc2O3 in the emission enhancement is unknown. The purpose of this cooperative agreement is to combine the studies of the surface chemistry and electron emission at NASA LeRC of chemically modified oxide coatings with a study of the thermochemistry and crystal structure using X-ray diffraction equipment and expertise at Clark Atlanta University (CAU). The study at CAU is intended to provide the description and understanding of the structure and thermochemistry needed for further improvement and optimization of the modified coatings. A description of the experimental procedure, preliminary X-ray diffraction test results, together with the design of an ultrahigh vacuum chamber necessary for high temperature thermochemistry studies will be presented.

Karikari, E. K.↗
NASA NTRS1998

Use of Microgravity to Control the Microstructure of Eutectics

This grant began in June of 1996. Its long term goal is to be able to control the microstructure of directionally solidified eutectic alloys, through an improved understanding of the influence of convection. The primary objective of the present projects is to test hypotheses for the reported influence of microgravity on the microstructure of three fibrous eutectics (MnBi-Bi, InSb-NiSb, Al3Ni-Al). A secondary objective is to determine the influence of convection on the microstructure of other eutectic alloys. Two doctoral students and a masters student supported as a teaching assistant were recruited for this research. Techniques were developed for directional solidification of MnBi-Bi eutectics with periodic application of current pulses to produce an oscillatory freezing rate. Image analysis techniques were developed to obtain the variation in MnBi fiber spacing, which was found to be normally distributed. The mean and standard deviation of fiber spacing were obtained for several freezing conditions. Eighteen ampoules were prepared for use in the gradient freeze furnace QUELD developed at Queen's University for use in microgravity. Nine of these ampoules will be solidified soon at Queen's in a ground-based model. We hope to solidify the other nine in the QUELD that is mounted on the Canadian Microgravity Isolation Mount on MIR. Techniques are being developed for directional solidification of the Al-Si eutectic at different freezing rates, with and without application of accelerated crucible rotation to induce convection. For the first time, theoretical methods are being developed to analyze eutectic solidification with an oscillatory freezing rate. In a classical sharp-interface model, we found that an oscillatory freezing rate increases the deviation of the average interfacial composition from the eutectic, and increases the undercooling of the two phases by different amounts. This would be expected to change the volume fraction solidifying and the fiber spacing. Because of difficulties in tracking the freezing interfaces of the two solid phases, a phase-field model is also being developed. A paper demonstrating application of phase field methods to periodic structures has been submitted for publication.

Wilcox, William R.↗
NASA NTRS1984

Windblown sand on Venus - Preliminary results of laboratory simulations

Small particles and winds of sufficient strength to move them have been detected from Venera and Pioneer-Venus data and suggest the existence of aeolian processes on Venus. The Venus wind tunnel (VWT) was fabricated in order to investigate the behavior of windblown particles in a simulated Venusian environment. Preliminary results show that sand-size material is readily entrained at the wind speeds detected on Venus and that saltating grains achieve velocities closely matching those of the wind. Measurements of saltation threshold and particle flux for various particle sizes have been compared with theoretical models which were developed by extrapolation of findings from Martian and terrestrial simulations. Results are in general agreement with theory, although certain discrepancies are apparent which may be attributed to experimental and/or theoretical-modeling procedures. Present findings enable a better understanding of Venusian surface processes and suggest that aeolian processes are important in the geological evolution of Venus.

Greeley, R.↗
NASA NTRS2005

Characteristics Of Ferroelectric Logic Gates Using a Spice-Based Model

A SPICE-based model of an n-channel ferroelectric field effect transistor has been developed based on both theoretical and empirical data. This model was used to generate the I-V characteristic of several logic gates. The use of ferroelectric field effect transistors in memory circuits is being developed by several organizations. The use of FFETs in other circuits, both analog and digital needs to be better understood. The ability of FFETs to have different characteristics depending on the initial polarization can be used to create logic gates. These gates can have properties not available to standard CMOS logic gates, such as memory, reconfigurability and memory. This paper investigates basic properties of FFET logic gates. It models FFET inverter, NAND gate and multi-input NAND gate. The I-V characteristics of the gates are presented as well as transfer characteristics and timing. The model used is a SPICE-based model developed from empirical data from actual Ferroelectric transistors. It simulates all major characteristics of the ferroelectric transistor, including polarization, hysteresis and decay. Contrasts are made of the differences between FFET logic gates and CMOS logic gates. FFET parameters are varied to show the effect on the overall gate. A recodigurable gate is investigated which is not possible with CMOS circuits. The paper concludes that FFETs can be used in logic gates and have several advantages over standard CMOS gates.

MacLeod, Todd C.↗
NASA NTRS1977

Prediction of laminar and turbulent boundary layer flow separation in V/STOL engine inlets

The paper provides a theoretical description of the development of the boundary layer on the lip and diffuser surface of a subsonic inlet at arbitrary operating conditions of mass flow rate, freestream velocity and incidence angle. Both laminar separation on the lip and turbulent separation in the diffuser are discussed. The agreement of the theoretical results with model experimental data illustrates the capability of the theory to predict separation. The effects of throat Mach number, inlet size, and surface roughness on boundary-layer development and separation are illustrated.

Chou, D. C.↗