Search NASA⌕ Search

SEARCH · Search NASA

Results for “time resolution data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Detector pixel calibration of time-of-flight neutron diffractometers accelerated by machine learning

Modern time-of-flight neutron diffractometers at spallation neutron source are equipped with two dimensional detectors with fine pixelations. The flight path of neutrons from the moderator to the sample and to the detector needs to be precisely calibrated at detector pixel level using standard powders so the diffraction data from all the detector pixels can be correctly time-focused to produce high resolution diffraction peaks. The number of pixels can reach to millions which makes a single-pixel calibration process time-consuming, or even impossible, with conventional fitting routine. Here we presented a machine learning aided calibration process via a “training and predict” process by training machine learning models with the relations between the individual pixel time-of-flight diffraction pattern and fitted diffraction constant. The training models take a portion of the available pixels to predict the diffraction constants precisely and rapidly for massive pixel diffraction patterns.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

University of Miami Coupled Model (UMCM) for Hurricanes Ike and Sandy

The University of Miami Coupled Model (UMCM) is a coupled model that integrates atmospheric, wave, and ocean components to produce wind, wave, and current data. Atmospheric data is produced using the [Weather Research and Forecasting model](https://www.mmm.ucar.edu/weather-research-and-forecasting-model) (WRF), Wave data is produced using the [University of Miami Wave Model](https://umwm.org/) (UMWM), While ocean current data is produced using the [HYbrid Coordinate Ocean Model](https://www.hycom.org/) (HYCOM). The time resolution for each model run is as follows: Hurricane Ike -> 1 sample/hour from 9/8/2008 12:00:00 UTC to 9/12/2008 6:00:00 UTC -> 1 sample/10 minutes from 9/12/2008 6:00:00 UTC to 9/13/2008 9:00:00 UTC Hurricane Sandy -> 1 sample/10 minutes from 10/28/2012 00:10:00 UTC to 10/31/2012 00:00:00 UTC

Array↗

Cross-correlation analysis of the AE index and the interplanetary magnetic field Bz component.

A cross-correlation study between magnetospheric activity (the AE index) and the southward-directed component of the interplanetary magnetic field (IMF) is made for a total of 792 hours (33 days) with a time resolution of about 5.5 min. The peak correlation tends to occur when the interplanetary data are shifted approximately 40 min later with respect to the AE index data. Cross-correlation analysis is conducted on some idealized wave forms to illustrate that this delay between southward turning of the IMF and the AE index should not be interpreted as being the duration of the growth phase.

Meng, C.-I.↗

New capabilities for the Wallops Island SPANDAR

Systems incorporated into the SPANDAR to increase spatial resolution and data processing capabilities are described. They include a minicomputer that performs real-time formatting of video data, rapid antenna scan control, and control of a digital integrator; a frequency diversity technique for faster accumulation of independent video samples; the on-line calibration system for insertion of high and low calibration signals during every PRF interval; and utilization of a large capacity, high speed computer. The resultant data will be used to create statistical thunderstorm models for designing microwave communications systems.

Kropfli, R. A.↗

Far infrared spectrophotometry of Jupiter and Saturn

Infrared spectral measurements of Mars, Jupiter, and Saturn were obtained from 100 to 470 kaysers and, by taking Mars as a calibration source, brightness temperatures of Jupiter and Saturn were determined with approximately 5 kayser resolution. Internal luminosities were determined from the data and are reported to be approximately 8 times 10 to the minus tenth power of the sun's luminosity for Jupiter and approximately 3.6 times 10 to the minus tenth power of the sun's luminosity for Saturn. Comparison of data with spectra predicted by models suggests the need for an opacity source in addition to gaseous hydrogen and ammonia to help explain Jupiter's observed spectrum in the vicinity of 250 kaysers.

Erickson, E. F.↗

Application of future remote sensing systems to irrigation

Area estimates of irrigated crops and knowledge of crop type are required for modeling water consumption to assist farmers, rangers, and agricultural consultants in scheduling irrigation for distributed management of crop yields. Information on canopy physiology and soil moisture status on a spatial basis is potentially available from remote sensors, so the questions to be addressed relate to: (1) timing (data frequency, instantaneous and integrated measurement); and scheduling (widely distributed spatial demands); (2) spatial resolution; (3) radiometric and geometric accuracy and geoencoding; and (4) information/data distribution. This latter should be overnight, with no central storage, onsite capture, and low cost.

Miller, L. D.↗

Visible charge-coupled device (CCD) focal plane design considerations for multispectral applications

The typical Multispectral Linear Array (MLA) Instrument mission would be to gather high-resolution, radiometrically accurate earth resources data in several spectral bands over a prolonged period of time. These bands would include the visible (VIS), near infrared (NIR) and short wavelength infrared. Silicon charge-coupled imaging devices (CCDs) can be assembled into contiguous pixel focal planes which will cover the VIS/NIR region and operate reliably for several years in a space environment. A typical MLA focal plane would have approximately 12,000 pixels, with a pixel-to-pixel registration requirement on the order of + or - 0.1 pixel. The technology to assemble such focal planes has been developed and is described. The problem of polarization sensitivity associated with certain types of focal plane assemblies is addressed. Radiation effects on CCDs are also discussed, and a practical solution to the problem through the use of shielding is described.

Sadowski, H.↗

Water vapor variance measurements using a Raman lidar

Because of the importance of atmospheric water vapor variance, we have analyzed data from the NASA/Goddard Raman lidar to obtain temporal scales of water vapor mixing ratio as a function of altitude over observation periods extending to 12 hours. The ground-based lidar measures water vapor mixing ration from near the earth's surface to an altitude of 9-10 km. Moisture profiles are acquired once every minute with 75 m vertical resolution. Data at each 75 meter altitude level can be displayed as a function of time from the beginning to the end of an observation period. These time sequences have been spectrally analyzed using a fast Fourier transform technique. An example of such a temporal spectrum obtained between 00:22 and 10:29 UT on December 6, 1991 is shown in the figure. The curve shown on the figure represents the spectral average of data from 11 height levels centered on an altitude of 1 km (1 plus or minus .375 km). The spectra shows a decrease in energy density with frequency which generally follows a -5/3 power law over the spectral interval 3x10 (exp -5) to 4x10 (exp -3) Hz. The flattening of the spectrum for frequencies greater than 6x10 (exp -3) Hz is most likely a measure of instrumental noise. Spectra like that shown in the figure are calculated for other altitudes and show changes in spectral features with height. Spectral analysis versus height have been performed for several observation periods which demonstrate changes in water vapor mixing ratio spectral character from one observation period to the next. The combination of these temporal spectra with independent measurements of winds aloft provide an opportunity to infer spatial scales of moisture variance.

Evans, K.↗

Geocenter location and variations in earth orientation using global positioning system measurements

We have studied the use of GPS ground and flight tracking data to measure short-period earth orientation variations and changes in geocenter location. Comparisons between GPS-estimated earth rotation variations and those calculated from ocean tide models suggest that observed subdaily variations in earth rotation are dominated by oceanic tidal effects. Our preliminary GPS estimates for geocenter location agree with an independent satellite laser ranging estimates to 10-15 cm. Covariance analysis predicts that temporal resolution of GPS estimates for earth orientation and geocenter improves significantly when data collected from low earth-orbiting satellites as well as from ground sites are combined. The low-earth GPS tracking data enhance the accuracy and resolution for measuring high-frequency global geodynamical signals over time scales less than 1 day.

Malla, R. P.↗

Towards developing an analytical procedure of defining the equatorial electrojet for correcting satellite magnetic anomaly data

Analysis of the total magnetic intensity MAGSAT data has identified and characterized the variability of ionospheric current effects as reflected in the geomagnetic field as a function of longitude, elevation, and time (daily as well as monthly variations). This analysis verifies previous observations in POGO data and provides important boundary conditions for theoretical studies of ionospheric currents. Furthermore, the observations have led to a procedure to remove these temporal perturbations from lithospheric MAGSAT magnetic anomaly data based on 'along-the-dip-latitude' averages from dawn and dusk data sets grouped according to longitudes, time (months), and elevation. Using this method, high-resolution lithospheric magnetic anomaly maps have been prepared of the earth over a plus or minus 50 deg latitude band. These maps have proven useful in the study of the structures, nature, and processes of the lithosphere.

Ravat, Dhananjay↗

High Accuracy Evaluation of the Finite Fourier Transform Using Sampled Data

Many system identification and signal processing procedures can be done advantageously in the frequency domain. A required preliminary step for this approach is the transformation of sampled time domain data into the frequency domain. The analytical tool used for this transformation is the finite Fourier transform. Inaccuracy in the transformation can degrade system identification and signal processing results. This work presents a method for evaluating the finite Fourier transform using cubic interpolation of sampled time domain data for high accuracy, and the chirp Zeta-transform for arbitrary frequency resolution. The accuracy of the technique is demonstrated in example cases where the transformation can be evaluated analytically. Arbitrary frequency resolution is shown to be important for capturing details of the data in the frequency domain. The technique is demonstrated using flight test data from a longitudinal maneuver of the F-18 High Alpha Research Vehicle.

Morelli, Eugene A.↗

Tunable Diode Laser Heterodyne Spectrophotometry of Ozone

Tunable diode laser heterodyne spectrophotometry (TDLHS) has been used to make extremely high resolution (less than 0.0005/ cm) solar spectra in the 9.6 micron ozone band. Observations have shown that a signal-to-noise ratio of 95 : 1 (35% of theoretical) for an integration time of 1/8 second can be achieved at a resolution of 0.0005 wavenumbers. The spectral data have been inverted to yield a total column amount of ozone, in good agreement with that. measured at the nearby National Oceanographic and Atmospheric Administration (NOAA) ozone monitoring facility in Boulder, Colorado.

Fogal, P. F.↗

The Effects of Laterite and Associated Terrain Components on PBMR Response in HAPEX-Sahel

Terrain characteristics such as roughness and vegetation have been shown to significantly affect the interpretation of microwave brightness temperatures (T(B)s) for mapping soil moisture. This study, a part of the 1992 HAPEX-Sahel experiment (Hydrologic Atmospheric Pilot Experiment in the Sahel), aimed to determine the effects of laterite and associated terrain components (i.e. vegetation, soil, and exposed water bodies) on the T(B) response of the Pushbroom Microwave Radiometer (PBMR, L-band, 21 cm wavelength), using the NS001 Thematic Mapper Simulator data as a surrogate for ground data. Coincident PBMR and NS001 data acquired from the high altitude (about 1500 m) long transect flights were processed to obtain TBs and radiances, respectively. The transects covered a range of moisture conditions. For this preliminary evaluation, no atmospheric corrections were applied, and the data sets were aligned by matching the acquisition times of the data records. NS001 pixels (about 4 m) were averaged to approximate the resolution of the PBMR (about 450 m), before their flight line data were compared. The laterite plateaux were found to have a surprisingly strong effect on the PBMR T(B) response. T(B) variations along the flight line could largely be explained by a combination of density and dielectric properties of laterite. The effect of surface moisture was distinguishable from the laterite effect, with the distinction apparently related to the occurrence of ephemeral pools of water after rainfall. Model simulated T(B)s agreed reasonably well with the observed T(B)s.

Teng, William L.↗

Profiles of Gamma-Ray Bursts and Their Component Pulses

One physically informative regularity of their otherwise heterogeneous ensemble, is that many Gamma-Ray Bursts consist of well defined pulses. To objectively quantify the temporal structure of BATSE bursts, we have developed an automatic modeling procedure that separates overlapping pulses and determines the energy-dependence of the pulse-shape parameters. No binning of photon arrival times is needed, so when applied to time-tagged events (TTE) the procedure captures variability information down to the shortest time scales present in the raw data. Maximizing the Bayesian likelihood function Pr(data/model) yields estimates of the model parameters, including the number of pulses present, and allows intercomparison of models of different forms. As with any nonlinear optimization, good initial guesses are crucial to avoid convergence to undesirable local minima. We find excellent initial pulse decompositions by wavelet-denoising a cumulative distribution of the raw photon arrival data; differentiation then gives a time profile mostly free of the systematic effects of degraded resolution (as in ordinary Fourier smoothing) and binning. We present statistical information on pulse rise-time, decay-time, peakedness, and amplitudes, plus their energy dependences - both within a single burst and for a large ensemble of bursts.

Scargle, Jeff D.↗

Stochastic Models of Tropical Rain-Rate Fields

Because of the extreme variability of rain rate in space and time and the difficulties with remote sensing methods of measuring rain rates, accurate determination of rainfall over large areas and time periods has long been a problem for hydrologists, meteorogists, and climatologists. A number of statistical models of rain have been developed in order to investigate the impact of rain variability on satellite remote sensing methods, validation of satellite rain products, and generation of rain maps with accompanying error estimates. These models may be useful in examining 'sub-grid scale' issues in representing precipitation in numerical mdoels. A stochastic model will first be described which can generate time-dependent high-resolution spatial rain fields with space and time correlations similar to those seen in rain data, as well as representing the presence of areas with zero rain rate and log-normally distributed rain rates where there is rain. A simpler model derived from this, formulated in the spectral domain, seems to imply fractal-like rain statistics at small scales when fit to rain data.

Bell, Thomas L.↗

Galileo Infrared Observations of the Shoemaker Levy 9 G and R Fireballs and Splash

The Galileo spacecraft was fortuitously situated for a direct view of the impacts of comet Shoemaker(ka)evy 9 in Jupiter's atmosphere and measurements were recorded by the Near Infrared Mapping Spectrometer (NIMS) instrument for several of the impact events. Seventeen discrete wavelength channels were used between 0.7 to 5.0 microns, obtained with a time resolution of 5 seconds. Two phases of the impact phenomena are found in the data: the initial fireball, which was evident for one minute, and subsequent fallback of impact ejecta onto the atmosphere, starting six minutes after fireball initiation.

Shoemaker Levy↗

Inexpensive Implementation of Many Strain Gauges

It has been proposed to develop arrays of strain gauges as arrays of ordinary metal film resistors and associated electronic readout circuitry on printed circuit boards or other suitable substrates. This proposal is a by-product of a development of instrumentation utilizing metal film resistors on printed-circuit boards to measure temperatures at multiple locations. In the course of that development, it was observed that in addition to being sensitive to temperature, the metal film resistors were also sensitive to strains in the printed-circuit boards to which they were attached. Because of the low cost of ordinary metal film resistors (typically <$0.01 apiece at 2007 prices), the proposal could enable inexpensive implementation of arrays of many (e.g., 100 or more) strain gauges, possibly concentrated in small areas. For example, such an array could be designed for use as a computer keyboard with no moving parts, as a device for sensing the shape of an object resting on a surface, or as a device for measuring strains at many points on a mirror, a fuel tank, an airplane wing, or other large object. Ordinarily, the effect of strain on resistance would be regarded as a nuisance in a temperature-measuring application, and the effect of temperature on resistance would be regarded as a nuisance in a strain-measuring application. The strain-induced changes in resistance of the metal film resistors in question are less than those of films in traditional strain gauges. The main novel aspect of present proposal lies in the use of circuitry affording sufficient sensitivity to measure strain plus means for compensating for the effect of temperature. For an array of metal film resistors used as proposed, the readout circuits would include a high-accuracy analog-to-digital converter fed by a low noise current source, amplifier chain, and an analog multiplexer chain. Corrections would be provided by use of high-accuracy calibration resistors and a temperature sensor. By use of such readout circuitry, it would be possible to read the resistances of as many as 100 fixed resistors in a time interval of 1 second at a resolution much greater than 16 bits. The readout data would be processed, along with temperature calibration data, to deduce the strain on the printed-circuit board or other substrate in the areas around the resistors. It should also be possible to also deduce the temperature from the readings.

Berkun, Andrew C.↗

Role of MODIS Vegetation Phenology Products in the ForWarn System for Monitoring of Forest Disturbances in the Conterminous United States

This presentation discusses MODIS vegetation phenology products used in the ForWarn Early Warning System (EWS) tool for near real time regional forest disturbance detection and surveillance at regional to national scales. The ForWarn EWS is being developed by the USDA Forest Service NASA, ORNL, and USGS to aid federal and state forest health management activities. ForWarn employs multiple historical land surface phenology products that are derived from MODIS MOD13 Normalized Difference Vegetation Index (NDVI) data. The latter is temporally processed into phenology products with the Time Series Product Tool (TSPT) and the Phenological Parameter Estimation Tool (PPET) software produced at NASA Stennis Space Center. TSPT is used to effectively noise reduce, fuse, and void interpolate MODIS NDVI data. PPET employs TSPT-processed NDVI time series data as an input, outputting multiple vegetation phenology products at a 232 meter resolution for 2000 to 2011, including NDVI magnitude and day of year products for seven key points along the growing season (peak of growing season and the minima, 20%, and 80% of the peak NDVI for both the left and right side of growing season), cumulative NDVI integral products for the most active part of the growing season and sequentially across the growing season at 8 day intervals, and maximum value NDVI products composited at 24 day intervals in which each product date has 8 days of overlap between the previous and following product dates. MODIS NDVI phenology products are also used to compute nationwide NRT forest change products refreshed every 8 days. These include percent change in forest NDVI products that compare the current NDVI from USGS eMODIS products to historical MODIS MOD13 NDVI. For each date, three forest change products are produced using three different maximum value NDVI baselines (from the previous year, three previous years, and all previous years). All change products are output with a rainbow color table in which forests with the most severe NDVI decreases are assigned hot colors (yellow to red) and forests with prominent NDVI increases are assigned cold colors (blue tones). All mentioned products have been integrated as data layers into ForWarn s geospatial data viewer known as the U.S. Forest Change Assessment Viewer (FCAV). The latter is used to view and assess the context of the mentioned forest change products with respect to ancillary data layers, such as land cover, elevation, hydrologic features, climatic data, storm data, aerial disturbance surveys, fire data, and land ownership. The FCAV also includes a temporal NDVI profiler for viewing phenological change in multi-year NDVI associated with known or suspected regionally apparent forest disturbances (e.g., from fire and insects). ForWarn forest change products have been used to detect, track, and assess several biotic and abiotic regional forest disturbance events across the country, including ephemeral and longer lasting damage from storms, drought, and insects. Such change products are most effective for viewing severe disturbances affecting multiple MODIS pixels. MODIS vegetation phenology products contribute vital current information on forest conditions to the ForWarn system and this role is expected to grow as these products are refined and derivative products are added.

Spruce, Joseph P.↗