Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMUNICATION NETWORKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Distributed Software-Defined Network Architecture for Smart Grid Resilience to Denial-of-Service Attacks

An important challenge for smart grid security is designing a secure and robust smart grid communications architecture to protect against cyber-threats, such as Denial-of-Service (DoS) attacks, that can adversely impact the operation of the power grid. Researchers have proposed using Software Defined Network frameworks to enhance cybersecurity of the smart grid, but there is a lack of benchmarking and comparative analyses among the many techniques. In this work, a distributed three-controller software-defined networking (D3-SDN) architecture, benchmarking, and comparative analysis with other techniques is presented. The selected distributed flat SDN architecture divides the network horizontally into multiple areas or clusters, where each cluster is handled by a single Open Network Operating System (ONOS) controller. A case study using the IEEE 118-bus system is provided to compare the performance of the presented ONOS-managed D3-SDN, against the POX controller. In addition, the proposed architecture outperforms a single SDN controller framework by a tenfold increase in throughput; a reduction in latency of > 20%; and an increase in throughput of approximately 11% during the DoS attack scenarios.

Agnew Jr., Dennis↗

Communication: Nanoscale ion fluctuations in Nafion polymer electrolyte

Ion conduction mechanisms and the nanostructure of ion conduction networks remain poorly understood in polymer electrolytes which are used as proton-exchange-membranes (PEM) in fuel cell applications. Here we study nanoscale surface-potential fluctuations produced by Brownian ion dynamics in thin films of low-hydration Nafion™, the prototype PEM. Images and power spectra of the fluctuations are used to derive the local conductivity-relaxation spectrum, in order to compare with bulk behavior and hopping-conductivity models. Conductivity relaxation-times ranged from hours to milliseconds, depending on hydration and temperature, demonstrating that the observed fluctuations are produced by water-facilitated hydrogen-ion hopping within the ion-channel network. Due to the small number of ions probed, non-Gaussian statistics of the fluctuations can be used to constrain ion conduction parameters and mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decentralized Optimal Dispatch of Photovoltaic Inverters in Residential Distribution Systems

Summary form only given. Decentralized methods for computing optimal real and reactive power setpoints for residential photovoltaic (PV) inverters are developed in this paper. It is known that conventional PV inverter controllers, which are designed to extract maximum power at unity power factor, cannot address secondary performance objectives such as voltage regulation and network loss minimization. Optimal power flow techniques can be utilized to select which inverters will provide ancillary services, and to compute their optimal real and reactive power setpoints according to well-defined performance criteria and economic objectives. Leveraging advances in sparsity-promoting regularization techniques and semidefinite relaxation, this paper shows how such problems can be solved with reduced computational burden and optimality guarantees. To enable large-scale implementation, a novel algorithmic framework is introduced - based on the so-called alternating direction method of multipliers - by which optimal power flow-type problems in this setting can be systematically decomposed into sub-problems that can be solved in a decentralized fashion by the utility and customer-owned PV systems with limited exchanges of information. Since the computational burden is shared among multiple devices and the requirement of all-to-all communication can be circumvented, the proposed optimization approach scales favorably to large distribution networks.

14 SOLAR ENERGY↗

Cyber Network Design for Secondary Frequency Regulation: A Spectral Approach

We present a preliminary theoretical framework based on spectral graph theory that captures how the cyber topology of a distributed secondary frequency control scheme impacts the stability, optimality, and transient performance of our power system as a cyber-physical network. We show that a collection of polynomials defined in terms of the cyber and physical Laplacian eigenvalues encode information on the interplay between cyber and physical networks. It is demonstrated that to understand the impact of adding cyber connectivity, one should separate the low-damping and high-damping regimes. Although adding cyber connectivity always improves the performance for high-damping systems, it is not the case for low-damping scenarios. Based on the theoretical study, we discuss how a good cyber network should be designed. Our empirical study shows that for practical systems, the number of communication channels that is needed to achieve near-optimal performance is usually less than twice the number of buses.

24 POWER TRANSMISSION AND DISTRIBUTION↗

TOPS2 - Towards Optimal Petascale Simulations

Our goal in this project was to design scalable numerical algorithms needed by SciDAC applications that adapt to use evolving hardware resources as efficiently as possible. Our primary challenge is minimizing communication costs, where communication means moving data either between levels of a memory hierarchy (L1 cache to L2 cache to main memory etc.) or between processors over a network. Floating point rates are improving exponentially faster than bandwidth, which is improving exponentially faster than latency. So our goal is to minimize communication. We describe our progress in this area, both for direct and iterative linear algebra. In both areas we have (1) identified lower bounds on the amount of communication (measured both by the number of words moved and the number of messages) required to perform these algorithms, (2) analyzed existing algorithms, which by and large do not attain these lower bounds, and (3) identified or invented new algorithms that do attain them, and evaluated their speedups, which can be quite large.

97 MATHEMATICS AND COMPUTING↗

External beam planning module of Eclipse for external beam radiation therapy

Eclipse is a 3-dimensional (3D) treatment planning system for radiation therapy offered by Varian Medical Systems, Inc. The system has the network connectivity for the electronic transfer of image datasets and digital data communication among different equipment. The scope of this project for this special issue of Medical Dosimetry on 3D treatment planning systems is the assessment of planning tools in the external beam planning module of Eclipse to generate optimized treatment plans for patients undergoing external beam radiation therapy. This treatment planning system is relatively mature to be able to generate (1) simple treatment plans, (2) conformal radiation therapy plans, (3) static intensity-modulated radiation therapy (IMRT) plans, (4) volumetric-modulated arc therapy (VMAT) plans, and (5) treatment plans for electron beam therapy. The treatment planning tools are relatively plentiful to assist in the radiation therapy treatment planning. Some new features have been incorporated in the latest version and are helpful for making high-quality treatment plans. However, the location of the tools is not intuitive, and hence, familiarity with the user interface is essential to the efficient use of the treatment planning system. In addition, there are a number of dose algorithms available for the computation of dose distributions. The understanding of each dose computation algorithm is essential for the optimal use of this treatment planning system.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Scaling Resolution of Gigapixel Whole Slide Images Using Spatial Decomposition on Convolutional Neural Networks

Gigapixel images are prevalent in scientific domains ranging from remote sensing, and satellite imagery to microscopy, etc. However, training a deep learning model at the natural resolution of those images has been a challenge in terms of both, overcoming the resource limit (e.g. HBM memory constraints), as well as scaling up to a large number of GPUs. In this paper, we trained Residual neural Networks (ResNet) on 22,528 x 22,528-pixel size images using a distributed spatial decomposition method on 2,304 GPUs on the Summit Supercomputer. We applied our method on a Whole Slide Imaging (WSI) dataset from The Cancer Genome Atlas (TCGA) database. WSI images can be in the size of 100,000 x 100,000 pixels or even larger, and in this work we studied the effect of image resolution on a classification task, while achieving state-of-the-art AUC scores. Moreover, our approach doesn't need pixel-level labels, since we're avoiding patching from the WSI images completely, while adding the capability of training arbitrary large-size images. This is achieved through a distributed spatial decomposition method, by leveraging the non-block fat-tree interconnect network of the Summit architecture, which enabled GPU-to-GPU direct communication. Finally, detailed performance analysis results are shown, as well as a comparison with a data-parallel approach when possible.

Tsaris, Aristeidis (aris)↗

A Latency Tolerant Runtime System for Mass Market Computer Systems

Grappa is a latency tolerant runtime system for mass market computer systems comprised of multiple nodes having x86 multicore processors and infiniband interconnect. Grappa is designed to enable in-memory irregular applications written in the C++ programming language to scale up on multiprocessor systems. Grappa addresses the load balance, communication, and synchronization challenges posed by running applications that do not partition evenly across large systems. Two mechanisms are essential to its success: fast task switching and message aggregation. Fast task switching enables processors to tolerate communication and synchronization delays; aggregation sustains high bandwidth on low injection rate networks.

Source record↗

Evaluating Trade-offs in Potential Exascale Interconnect Topologies

This study looks at the high-level trade-offs for interconnect architectures that are likely to be available in HPC machines in the 2021-2022 timeframe. The study uses multiple simulation models to look at the effects of varying machine size, injection bandwidth and topology for a selected set of benchmark communication patterns. The studies show the sensitivity of various applications to these network parameters. This study can help inform decisions on node size versus number of nodes, which topology is most efficient for our applications, how much injection bandwidth to provision, etc. These simulations only look at interconnects with maximally configured global bandwidth, and studies of networks configured with less will be the subject of future milestones.

97 MATHEMATICS AND COMPUTING↗

Modular Security Apparatus for Managing Distributed Cryptography for Command-and-Control Messages on Operational Technology Networks (Module-OT)

Module-OT is a bump- in- the- wire solution acting as a secure conduit for data between devices or systems across a network. Using the latest in open-source cryptographic libraries, all defined communications undergo authentication, authorization, and encryption. The core system can be easily installed through industry standard processes, and the use of popular open-source packages allows for it to be customizable customized by the developer community or deployed in unique embedded environments.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Bringing Control System User Interfaces to the Web

With the evolution of web based technologies, especially HTML5 [1], it becomes possible to create web-based control system user interfaces (UI) that are cross-browser and cross-device compatible. This article describes two technologies that facilitate this goal. The first one is the WebOPI [2], which can seamlessly display CSS BOY [3] Operator Interfaces (OPI) in web browsers without modification to the original OPI file. The WebOPI leverages the powerful graphical editing capabilities of BOY and provides the convenience of re-using existing OPI files. On the other hand, it uses generic JavaScript and a generic communication mechanism between the web browser and web server. It is not optimized for a control system, which results in unnecessary network traffic and resource usage. Our second technology is the WebSocket-based Process Data Access (WebPDA) [4]. It is a protocol that provides efficient control system data communication using WebSocket [5], so that users can create web-based control system UIs using standard web page technologies such as HTML, CSS and JavaScript. WebPDA is control system independent, potentially supporting any type of control system.

Chen, Xihui↗

A Latency Tolerant Runtime System for Mass Market Computer Systems

Grappa is a latency tolerant runtime system for mass market computer systems comprised of multiple nodes having x86 multicore processors and infiniband interconnect. Grappa is designed to enable in-memory irregular applications written in the C++ programming language to scale up on multiprocessor systems. Grappa addresses the load balance, communication, and synchronization challenges posed by running applications that do not partition evenly across large systems. Two mechanisms are essential to its success: fast task switching and message aggregation. Fast task switching enables processors to tolerate communication and synchronization delays; aggregation sustains high bandwidth on low injection rate networks.

Source record↗

Distributed gather/scatter operations across a network of memory nodes

Devices, methods, and systems for distributed gather and scatter operations in a network of memory nodes. A responding memory node includes a memory; a communications interface having circuitry configured to communicate with at least one other memory node; and a controller. The controller includes circuitry configured to receive a request message from a requesting node via the communications interface. The request message indicates a gather or scatter operation, and instructs the responding node to retrieve data elements from a source memory data structure and store the data elements to a destination memory data structure. The controller further includes circuitry configured to transmit a response message to the requesting node via the communications interface. The response message indicates that the data elements have been stored into the destination memory data structure.

97 MATHEMATICS AND COMPUTING↗

DragonView: Toward Understanding Network Interference in Dragonfly-based Supercomputers

Acquiring and maintaining high performance computing systems represents a substantial, long term investment. Therefore, it is paramount to optimize their utilization in order to maximize the return on investment and the impact on science and engineering. In this context, network congestion and inter-job interference are a major challenge as they can lead to significant systemwide performance degregation. This is especially pertinent in shared interconnects such as the dragonfly network, in which resources are shared by multiple jobs. Since many large-scale applications are communication-bound, a few communication heavy applications can have a large impact on the performance of all jobs and decrease the overall system throughput. In this paper, we describe a web-based visual analytics environment to study congestion and inter-job interference on dragonfly networks. The system enables network architects, system administrators and application developers to explore the potential impact of machine configuration, job placement policies and routing algorithms by visualizing and comparing ensembles of simulated workloads and real world data. We focus on the design of the system and describe the challenges, design decisions and the final implementation. Finally, we present two detailed case studies of prototypical analysis sessions by our stakeholders aimed at exploring the implications of different workloads and machine configurations using ensembles of network simulations.

97 MATHEMATICS AND COMPUTING↗

Modeling Large-Scale Slim Fly Networks Using Parallel Discrete-Event Simulation

As supercomputers approach exascale performance, the increased number of processors translates to an increased demand on the underlying network interconnect. We present that the slim fly network topology, a new low-diameter, low-latency, and low-cost interconnection network, is gaining interest as one possible solution for next-generation supercomputing interconnect systems. In this article, we present a high-fidelity slim fly packet-level model leveraging the Rensselaer Optimistic Simulation System (ROSS) and Co-Design of Exascale Storage (CODES) frameworks. We validate the model with published work before scaling the network size up to an unprecedented 1 million compute nodes and confirming that the slim fly observes peak network throughput at extreme scale. In addition to synthetic workloads, we evaluate large-scale slim fly models with real communication workloads from applications in the Design Forward program with over 110,000 MPI processes. We show strong scaling of the slim fly model on an Intel cluster achieving a peak network packet transfer rate of 2.3 million packets per second and processing over 7 billion discrete events using 128 MPI tasks. Enabled by the strong performance capabilities of the model, we perform a detailed application trace and routing protocol performance study. Lastly, through analysis of metrics such as packet latency, hop count, and congestion, we find that the slim fly network is able to leverage simple minimal routing and achieve the same performance as more complex adaptive routing for tested DOE benchmark applications.

97 MATHEMATICS AND COMPUTING↗

Control coordination in inverter‐based microgrids using AoI‐based 5G schedulers

Abstract A coordinated set point automatic adjustment with correction enabled (C‐SPAACE) framework that uses 5G communication for real‐time control coordination between inverter‐based resources (IBR) in microgrids is proposed. Utilising slicing capability, 5G offers low‐latency communication to C‐SPAACE under normal conditions. However, given the multitude of power grid use cases, a certain 5G slice for C‐SPAACE may have access only to limited radio spectrum resources, which if not managed well, greatly undermines the communication needs of C‐SPAACE framework. Thus, optimally scheduling the available spectrum resources among IBRs in a sliced 5G network‐based C‐SPAACE framework becomes a critical problem. To address this issue, the authors utilise a novel age of information (AoI) metric and designs an AoI‐based 5G scheduler to provide low‐latency communication to C‐SPAACE. Following this, a co‐simulation environment is designed using PSCAD/EMTDC and Python to simulate a microgrid supported by 5G communication. Time‐domain simulation case studies are performed using the proposed co‐simulation environment to evaluate the performance of C‐SPAACE using 5G with both AoI‐based and other baseline (non‐AoI) schedulers.

Choudhury, Biplav↗

Optomechanical transducers for quantum-information processing

We discuss the implementation of optical quantum networks where the interface between stationary and photonic qubits is realized by optomechanical transducers [K. Stannigel et al., Phys. Rev. Lett. 105, 220501 (2010)]. This approach does not rely on the optical properties of the qubit and thereby enables optical quantum communication applications for a wide range of solid-state spin- and charge-based systems. We present an effective description of such networks for many qubits and give a derivation of a state transfer protocol for long-distance quantum communication. We also describe how to mediate local on-chip interactions by means of the optomechanical transducers that can be used for entangling gates. We finally discuss experimental systems for the realization of our proposal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗