Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel cladding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Active Interrogation Using Electronic Neutron Generators for Nuclear Safeguards Applications

Active interrogation, a measurement technique which uses a radiation source to probe materials and generate unique signatures useful for characterizing those materials, is a powerful tool for assaying special nuclear material. The most commonly used technique for performing active interrogation is to use an electronic neutron generator as the probe radiation source. Exploiting the unique operating characteristics of these devices, including their monoenergetic neutron emissions and their ability to operate in pulsed modes, presents a number of options for performing prompt and delayed signature analyses using both photon and neutron sensors. A review of literature in this area shows multiple applications of the active neutron interrogation technique for performing nuclear nonproliferation measurements. Some examples include measuring the plutonium content of spent fuel, assaying plutonium residue in spent fuel hull claddings, assaying plutonium in aqueous fuel reprocessing process streams, and assaying nuclear fuel reprocessing facility waste streams to detect and quantify fissile material. This paper discusses the historical use of this technique and examines its context within the scope and challenges of next-generation nuclear fuel cycles and advanced concept nuclear fuel cycle facilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Sister Rod Destructive Examinations (FY23) Appendix B: Segmentation, Defueling, Metallographic Data and Total Cladding Hydrogen

As a part of the DOE-NE High Burnup Spent Fuel Data Project, Oak Ridge National Laboratory (ORNL) is performing destructive examinations (DEs) of high burnup (HBU) (>45 GWd/MTU) spent nuclear fuel (SNF) rods from the North Anna Nuclear Power Station operated by Dominion Energy. The SNF rods, called sister rods or sibling rods are all HBU and include four different kinds of fuel rod cladding: standard Zircaloy-4 (Zirc-4), low-tin (LT) Zirc-4, ZIRLO ® , and M5 ® . The DEs are being conducted to obtain a baseline of the HBU rod’s condition before dry storage and are focused on understanding overall SNF rod strength and durability. Both composite fuel and defueled cladding will be tested to derive material properties. Although the data generated can be used for multiple purposes, one primary goal for obtaining the post-irradiation examination data and associated measured mechanical properties is to support SNF dry storage licensing and relicensing activities by (1) addressing identified knowledge gaps and (2) enhancing the technical basis for post-storage transportation, handling, and subsequent disposition of the SNF. This report documents the status of the ORNL Phase 1 DE activities related to: Rough segmentation (RS), Defueling (DEF), DE.02 optical microscopy (MET), and DE.03, cladding total hydrogen measurements. It is a cumulative update to the FY22 status report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Study on Modeling of Nuclear Fuel End Drop during a Hypothetical Accident

It is well known that shell elements have been used to model the cladding of single nuclear fuel pins. These have been used, for example, to analyze the response of a fuel assembly by assuming that all fuel pins in a fuel assembly deform in the same pattern. It is increasingly significant to model the entire fuel assembly in order to capture more realistically the behavior of each individual nuclear fuel during a hypothetical accident in a manner that can account for interactions among single pins. However, modeling each individual fuel pin in an entire fuel assembly using shell elements will result in models with large amount of elements and degrees of freedom that take correspondingly larger amount of computational times to execute. Therefore, modeling the nuclear fuel assembly with beam elements may become an option. This paper presents the results of a set of analysis with the LS-DYNA finite element software that investigated the differences and similarities of modeling nuclear fuel assemblies using either shell elements or beam elements. This study provides additional insights on the appropriateness of using beam element models of the fuel pins in the simulation of a hypothetical accident. In this study, two single pin models, a single pin model using shell elements and a single beam model using beam elements, are constructed to analyze end drop scenarios with the LS-DYNA code. Each model is then analyzed for a 19 ft end drop scenario (linear behavior) and 30 ft end drop scenario (non-linear behavior). Comparisons are made between the results obtained with the single pin shell model and with the single pin beam model to study the differences and similarities resulting from the two modeling approaches. In this study, a B and W 15x15 PWR fuel is analyzed for both 30 ft and 19 ft end hypothetical accident drops using both single pin finite element model with shell elements and beam elements for the fuel cladding. It is found that for the 19 ft end drop, the difference in the Max/Min total axial strains is about 12% between the two models. For the 30 ft end drop, the maximum total axial strains calculated with both models is similar, and a difference of about 12% is observed for the minimum total axial strains calculated by the two models. Advantages of the single pin shell model are that it permits consideration of internal pressures and may capture local buckling. Therefore, use of beam elements to model the fuel cladding needs to take into account the possible significance of local buckling and internal pressurization for the problem being analyzed. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Plane-Strain Tension Testing of ATF FeCrAl Cladding (Progress Report)

Performance of advanced accident-tolerant fuel (ATF) claddings must be assessed under all relevant scenarios, including normal and off-normal operating conditions, as well as during a reactivity-initiated accident (RIA). During RIA, the fuel pellet may expand and cause significant loads on cladding, a condition known as pellet cladding mechanical interaction (PCMI), which may even lead to cladding failure. This report describes the fiscal year (FY) 2020 research activities and results from the development of separate-effects testing for ATF cladding candidate iron-chromium-aluminum (FeCrAl) tube specimens under loading conditions expected during RIA/PCMI events. To assess material performance under PCMI, a high strain rate burst test, often termed the modified burst test (MBT), is commonly employed. However, execution of such a test in a hot cell requires significant research. To overcome the complexities of performing MBTs in a hot-cell environment on irradiated samples, a plane-strain tension (PST) test was proposed by several authors as an alternative approach for PCMI testing. A new fixture was developed so that PST specimens could be tested using a more accommodating design for hot-cell manipulators. This report presents the PST fixture design, evaluates the possibility of modifying the specimen geometry, and discusses experimental results with unirradiated Al 6061 and FeCrAl tubes at various lengths. Furthermore, this report discusses the relevance and compatibility of the PST results to RIA scenarios and compares the PST and MBT results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

BWR Spent Nuclear Fuel Acquisition and Testing to Support DOE-NE High Burnup Spent Fuel Data Project

The Office of Spent Fuel and Waste Disposition (SFWD) within the US Department of Energy (DOE) Office of Nuclear Energy (NE) established the Spent Fuel and Waste Science and Technology (SFWST) campaign to conduct research and development (R&D) activities related to the storage, transportation, and disposal of spent nuclear fuel (SNF) and high-level radioactive waste. The SFWST program was created within SFWD to address issues of extended or long-term SNF storage and transportation. Some near-term objectives of SFWST are to use a science-based, engineering-driven approach to: Support the enhancement of the technical bases to support the continued safe and secure dry storage of SNF for extended periods; Support the enhancement of the technical bases for retrieving SNF after extended dry storage; Support the enhancement of the technical bases for transporting high burnup (HBU) fuel and transporting low burnup fuel and HBU fuel after dry storage DOE-NE, in partnership with the Electric Power Research Institute, developed the High Burnup Spent Fuel Data Project to perform a large-scale demonstration and laboratory-scale testing of HBU pressurized water reactor (PWR) fuels (exceeding 45 gigawatt-days per metric ton of uranium [GWd/MTU]). Under this project, 25 sister rods—which are rods that have the same design, power histories, and other characteristics—were removed from assemblies at the North Anna Nuclear Power Station and sent to Oak Ridge National Laboratory (ORNL) in January 2016. ORNL performed detailed nondestructive examination (NDE) on all 25 rods. The NDE consisted of visual examinations, gamma and neutron scanning, profilometry and rod length measurements, and eddy current examinations. After completing the NDE, 10 of the sister rods were delivered to Pacific Northwest National Laboratory (PNNL) in a NAC International, Inc. legal-weight truck cask in September 2018 for destructive examination (DE). To date, SFWD work has focused on the PWR fuel that is part of the Sister Rod Test program. No boiling water reactor (BWR) fuel has been tested in the program, and the data needs that were identified for the PWR fuel have not been collected for BWR fuel. The goal to obtain six to nine BWR rods and test them at ORNL will support closing this important data gap. BWR fuel comprises approximately 56% of the total fuel assemblies currently in storage at nuclear power plants in the United States. BWR nuclear fuel and cladding designs and manufacturing are significantly different from PWRs. Differences include the following: BWR fuel pellets are larger than PWR pellets; Variations of Zircaloy-2 (including liners) are used instead of the Zircaloy-4 cladding materials used in PWRs; Clad manufacturing and stress-relief processes are different between PWRs and BWRs; The fuel rod dimensions are different because larger rod diameters and thicker cladding are used in BWRs; BWR fuel typically has lower internal rod pressures and sees vastly different operating conditions than PWR fuel (i.e., two-phase flow); BWR assemblies are “canned,” meaning each assembly is surrounded by a metal fuel channel; BWR cladding is often composed of an inner pure Zr liner that has widely different mechanical properties than the Zircaloy-2 alloy and exhibits a stronger affinity for hydrogen; The BWR SNF generally has more total hydrogen in the cladding/liner than typical PWR fuel; The construction of the PWR and BWR assemblies is vastly different; BWR rods are solidly attached to the assembly nozzles and experience a much different vibration and shock load than PWR rods, which are “floating” within a grid system attached to guide tubes, and the rods sit loosely on the bottom end plates. These numerous differences will affect the way the BWR SNF responds under dry storage preparation processes (e.g., vacuum drying) and during transportation. The results collected in the PWR experimental program must be compared with a subset of similar data collected on BWR SNF to establish a technical basis for whether the larger PWR database is sufficient to bound the BWR SNF end-of-life conditions as is currently assumed for several fuel/clad properties. Changes that occur in both fuel types at HBU could exacerbate any mechanical property differences. As the fuel burnup increases, several changes occur that might affect the performance of the fuel, cladding, and assembly hardware in storage and transportation. These changes include increased cladding corrosion layer thickness, increased cladding hydrogen content, increased cladding creep strains, increased fission gas release, and the formation of the HBU structure at the surface of the fuel pellets. The Nuclear Regulatory Commission (NRC) limits the current maximum rod-averaged burnup to 62 GWd/MTU due to these changes and the lack of data at higher burnups.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Potential Impact of Cladding Wettability on LWR Transient Progression

The US Department of Energy Office of Nuclear Energy (DOE-NE) Advanced Fuels Campaign (AFC) is working closely with the nuclear industry to develop fuel and cladding candidates with potentially enhanced accident tolerance. This type of fuel is also known as accident tolerant fuel (ATF). Two promising cladding material candidates with potentially enhanced accident tolerance are silicon carbide (SiC) and an iron-chromium-aluminum (FeCrAl) alloy. The FeCrAl alloy features significantly enhanced oxidation resistance versus the Zr-based alloys currently used in state-of-the-art light water reactors (LWRs). Thermal-fluid characteristics are a vital element of a holistic engineering evaluation of ATF concepts. One characteristic related to boiling heat transfer is the critical heat flux (CHF). At CHF, the efficacy of heat transfer rapidly degrades and components can heat up rapidly. CHF is the heat flux at which the departure from nucleate boiling (DNB) occurs in PWRs. DNB is directly relevant to the departure from nuclear boiling ratio (DNBR), which is the ratio between the critical heat flux and the actual heat flux. Surface wettability is an important factor that influences CHF. CHF plays a significant role in determining safety margins during normal operation and also in the progression of potential transient or accident scenarios. Significant changes in CHF properties and boiling heat transfer characteristics will impact the progression of transient and accident events and reactor safety characteristics. Additionally, the behavior of the candidate cladding materials post-CHF impacts reactor safety. A brief description of the relationship between cladding material properties and CHF is provided, followed by an analysis of two hypothetical transient scenarios: a super-prompt reactivity-initiated accident (RIA) and an anticipated transient without scram with instability (ATWS-I). The analysis illustrates the potential impact of cladding material properties on safety margins via direct alteration of calculated CHF values. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sister Rod Destructive Examinations (FY20) Appendix B: Segmentation, Defueling, Metallograhic Data and Total Cladding Hydrogen

As a part of the US DOE-NE High Burnup Spent Fuel Data Project, ORNL is performing destructive examinations (DEs) of high burnup (>45 gigawatt days per metric ton uranium) spent nuclear fuel (SNF) rods from the North Anna Nuclear Power Station operated by Dominion Energy. The SNF rods, called the “sister rods,” are all HBU and include four different kinds of fuel rod cladding: standard Zircaloy-4, low-tin Zircaloy-4, ZIRLO®, and M5®. The DEs are being conducted to obtain a baseline of the HBU rod’s condition prior to dry storage and are focused on understanding overall SNF rod strength and durability. Both composite fuel and empty cladding are being tested. While the data generated can be used for multiple purposes, a primary goal for obtaining the post-irradiation examination data and the associated measured mechanical properties is to support SNF dry storage licensing and relicensing activities.This report documents the status of the ORNL Phase 1 DE activities related to: rough segmentation, defueling, optical microscopy, and cladding total hydrogen measurements for 7 Phase 1 sister rods and outlines the DE tasks performed and the data collected to date. The results of these detailed examinations and others are summarized in the Sister Rod DE Status Report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Zircaloy Cladding as Starting Precursor for Ceramic Waste-Forms - 15562

Zircaloy cladding of spent fuel is regular waste-stream related to the process of reprocessing. It remains in the apparatus after spent fuel dissolution. The most common technique of zircaloy cladding treatment is cementation and disposal in metallic containers. In view of the high cost of the cladding material (mainly zirconium), there have been a number of proposals for this material to be recovered and re-used. However, the residual contamination of the claddings following the dissolution of the fuel and the chemical stability of the zirconium militate against any proposal for a recycling process that might be economically reasonable. At the same time there is a lot of information available about synthesis of mineral-like materials based on zirconium for immobilization of long-lived radionuclides. The object of this work was to study experimentally electrochemical dissolution of fuel rod cladding for further obtaining starting precursor for the synthesis of ceramic-waste forms. The results of experiments on electrochemical dissolution of zirconium and zirconium alloy (fuel rod cladding) in nitric acid solutions are presented. The peak dissolution rate of specimens is shown to be observed in dilute nitric acid at elevated temperatures. The rate of dissolution rises with temperature, reaching ∼40-70 mg/cm{sup 2}.h at 90 deg. C. The current yield at this point is 0.6-0.7 g/A.h. The results of analysis of the surface oxide film on specimens and residues formed during dissolution are also presented. An electrochemical dissolution of zircaloy claddings is the common technique for preparation of zirconium solutions to be used for ceramic waste form synthesis. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Steam Oxidation Testing in the Severe Accident Test Station

Since 2011, Oak Ridge National Laboratory (ORNL) has been conducting high temperature steam oxidation testing of candidate alloys for accident tolerant fuel (ATF) cladding. These concepts are designed to enhance safety margins in light water reactors (LWR) during severe accident scenarios. In the US ATF community, the Severe Accident Test Station (SATS) has been evaluating candidate materials (including coatings) since 2012. Compared to the current UO 2 /Zr-based alloy fuel system, alternative cladding materials need to offer slower oxidation kinetics and a smaller enthalpy of oxidation in order to significantly reduce the rate of heat and hydrogen generation in the core during a coolant-limited severe accident. The steam oxidation behavior of candidate materials is a key metric in the evaluation of ATF concepts and also an important input into models. However, prior modeling work of FeCrAl cladding has used incomplete information on the physical properties of FeCrAl. Also, the steam oxidation data being collected at 1200°-1700°C is unique as no prior work has considered steam oxidation of alloys at such high temperatures. In some cases, the results have been difficult to interpret and more fundamental information is needed such as the stability of alumina in flowing steam at 1400°-1500°C. This report summarizes recent work to measure the steam oxidation kinetics of candidate alloys, the evaporation rate of alumina in steam and the development of integral data on FeCrAl compared to conventional Zr-based cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fuel Performance Calculations for FeCrAl Cladding in BWRs

This study expands upon previous neutronics analyses of the reactivity impact of alternate cladding concepts in boiling water reactor (BWR) cores and directs focus toward contrasting fuel performance characteristics of FeCrAl cladding against those of traditional Zircaloy. Using neutronics results from a modern version of the 3D nodal simulator NESTLE, linear power histories were generated and supplied to the BISON-CASL code for fuel performance evaluations. BISON-CASL (formerly Peregrine) expands on material libraries implemented in the BISON fuel performance code and the MOOSE framework by providing proprietary material data. By creating material libraries for Zircaloy and FeCrAl cladding, the thermomechanical behavior of the fuel rod (e.g., strains, centerline fuel temperature, and time to gap closure) were investigated and contrasted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Demonstration of the Coating Analysis Capabilities in BISON

In order to improve the accident tolerance of light water reactor (LWR) fuel, coated cladding materials have been proposed which exhibit much slower oxidation kinetics in high-temperature steam than Zr-alloys. This behavior should decrease the energy release due to oxidation and allow the cladding to remain integral longer in the presence of high-temperature steam, making accident mitigation more likely. In order to determine how these coating materials will adjust the behavior of the Zr-alloy cladding during normal reactor operation, simulations have been performed using the Bison fuel performance code. This analysis focused on modeling and comparing the integral thermo-mechanical performance of coated and uncoated zircaloy cladding with uranium dioxide fuel under normal operating conditions. This analysis demonstrates the ability to model a discrete meshed coating bonded to the cladding exterior and provides a comparison with an uncoated fuel rod. A generic range of coating material properties are implemented given the differences and unknowns regarding the proprietary coating properties used by the vendors. A main-effects analysis was performed to identify trends and sensitivities in how coating material properties affect key fuel performance metrics. Lastly, because residual stresses are expected to form in the coating, arising from the high temperature coating application process and application techniques, an additional analysis was performed to identify the impact of these stresses on the cladding behavior. Future analysis efforts will target more comprehensive documentation of this main effects analysis by sampling the results at the beginning and middle-of-life in order to capture important behavior before and during the onset of gap closure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Postirradiation examination results of several metallic fuel alloys and forms from low burnup AFC irradiations

Several different U based metallic nuclear fuel alloys and forms were irradiated as part of the Advanced Fuels Campaign (AFC) series of irradiation experiments. Results from postirradiation examinations of the AFC-3A and AFC-3B are presented here. In this irradiation, U alloyed with Mo, Zr, and Zr with Pd were investigated. Different geometric forms (solid, annular), smear densities and bonding media (sodium, helium) were also irradiated and evaluated. All fuel forms were irradiated in ferritic-martensitic HT-9 cladding. Examination of the irradiated fuel included neutron radiography, evaluation of the distribution of gamma-ray emitting radionuclides, dimensional inspection, fission gas release analysis, optical microscopy, and chemical analysis. No in-pile failure was observed with this fuel. Neutron radiography, gamma spectrometry, and dimensional inspections indicated the fuel largely performed acceptably. Optical microscopy revealed significant fuel-cladding interaction between the Mo based alloys and the cladding. The Zr based alloys generally performed better although some forms revealed behaviors that present specific fabrication challenges such as tighter fabrication tolerances that will need to be better controlled to match historical U-Zr fuel performance. Furthermore, the addition of Pd as an additive to prevent fuel cladding chemical interaction (FCCI) also appears to present some challenges to fuel performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Engineering-Scale Development/Demonstration of Zirconium Recovery from Used Duel Cladding

Recognizing that the zirconium (Zr) in used nuclear fuel (UNF) cladding is the second largest mass in UNF assemblies, process development studies for the recovery and purification of Zr were initiated and have been in progress at Oak Ridge National Laboratory (ORNL) for the last several years as a major element of waste minimization for advanced nuclear fuel recycle. Together with uranium recovery and recycle, Zr recovery would divert >90% (wt.) of the UNF assemblies from emplacement in a geologic repository by converting the Zr to low-level waste or reuse/recycle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Key results from examinations of seven high burnup pressurized water reactor spent nuclear fuel rods

At present, spent nuclear fuel (SNF) assemblies discharged from US commercial power plants are placed into dry storage following a short cooling time (<10 years) in the plant’s spent fuel pool. The process of packaging the spent fuel into dry-storage canisters includes a drying step to remove residual water from the canister. During the drying process, the fuel rod cladding may reach temperatures as high as 400°C. Oak Ridge National Laboratory (ORNL) is performing destructive examinations of high burnup (HBU) (>45 GWd/MTU) SNF rods to address knowledge and data gaps related to extended interim storage and eventual transportation for disposal. The rods examined include four different kinds of fuel rod cladding: standard Zircaloy-4 (Zirc-4), low-tin (LT) Zirc-4, ZIRLO, and M5. Three rods were subjected to a thermal transient to assess the effects of decay-heat-driven high temperatures expected during vacuum drying of the fuel as it is prepared for interim dry storage. The examinations focus on the composite fuel rod performance, as compared with the performance of defueled rod cladding, and establish the baseline mechanical properties of a fuel rod before interim dry storage. The key results of these examinations are presented, including the measured mechanical and fatigue properties, observations of cladding hydrogen pickup and hydride reorientation effects on rod performance, effects of the simulated drying temperatures on rod performance, and general conclusions of SNF performance in extended interim dry storage and transport. The rods were found to be strong and durable in the expected loading conditions, even considering the formation of radial hydrides associated with vacuum drying. The combined testing provides a broad body of data supporting extended interim storage and transportation performance of HBU spent fuel.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Advanced Fuel/Cladding Testing Capabilities in the ORNL High Flux Isotope Reactor

The ability to test advanced fuels and cladding materials under reactor operating conditions in the United States is limited. The Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) and the newly expanded post-irradiation examination (PIE) capability at the ORNL Irradiated Fuels Examination Laboratory provide unique support for this type of advanced fuel/cladding development effort. The wide breadth of ORNL's fuels and materials research divisions provides all the necessary fuel development capabilities in one location. At ORNL, facilities are available from test fuel fabrication, to irradiation in HFIR under either thermal or fast reactor conditions, to a complete suite of PIEs, and to final product disposal. There are very few locations in the world where this full range of capabilities exists. New testing capabilities at HFIR have been developed that allow testing of advanced nuclear fuels and cladding materials under prototypic operating conditions (i.e., for both fast-spectrum conditions and light-water-reactor conditions). This paper will describe the HFIR testing capabilities, the new advanced fuel/cladding testing facilities, and the initial cooperative irradiation experiment that begins this year.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Theoretical analysis of swelling characteristics of cylindrical uranium dioxide fuel pins with a niobium - 1-percent-zirconium clad

The relations between clad creep strain and fuel volume swelling are shown for cylindrical UO2 fuel pins with a Nb-1Zr clad. These relations were obtained by using the computer code CYGRO-2. These clad-strain - fuel-volume-swelling relations may be used with any fuel-volume-swelling model, provided the fuel volume swelling is isotropic and independent of the clad restraints. The effects of clad temperature (over a range from 118 to 1642 K (2010 to 2960 R)), pin diameter, clad thickness and central hole size in the fuel have been investigated. In all calculations the irradiation time was 500 hours. The burnup rate was varied.

Saltsman, J. F.↗

Pellet Cladding Mechanical Interaction Modeling Using the Extended Finite Element Method

As a brittle material, the ceramic UO2 used as light water reactor fuel experiences significant fracturing throughout its life, beginning with the first rise to power of fresh fuel. This has multiple effects on the thermal and mechanical response of the fuel/cladding system. One such effect that is particularly important is that when there is mechanical contact between the fuel and cladding, cracks that extending from the outer surface of the fuel into the volume of the fuel cause elevated stresses in the adjacent cladding, which can potentially lead to cladding failure. Modeling the thermal and mechanical response of the cladding in the vicinity of these surface-breaking cracks in the fuel can provide important insights into this behavior to help avoid operating conditions that could lead to cladding failure. Such modeling has traditionally been done in the context of finite-element-based fuel performance analysis by modifying the fuel mesh to introduce discrete cracks. While this approach is effective in capturing the important behavior at the fuel/cladding interface, there are multiple drawbacks to explicitly incorporating the cracks in the finite element mesh. Because the cracks are incorporated in the original mesh, the mesh must be modified for cracks of specified location and depth, so it is difficult to account for crack propagation and the formation of new cracks at other locations. The extended finite element method (XFEM) has emerged in recent years as a powerful method to represent arbitrary, evolving, discrete discontinuities within the context of the finite element method. Development work is underway by the authors to implement XFEM in the BISON fuel performance code, and this capability has previously been demonstrated in simulations of fracture propagation in ceramic nuclear fuel. These preliminary demonstrations have included only the fuel, and excluded the cladding for simplicity. This paper presents initial results of efforts to apply XFEM to model stress concentrations induced by fuel fractures at the fuel/cladding interface during pellet cladding mechanical interaction (PCMI). This is accomplished by enhancing the thermal and mechanical contact enforcement algorithms employed by BISON to permit their use in conjunction with XFEM. The results from this methodology are demonstrated to be equivalent to those from using meshed discrete cracks. While the results of the two methods are equivalent for the case of a stationary crack, it is demonstrated that XFEM provides the additional flexibility of allowing arbitrary crack initiation and propagation during the analysis, and minimizes model setup effort for cases with stationary cracks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Preliminary Modeling of Accident Tolerant Fuel Concepts under Accident Conditions

The catastrophic events that occurred at the Fukushima-Daiichi nuclear power plant in 2011 have led to widespread interest in research of alternative fuels and claddings that are proposed to be accident tolerant. Thus, the United States Department of Energy through its NEAMS (Nuclear Energy Advanced Modeling and Simulation) program has funded an Accident Tolerant Fuel (ATF) High Impact Problem (HIP). The ATF HIP is funded for a three-year period. The purpose of the HIP is to perform research into two potential accident tolerant concepts and provide an in-depth report to the Advanced Fuels Campaign (AFC) describing the behavior of the concepts, both of which are being considered for inclusion in a lead test assembly scheduled for placement into a commercial reactor in 2022. The initial focus of the HIP is on uranium silicide fuel and iron-chromium-aluminum (FeCrAl) alloy cladding. Utilizing the expertise of three national laboratory participants (INL, LANL, and ANL) a comprehensive mulitscale approach to modeling is being used including atomistic modeling, molecular dynamics, rate theory, phase-field, and fuel performance simulations. In this paper, we present simulations of two proposed accident tolerant fuel systems: U3Si2 fuel with Zircaloy-4 cladding, and UO2 fuel with FeCrAl cladding. The simulations investigate the fuel performance response of the proposed ATF systems under Loss of Coolant and Station Blackout conditions using the BISON code. Sensitivity analyses are completed using Sandia National Laboratories’ DAKOTA software to determine which input parameters (e.g., fuel specific heat) have the greatest influence on the output metrics of interest (e.g., fuel centerline temperature). Early results indicate that each concept has significant advantages as well as areas of concern. Further work is required prior to formulating the proposition report for the Advanced Fuels Campaign.

36 MATERIALS SCIENCE↗