Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERSTITIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Optical Spectra of Gamma-Irradiated LiF Crystals with Anisotropic Lithium Nanoparticles

The optical response of Li anisotropic defects and nanoparticles from three faces of cubic LiF crystals with 10-mm edges to γ radiation from a {sup 60}Со source with doses of 10{sup 5}–10{sup 9} R at 320 K in air is studied. After a maximum dose of 10{sup 9} R, scanning electron microscopy revealed submicron metal lithium flakes ordered into long parallel nanofilaments. The resonance absorption band, which shifts from 272 to 295 nm with increasing dose, is assigned to lithium nanocolloids in the (110) plane. The band at 202–225 nm observed only from the (100) face narrows at doses below 10{sup 5} R and is assigned to diatomic fluorine molecules in interstitial sites. The appearance of the 209–212–215-nm triplets at 2.7 × 10{sup 5} R from the (100) plane and the 211–213–215-nm triplets at 0.9 × 10{sup 5} R from the (010) plane is related to radiation-induced axially symmetric bipolarons with a high oscillator strength. The splitting of the 445-nm band into a 438–445–450-nm triplet is observed only for the (010) plane after a dose of 10{sup 6} R and is related to surface plasmon polaritons (longitudinal and transverse) of elongated Li nanoparticles. The (F{sub 2}–F{sub 3}) complexes are oriented in the most imperfect (111) plane and are seen along three cubic axes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

XAFS Spectroscopy Study of Microstructure and Electronic Structure of Heterosystems Containing Si/GeMn Quantum Dots

Using X-ray absorption near edge structure spectroscopy, extended X-ray absorption fine structure spectroscopy, atomic force microscopy, and Rutherford backscattering spectroscopy, the features of the microstructure and elemental composition of Si/GeMn magnetic systems obtained by molecular beam epitaxy and containing quantum dots are studied. Intense mixing of Ge and Si atoms is found in all samples. The degree of mixing (diffusion) correlates with the conditions of synthesis of Si/GeMn samples. For these systems, direct contacts of germanium atoms with manganese atoms are characterized and the presence of interstitial manganese with tetrahedral coordination and substitution of manganese for germanium and silicon in the lattice sites is found. The presence of stoichiometric phases Ge{sub 8}Mn{sub 11}, Ge{sub 3}Mn{sub 5} is not detected. The correlations of the Ge, Si, and Mn coordination numbers in the Ge environment are determined both with the Mn flux value (evaporator temperature) and with the temperature at which quantum dots are grown, as well as with other synthesis conditions. The manganese concentration in the samples is determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen diffusion in the elastic fields of dislocations in iron

The effect of dislocation stress fields on the sink efficiency thereof is studied for hydrogen interstitial atoms at temperatures of 293 and 600 K and at a dislocation density of 3 × 10{sup 14} m{sup –2} in bcc iron crystal. Rectilinear full screw and edge dislocations in basic slip systems 〈111〉(110), 〈111〉(112), 〈100〉(100), and 〈100〉(110) are considered. Diffusion of defects is simulated by means of the object kinetic Monte Carlo method. The energy of interaction between defects and dislocations is calculated using the anisotropic theory of elasticity. The elastic fields of dislocations result in a less than 25% change of the sink efficiency as compared to the noninteracting linear sink efficiency at a room temperature. The elastic fields of edge dislocations increase the dislocation sink efficiency, whereas the elastic fields of screw dislocations either decrease this parameter (in the case of dislocations with the Burgers vector being 1/2〈111〉) or do not affect it (in the case of dislocations with the Burgers vector being 〈100〉). At temperatures above 600 K, the dislocations affect the behavior of hydrogen in bcc iron mainly owing to a high binding energy between the hydrogen atom and dislocation cores.

74 ATOMIC AND MOLECULAR PHYSICS↗

Method and apparatus for studying high-temperature properties of conductive materials in the interests of nuclear power engineering

Physical processes during a rapid (microsecond) heating of metals, carbon, and their compounds by a single pulse of electric current are discussed. Effects arising in such short-term heating near the melting point are noted: the electron emission and heat capacity anomalies and the possible occurrence of Frenkel pair (interstitial atom and vacancy). The problem of measuring the temperature using optical methods under pulse heating is considered, including the use of a specimen in the form of a blackbody model. The melting temperature of carbon (4800–4900 K) is measured at increased pulse pressure. The results of studying the properties of metals (by example of zirconium and hafnium) and of zirconium carbide at high temperatures are discussed. The schematics of the pulse setups and the instrumentation, as well as specimens for a pulse experiment, are presented.

36 MATERIALS SCIENCE↗

IR luminescence in thermally treated silicon

Near-edge IR luminescence with peak emission at E = 1.084 eV has been studied in n- and p-type silicon samples with different contents of interstitial oxygen under excitation with a Nd: YAG laser diode. Thermal treatments of the samples demonstrated that the luminescence nearly completely disappears upon thermal treatments at T = 1050 deg. C and is partly restored in two stages in subsequent thermal treatments in the temperature range 550-800 deg. C. The temperature intervals of luminescence quenching and restoration (500-600 and 700-800 deg. C) correlate with the temperature ranges of dissolution for shallow oxygen precipitates (1000 deg. C) and the generation of oxygen-containing thermal defects, the so-called thermal donors of types I and II. The data obtained suggest that the electronic states related to thermal donors are traps for nonequilibrium carriers and the emptying of these traps contributes to the near-edge emission.

36 MATERIALS SCIENCE↗

Anomalous scattering of electrons in n-Si crystals irradiated with protons

The aim of this study was to gain insight into the effect of irradiation with 25-MeV protons on the Hall mobility of electrons in n-Si crystals. Irradiated crystals with an initial electron concentration 6 x 10{sup 13} cm{sup -3} were studied using the Hall method in the range of temperatures 77-300 K. The studies showed that, in crystals irradiated with the proton dose {Phi} = 8.1 x 10{sup 12} cm{sup -2}, the effective mobility of conduction electrons {mu}{sub eff} increases drastically. This effect is direct evidence that inclusions with relatively high conductivity and with nonrectifying junction at interfaces with semiconductor matrix are predominantly formed in n-Si crystals under these conditions. Agglomerations of interstitial atoms or their associations can represent such inclusions.

36 MATERIALS SCIENCE↗

Precipitation of boron in silicon on high-dose implantation

Precipitation of boron implanted in silicon with a dose of 1 x 10{sup 16} cm{sup -2} is studied in relation to the concentration of substitutional boron C{sub B{sub 0}} introduced before implantation and before subsequent annealing at 900 deg. C. It is shown that C{sub B{sub 0}} = 2.5 x 10{sup 20} cm{sup -3} is the critical concentration, at which the formation of precipitates is independent of the concentration of point defects introduced by implantation (far from or close to the mean projected range R{sub p}) and constitutes the prevailing channel of deactivation of boron. At lower concentrations C{sub B{sub 0}} close to the equilibrium concentration, precipitation is observed only far from R{sub p}, in the regions of reduced concentrations of point defects. At the same time, in the region of R{sub p} with a high concentration of point defects, most boron atoms are drawn into clustering with intrinsic interstitial atoms with the formation of dislocation loops and, thus, become electrically inactive as well.

36 MATERIALS SCIENCE↗

Interaction of copper impurity with radiation defects in silicon doped with boron

The spectrum of deep levels formed in boron-doped Czochralski-grown silicon single crystals as a result of interaction of radiation defects with copper impurity is studied. It is shown that, irrespective of the order of introduction of defects (both in the case of low-temperature copper diffusion into crystals preliminarily irradiated with electrons and in the case of irradiation of the samples contaminated with copper), the same set of deep levels appears. In addition to conventional radiation defects, three types of levels have been detected in the band gap of copper-containing crystals. These levels include the level E{sub v} + 0.49 eV (already mentioned in available publications), the level E{sub v} + 0.51 eV (previously not related to copper), and a level close to the donor level of a vacancy. Based on the analysis of concentration profiles, the interstitial carbonoxygen pair is excluded from possible precursors of the copper-containing center with level E{sub v} + 0.49 eV.

36 MATERIALS SCIENCE↗

Oxygen in Ge:Sn

The effect of doping with tin on the {nu}{sub 3} vibrational mode of oxygen in Ge has been studied. The appearance of three new series of absorption lines besides the {nu}{sub 3} oxygen vibration spectra was found. The spectrum structure in each series of lines found is similar to the {nu}{sub 3} oxygen spectrum structure in Ge. But unlike the {nu}{sub 3} mode, the fine structure due to rotational-vibrational interaction of the {nu}{sub 3} and {nu}{sub 2} modes is not observed and the spectrum structure remains up to temperatures of 130 K. The found three sets of absorption lines are ascribed to the {nu}{sub 3} vibration of interstitial oxygen disturbed by tin atoms located in the nearest environment. The assumption has been made that no rotation of oxygen around a Ge-Ge bond for a Ge-O-Ge quasimolecule disturbed by a neighbour Sn atom occurs.

36 MATERIALS SCIENCE↗

Hyperfine Interaction and Shockley–Read–Hall Recombination in Semiconductors

Experimental and theoretical studies on optical orientation and spin-dependent recombination in a semiconductor in a magnetic field under the normal incidence of circularly polarized radiation onto the sample surface are reviewed. The experiments were carried out on GaAs{sub 1 –x}N{sub x} solid solutions, in which Ga{sup 2+} interstitial displacement defects play the role of deep paramagnetic centers responsible for spin-dependent recombination. It is established that, in the investigated materials, the hyperfine interaction of a localized electron with one nucleus of the paramagnetic center remains strong even at room temperature. The theory is compared with an experiment conducted in the steady-state excitation mode and under two-pulse pump-probe conditions. An analytical formula for spin beats in a magnetic field is derived.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of Nanosized Surface Layers of 03Kh17N12M2 Stainless Steel by Implantation of N{sup +} Ions

Accumulation of nitrogen in nanosized surface layers of 03Kh17N12M2 stainless steel has been detected upon N{sup +} ion implantation up to 14 at % together with metal nitrides, mainly of chromium nitride CrN and interstitial solid solution. It has been demonstrated that N{sup +} ion implantation accompanied by preliminary irradiation by Ar{sup +} and O{sup +} ions decreases maximum nitrogen concentration by at least two times. It is assumed that this is stipulated by segregation to surface layers of iron atoms upon irradiation by Ar{sup +} ions as well as formation of chromium oxide Cr{sub 2}O{sub 3} and chromium hydroxide CrOOH upon irradiation by O{sup +} ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Differing behaviors of point defects in Fe–36Ni alloy during annealing after low-temperature deformation and irradiation

Fe–36Ni alloy is studied in states in which it is quenched, irradiated with electrons at 70 K, and deformed at 77 K. It is shown that similar structure-phase transformations occur in the investigated alloy during annealing at the temperature range of 70–570 K both after preliminary low-temperature electron irradiation and after preliminary low-temperature deformation. Migration of interstitial atoms (70–140 K) and vacancies (180–570 K), which induce phase transformations and are the results of atomic separation and ordering of zones with increased nickel content, is observed. Mechanisms of structure-phase changes under deformation and annealing are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Hydrogen on Fluctuation Embrittlement of Aluminum

In this paper, we describe the main processes occurring during the generation of vacancies in aluminum in the presence of hydrogen by ab initio methods using the SCAN functional. Hydrogen is shown to reduce the generation energy of vacancies from 2.8 to 0.8 eV. In this case, the eight hydrogen atoms located in the tetrahedral lattice voids around single aluminum atom greatly facilitate its movement to the interstitial site. The dependence of the activation energy of hydrogen embrittlement of aluminum on the hydrogen concentration in aluminum and temperature is calculated based on the kinetic strength concept. Hydrogen is shown to reduce the time of aluminum destruction only if its mole fraction in aluminum is greater than the critical level (~ 3 × 10{sup –4} at T = 293 K).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding irradiation growth through atomistic simulations: Defect diffusion and clustering in α-zirconium and the influence of alloying elements - 2016-0093

Irradiation-induced structural changes of α-zirconium alloys and in particular the effect of iron were investigated by molecular dynamics simulations using embedded atom potentials derived from first-principles calculations. The simulations revealed that at temperatures between 500 and 600 K self-interstitial atoms (SIAs) diffuse rapidly in a cooperative movement, preferably parallel to basal planes (a directions; ), forming nano-clusters with an extension in and . Vacancies diffuse more slowly than SIAs and remain isolated for a longer period of time. Nano-clusters associated with SIAs cause a pronounced overall expansion in a directions, as well as local strains. Under compressive strain in the c direction, vacancy diffusivity increases in the c direction. In contrast, the diffusivity of SIAs increases in the c direction under a tensile strain in the c direction. SIA nano-clusters are highly mobile within basal planes. Vacancy clusters grow by merging, leading to a contraction in the a direction, compensating for the expansion caused by SIA nano-clusters and possibly contributing to the plateau in growth after the initial rapid expansion. At the onset of breakaway growth, possibly due to stress buildup, the vacancy nano-clusters can condense into c loops, thereby diminishing the compensation effect. The alloying elements iron, nickel, chromium, and niobium liberated from secondary phase particles under irradiation or already in solution are attracted to vacancies and SIAs and are found inside vacancy and SIA loops. The interaction of alloying elements with defect clusters is discussed, with a particular focus on iron. Iron has been found to promote cluster formation in zirconium, and the structures of zirconium-iron clusters have been analyzed. Tin is repelled by SIA clusters and only weakly attracted by vacancies. Niobium impedes the diffusion of SIAs (and therefore may increase annihilation rates with nearby vacancies) and does not destabilize vacancy or SIA clusters. Ab initio calculations of the dimensional and elastic coefficients of the intermetallic phases occurring in secondary phase particles, such as Zr{sub 2}Fe and Zr{sub 3}Fe, are presented, allowing an assessment of local strains in a zirconium matrix. Thus, novel results from extended molecular dynamics simulations provide new insights and contribute to a deeper understanding of the complex mechanisms causing irradiation-induced dimensional changes and the breakaway growth of zirconium alloys. (authors)

36 MATERIALS SCIENCE↗

Equivalent radiation damage in zirconium irradiated in various reactors - 2016-0101

The physical properties and in-reactor performance of core components made from zirconium alloys are a function of the radiation-induced atomic displacements that occur during service. The vacancy and interstitial point defects and their clusters created by the atomic displacements modify the microstructure, and therefore physical properties such as strength and ductility, by forming dislocation loops. The rate of production of point defects also affects time-dependent properties such as creep and diffusion (mass transport). To simulate the effect of irradiation on core components, researchers have used materials test reactors for many years to irradiate and test materials. Such reactor tests can target an accumulated displacement damage dose to simulate the state of a material at a given stage in reactor life but at an accelerated rate. Each nuclear reactor has a specific neutron energy spectrum that also depends on the in-reactor location. Therefore, to use test reactor data to determine the effect of radiation damage on power reactor materials, one must convert the accumulated dose into a unit that is common in its effect on the material properties. For many property changes in nuclear reactor cores, this unit is displacements per atom. This paper compares the damage production for zirconium irradiated under differing neutron energy spectra in various power and test reactors. The damage rates as a function of different measures of neutron flux were used to relate atomic displacements in various materials test reactors to CANDU and light-water reactor conditions. (authors)

36 MATERIALS SCIENCE↗

Artificial intelligence models, photos, and data associated with the manuscript “Quantifying Streambed Grain Size, Uncertainty, and Hydrobiogeochemical Parameters Using Machine Learning Model YOLO” (v2)

This data package is associated with the manuscript “Quantifying Streambed Grain Size, Uncertainty, and Hydrobiogeochemical Parameters Using Machine Learning Model YOLO” published in Water Resources Research (Chen et al., 2024). This data package includes the training, validation, testing, and prediction data used by the artificial intelligence (AI) model for automated grain size and hydro-biogeochemistry quantification using streambed photos. The grain size data are extracted for each photo using You Look Only Once (YOLO), a pre-trained object detection model. This data package was originally published in October 2023. It was updated August 2025 (v2; new and modified files). File and folder names were not revised to indicate changes. See the change history section in the readme for more details. Please see flmd.csv for a list of all files contained in this data package and descriptions for each. Please see dd.csv for a data dictionary that defines the column headers of .csv files in the data package. This dataset is comprised of one data folder containing (1) file-level metadata; (2) data dictionary; (3) readme; and (4) six subfolders. Subfolders 1 to 4 include the training, validation, testing, and prediction data. Subfolder 5_Summary includes the summary results of different combinations of training, validation, testing, and prediction data. Subfolder 6_SupplementalData includes additional data downloaded from public sources (Kaufman et al., 2023a; Kaufman et al., 2023b; Garefalakis et al., 2023; Mair et al., 2024; https://github.com/river-corridors-sfa/Geospatial_variables). In total, the data package includes 110 folders and 44,283 files. These files include 9,047 .jpg photos, 1 .png photo, 3 .tif photos; 26,639 photo labels and individual grain sizes and probability from AI (.txt); 8,447 grain size distribution data (.dat); and 126 CSV files for results summary, and 14 required metadata files (.xlsx). The summary CSV files contain 68 columns and approximately 2,200 rows that represent photo names, site locations, recording time, GPS coordinates, grains sizes (D10, D50, D60, and D84), number of grains, and additional hydro-biogeochemical data such as water depth, flow velocity, Manning’s coefficient, friction factor, hydraulic conductivity, permeability, streambed interstitial velocity magnitude, mass transfer rate, and nitrate uptake velocity. The photos were obtained from 75 sites in the Yakima River Basin and the Columbia River shorelines, and other associated data from samples and sensors obtained when the photos were taken are publicly available (Fulton et al. 2022; Grieger et al. 2023). All files are .csv, .txt, .dat, .jpg, or .pdf. We acknowledge the Yakama Nation as owners and caretakers of the lands where we collected some of these data. We thank the Confederated Tribes and Bands of the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview.

54 ENVIRONMENTAL SCIENCES↗

Effects of the crystallographic orientation of Sn on the electromigration of Cu/Sn-Ag-Cu/Cu ball joints

Electromigration behavior and fast circuit failure with respect to crystallographic orientation of Sn grains were examined. The test vehicle was Cu/Sn-3.0 wt% Ag-0.5 wt% Cu/Cu ball joints, and the applied current density was 15 kA/cm 2 at 160 °C. The experimental results indicate that most of the solder bumps show different microstructural changes with respect to the crystallographic orientation of Sn grains. Fast failure of the bump occurred due to the dissolution of the Cu circuit on the cathode side caused by the fast interstitial diffusion of Cu atoms along the c-axis of the Sn grains when the c-axis was parallel to the electron flow. Slight microstructural changes were observed when the c-axis was perpendicular to the electron flow. In addition, Cu 6 Sn 5 intermetallic compound (IMC) was formed along the direction of the c-axis of the Sn grains instead of the direction of electron flow in all solder ball joints.

36 MATERIALS SCIENCE↗

Diffusional exchange of isotopes in a metal hydride sphere.

This report describes the Spherical Particle Exchange Model (SPEM), which simulates exchange of one hydrogen isotope by another hydrogen isotope in a spherical metal hydride particle. This is one of the fundamental physical processes during isotope exchange in a bed of spherical metal particles and is thus one of the key components in any comprehensive physics-based model of exchange. There are two important physical processes in the model. One is the entropy of mixing between the two isotopes; the entropy of mixing is increased by having both isotopes randomly placed at interstitial sites on the lattice and thus impedes the exchange process. The other physical process is the elastic interaction between isotope atoms on the lattice. The elastic interaction is the cause for {beta}-phase formation and is independent of the isotope species. In this report the coupled diffusion equations for two isotopes in the {beta}-phase hydride are solved. A key concept is that the diffusion of one isotope depends not only on its concentration gradient, but also on the concentration gradient of the other isotope. Diffusion rate constants and the chemical potentials for deuterium and hydrogen in the {beta}-phase hydride are reviewed because these quantities are essential for an accurate model of the diffusion process. Finally, a summary of some of the predictions from the SPEM model are provided.

08 HYDROGEN↗