Search NASA⌕ Search

SEARCH · Search NASA

Results for “Intersection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

On residual stress analysis and microstructural evolution for stainless steel type 304 spent nuclear fuel canisters weld joint: Numerical and experimental studies

Chloride-induced stress corrosion cracking (CISCC) in the weldments of austenitic stainless steel canisters is one of the primary safety concerns during the dry storage of used nuclear fuel at Independent Spent Fuel Storage Installations in coastal areas. In order to evaluate the CISCC behavior in the canister, a 3D sequentially coupled thermo-mechanical finite element model was built to simulate the residual stresses induced by two intersecting longitudinal and circumferential multi-pass welds in austenitic stainless steel mockup canister. Weld-induced residual stresses from simulation were in good agreement with the experimental measurement results by deep-hole drilling and contour methods. Through-wall high tensile axial and hoop stresses were observed in both the fusion zone and heat affected zone (HAZ) in the longitudinal and circumferential weld, respectively. On the other hand, the microstructure within the weldments of 304 stainless steel mockup was characterized using optical microscopy, scanning electron microscopy, electron back-scattered diffraction and energy dispersive X-ray spectroscopy methods. A few amount of MnS inclusions in both the base metal and HAZ, and a lot of (Mn,Si) x O y inclusions in the fusion zone were found. Meanwhile, there is some α'-martensite in the base metal, while the martensite was reversed in the HAZ. In the fusion zone, there is a lot of δ-ferrite. The martensite reversion phenomenon was also verified by the combination of Feritscope test and thermal simulation, which could predict a martensite reversion temperature as 400C°. The welding residual stresses and microstructure analysis results could offer the instructive information for the prediction of CISCC behavior of the spent nuclear fuel canisters.

36 MATERIALS SCIENCE↗

Deformation band corrosion as a result of applied stress and cold-work in 304 stainless steel in simulated pressurized water reactor primary water conditions

Stainless steels like 304SS are commonly used in pressurized water reactor primary water environments due to their excellent resistance to stress corrosion cracking (SCC). However, SCC susceptibility has been observed in cold-worked 304SS. Cold-rolling introduces a high density of defects, such as deformation bands or dislocations, into the microstructure; applied stress, even if macroscopically below the yield stress, can result in regions with high localized stresses. Cold-worked and non-cold-worked samples were exposed to 360 °C simulated PWR primary water for 1500 h with and without active loading. Corrosion susceptibility of dislocations and deformation bands induced by cold-rolling and/or applied stress was studied using high-resolution (analytical) transmission electron microscopy. Deformation bands were generated in all specimens examined in the study. Penetrative oxidation was observed in some deformation bands in each specimen. The depth of penetrative deformation band oxidation frequently exceeded the depth of grain boundary oxidation in all specimens. However, deformation band oxides generally were narrowly confined to the deformation band plane. Highly Ni-rich regions were observed beyond all oxidation fronts. Surface oxides were thicker in the specimens exposed under active loading. In conclusion, the implications of these findings at surfaces for deformation bands intersecting stress corrosion crack paths are discussed.

EFTEM↗

Analysis of the growth of strike-slip faults using effective medium theory

Increases in the dimensions of strike-slip faults including fault length, thickness of fault rock and the surrounding damage zone collectively provide quantitative definition of fault growth and are commonly measured in terms of the maximum fault slip. The field observations indicate that a common mechanism for fault growth in the brittle upper crust is fault lengthening by linkage and coalescence of neighboring fault segments or strands, and fault rock-zone widening into highly fractured inner damage zone via cataclastic deformation. The most important underlying mechanical reason in both cases is prior weakening of the rocks surrounding a fault's core and between neighboring fault segments by faulting-related fractures. In this paper, using field observations together with effective medium models, we analyze the reduction in the effective elastic properties of rock in terms of density of the fault-related brittle fractures and fracture intersection angles controlled primarily by the splay angles. Fracture densities or equivalent fracture spacing values corresponding to the vanishing Young's, shear, and quasi-pure shear moduli were obtained by extrapolation from the calculated range of these parameters. The fracture densities or the equivalent spacing values obtained using this method compare well with the field data measured along scan lines across the faults in the study area. These findings should be helpful for a better understanding of the fracture density/spacing distribution around faults and the transition from discrete fracturing to cataclastic deformation associated with fault growth and the related instabilities.

54 ENVIRONMENTAL SCIENCES↗

Structural and magnetic properties of Pr{sub 18}Li{sub 8}Fe{sub 5-x}M{sub x}O{sub 39} (M=Ru, Mn, Co)

A polycrystalline sample of Pr{sub 18}Li{sub 8}Fe{sub 4}RuO{sub 39} has been synthesized by a solid state method and characterized by neutron powder diffraction, magnetometry and Moessbauer spectroscopy; samples of Pr{sub 18}Li{sub 8}Fe{sub 5-x}Mn{sub x}O{sub 39} and Pr{sub 18}Li{sub 8}Fe{sub 5-x}Co{sub x}O{sub 39} (x=1, 2) have been studied by magnetometry. All these compounds adopt a cubic structure (space group Pm3-barn, a{sub 0}{approx}11.97 A) based on intersecting <111> chains made up of alternating octahedral and trigonal-prismatic coordination sites. These chains occupy channels within a Pr-O framework. The trigonal-prismatic site in Pr{sub 18}Li{sub 8}Fe{sub 4}RuO{sub 39} is occupied by Li{sup +} and high-spin Fe{sup 3+}. The remaining transition-metal cations occupy the two crystallographically-distinct octahedral sites in a disordered manner. All five compositions adopt a spin-glass-like state at 7 K (Pr{sub 18}Li{sub 8}Fe{sub 4}RuO{sub 39}) or below. - Graphical abstract: Pr{sub 18}Li{sub 8}Fe{sub 5-x}M{sub x}O{sub 39} (M=Ru, Mn, Co) have been studied by neutron diffraction, Moessbauer spectroscopy and magnetometry, allowing the distribution of the different cation species over the octahedral and trigonal-prismatic coordination sites within the structure to be determined. All the compositions studied undergo a transition to a spin-glass-like phase on cooling below {approx}5 K.

36 MATERIALS SCIENCE↗

Guests inducing p-sulfonatocalix[4]arenes into nanocapsule and layer structure

Reaction of sodium p-sulfonatocalix[4]arene and TbCl{sub 3} in the presence of 2,2'-bipyridine-N,N'-dioxide (bpdo) gives the 2:1 supramolecular nanocapsule [[Tb(bpdo){sub 2}.4H{sub 2}O]{sup 3+} intersection {l_brace}p-sulfonatocalix[4]arene{sup 4-{r_brace}}{sub 2}], which further interacts with the [Tb(bpdo){sub 4}]{sup 3+} through charge-assisted {pi}-stacking interactions forming a channel structure 1. In further investigation, we tried to use the terpyridine-1,1',1'-trisoxide (tpto) instead of bpdo. Although we failed to isolate a supramolecular capsules based on the tpto, lanthanide and p-sulfonatocalix[4]arene, a layer structure derived from p-sulfonatocalix[4]arene with an unusual [Cu(tpto){sub 2}]{sup 2+} incorporation into the cavity of the calixarene and an outside [Cu(tpto){sub 2}]{sup 2+} balancing the charge, has been obtained. Fluorescence spectra show clearly that compound 1 possesses the luminescence characteristics of Tb{sup 3+} and the ligand bpdo can sensitize Tb{sup 3+} ion. Gas sorption experiment shows the channel structure 1 has highly selective gas sorption properties for water and methanol. - Graphical abstract: In the presence of different guests, a nanochannel architecture based on the p-sulfonato[4]calixarene capsule and a layered structure based on the p-sulfonato[4]calixarene tecton have been synthesized, and the luminescence properties and guest sorption of porous structure have been investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and structural chemistry of La{sub 18}Li{sub 8}Rh{sub 4}MO{sub 39} (M=Ti, Mn, Ru)

Polycrystalline samples of La{sub 18}Li{sub 8}Rh{sub 4}MO{sub 39} (M=Ti, Mn, Ru) have been prepared by a solid-state method and studied by neutron powder diffraction. They are isostructural with La{sub 18}Li{sub 8}Rh{sub 5}O{sub 39} and adopt the cubic space group Pm3{sup -bar }n with a {approx}12.22 A. Their structure consists of a La-O framework containing intersecting channels that run along <111>. These channels are occupied by chains made up of alternating, face-sharing trigonal-prismatic and octahedral coordination polyhedra; there are two crystallographically distinct types of octahedral site. The prisms are occupied by Li and the transition metals are disordered over the two octahedral sites. - Graphical abstract: The substitution of Ti, Mn or Ru into La{sub 18}Li{sub 8}Rh{sub 5}O{sub 39} results in the loss of the cation ordering seen in the parent compound.

36 MATERIALS SCIENCE↗

Syntheses, crystal structures, and properties of three new metal selenites Na{sub 2}Co{sub 2}(SeO{sub 3}){sub 3}, Na{sub 2}Co{sub 1.67}Ni{sub 0.33}(SeO{sub 3}){sub 3}, and Na{sub 2}Ni{sub 2}(SeO{sub 3}){sub 3}

Three new sodium cobalt (nickel) selenite compounds, namely, Na{sub 2}Co{sub 2}(SeO{sub 3}){sub 3}, Na{sub 2}Co{sub 1.67}Ni{sub 0.33}(SeO{sub 3}){sub 3}, and Na{sub 2}Ni{sub 2}(SeO{sub 3}){sub 3} have been hydro-/solvothermally synthesized in the mixed solvents of acetonitrile and water. Single-crystal X-ray diffraction analyses reveal that these isostructural compounds belong to the orthorhombic Cmcm space group and their structures feature three-dimensional open frameworks constructed by the two-dimensional layers of [MSeO{sub 3}] pillared by the [SeO{sub 3}]{sup 2-} groups. The two different types of Na{sup +} ions reside in the intersecting two-dimensional channels parallel to the a- and c-axes, respectively. Their thermal properties have been investigated via TGA-DSC. The magnetic measurements indicate the existence of the antiferromagnetic interactions in these compounds. - Graphical abstract: Three new isostructural metal selenites, Na{sub 2}Co{sub 2}(SeO{sub 3}){sub 3}, Na{sub 2}Co{sub 1.67}Ni{sub 0.33}(SeO{sub 3}){sub 3}, and Na{sub 2}Ni{sub 2}(SeO{sub 3}){sub 3} have been hydro-/solvothermally synthesized and characterized. Their structures feature three-dimensional open frameworks with Na{sup +}-occupied channels.

36 MATERIALS SCIENCE↗

Thermochemical and kinetic aspects of the sulfurization of Cu-Sb and Cu-Bi thin films

CuSbS{sub 2} and Cu{sub 3}BiS{sub 3} are being investigated as part of a search for new absorber materials for photovoltaic devices. Thin films of these chalcogenides were produced by conversion of stacked and co-electroplated metal precursor layers in the presence of elemental sulfur vapour. Ex-situ XRD and SEM/EDS analyses of the processed samples were employed to study the reaction sequence with the aim of achieving compact layer morphologies. A new 'Time-Temperature-Reaction' (TTR) diagram and modified Pilling-Bedworth coefficients have been introduced for the description and interpretation of the reaction kinetics. For equal processing times, the minimum temperature required for CuSbS{sub 2} to appear is substantially lower than for Cu{sub 3}BiS{sub 3}, suggesting that interdiffusion across the interfaces between the binary sulfides is a key step in the formation of the ternary compounds. The effects of the heating rate and sulfur partial pressure on the phase evolution as well as the potential losses of Sb and Bi during the processes have been investigated experimentally and the results related to the equilibrium pressure diagrams obtained via thermochemical computation. - Graphical Abstract: Example of 3D plot showing the equilibrium pressure surfaces of species potentially escaping from chalcogenide films as a function of temperature and sulfur partial pressure. Bi{sub (g)}, Bi{sub 2(g)}, and BiS{sub (g)} are the gaseous species in equilibrium with solid Bi{sub 2}S{sub 3(s)} considered in this specific example. The pressure threshold plane corresponds to the pressure limit above which the elemental losses from 1 {mu}m thick films exceeds 10% of the original content per cm{sup 2} area of film and dm{sup 3} capacity of sulfurization furnace under static atmosphere conditions. The sulfurization temperature/sulfur partial pressure boundaries required to minimise the elemental losses below a given value can be easily read from the 2D projection of the intersection curves into the T-p{sub S2} plane. Highlights: Black-Right-Pointing-Triangle Sulfurization of Sb-Cu and Bi-Cu metal precursors for thin film PV applications. Black-Right-Pointing-Triangle Kinetics shows the rate determining step to be the interdiffusion of binary sulfides. Black-Right-Pointing-Triangle Phase evolution is consistent with Pilling-Bedworth coefficients of Cu, Sb and Bi. Black-Right-Pointing-Triangle Elemental losses can be minimised via the use of equilibrium pressure diagrams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of (H{sub 2}dab){sub 2}Cu{sub 8}Ge{sub 4}S{sub 14}{center_dot}2H{sub 2}O: An expanded framework based on icosahedral Cu{sub 8}S{sub 12} cluster

A new three-dimensional framework copper-thiogermanate, (H{sub 2}dab){sub 2}Cu{sub 8}Ge{sub 4}S{sub 14}{center_dot}2H{sub 2}O (1), was prepared under solvothermal condition and characterized by elemental analysis, single-crystal and powder X-ray diffraction, thermogravimetric analysis and UV-vis diffuse reflectance spectroscopy. Compound 1 crystallizes in the monoclinic space group P2(1)/c, a=11.444(4) A, b=12.984(4) A, c=12.455(6) A, {beta}=91.527(1) Degree-Sign , V=1850.2(3) A{sup 3}, Z=2. It contains a new three-dimensional Cu-Ge-S framework constructed from icosahedral [Cu{sub 8}S{sub 12}]{sup 16-} clusters linked by [GeS{sub 4}]{sup 4-} and dimeric [Ge{sub 2}S{sub 6}]{sup 4-} units, with diprotonated 1,4-dab (1,4-diaminobutane) and H{sub 2}O molecules located in the intersecting channels. UV-vis reflectance spectroscopy reveals the band gap of compound 1 is 2.5 eV. - Graphical abstract: Compound 1 contains a 3D expanded framework constructed from icosahedral Cu{sub 8}S{sub 12} clusters linked by GeS{sub 4} and dimeric Ge{sub 2}S{sub 6} units, with diprotonated 1,4-dab and H{sub 2}O molecules located in the channels. Highlights: Black-Right-Pointing-Pointer A new 3-D framework copper-thiogermanate was prepared under solvothermal condition. Black-Right-Pointing-Pointer The framework is built up from icosahedral Cu{sub 8}S{sub 12} clusters linked by GeS{sub 4} and dimeric Ge{sub 2}S{sub 6} units. Black-Right-Pointing-Pointer The result provides a new strategy to expand octahedral SBUs-based framework. Black-Right-Pointing-Pointer Compound 1 is a semiconductor with the band gap of 2.5 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural chemistry and spin-glass behaviour of Nd{sub 18}Li{sub 8}Fe{sub 4}TiO{sub 39}

Nd{sub 18}Li{sub 8}Fe{sub 4}TiO{sub 39} has been synthesised and characterised by neutron powder diffraction, X-ray absorption spectroscopy, Moessbauer spectroscopy and magnetometry. The cubic structure (Pm3-bar n, a=11.97227(8) A) is based on intersecting Left-Pointing-Angle-Bracket 1 1 1 Right-Pointing-Angle-Bracket chains comprised of alternating octahedral and trigonal-prismatic coordination sites. These chains lie within hexagonal-prismatic cavities formed by a Nd-O framework. The larger of the two crystallographically distinct octahedral sites, 8e, is occupied by iron, titanium and lithium in a ratio of 76:20:4; the smaller, 2a, is occupied by iron and titanium in a ratio of 79:21. The trigonal-prismatic site, 16i, is occupied by lithium and iron in a ratio of 98:2. The cations on the 2a sites are assigned as Ti{sup 4+}and low-spin Fe{sup 4+}, and those on the 16i sites as Li{sup +} and Fe{sup 3+}. The 8e sites are thought to be occupied by Li{sup +}, Fe{sup 3+} and Ti{sup 3+}. Nd{sub 18}Li{sub 8}Fe{sub 4}TiO{sub 39} undergoes a transition to a spin-glass state at 4.25(5) K. - Graphical abstract: Nd{sub 18}Li{sub 8}Fe{sub 4}TiO{sub 39} undergoes a transition to a spin-glass state at 4.25(5) K. Highlights: Black-Right-Pointing-Pointer Spin-glass behaviour in Nd{sub 18}Li{sub 8}Fe{sub 4}TiO{sub 39} below 4.25 K. Black-Right-Pointing-Pointer Application of X-ray absorption spectroscopy to a complex mixed-metal oxide. Black-Right-Pointing-Pointer Mixed-valence cations in Nd{sub 18}Li{sub 8}Fe{sub 4}TiO{sub 39}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Construction of two novel indium phosphites with (3,6)- and (3,5)-connected frameworks: Synthesis, structure and characterization

Two novel anionic indium phosphites, formulated as [H{sub 3}O][In(HPO{sub 3}){sub 2}] (1) and [C{sub 4}H{sub 12}N{sub 2}][In{sub 2}(HPO{sub 3}){sub 3}(C{sub 2}O{sub 4})] (2), were prepared under hydrothermal conditions by using piperazine (PIP) as a structure-directing agent (SDA). Single-crystal X-ray diffraction analysis reveals that compounds 1 and 2 crystallize in the hexagonal space group P6{sub 3}mc (No. 186) and orthorhombic space group Cmcm (No. 63), respectively. Compound 1, constructed from InO{sub 6} octahedra and HPO{sub 3} pseudo-pyramids, exhibits a rare (3,6)-connected layer structure with kgd (Kagome dual) topology. Compound 2, on the other hand, features a 3D phosphite-oxalate hybrid structure with intersecting 8- and 12-MRs channels. From a topological perspective 2 can be regarded as a (3, 5)-connected binodal net with the Schlaefli symbol (4{sup 2}.6)(4{sup 2}.6{sup 5}.8{sup 3}). Highlights: Black-Right-Pointing-Pointer Two novel indium phosphite and indium phosphite-oxalate hybrid compounds are synthesized. Black-Right-Pointing-Pointer (3, 6)-connected layer structure with kgd topology. Black-Right-Pointing-Pointer (3,5)-connected binodal net with the Schlaefli symbol (4{sup 2}.6)(4{sup 2}.6{sup 5}.8{sup 3}).

36 MATERIALS SCIENCE↗

A new strontium antimonate{sup III} Sr{sub 5}Sb{sub 22}O{sub 38}: Synthesis, crystal structure and characterizations

A new strontium antimonate{sup III}, Sr{sub 5}Sb{sub 22}O{sub 38}, has been hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction. It crystallizes in the P2{sub 1}/n space group of the monoclinic system with a=11.739(9) Å, b=12.014(10) Å, c=16.412(13) Å, β=91.460(8)°, V=2314.0(3) Å{sup 3}. The crystal structure is built of seven trigonal–pyramidal SbO{sub 3} and four sphenoid SbO{sub 4} polyhedra which are connected through sharing corner-oxygen atoms to form the complex three-dimensional {sub ∞}{sup 3}[Sb{sub 22}O{sub 38}]{sup 10−} anionic network with two different intersectant tunnels along the [111-bar ] and [11-bar 1-bar ] directions accommodating the electric charge balanced Sr{sup 2+} cations. First-principles electronic structure calculations based on the density functional theory (DFT) and the UV–vis diffuse reflectance spectroscopy measurements both indicate that the compound belongs to a direct band insulator with an optical gap value of 3.3 eV. - Graphical abstract: The 2D Sb–O slabs are stacked through sharing oxygen atoms to form the 3D network structure of the new strontium antimonate{sup III} Sr{sub 5}Sb{sub 22}O{sub 38}. - Highlights: • A new strontium antimonate{sup III}, Sr{sub 5}Sb{sub 22}O{sub 38}, has been hydrothermally synthesized. • The single crystal structure was determined by X-ray diffraction. • The powder XRD and UV–vis absorption spectroscopy were studied. • Theoretical studies interpret the relationships between optical absorption and crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural chemistry and magnetic properties of Nd{sub 18}Li{sub 8}Fe{sub 4}M′O{sub 39} (M′=Al, Ga) and La{sub 18}Li{sub 8}Fe{sub 4.5}In{sub 0.5}O{sub 39}

Polycrystalline samples of Nd{sub 18}Li{sub 8}Fe{sub 4}M′O{sub 39} (M′=Al, Ga) and La{sub 18}Li{sub 8}Fe{sub 4.5}In{sub 0.5}O{sub 39} have been prepared by the ceramic method and characterised by neutron diffraction and magnetometry. All three compounds adopt a cubic structure (space group Pm3{sup ¯}n, a ∼12 Å) based on intersecting 〈1 1 1〉 chains of cation sites with alternating octahedral and prismatic coordination geometry. These sites are occupied by Li, Fe and M′ or In; Nd or La cations occupy sites between the chains. The cation distribution over the octahedral and prismatic sites within the chains is disordered in all three compounds. The Nd-containing compositions show spin-glass behaviour below ∼4.5 K whereas small, weakly-ferrimagnetic domains form in La{sub 18}Li{sub 8}Fe{sub 4.5}In{sub 0.5}O{sub 39} below 7.60 K. The dependence of the magnetic properties on the nature of the lanthanide cation is discussed. - Graphical abstract: At low temperatures Nd{sub 18}Li{sub 8}Fe{sub 4}M′O{sub 39} (M’=Al, Ga) behave as spin glasses whereas small ferrimagnetic domains form in La{sub 18}Li{sub 8}Fe{sub 4.5}In{sub 0.5}O{sub 39}. Display Omitted - Highlights: • p-Block cations can be accommodated in the La{sub 18}Li{sub 8}Rh{sub 5}O{sub 39} structure. • Small ferrimagnetic domains in La{sub 18}Li{sub 8}Fe{sub 4.5}In{sub 0.5}O{sub 39}. • Magnetic behaviour controlled by the lanthanide cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new copper borophosphate with novel polymeric chains and its structural correlation with raw materials in molten hydrated flux synthesis

A novel copper borophosphate, Cu{sub 3}[B{sub 2}P{sub 3}O{sub 12}(OH){sub 3}] has been prepared by the molten hydrated flux method. Its crystal structure was determined by the single-crystal X-ray diffraction (monoclinic, Cc, a=6.1895 Å, b=13.6209 Å, c=11.9373 Å, β=97.62°, V=997.5 Å{sup 3}, Z=4). The three-dimensional framework of the titled compound, is composed by two kinds of polymeric chains and isolated PO{sub 4} tetrahedral. One novel 4-membered tetrahedral rings has been observed in borophosphates. Magnetic measurements indicate that the title compound exits antiferromagnetic interactions. Due to the special reaction medium created by the molten hydrated flux method, a possible structural correlation between the final solids and the raw materials has been noted. - Graphical abstract: The 3D structure consists of a framework composed of CuO{sub x} polyhedra, BO{sub 4} and PO{sub 4} tetrahedra. A intersection angle between the metal chains and borophosphate chains can be noted. Display Omitted - Highlights: • A novel copper borophosphate has been prepared by the molten hydrated flux method. • One novel 4-membered tetrahedral ring has been observed firstly in borophosphates. • A possible structural correlation between the final solids and the raw materials has been noted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cation–cation interactions and cation exchange in a series of isostructural framework uranyl tungstates

The isotypical compounds (UO{sub 2}){sub 3}(WO{sub 6})(H{sub 2}O){sub 5} (1), Ag(UO{sub 2}){sub 3}(WO{sub 6})(OH)(H{sub 2}O){sub 3} (2), K(UO{sub 2}){sub 3}(WO{sub 6})OH(H{sub 2}O){sub 4} (3), Rb(UO{sub 2}){sub 3}(WO{sub 6})(OH)(H{sub 2}O){sub 3.5} (4), and Cs(UO{sub 2}){sub 3}(WO{sub 6})OH(H{sub 2}O){sub 3} (5) were synthesized, characterized, and their structures determined. Each crystallizes in space group Cc. (1): a=12.979 (3), b=10.238 (2), c=11.302 (2), β=102.044 (2); (2): a=13.148 (2), b=9.520 (1), c=11.083 (2), β=101.568 (2); (3): a=13.111 (8), b=9.930 (6), c=11.242 (7), β=101.024 (7); (4): a=12.940 (2), b=10.231 (2), c=11.259(2), β=102.205 (2); (5): a=12.983 (3), b=10.191 (3), c=11.263 (4), β=101.661 (4). Compounds 1–5 are a framework of uranyl and tungsten polyhedra containing cation–cation interactions. The framework has three symmetrically distinct U(VI) cations, one tungsten, sixteen to eighteen oxygen atoms, and in 2–5, one monovalent cation. Each atom occupies a general position. Each U(VI) cation is present as a typical (UO{sub 2}){sup 2+} uranyl ion in an overall pentagonal bipyramidal coordination environment. Each pentagonal bipyramid shares two equatorial edges with two other pentagonal bipyramids, forming a trimer. Trimers are connected into chains by edge-sharing with WO{sub 6} octahedra. Chains are linked through cation–cation interactions between two symmetrically independent uranyl ions. This yields a remarkably complex system of intersecting channels that extend along [0 0 1] and [−1 1 0]. The cation exchange properties of 2 and 3 were characterized at room temperature and at 140 °C. - Graphical abstract: Chains of uranium and tungsten polyhedra are connected into a three dimensional framework by cation–cation interactions occurring between two symmetrically independent uranyl pentagonal bipyramids. Monovalent cations present in channels within the structure can be exchanged by room temperature or mild hydrothermal treatments. The framework of these compounds is robust to cation exchange and heat. (yellow polyhedra=uranium pentagonal bipyramids; blue polyhedra=tungsten octahedral, purple balls=K; yellow balls=Na; grey balls=Tl). - Highlights: • Five isostructural uranyl tungstates compounds were synthesized hydrothermally. • The structures consist of a chains of uranium and tungstate polyhedral. • Chains are connected into a framework by cation–cation interactions. • Cation exchange does not alter the structural integrity of the compounds. • Cation exchange was successful at room temperature and mild hydrothermal conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel 3D framework indium phosphite-oxalate based on a pcu-type topology

A new inorganic–organic hybrid indium phosphite-oxalate, formulated as H[In{sub 5}(HPO{sub 3}){sub 6}(H{sub 2}PO{sub 3}){sub 2}(C{sub 2}O{sub 4}){sub 2}]·(C{sub 4}N{sub 2}H{sub 11}){sub 2}·H{sub 2}O 1 has been hydrothermally synthesized in the presence of piperazine acting as a structure directing agent (SDA). The single crystal X-ray diffraction reveals that compound 1 shows three-dimensional open-framework with intersecting 12-ring channels along the [010] and [001] directions, which is constructed from strictly alternating double 6-ring units (D6Rs), [C{sub 2}O{sub 4}]{sup 2−} groups and [H{sub 2}PO{sub 3}]{sup −} pseudo-pyramids. It is noted that the classical D6R SBU is firstly reported in main metal phosphite/phosphite-oxalate. By regarding D6R as the 6-connected nodes, the inorganic–organic hybrid framework is based on a pcu-type topology. The as-synthesized product was characterized by single-crystal X-ray diffraction, powder X-ray diffraction, IR spectroscopy, thermogravimetric analysis (TGA), ICP-AES and elemental analyses. - Graphical abstract: A 3D open-framework indium phosphite-oxalate has been synthesized under hydrothermal conditions. A classical SBU, D6R, is present in the structure. By regarding D6R as the 6-connected nodes, the inorganic–organic hybrid framework is based on a pcu-type topology. - Highlights: • A new indium phosphite-oxalate based on a pcu-type topology has been synthesized. • A classical SBU, D6R, is present in the structure. • The classical SBU is firstly reported in main metal phosphite/phosphite-oxalate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flux growth and magnetic properties of rare earth cobalt germanide, RE{sub 6}Co{sub 5}Ge{sub 1+x}Al{sub 3−x} (RE=Pr, Nd; x≈0.8)

The intermetallic compounds RE{sub 6}Co{sub 5}Ge{sub 1+x}Al{sub 3−x} (RE=Pr{sub ,} Nd) were synthesized from the reaction of germanium and aluminum in RE/Co eutectic flux. These phases crystallize with the Nd{sub 6}Co{sub 5}Ge{sub 2.2} structure type in hexagonal space group P-6m2 (a=9.203(2)Å, c=4.202(1) Å, R{sub 1}=0.0109 for Pr{sub 6}Co{sub 5}Ge{sub 1.80}Al{sub 2.20}; and a=9.170(3) Å, c=4.195(1) Å, R{sub 1}=0.0129 for Nd{sub 6}Co{sub 5}Ge{sub 1.74}Al{sub 2.26}). The structure features chains of face-sharing Ge@RE{sub 9} clusters intersecting hexagonal cobalt nets linked by aluminum atoms. Magnetic susceptibility measurements indicate that both phases exhibit ferromagnetic ordering of the cobalt layers with T{sub C} in the range of 130–140 K. The magnetic moments of the rare earth ions order at lower temperature (30–40 K). Magnetic measurements on oriented crystals of Nd{sub 6}Co{sub 5}Ge{sub 1.74}Al{sub 2.26} show a strong preference of the moments to order along the c-axis. - Graphical abstract: RE{sub 6}Co{sub 5}Ge{sub 1+x}Al{sub 3−x} (RE=Pr{sub ,} Nd) were grown as large crystals from reactions of Ge and Al in RE/Co eutectic melts. Magnetic measurements indicate ordering of the 2-D cobalt nets at 130–140 K, and ordering of the rare earth moments at 30–40 K. Display Omitted - Highlights: • RE{sub 6}Co{sub 5}Ge{sub 1+x}Al{sub 3−x} (RE=Pr{sub ,} Nd) grown as large crystals from RE/Co eutectic flux. • RE{sub 6}Co{sub 5}Ge{sub 1+x}Al{sub 3−x} structure features hexagonal cobalt nets stacked along c-axis. • Cobalt layers order ferromagnetically with T{sub c}=130–140 K. • Rare earth magnetic moments order at low temperature (30–40 K).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas hydrate reservoirs and gas migration mechanisms in the Terrebonne Basin, Gulf of Mexico

Here, the interactions of microbial methane generation in fine-grained clay-rich sediments, methane migration, and gas hydrate accumulation in coarse-grained, sand-rich sediments are not yet fully understood. The Terrebonne Basin in the northern Gulf of Mexico provides an ideal setting to investigate the migration of methane resulting in the formation of hydrate in thin sand units interbedded with fractured muds. Using 3D seismic and well log data, we have identified several previously unidentified hydrate bearing units in the Terrebonne Basin. Two units are >100 m- thick fine-grained clay-rich units where gas hydrate occurs in near-vertical fractures. In some locations, these fine-grained units lack fracture features, and they contain 1-4-m thick hydrate bearing-sands. In addition, several other thin sand units were identified that contain gas hydrate, including one sand that was intersected by a well at the location of a discontinuous bottom-simulating reflector. Using correlation of well log data to seismic data, we have mapped and described these new units in detail across the extent of the available data, allowing us to determine the variation of seismic amplitudes and investigate the distribution of free gas and/or hydrate. We present several potential source-reservoir scenarios between the thick fractured mud units and thin hydrate bearing sands. We observe that hydrate preferentially forms within thin sand layers rather than fractures when sands are present in larger marine mud units. Based on regional mapping showing the patchy lateral extent of the thin sand layers, we propose that diffusive methane migration or short-migration of microbially generated methane from the marine mud units led to the formation of hydrate in these thin sands, as discontinuous sands would not be conducive to long-range migration of methane from deeper reservoirs.

03 NATURAL GAS↗