Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kinetic Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

New insights into the low-temperature oxidation of 2-methylhexane

The low-temperature oxidation of a stoichiometric 2-methylhexane/O 2 /Ar mixture was examined in a jet-stirred reactor coupled with synchrotron vacuum UV photoionization molecular-beam MS. The initial gas mixture was composed of 2% 2-methyhexane, 22% O 2 and 76% Ar and the pressure of the reactor was kept at 780 Torr. Low-temperature oxidation intermediates with two to five oxygen atoms were observed. The detection of C 7 H 14 O 5 and C 7 H 12 O 4 species suggests that a third O 2 addition process occurs in 2-methylhexane low-temperature oxidation. A detailed kinetic model was developed that describes the third O 2 addition and subsequent reactions leading to C 7 H 14 O 5 (keto-dihydroperoxide and dihydroperoxy cyclic ether) and C 7 H 12 O 4 (diketo-hydroperoxide and keto-hydroperoxy cyclic ether) species. The kinetics of the third O 2 addition reactions are discussed and model calculations were performed that reveal that third O 2 addition reactions promote 2-methylhexane auto-ignition at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refined Outgassing Model for the LiH/LiOH System

Previous models for H 2 and H 2 O outgassing from moisture exposed LiH specimens were based on temperature programmed desorption/decomposition (TPD) experiments and analyses that yielded kinetic descriptions which were specific to defined sets of initial conditions. Subsequently the inputs to the kinetic models were refined to correlate with infrared spectra of the adsorbed species. In this current enhancement, better agreement between prediction and experiment was obtained through: 1) refining the reaction mechanisms for some of the decomposition reactions; 2) developing the potential range of kinetic parameters by simultaneous fitting of all the TPD outgassing curves obtained at different heating rates; and, 3) limiting the scope of possible kinetic parameters to an optimized subset by matching the outgassing prediction curves at 3 different temperatures to the outcomes from the accurate but cumbersome, non-intuitive, and effort demanding isoconversional analysis.

36 MATERIALS SCIENCE↗

Thermal-Hydraulic Simulations of Single Pin and Assembly Sector for IVG- 1M Reactor

Thermal-hydraulic simulations have been performed using computational fluid dynamics (CFD) for the highly-enriched uranium (HEU) design of the IVG.1M reactor at the Institute of Atomic Energy (IAE) at the National Nuclear Center (NNC) in the Republic of Kazakhstan. Steady-state simulations were performed for both types of fuel assembly (FA), i.e. the FA in rows 1 & 2 and the FA in row 3, as well as for single pins in those FA (600 mm and 800 mm pins). Both single pin calculations and bundle sectors have been simulated for the most conservative operating conditions corresponding to the 10 MW output power, which corresponds to a pin unit cell Reynolds number of only about 7500. Simulations were performed using the commercial code STAR-CCM+ for the actual twisted pin geometry as well as a straight-pin approximation. Various Reynolds-Averaged Navier-Stokes (RANS) turbulence models gave different results, and so some validation runs with a higher-fidelity Large Eddy Simulation (LES) code were performed given the lack of experimental data. These singled out the Realizable Two-Layer k-ε as the most accurate turbulence model for estimating surface temperature. Single-pin results for the twisted case, based on the average flow rate per pin and peak pin power, were conservative for peak clad surface temperature compared to the bundle results. Also the straight-pin calculations were conservative as compared to the twisted pin simulations, as expected, but the single-pin straight case was not always conservative with regard to the straight-pin bundle. This was due to the straight-pin temperature distribution being strongly influenced by the pin orientation, particularly near the outer boundary. The straight-pin case also predicted the peak temperature to be in a different location than the twisted-pin case. This is a limitation of the straight-pin approach. The peak temperature pin was in a different location from the peak power pin in every case simulated, and occurred at an inner pin just before the enrichment change. The 600 mm case demonstrated a peak clad surface temperature of 370.4 K, while the 800 mm case had a temperature of 391.6 K. These temperatures are well below the necessary temperatures for boiling to occur at the rated pressure. Fuel temperatures are also well below the melting point. Future bundle work will include simulations of the proposed low-enriched uranium (LEU) design. Two transient scenarios were also investigated for the single-pin geometries. Both were “model” problems that were focused on pure thermal-hydraulic behavior, and as such were simple power changes that did not incorporate neutron kinetics modeling. The first scenario was a high-power, ramp increase, while the second scenario was a low-power, step increase. A cylindrical RELAP model was also constructed to investigate its accuracy as compared to the higher-fidelity CFD. Comparisons between the two codes showed good agreement for peak temperatures in the fuel and at the cladding surface for both cases. In the step transient, temperatures at four axial levels were also computed. These showed greater but reasonable discrepancy, with RELAP outputting higher temperatures. These results provide some evidence that RELAP can be used with confidence in modeling transients for IVG.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

In-Cylinder Diagnostics to Overcome Efficiency Barriers in Natural Gas Engines (LDRD 200166)

The high-level objective of this project is to solve national-security problems associated with petroleum use, cost, and environmental impacts by enabling more efficient use of natural-gas-fueled internal combustion engines. An improved science-base on end-gas autoignition, or “knock,” is required to support engineering of more efficient engine designs through predictive modeling. An existing optical diesel engine facility is retrofitted for natural gas fueling with laser-spark-ignition combustion to provide in-cylinder imaging and pressure data under knocking combustion. Zero-dimensional chemical-kinetic modeling of autoignition, adiabatically constrained by the measured cylinder pressure, isolates the role of autoignition chemistry. OH* chemiluminescence imaging reveals six different categories of knock onset that depend on proximity to engine surfaces and the in-cylinder deflagration. Modeling results show excellent prediction regardless of the knock category, thereby validating state-of-the-art kinetic mechanisms. The results also provide guidance for future work to build a science base on the factors that affect the deflagration rate.

33 ADVANCED PROPULSION SYSTEMS↗

Reaction kinetic analysis of the 3-hydroxypropionate/4-hydroxybutyrate CO 2 fixation cycle in extremely thermoacidophilic archaea

Here, the 3-hydroxypropionate/4-hydroxybutyrate (3HP/4HB) cycle fixes CO 2 in extremely thermoacidophilic archaea and holds promise for metabolic engineering because of its thermostability and potentially rapid pathway kinetics. A reaction kinetics model was developed to examine the biological and biotechnological attributes of the 3HP/4HB cycle as it operates in Metallosphaera sedula, based on previous information as well as on kinetic parameters determined here for recombinant versions of five of the cycle enzymes (malonyl-CoA/succinyl-CoA reductase, 3-hydroxypropionyl-CoA synthetase, 3-hydroxypropionyl-CoA dehydratase, acryloyl-CoA reductase, and succinic semialdehyde reductase). The model correctly predicted previously observed features of the cycle: the 35%–65% split of carbon flux through the acetyl-CoA and succinate branches, the high abundance and relative ratio of acetyl-CoA/propionyl-CoA carboxylase (ACC) and MCR, and the significance of ACC and hydroxybutyryl-CoA synthetase (HBCS) as regulated control points for the cycle. The model was then used to assess metabolic engineering strategies for incorporating CO 2 into chemical intermediates and products of biotechnological importance: acetyl-CoA, succinate, and 3-hydroxyproprionate.

3-hydroxypropionate↗

Chain Elongation during Thermolysis of Tetrafluoroethylene and Hexafluoropropylene: Modeling of Mechanistic Hypotheses and Elucidation of Data Needs

Thermolysis of tetrafluoroethylene at 500 oC is well-known to lead to equilibration with octafluorocyclobutane; at 600 oC this mixture forms hexafluoropropylene; and at slightly more forcing conditions the latter is converted to octafluoroisobutylene (and/or octafluoro-2-butene). This chain-elongation behavior contrasts with the familiar cracking of non-fluorinated olefins and the thermodynamic rationale is provided herein. Several mechanisms have been proposed in the literature without a clear choice. Kinetic modeling herein of available product/kinetic data with use of current thermochemical and kinetic parameters supports a key role for difluorocarbene formed from dissociation of tetrafluoroethylene. Arbitrary selection between unfortunately inconsistent available measurements and/or computations of elementary rate constants, with modest adjustments, allowed data matches with either a direct insertion into an olefinic C-F bond or an addition to the olefin to give a 1,3-biradical followed by a 1,2-fluorine shift. In contrast, a 1,2-fluorine shift in the starting olefin to generate a carbene, followed by carbene combination, seems unlikely. However, the modeling was only a limited success, especially for hexafluoropropylene as feed which seems a comparatively inefficient source of difluorocarbene. This highlights the need for improved experimental thermolysis data at low conversion, independent elementary rate constants for key steps, and especially enthalpies of formation of fluorocarbons and their reactive intermediates.

36 MATERIALS SCIENCE↗

Preparation of surface modified zinc oxide nanoparticle with high capacity dye removal ability

Highlights: ► Amine-functionalized zinc oxide nanoparticle (AFZON) was synthesized. ► Isotherm and kinetics data followed Langmuir isotherm and pseudo-second order kinetic model, respectively. ► Q{sub 0} of ZON for AB25, DR23 and DR31 was 20, 12 and 15 mg/g, respectively. ► Q{sub 0} of AFZON for AB25, DR23 and DR31 was 1250, 1000 and 1429 mg/g, respectively. ► AFZON was regenerated at pH 12. -- Abstract: In this paper, the surface modification of zinc oxide nanoparticle (ZON) by amine functionalization was studied to prepare high capacity adsorbent. Dye removal ability of amine-functionalized zinc oxide nanoparticle (AFZON) and zinc oxide nanoparticle (ZON) was also investigated. The physical characteristics of AFZON were studied using Fourier transform infrared (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). Acid Blue 25 (AB25), Direct Red 23 (DR23) and Direct Red 31 (DR31) were used as model compounds. The effect of operational parameters such as dye concentration, adsorbent dosage, pH and salt on dye removal was evaluated. The isotherm and kinetic of dye adsorption were studied. The maximum dye adsorption capacity (Q{sub 0}) was 20 mg/g AB25, 12 mg/g DR23 and 15 mg/g DR31 for ZON and 1250 mg/g AB25, 1000 mg/g DR23 and 1429 mg/g DR31 for AFZON. It was found that dye adsorption followed Langmuir isotherm. Adsorption kinetic of dyes was found to conform to pseudo-second order kinetics. Dye desorption tests (adsorbent regeneration) showed that the maximum dye release of 90% AB25, 86% for DR23 and 90% for DR31 were achieved in aqueous solution at pH 12. Based on the data of the present investigation, it can be concluded that the AFZON being an adsorbent with high dye adsorption capacity might be a suitable alternative to remove dyes from colored aqueous solutions.

36 MATERIALS SCIENCE↗

Elucidating the photodissociation fingerprint and quantifying the determination of organic hydroperoxides in gas-phase autoxidation

Hydroperoxides are formed in the atmospheric oxidation of volatile organic compounds, in the combustion autoxidation of fuel, in the cold environment of the interstellar medium, and also in some catalytic reactions. They play crucial roles in the formation and aging of secondary organic aerosols and in fuel autoignition. However, the concentration of organic hydroperoxides is seldom measured, and typical estimates have large uncertainties. In this work, we developed a mild and environmental-friendly method for the synthesis of alkyl hydroperoxides (ROOH) with various structures, and we systematically measured the absolute photoionization cross-sections (PICSs) of the ROOHs using synchrotron vacuum ultraviolet-photoionization mass spectrometry (SVUV-PIMS). A chemical titration method was combined with an SVUV-PIMS measurement to obtain the PICS of 4-hydroperoxy-2-pentanone, a typical molecule for combustion and atmospheric autoxidation ketohydroperoxides (KHPs). We found that organic hydroperoxide cations are largely dissociated by loss of OOH. This fingerprint was used for the identification and accurate quantification of the organic peroxides, and it can therefore be used to improve models for autoxidation chemistry. The synthesis method and photoionization dataset for organic hydroperoxides are useful for studying the chemistry of hydroperoxides and the reaction kinetics of the hydroperoxy radicals and for developing and evaluating kinetic models for the atmospheric autoxidation and combustion autoxidation of the organic compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probabilistic effects of porosity and chemical kinetics on the shock initiation of an octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) based explosive

In this work, we investigate the effects of porosity and chemical reactivity on the shock initiation of an HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine)-based polymer bonded explosive due to thin flyer impact using two-dimensional mesoscale simulations. Microstructural samples are computationally generated, and the calculated shock response is compared to experiments. The sample dimensions are 0.1×1.05 mm 2 , and each sample accounts for grain scale heterogeneities, including randomized grain morphology and pore spacing. Simulations are performed using the Lawrence Livermore National Laboratory (LLNL) arbitrary Lagrangian–Eulerian multi-physics code ALE3D. Chemistry and equation of states are handled with LLNL's thermochemical code Cheetah. We employ a modified Arrhenius-based chemical kinetics model that scales the temperature exponent fitting parameter with flyer shock conditions. This new model is calibrated to the mean response of experimental shock initiation thresholds for three separate Kapton flyer thicknesses. A simplified shock initiation criterion is proposed, which classifies the macroscale initiation response based on cross-sectional temperature profiles of the shocked sample. This criterion is used to further investigate the probabilistic response of the sample to variations in the mean porosity and chemical kinetics rate, and we find an inverse correlation between the shock pressure and the confidence interval of the experimental threshold velocity. Furthermore, the methodology presented in this work for quantifying the probabilistic nature of shock initiation is material agnostic. These mesoscale studies may be used to inform continuum scale models and expedite the development of future, tailored energetic formulations.

36 MATERIALS SCIENCE↗

Implementation of new mixture rules has a substantial impact on combustion predictions for H 2 and NH 3

Complex-forming reactions comprise a substantial fraction of all important combustion reactions and are central to combustion behavior. Despite being often called “pressure-dependent” reactions, their rate constants depend on not only the pressure but also the composition. While modern combustion codes allow arbitrarily high accuracy in treating pressure dependence, recent work has consistently demonstrated dramatic failures of essentially all available treatments of mixture dependence. In situations where mixture dependence is treated at all, it is inevitably treated through specification of pressure-dependent rate constants for a set of pure bath gases, which are then combined to estimate the rate constant in a mixture via a “mixture rule.” While there had been a generally unquestioning confidence in these mixture rules, they had, in reality, been scarcely tested until the last decade, when comparisons against master equation calculations revealed order-of-magnitude errors for important pressure-dependent reactions. New mixture rules, based on the reduced pressure, have recently been proposed and shown to reproduce master equation calculations for broad classes of complex-forming reactions very accurately. Here, in this work, we present an implementation of one such new mixture rule (“LMR-R”) in Cantera and then use it to enable simulations that use new high-accuracy ab initio data for individual bath gases (for the first time, since codes previously could not accommodate the complex bath gas dependence). Demonstrations focus on combustion of H 2 and NH 3 , where (1) high-accuracy ab initio data are available and (2) the impact is expected to be large due to the high fractions of efficient colliders (e.g., H 2 O and NH 3 ) in the burned and unburned gases. Indeed, we find the impact of this treatment to be substantial and may explain previous modeling difficulties for these important carbon-free fuels, particularly for NH 3 , whose extraordinarily high third-body efficiency (~20) is often omitted from kinetic models.

Ammonia↗

Morphological Evolution of Nanocluster Aggregates and Single Crystals in Alkaline Zinc Electrodeposition

The morphology of Zn electrodeposits is studied on carbon-coated transmission electron microscopy grids. At low over-potentials (eta = -50 mV), the morphology develops by aggregation at two distinct length scales: similar to 5 nm diameter monocrystalline nanoclusters form similar to 50 nm diameter polycrystalline aggregates, and the aggregates form a branched network. Epitaxial (00 (0) over bar2) growth above an overpotential of vertical bar eta(c)vertical bar > 125 mV leads to the formation of hexagonal single crystals up to 2 mu m in diameter. Potentiostatic current transients were used to calculate the nucleation rate from Scharifker et al.'s model. The exp(eta) dependence of the nucleation rates indicates that atomistic nucleation theory explains the nucleation process better than Volmer-Weber theory. A kinetic model is provided using the rate equations of vapor solidification to simulate the evolution of the different morphologies. On solving these equations, we show that aggregation is attributed to cluster impingement and cluster diffusion while single-crystal formation is attributed to direct attachment.

Desai, D↗

On Hamiltonian and Action Principle Formulations of Plasma Dynamics

A general discussion of Hamiltonian and action principle formulations for fluid and plasma models is given. A procedure, based on Hamilton's principle of mechanics but adapted for continua, for the construction of action principles for fluid and kinetic models is given. The transformation from action principles in terms of the Lagrangian variable description to the Eulerian variable description in terms of noncanonical Poisson brackets is described. Two examples are developed: ideal MHD and Braginskii's fluid model with gyroviscosity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pore-Scale Study on the Positive Feedback Between Stress and Porosity Caused by Pressure Solution in Porous Media

Pressure solution is an important process in the evolution of sedimentary rocks, which provide storage space for most of our petroleum resources. It directly influences the generation, migration, and storage of petroleum fluids in subsurface sedimentary rocks. Here, in this paper, we develop a pore-scale, mechanochemical model to demonstrate a possible positive feedback between the local porosity and pore surface stress, in which a higher local porosity causes a higher local pore surface stress, thus enhancing pressure solution and consequently further increasing the local porosity. Pore surface stress represents stress on a solid grain adjacent to a pore. Specifically, the pore-scale, mechanochemical model directly simulates the stress distribution over solid and pore surfaces using a finite element model. The dissolution of solids at the solid-pore interfaces under a far-from-equilibrium condition is simulated using a first-order kinetics model that accounts for the local stress distribution. The updated pore geometry, caused by pore surface dissolution, is then used in the stress simulation in the next numerical iteration. Two types of porous media, the Oriskany sandstone and an artificial porous medium with spherical pores, were tested in the mechanochemical simulation. The positive stress-porosity feedback during pressure solution was observed in both samples. In addition, the model quantitatively illustrated the distribution of local mineral dissolution rates on all pore surfaces, as well as its relation to the effective mineral dissolution rate of the entire sample. Based on the comparison between the two porous media, the local mineral dissolution was regulated by pore space distribution, geometry, and coalescence during pressure solution. This work is the first that uses direct, pore-scale numerical simulation to demonstrate the positive stress-porosity feedback during pressure solution, which has the potential to advance the understanding of the mechanical-chemical (MC) coupling in many geological processes that are relevant to subsurface energy systems, such as the recovery of petroleum hydrocarbons and geothermal energy.

CT scanning↗

Solar Reforming of Carbon Dioxide to Produce Diesel Fuel

This project focused on the demonstration of an innovative technology, referred to as the Sunexus CO2 Solar Reformer, which utilizes waste CO2 as a feedstock for the efficient and economical production of synthetic diesel fuel using solar thermal energy as the primary energy input. The Sunexus technology employs a two stage process for the conversion of CO2 to diesel fuel. A solar reforming system, including a specially designed reactor and proprietary CO2 reforming catalyst, was developed and used to convert captured CO2 rich gas streams into syngas (primarily hydrogen and carbon monoxide) using concentrated solar energy at high conversion efficiencies. The second stage of the system (which has been demonstrated under other funding) involves the direct conversion of the syngas into synthetic diesel fuel using a proprietary catalyst (Terra) previously developed and validated by Pacific Renewable Fuels and Chemicals (PRFC). The overall system energy efficiency for conversion of CO2 to diesel fuel is 74%, due to the use of solar energy. The results herein describe modeling, design, construction, and testing of the Sunexus CO2 Solar Reformer. Extensive parametric testing of the solar reformer and candidate catalysts was conducted and chemical kinetic models were developed. Laboratory testing of the Solar Reformer was successfully completed using various gas mixtures, temperatures, and gas flow rates/space velocities to establish performance metrics which can be employed for the design of commercial plants. A variety of laboratory tests were conducted including dry reforming (CO2 and CH{sub 4}), combination dry/steam reforming (CO2, CH{sub 4} & H{sub 2}O), and tri-reforming (CO2, CH{sub 4}, H{sub 2}O & O{sub 2}). CH{sub 4} and CO2 conversions averaged 95-100% and 50-90% per reformer cycle, respectively, depending upon the temperatures and gas space velocities. No formation of carbon deposits (coking) on the catalyst was observed in any of these tests. A 16 ft. diameter, concentrating solar dish was modified to accommodate the Sunexus CO2 Solar Reformer and the integrated system was installed at the Pacific Renewable Fuels and Chemicals test site at McClellan, CA. Several test runs were conducted without catalyst during which the ceramic heat exchanger in the Sunexus Solar Reformer reached temperatures between 1,050 F (566 C) and 2,200 F (1,204 C) during the test period. A dry reforming mixture of CO2/CH{sub 4} (2.0/1.0 molar ratio) was chosen for all of the tests on the integrated solar dish/catalytic reformer during December 2010. Initial tests were carried out to determine heat transfer from the collimated solar beam to the catalytic reactor. The catalyst was operated successfully at a steady-state temperature of 1,125 F (607 C), which was sufficient to convert 35% of the 2/1 CO2/CH{sub 4} mixture to syngas. This conversion efficiency confirmed the results from laboratory testing of this catalyst which provided comparable syngas production efficiencies (40% at 1,200 F [650 C]) with a resulting syngas composition of 20% CO, 16% H{sub 2}, 39% CO2 and 25% CH{sub 4}. As based upon the laboratory results, it is predicted that 90% of the CO2 will be converted to syngas in the solar reformer at 1,440 F (782 C) resulting in a syngas composition of 50% CO: 43% H{sub 2}: 7% CO2: 0% CH{sub 4}. Laboratory tests show that the higher catalyst operating temperature of 1,440 F (782 C) for efficient conversion of CO2 can certainly be achieved by optimizing solar reactor heat transfer, which would result in the projected 90% CO2-to-syngas conversion efficiencies. Further testing will be carried out during 2011, through other funding support, to further optimize the solar dish CO2 reformer. Additional studies carried out in support of this project and described in this report include: (1) An Assessment of Potential Contaminants in Captured CO2 from Various Industrial Processes and Their Possible Effect on Sunexus CO2 Reforming Catalysts; (2) Recommended Measurement Methods for Assessing Contaminant Levels in Captured CO2 Streams; (3) An Assessment of Current Commercial Scale Fisher-Tropsch (F-T) Technologies for the Conversion of Syngas to Fuels; (4) An Overview of CO2 Capture Technologies from Various Industrial Sources; and (5) Lifecycle Analysis for the Capture and Conversion of CO2 to Synthetic Diesel Fuel. Commercial scale Sunexus CO2 Solar Reformer plant designs, proposed in this report, should be able to utilize waste CO2 from a wide variety of industrial sources to produce a directly usable synthetic diesel fuel that replaces petroleum derived fuel, thus improving the United States energy security while also sequestering CO2. Our material balance model shows that every 5.0 lbs of CO2 is transformed using solar energy into 6.26 lbs (1.0 U.S. gallon) of diesel fuel and into by-products, which includes water. Details are provided in the mass and energy model in this report.

03 NATURAL GAS↗

Patient-specific modeling of individual sickle cell behavior under transient hypoxia

Sickle cell disease (SCD) is a highly complex genetic blood disorder in which red blood cells (RBC) exhibit heterogeneous morphology changes and decreased deformability. We employ a kinetic model for cell morphological sickling that invokes parameters derived from patient-specific data. This model is used to investigate the dynamics of individual sickle cells in a capillary-like microenvironment in order to address various mechanisms associated with SCD. We show that all RBCs, both hypoxia-unaffected and hypoxia-affected ones, regularly pass through microgates under oxygenated state. However, the hypoxia-affected cells undergo sickling which significantly alters cell dynamics. In particular, the dense and rigid sickle RBCs are obstructed thereby clogging blood flow while the less dense and deformable ones are capable of circumnavigating dead (trapped) cells ahead of them by choosing a serpentine path. Informed by recent experiments involving microfluidics that provide in vitro quantitative information on cell dynamics under transient hypoxia conditions, we have performed detailed computational simulations of alterations to cell behavior in response to morphological changes and membrane stiffening. Our model reveals that SCD exhibits substantial heterogeneity even within a particular density-fractionated subpopulation. These findings provide unique insights into how individual sickle cells move through capillaries under transient hypoxic conditions, and offer novel possibilities for designing effective therapeutic interventions for SCD.

59 BASIC BIOLOGICAL SCIENCES↗

Concepts Relevant for the Kinetic Analysis of Reversible Reaction Systems

The net rate of a reversible chemical reaction is the difference between unidirectional rates of traversal along forward and reverse reaction paths. In a multistep reaction sequence, the forward and reverse trajectories, in general, are not the microscopic reverse of one another; rather, each unidirectional route is comprised of distinct rate-controlling steps, intermediates, and transition states. Consequently, traditional descriptors of rate (e.g., reaction orders) do not reflect intrinsic kinetic information but instead conflate unidirectional contributions determined by (i) the microscopic occurrence of forward/reverse reactions (i.e., unidirectional kinetics) and (ii) the reversibility of reaction (i.e., nonequilibrium thermodynamics). This review aims to provide a comprehensive resource of analytical and conceptual tools which deconvolute the contributions of reaction kinetics and thermodynamics to disambiguate unidirectional reaction trajectories and precisely identify rate- and reversibility-controlling molecular species and steps in reversible reaction systems. The extrication of mechanistic and kinetic information from bidirectional reactions is accomplished through equation-based formalisms (e.g., De Donder relations) grounded in principles of thermodynamics and interpreted in the context of theories of chemical kinetics developed in the past 25 years. Here, the aggregate of mathematical formalisms detailed herein is general to thermochemical and electrochemical reactions and encapsulates a diverse body of scientific literature encompassing chemical physics, thermodynamics, chemical kinetics, catalysis, and kinetic modeling.

42 ENGINEERING↗

A Comparative Study of Eight Finite-Rate Chemistry Kinetics for CO/H-2 Combustion

We compare the performance and computational cost of 8 kinetic models (3 global and 5 elementary) that describe the finite-rate chemistry of syngas combustion. We apply them in simulating a turbulent jet flame with syngas diluted by 30% nitrogen. We model the turbulence by a modified k-epsilon model and the turbulence-chemistry interaction by the partially stirred reactor approach. To integrate the chemistry equations, we nominally use explicit fifth-order embedded Runge-Kutta ODE solver. But semi-implicit Bulirsch-Stoer and implicit Euler were also used. The computational time depends on the number of reaction steps and the ODE solver. Five models overpredict the maximum flame temperature (by 200 K-320 K). Two models underpredict it by 240 K and 580 K. The global model that is based on the Westbrook-Dryer (1981) model for hydrocarbon fuels gives the best agreement with measurements, and also has low computational demand. Therefore, it is recommended for modeling turbulent syngas flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗