Search NASA⌕ Search

SEARCH · Search NASA

Results for “MatLab”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing. The mooring motion has been removed from the stream-wise and vertical velocity signals (u, w). The lateral (v) velocity may have some 'persistent motion contamination' due to mooring sway. The ADV was positioned 11m above the seafloor in 58m of water at 48.1515N, 122.6858W. Units ------ - Velocity data (_u, urot, uacc) is in m/s. - Acceleration (Accel) data is in m/s^2. - Angular rate (AngRt) data is in rad/s. - The components of all vectors are in 'ENU' orientation. That is, the first index is True East, the second is True North, and the third is Up (vertical). - All other quantities are in the units defined in the Nortek Manual. Motion correction and rotation into the ENU earth reference frame was performed using the Python-based open source DOLfYN library (linked in resources). Details on motion correction can be found there. For additional details on this dataset see the included Marine Energy Technology Symposium paper.

16 TIDAL AND WAVE POWER↗

Admiralty Inlet Advanced Turbulence Measurements: June 2014

This data is from measurements at Admiralty Head, in Admiralty Inlet (Puget Sound) in June of 2014. The measurements were made using Inertial Motion Unit (IMU) equipped ADVs mounted on Tidal Turbulence Mooring's (TTMs). The TTM positions the ADV head above the seafloor to make mid-depth turbulence measurements. The inertial measurements from the IMU allows for removal of mooring motion in post processing. The mooring motion has been removed from the stream-wise and vertical velocity signals (u, w). The lateral (v) velocity has some 'persistent motion contamination' due to mooring sway. Each ttm was deployed with two ADVs. The 'top' ADV head was positioned 0.5m above the 'bottom' ADV head. The TTMs were placed in 58m of water. The position of the TTMs were: ttm01 : (48.1525, -122.6867) ttm01b : (48.15256666, -122.68678333) ttm02b : (48.152783333, -122.686316666) Deployments TTM01b and TTM02b occurred simultaneously and were spaced approximately 50m apart in the cross-stream direction. Units ----- - Velocity data (_u, urot, uacc) is in m/s. - Acceleration (Accel) data is in m/s^2. - Angular rate (AngRt) data is in rad/s. - The components of all vectors are in 'ENU' orientation. That is, the first index is True East, the second is True North, and the third is Up (vertical). - All other quantities are in the units defined in the Nortek Manual. Motion correction and rotation into the ENU earth reference frame was performed using the Python-based open source DOLfYN library (http://lkilcher.github.io/dolfyn/). Details on motion correction can be found there. Additional details on TTM measurements at this site can be found in the included Marine Energy Technology Symposium paper.

16 TIDAL AND WAVE POWER↗

Admiralty Inlet Advanced Turbulence Measurements: May 2015

This data is from measurements at Admiralty Head, in Admiralty Inlet (Puget Sound) in May of 2015. The measurements were made using Inertial Motion Unit (IMU) equipped ADVs mounted on a 'StableMoor' (Manufacturer: DeepWater Buoyancy) buoy and a Tidal Turbulence Mooring (TTM). These platforms position ADV heads above the seafloor to make mid-depth turbulence measurements. The inertial measurements from the IMU allows for removal of mooring motion in post processing. The mooring and buoy motion has been removed from the stream-wise and vertical velocity signals (u, w). The lateral (v) velocity has some 'persistent motion contamination' due to mooring sway. The TTM was deployed with one ADV, it's position was: 48 09.145', -122 41.209' The StableMoor was deployed twice, the first time it was deployed in 'wing-mode' with two ADVs ('Port' and 'Star') at: 48 09.166', -122 41.173' The second StableMoor deployment was in 'Nose' mode with one ADV at: 48 09.166', -122 41.174' Units ----- - Velocity data (_u, urot, uacc) is in m/s. - Acceleration (Accel) data is in m/s^2. - Angular rate (AngRt) data is in rad/s. - The components of all vectors are in 'ENU' orientation. That is, the first index is True East, the second is True North, and the third is Up (vertical). - All other quantities are in the units defined in the Nortek Manual. Motion correction and rotation into the ENU earth reference frame was performed using the Python-based open source DOLfYN library (http://lkilcher.github.io/dolfyn/). Details on motion correction can be found there. Additional details on TTM measurements at this site can be found in the included Marine Energy Technology Symposium paper.

16 TIDAL AND WAVE POWER↗

Underwater Mapping Results for Seabotix vLBV300 Vehicle with Tritech Gemini 720i Imaging Sonar near Newport, OR

This document presents results from tests to demonstrate underwater mapping capabilities of an underwater vehicle in conditions typically found in marine renewable energy arrays. These tests were performed with a tethered Seabotix vLBV300 underwater vehicle. The vehicle is equipped with an inertial navigation system (INS) based on a Gladiator Landmark 40 IMU and Teledyne Explorer Doppler Velocity Log, as well as a Gemini 720i scanning sonar acquired from Tritech. The results presented include both indoor pool and offshore deployments. The indoor pool deployments were performed on October 7, 2016 and February 3, 2017 in Corvallis, OR. The offshore deployment was performed on April 20, 2016 off the coast of Newport, OR (44.678 degrees N, 124.109 degrees W). During the mission period, the sea state varied between 3 and 4, with an average significant wave height of 1.6 m. Data was recorded from both the INS and the sonar.

16 TIDAL AND WAVE POWER↗

AeroDyn V15.04: Design Tool for Wind and MHK Turbines

AeroDyn is a time-domain wind and MHK turbine aerodynamics module that can be coupled into the FAST version 8 multi-physics engineering tool to enable aero-elastic simulation of horizontal-axis wind turbines. AeroDyn V15.04 has been updated to include a cavitation check for MHK turbines, and can be driven as a standalone code to compute wind turbine aerodynamic response uncoupled from FAST. Note that while AeroDyn has been updated to v15.04, FAST v8.16 has not yet been updated and still uses AeroDyn v15.03.

16 TIDAL AND WAVE POWER↗

RivGen Wake Data, Igiugig, AK

Turbulence data collected in from a SWIFT drifter repeatedly released over the ORPC RivGen turbine

16 TIDAL AND WAVE POWER↗

Admiralty Inlet Advanced Turbulence Measurements: Final Data and Code Archive

Data and code that is not already in a public location that is used in Kilcher, Thomson, Harding, and Nylund (2017) "Turbulence Measurements from Compliant Moorings - Part II: Motion Correction" doi: 10.1175/JTECH-D-16-0213.1. The links point to Python source code used in the publication. All other files are source data used in the publication.

16 TIDAL AND WAVE POWER↗

Tidal Current Cross-flow Turbine Wake ADV and PIV Data

Measurements in the wake of a high-solidity cross-flow turbine in a laboratory flume obtained using Acoustic Doppler Velocimetry and Particle Image Velocimetry for the purposes of characterizing the turbine wake and comparing the methods.

16 TIDAL AND WAVE POWER↗

NWEI Azura RTI 1/20th Model Validation Wave Tank Test Data

Data from the 1/20th wave tank test of the RTI model. NWEI has licensed intellectual property from RTI, and modified the PTO and retested the 1/20th RTI model that was tested as part of the Wave Energy Prize. The goal of the test was to validate NWEI's simulation models of the model. The test occurred at the University of Maine in Orono.

16 TIDAL AND WAVE POWER↗

Focusing Wave Energy for Wave Energy Converter Applications

Wave tank tests at Stevens Institute of Technology quantified the ability of near-surface platforms to concentrate wave energy over the platform. Due to the instantaneous change in water depth, mass, energy, and power are conserved in this process. The energy and power concentration factors ranged from 1 to 4 times the incident wave power as a function of incident wave period, wave height, and platform depth. Platform slope was set to zero for all 300 plus wave runs at platform top surface depths varying from 0.15 m to 1.10 m. This data set is extremely valuable to the MHK industry as water particle velocities over the platform were recorded at velocities on the order of 4x incident maximum orbital velocities based on Airy/Navier-Stokes theory. This term has been used "A change in effective water depth over which waves propagate". The only way I have been able to get the data to align with Airy wave theory is to use the top of tension leg platform (TLP) depth and a wave height corresponding to the change in the free surface elevation over the platform. The discrete change in effective water depth over which waves propagate is a topic of interest for fundamental hydrodynamic research as this implies there is an instantaneous convergence of group and phase velocities of waves at the TLP edge which shears the incident waves. This high shear rate makes the inviscid and irrotational assumptions and potential flow analysis invalid. This data set can be used as part of benchmarking any CFD which may be used to analyze this flow field. Using the top of the TLP as the "h" and full free-surface elevation change over the platform for "H", the maximum orbital velocities measured align with Airy/Navier-Stokes equations. If the tank depth is used for "h", or incident wave height is used for "H", the equations do not align with the data. Note that the SurfWEC system involves a non-inertial reference frame as the fully-submerged TLP is continuously experiencing positive and negative accelerations in most wave conditions; therefore, when a spring-mass (regenerative AHC winch - float) system is used for PTO, the "pseudo" centrifugal force must be accounted for in the loading to the system.

16 TIDAL AND WAVE POWER↗

2017 Western Passage Tidal Energy Resource Characterization Measurements

These data are from tidal resource characterization measurements collected between April and July 2017 in Western Passage near Eastport, Maine, USA. The dataset contains the following four sub-datasets, each of which is described in more detail in the README.pdf. 1. A bottom-mounted Teledyne RDI Workhorse 600 kHz acoustic Doppler current profiler (ADCP) was deployed at 44.92015 N, 66.98915 W in ~50 m of water from 3 April to 18 July (106 days). Data were recorded in 6-minute increments in the ENU (East, magnetic North, Up) coordinate system with bin-mapping enabled. 2. A bottom-mounted Nortek Signature 500 kHz ADCP was deployed at 44.92192 N, 66.98913 W in ~50 m of water from 4 April to 18 July (105 days). Data were sampled and recorded at 2 Hz and recorded in the ENU (East, magnetic North, Up) coordinate system. 3. Between those stations along a cross-channel transect, a Stable Tidal Turbulence Mooring (STTM) positioned ~10 m above the seabed was deployed for one week during a spring tide. The STTM was outfitted with two Nortek Vector acoustic Doppler velocimeters equipped with inertial motion units (ADVs), a bottom-tracking downward-looking Teledyne RDI Workhorse 600 kHz ADCP to provide motion-corrected flow and turbulence characteristics at high temporal resolution, and an upward-looking Teledyne RDI Sentinel V20 ADCP. The STTM was deployed at 44.92098 N, 66.98922 W from 24-31 May. 4. A vessel-mounted Teledyne RDI Workhorse 300 kHz ADCP collected current data along three transects over two days, 4-5 April. The data processing used DOLfYN version 0.11.2. All hdf5 files (i.e., files ending in `.h5`) contained here can be opened using that version of DOLfYN (e.g., `dat = dolfyn.load('')`). All distances are in meters (e.g., depth, range, MLLW, hab, eta, z_), and all velocities in m/s. See the DOLfYN documentation https://lkilcher.github.io/dolfyn/), and/or the Nortek and Teledyne RDI documentation for additional details. Additional details on the dataset can be found in the README.pdf, including: - Format details of each data file. - How to regenerate the data-processing (using the files in the `wp2017_processing.zip` archive).

16 TIDAL AND WAVE POWER↗

Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber

The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control system and validate the attained improvements using wave tank and full scale testing. In parallel, we will bring along the development of a wave prediction system that is required to enable effective control and test it at full scale. The purposes of this report are to: 1. Plan and document the 1/25th scale device testing at the wave-tank facility; 2. Document the test article, setup and methodology, sensor and instrumentation, mooring, electronics, wiring, and data flow and quality assurance; 3. Communicate the testing results between the associated members; 4. Facilitate reviews that will help to ensure all aspects (risk, safety, testing procedures, etc.); 5. Provide a systematic guide to setting up, executing and decommissioning the experiment.

16 TIDAL AND WAVE POWER↗

ADCP Acoustic Interference Survey Data, Sequim Bay Inlet, WA

Raw ADCP (Acoustic Doppler Current Profiler) datasets from acoustic interference surveys with a TRDI Workhorse 300, a Nortek Signature500 and two Signature1000 instruments from August 2020. One Signature 1000 ADCP was deployed for 13 days on a bottom lander in Sequim Bay Inlet, WA. Data from the other three instruments were taken from a survey vessel running transects above the deployed lander.

16 TIDAL AND WAVE POWER↗

Small Scale WEC Performance Modeling Data

Small Scale WEC Performance Modeling Data is performance data from downscaled models of common WEC devices and their calculated performance outputs. This data is used by the Small WEC interactive modeling tool hosted by PRIMRE. The devices include a point absorber, a two-body point absorber (RM3), an oscillating surge device (OSWEC), and an attenuator type device (McCabe Wave Pump). One of the primary use cases for this work is to give an easy way to compare power output for a variety of WECs and model sizes.

16 TIDAL AND WAVE POWER↗

Millinocket Stream, Maine Velocity and Bathymetry Measurements 2021

ORPC staff collected site characterization data on Millinocket Stream, downstream of the hydropower station at the former Great Northern Paper Mill site in Millinocket, Maine. Bathymetry was collected with a SonTek M9 using HydroSurveyor software package and velocity was collected using the SonTek M9 RiverSurveyor software package. Bathymetry only was collected on 9/30/21. Bathymetry and velocity were collected on 10/21/21.

16 TIDAL AND WAVE POWER↗