Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Experimental investigation of grain boundaries misorientations and nano twinning induced strengthening on addition of silicon carbide in pulse electrodeposited nickel tungsten composite coating

Nanoindentation was performed on silicon carbide (SiC) reinforced pulse electrodeposited nickel-tungsten (Ni-W) composite coating. Addition of 5 vol.% of SiC in Ni-W coating increased the hardness from 10.31 ± 0.65 GPa to 14.32 ± 0.63 GPa and elastic modulus from 119.74 ± 3.15 GPa to 139.26 ± 2.09 GPa. Increased hardness and elastic modulus directly translates to the improved strengthening in the coating. An experimental investigation of strengthening mechanism was carried out in Ni-W-5 vol.% SiC alloy. Two simultaneous phenomena viz. grain refinement and increased internal strain was observed, which increased the dislocation density from 5.51 × 10{sup 18} m{sup −2} to 1.346 × 10{sup 19} m{sup −2} on reinforcement of 5 vol.% of SiC in Ni-W coating. Increased dislocation density promoted the formation of grain boundary misorientations and nano twinning. Low angle grain boundary, high angle grain boundary and nano twinning were identified using high resolution transmission electron microscope (HR-TEM) image and their role in strengthening mechanism was discussed in details. - Highlights: • SiC reinforced pulse electrodeposition Ni-W coating was deposited on steel. • Nanoindentation showed the increased mechanical properties on addition of SiC. • Grain refinement and increased internal strain was observed in Ni-W-SiC coating. • Dislocation density increased on reinforcement of SiC in Ni-W coating. • Increased dislocation density triggered grain boundary misorientation and twinning.

36 MATERIALS SCIENCE↗

Effect of cobalt doping on the mechanical properties of ZnO nanowires

In this work, we investigate the influence of doping on the mechanical properties of ZnO nanowires (NWs) by comparing the mechanical properties of pure and Co-doped ZnO NWs grown in similar conditions and having the same crystallographic orientation [0001]. The mechanical characterization included three-point bending tests made with atomic force microscopy and cantilever beam bending tests performed inside scanning electron microscopy. It was found that the Young's modulus of ZnO NWs containing 5% of Co was approximately a third lower than that of the pure ZnO NWs. Bending strength values were comparable for both materials and in both cases were close to theoretical strength indicating high quality of NWs. Dependence of mechanical properties on NW diameter was found for both doped and undoped ZnO NWs. - Highlights: •Effect of Co doping on the mechanical properties of ZnO nanowires is studied. •Co substitutes Zn atoms in ZnO crystal lattice. •Co addition affects crystal lattice parameters. •Co addition results in significantly decreased Young's modulus of ZnO. •Bending strength for doped and undoped wires is close to the theoretical strength.

36 MATERIALS SCIENCE↗

Multilayered vacuum-arc nanocomposite TiN/ZrN coatings before and after annealing: Structure, properties, first-principles calculations

Highlights: • Multilayer TiN/ZrN films were deposited using sequential vacuum-arc deposition of Ti and Zr targets in nitrogen atmosphere; • Several samples were annealed in air at the temperature 700 °C; • First-principles calculations of TiN(111), ZrN(111) structures and TiN(111)/ZrN(111) multilayer were carried out; • All deposited samples were highly polycrystalline with quite large 20–25 nm crystals; • The nanohardness and elastic modulus of non-annealed coatings reached 42 GPa and 348 GPa, respectively; • Deposited coatings demonstrate good wear and oxidation resistance; - Abstract: Nanoscale multilayered TiN/ZrN films were deposited using sequential vacuum-arc deposition of Ti and Zr targets in a nitrogen atmosphere. Studies of film's properties were carried out using various modern methods of analysis, such as XRD, STEM, HRTEM, SIMS combined with results of nanoindentation and tribological tests. To interpret the mechanical properties of the deposited multilayer films first-principles calculations of TiN(111), ZrN(111) structures and TiN(111)/ZrN(111) multilayer were carried out. To study the influence of thermal annealing, several samples were annealed in air at the temperature 700 °C. All deposited samples were highly polycrystalline with quite large 20–25 nm crystals. The crystalline planes were very ordinated and demonstrated an excellent coordinated growth. The nanohardness and elastic modulus of non-annealed coatings reached 42 GPa and 348 GPa, respectively. Annealing in air at the temperature 700 °C led to partial oxidation of the multilayered coatings, however hardness of the non-oxidized part of the coatings remained as high, as for initial coatings. All deposited coatings demonstrate good wear resistance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and fracture properties of open-cell porous Ti-6Al-4V with high porosity fabricated by electron beam melting

Highlights: • The Ti-6Al-4V foams with 80% high porosity are prepared by electron beam melting. • The ligament width appears to play the major role for mechanical properties. • The work of fracture is a linear function of ligament width and roughness/width ratio. - Abstract: The open-cell porous Ti-6Al-4V structure with high porosity, intended to be applied as replacement for human cancellous bone, were fabricated by electron beam melting (EBM). Computer aided design (CAD) was applied to design porous structures using the same unit cell with different unit cell sizes from 2.5 to 4 mm, different ligament widths from 600 to 900 μm, and different pore sizes from 1200 to 1800 μm, in order to achieve high porosity of 80% in avoiding the stress shielding effect. In comparison with the CAD designs and the EBM samples, there were minor discrepancies in terms of pore size and ligament width, mainly a result of melting pool. The measured data on the Young's modulus and yield strength of the EBM porous samples can be predicted by the Gibson and Ashby model. All samples with high porosity were found to match well with cancellous bone, with Young's modulus of 2 GPa and yield stress of 31 MPa, effective to diminish the risk of stress shielding effect. For porous EBM sample with high 80% porosity, the work of fracture can increase from 15.9 to 47.6 kJ/m{sup 2} with increasing ligament width from 600 to 900 μm.

36 MATERIALS SCIENCE↗

Development of pore-free Ti-Al-C MAX/Al-Si MMC composite materials manufactured by squeeze casting infiltration

Highlights: • Open-porous MAX phase preforms were synthesized by Microwave Assisted Self-propagating High-temperature Synthesis • Manufactured preforms were infiltrated by Al-Si alloy with the use of Squeeze Casting method to create pore-free composites • Obtained materials were characterized by the means of SEM, TEM and XRD analyses • Mechanical properties were tested and discussed in relation to the microstructures An innovative method of manufacturing of Ti-Al-C MAX/Al-Si MMC composite materials was developed using squeeze casting infiltration of open-porous MAX phase preforms. Self-propagating High-temperature Synthesis (SHS) in microwave-assisted mode was applied for the creation of preforms in the Ti-Al-C system, that were subsequently infiltrated with Al-Si alloy to create dense composite materials. Microstructure and phase composition, structural defects and potential impacts between constituents of manufactured composites were characterized by the means of SEM and TEM microscopies and XRD analysis. No undesired reaction at the interface was observed, but TiC inclusions were identified in the material. Among the mechanical properties, the instrumental Young's modulus and Vickers hardness were established. The hardness and the elastic modulus of the matrix were enhanced 4 to 5 times. Wear behaviour was tested with a “pin-on-flat” method with the reciprocating motion for different load values (0.1, 0.2 and 0.5 MPa) for tool steel counterpart. Wear resistance of the composite material (WR = 1.6–2.3 × 10{sup −4} mm{sup 3}/Nm) was twofold higher than for the sole matrix (WR = 3.5–4.8 × 10{sup −4} mm{sup 3}/Nm). The developed manufacturing method allows the effective fabrication of pore-free MAX phase based MMC composite materials, with significantly higher wear resistance than the widely applied Al-Si alloys.

36 MATERIALS SCIENCE↗

A theoretical study of solid solution strengthening in the refractory medium entropy alloy Nb 45 Ta 25 Ti 15 Hf 15

The refractory medium-entropy alloy (RMEA) Nb 45 Ta 25 Ti 15 Hf 15 exhibits exceptional tensile ductility and fracture toughness at ambient temperature, but its engineering applications are limited by a lack of high temperature strength. Using a machine-learning interatomic potential (MLIP) with near-density functional theory (DFT) accuracy, we conducted molecular dynamics (MD) and statics simulations of the behavior of dislocations with both screw and edge characters. We also analyze experimentally measured yield strengths using the Rao-Suzuki model and the Maresca-Curtin model modified to include a temperature-dependent shear modulus and a bulk modulus-dependent misfit volume, thereby uncovering the mechanisms underlying the yielding of this RMEA. Compared with the published experimental yield strength, the models parameterized by the MLIP effectively reproduce the experimental results over a wide temperature range. The models and MD simulations indicate that yielding is governed by screw dislocations, with dipole dragging as the dominant mechanism. In MD simulations, we observed a potential softening mechanism not considered by the Rao-Suzuki screw model: slow migration of interstitial jogs along the dislocation core, which could lead to the annihilation of vacancy and interstitial jog pairs by their combination.

BCC complex concentrated alloys↗

Powder X-ray diffraction, infrared and conductivity studies of AgSbMP{sub 3}O{sub 12} (M = Al, Ga, Fe and Cr)

New Nasicon type of compounds of composition AgSbMP{sub 3}O{sub 12} (M = Al, Ga, Fe and Cr) are synthesized by solid-state method. All the compounds crystallize in the hexagonal lattice with space group R3-barc. The infrared spectra of these compounds show characteristic bands due to PO{sub 4} group. The frequency independent conductivity of these compounds shows Arrhenius type behavior and the activation energy for conduction is in the range 0.40-0.55 eV. Frequency independent conductivity ({sigma}{sub dc}) studies and frequency dependent ({sigma}{sub ac}) impedance measurements correlate well. The Cole-Cole plots do not show any spikes on the lower frequency side indicating negligible electrode effects. The activation energies obtained from the plots of log {sigma}{sub dc}T versus 1/T, log {sigma}{sub ac}(0) versus 1/T and log {tau} versus 1/T are approximately the same. The peak width at half height for electric modulus (M'') plot is {approx}1.24 decades for all samples, which is close to 1.14 decades observed for Debye solid. The height of electric modulus (M'') obtained from the experimental plots are close to that of M'' (max) = C{sub 0}/2C indicating the Debye nature of the samples.

36 MATERIALS SCIENCE↗

Pressure and doping dependent elastic and thermodynamical properties of Ga{sub 1-x}In{sub x}P mixed valent compounds

Using a phenomenological lattice model incorporating the long-range Coulomb and charge transfer caused by the deformation of the electron shells of the overlapping ions and the Hafemeister and Flygare type short-range overlap repulsion extended upto the second neighbor ions and the van der Waals (vdW) interaction, we present a comprehensive study to understand the effects of pressure on the elastic behavior as ductility (brittleness) and thermodynamical properties of Ga{sub 1-x}In{sub x}P. Estimated phase-transition pressure and the vast volume discontinuity in pressure-volume phase diagram confirm the structural phase transition from zinc blende (B3) to rock salt (B1) phase. From the elastic constants the Poisson's ratio {nu}, the ratio R{sub S/B} of S (Voigt averaged shear modulus) over B (bulk modulus), elastic wave velocity, average wave velocity and thermodynamical property Debye temperature is calculated. The Poisson's ratio {nu} and the ratio R{sub S/B} allows one to conclude that Ga{sub 1-x}In{sub x}P is brittle in zinc blende (B3) and ductile nature is inferred in sodium chloride (B1) phase. To our knowledge this is the first quantitative theoretical prediction of the doping and pressure dependent elastic properties for mixed valent Ga{sub 1-x}In{sub x}P compounds and still awaits experimental confirmations.

36 MATERIALS SCIENCE↗

Pressure induced silver ion displacement in La{sub 3}Ag{sub 0.82}SnS{sub 7}

Highlights: Black-Right-Pointing-Pointer The silver ion shifts with increasing pressure in the direction of the central-point of sulphur trigonal antiprism. Black-Right-Pointing-Pointer Coordination number changes from CN = 3 to CN = 6 at {approx}3 GPa. Black-Right-Pointing-Pointer Zero-pressure bulk modulus is B{sub 0} = 61.74 GPa and the pressure derivative is B{sup Prime }{sub 0}=4.02. Black-Right-Pointing-Pointer No phase transition up to 4.5 GPa was detected. -- Abstract: The compounds with the general formula Ln{sub 3}MTX{sub 7} (space group P6{sub 3}) (Ln - rare-earth element, M - monovalent element (Cu, Ag), T - Si, Ge, Sn and X - S, Se) are interesting owing to the possible application in the field of ionic conductivity. In the crystal structure the face-sharing [Ag(S){sub 6}] triangular antiprisms form the channels where the Ag{sup +} ion can migrate along the crystallographic c axis. High-pressure X-ray diffraction shows that Ag{sup +} ion moves towards the central-point of [Ag(S){sub 6}] when pressure is risen. As a consequence, the coordination number of Ag{sup +} changes from CN = 3 to CN = 6 at {approx}3 GPa. The La{sub 3}Ag{sub 0.82}SnS{sub 7} has stiff structure; zero-pressure bulk modulus is B{sub 0} = 61.74 GPa and the pressure derivative is B{sup Prime }{sub 0}=4.02.

36 MATERIALS SCIENCE↗

Electrical conductivity studies of Bi{sub 2}O{sub 3}-Li{sub 2}O-ZnO-B{sub 2}O{sub 3} glasses

Highlights: Black-Right-Pointing-Pointer Ac conductivity measurements and its analysis has been performed on Bi{sub 2}O{sub 3}-Li{sub 2}O-ZnO-B{sub 2}O{sub 3} glasses in the temperature range 30-300 Degree-Sign C and a frequency range of 100 Hz to 1 MHz. Black-Right-Pointing-Pointer The dc conductivity increased and the activation energy decreased with lithium content. Black-Right-Pointing-Pointer The frequency dependent conductivity has been analyzed employing conductivity and modulus formalisms. Black-Right-Pointing-Pointer The onset of conductivity relaxation shifts towards higher frequencies with temperature. Black-Right-Pointing-Pointer The Almond-West conductivity formalism is used to explain the scaling behavior, and the relaxation mechanism is independent of temperature. -- Abstract: Ac conductivity measurements and its analysis has been performed on xBi{sub 2}O{sub 3}-(65-x)Li{sub 2}O-20ZnO-15B{sub 2}O{sub 3} (0 {<=} x {<=} 20) glasses in the temperature range 30-300 Degree-Sign C and a frequency range of 100 Hz to 1 MHz. The dc conductivity increased and the activation energy decreased with lithium content. The frequency dependent conductivity has been analyzed employing conductivity and modulus formalisms. The onset of conductivity relaxation shifts towards higher frequencies with temperature. The Almond-West conductivity formalism is used to explain the scaling behavior, and the relaxation mechanism is independent of temperature.

36 MATERIALS SCIENCE↗

Investigation of structural, optical, electrical and dielectric properties of catalytic sprayed hausmannite thin film

Hausmannite Mn{sub 3}O{sub 4} thin film have been synthesized using spray pyrolysis method. These films are characterized using X-ray diffraction (XRD), atomic force microscope AFM, UV–vis–NIR spectroscopy and impedance spectroscopy. XRD study confirms the tetragonal structure of the as-deposited films with lattice parameters, a = 5.1822 Å and c = 9.4563 Å and a grain size of about 56 nm. UV–vis–NIR spectroscopy was further used to estimate optical constants such as extinction coefficient, refractive index, band gap and Urbach energy. Moreover, impedance spectroscopy analysis was employed to estimate electrical and dielectrical properties of the sprayed thin films. The activation energy values deduced from DC conductivity and relaxation frequency were almost the same, revealing that the transport phenomena is thermally activated by hopping between localized states. The AC conductivity is found to be proportional to ω{sup s}. The temperature dependence of the AC conductivity and the frequency exponent, s was reasonably well interpreted in terms of the correlated barrier-hopping CBH model. The dielectric properties were sensitive to temperature and frequency. The study of the electrical modulus indicated that the charge carrier was localized. Experimental results concerning optical constants as Urbach energy, dielectric constant, electric modulus and AC and DC conductivity were discussed in terms of the hopping model as suggested by Elliott.

36 MATERIALS SCIENCE↗

Zirconium dioxide nanofilled poly(vinylidene fluoride-hexafluoropropylene) complexed with lithium trifluoromethanesulfonate as composite polymer electrolyte for electrochromic devices

Highlights: • Successful synthesis of electrolyte by blending PVdF-HFP, ZrO{sub 2} and LiCF{sub 3}SO{sub 3}. • ZrO{sub 2} increased electrolyte conductivity by two orders of magnitude. • ZrO{sub 2} doubled bulk mechanical strength of electrolyte in terms of Young’s modulus. • Electrolytes gave a optimum optical transmittance of 52.6%. - Abstract: Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) polymer electrolyte containing zirconium dioxide nanocrystals (ZrO{sub 2}-NC) and lithium trifluoromethanesulfonate (LiCF{sub 3}SO{sub 3}) has been synthesized using the conventional solution casting method. The addition of ZrO2-NC into the polymeric substrate gave remarkable properties in terms of the electrolyte’s ionic conductivity as well as its bulk mechanical strength. The enhanced amorphicity of the polymeric substrate due to ZrO{sub 2} and the nanofiller’s high dielectric constant make an excellent combination to increase the ionic conductivity (above 10{sup −4} S cm{sup −1}). Increasing the nanofiller content raises the ionic conductivity of the electrolyte by two orders of magnitude of which the optimum is 2.65 × 10{sup −4} S cm{sup −1} at 13.04 wt% ZrO{sub 2}-NC loading. Also, the Young’s modulus, an indicator of electrolyte’s mechanical stability, dramatically increased to 207 MPa upon loading 13.04 wt% ZrO{sub 2}-NC. Using UV–vis spectroscopy, the electrolytes with 13.04% ZrO{sub 2}-NC scanned from 200–800 nm wavelengths exhibited a maximum optical transmittance of 52.6% at 10 μm film thickness. The enhanced conductivity, high mechanical strength and reasonable optical transmittance shown by our composite polymer electrolyte make an excellent electrolyte for future energy saving smart windows such as electrochromic devices.

36 MATERIALS SCIENCE↗

Synergistic role of carbonaceous reinforcements on multi length scale tribology of electrophoretically deposited nickel-boron nitride coatings

Highlights: • Electrophoretic deposition of Ni-BN coating. • Reinforcement of Ni-BN with carbon allotropes (diamond, carbon nanotubes and graphene). • Enhanced hardness and elastic modulus in Ni-BN-D than Ni-BN-CNT and Ni-BN-Gr. • High wear resistance (0.45 × 10{sup −8} m{sup 3}) from fretting and micro-scratch testing of Ni-BN-D. • High compressive stress (−601 MPa) exist in Ni-BN-D coating which restricts wear. - Abstract: Electrophoretically deposited Ni-BN composite coating was strengthened with graphene (Ni-BN-Gr), carbon nanotubes (Ni-BN-CNT) and diamond (Ni-BN-D) carbonaceous reinforcements. Highest hardness (2.0 GPa) and elastic modulus (133.5 GPa) of Ni-BN-D coating than Ni-BN-CNT (1.96 GPa and 102.1 GPa, respectively), Ni-BN-Gr (1.94 GPa and 92.0 GPa respectively) and also from Ni-BN (1.89 GPa and 91.5 GPa, respectively) coatings was linked through high compressive stress (−601 MPa), dislocation density (8.9 × 10{sup 15} m{sup −2}) and yield strength (4.4 GPa). The micro-scratching damage was contributed by ploughing and adhesion components, which were compared with that of experimental frictional values. Addition of graphene, CNT and diamond in Ni-BN composite showed a decrease in wear volume (from 1.66 × 10{sup −8} m{sup 3} to 0.45 × 10{sup −8} m{sup 3}) due to the synergetic lubricating effect of BN and carbonaceous reinforcements. Thus, Ni-BN-D restrict inception of multiscale wear and can be a potential three phase metal-ceramic coating for engineering and industrial applications.

36 MATERIALS SCIENCE↗

One-pot fabrication and characterization of graphene/PMMA composite flexible films

Highlights: • Investigated the fabrication and characterization of conducting flexible films based on graphene/PMMA polymer composite. • Graphene/PMMA flexible films were fabricated by one-pot alternate stirring sonication (OPASS) process. • Electrical response of the fabricated flexible films were studied and exhibited an electrical conductivity of 44.92 S/m and 0.10 S/m with 50 wt% and 10 wt% concentrations, respectively. • Reinforcing polymers with graphite platelets will amend their surface toughness, modulus and barrier properties, suitable for commercial applications. - Abstract: The present work investigates fabrication and characterization of graphene/ poly (methyl methacrylate) (PMMA) composite flexible films. Graphene/PMMA flexible films were fabricated by one-pot alternate stirring sonication (OPASS) process. The method relies on the alternate high speed stirring and ultrasonication of graphite and its blending with PMMA without any sufactant assistance. A comparative study of the nanocomposite solution was carried out with the composite solution prepared by conventional (CL) method. The transformation of micro-sized graphite particles to nano-sized layers of graphite or few layer graphene was characterized by various analytical techniques. The electrical response of the fabricated flexible films were studied and exhibited an electrical conductivity of 44.92 S/m and 0.10 S/m with 50 wt% and 10 wt% concentrations, respectively. Thus, the fabricated flexible films could have excellent surface toughness, modulus and barrier properties, which make them a suitable candidate for commercial flexible electronic and wearable sensor applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of Erbium doping on the electrical behaviour of CaCu3Ti4O12 ceramics probed by impedance spectroscopy analysis

Highlights: • Influence of Er doping on the electrical behaviour of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics was reported. • Powder XRD analysis reveals that addition of Er did not affect the crystallinity. • High dielectric constant (ε{sub r} = 26,749) was found for Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics. • Nyquist plot suggest the negative temperature coefficient of resistance behaviour. - Abstract: Herein, the preparation and impedance spectroscopic investigation of pure and Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics is reported. FTIR spectroscopy and powder XRD analysis elucidate the surface functionality and crystalline nature of the products respectively. Scanning Electron Microscopy images substantiate the homogenous formation of nanoparticles and the EDS analysis confirms the elemental composition of the products. A relatively high dielectric constant (ε{sub r} = 26,749) is found for Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics than that of pure CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics (ε{sub r} = 5885) at 10 Hz (at 800 K). Nyquist plot of pure and Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics indicates the presence of a non-Debye type of relaxation phenomenon, which is further validated from the electrical modulus analysis. The variation of temperature dependent relaxation time of pure and Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics is estimated from both the imaginary part of impedance and electrical modulus analysis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tip radius variation with elastic indentation depth

The reduced elastic modulus of a material is measured with a nanoindenter probe that is operated in the tapping mode. The resonant frequency of a freely oscillating cantilever is reduced when contact is made between the indenter tip and surface under investigation. It’s shown using elasticity theory that the elastic deformation is a function of the indenter tip radius. A deeper penetration within the elastic range can change the tip radius, and introduce an error of 10% in calculating the reduced elastic modulus.

36 MATERIALS SCIENCE↗

One-pot ternary sequential reactions for photopatterned gradient multimaterials

Seamless multimaterial construction is a common motif in animal physiology. Such continuous mechanical gradients remain challenging to reproduce in engineered systems, as current resin chemistries typically result in a single fixed set of properties. As an alternative to single-property materials, we introduce a thiol-ene-epoxy-based photothermal reaction scheme that produces multimaterials by altering the polymer microstructure within a single resin. In this system, the photodosage during the first stage of processing dictates the extent of conversion for each subsequent reaction. As a result, our photochemistry can exhibit a diverse range of soft (Young’s modulus, E ~ 400 kPa; elongation, dL/L0 ~ 300%) and stiff (E ~ 1.6 GPa; dL/L 0 ~ 3%) mechanical properties. Furthermore, we pattern photostable and mechanically robust modulus gradients (d[E r, stiff /E r , soft] /dx > 1,000 mm -1 ) that exceed those found in squid beaks and human knee entheses. We demonstrate the ability to build intricate multimaterial architectures including a soft, wearable braille display.

36 MATERIALS SCIENCE↗