Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nonlinear problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Modeling approaches for addressing unrelaxable bound constraints with unconstrained optimization methods

We explore novel approaches for solving nonlinear optimization problems with unrelaxable bound constraints, which must be satisfied before the objective function can be evaluated. Our method reformulates the unrelaxable bound-constrained problem as an unconstrained optimization problem that is amenable to existing unconstrained optimization methods. The reformulation relies on a domain warping to form a merit function; the choice of the warping determines the level of exactness with which the unconstrained problem can be used to find solutions to the bound-constrained problem, as well as key properties of the unconstrained formulation such as smoothness. We develop theory when the domain warping is a multioutput sigmoidal warping, and we explore the practical elements of applying unconstrained optimization methods to the formulation. Here, we develop an algorithm that exploits the structure of the sigmoidal warping to guarantee that unconstrained optimization algorithms applied to the merit function will find a stationary point to the desired tolerance.

97 MATHEMATICS AND COMPUTING↗

Mathematical Analysis of the Solidification Behavior of Plain Steel Based on Solute- and Heat-Transfer Equations in the Liquid–Solid Zone

An analytical approximate solution to non-linear solute- and heat-transfer equations in the unsteady-state mushy zone of Fe-C plain steel has been obtained, assuming a linear relationship between the solid fraction and the temperature of the mushy zone. The heat transfer equations for both the solid and liquid zone along with the boundary conditions have been linked with the equations to solve the whole equations. The model predictions (e.g., the solidification constants and the effective partition ratio) agree with the generally accepted values and with a separately performed numerical analysis. The solidus temperature predicted by the model is in the intermediate range of the reported formulas. The model and Neuman’s solution are consistent in the low carbon range. A conventional numerical heat analysis (i.e., an equivalent specific heat method using the solidus temperature predicted by the model) is consistent with the model predictions for Fe-C plain steels. The model presented herein simplifies the computations to solve the solute- and heat-transfer simultaneous equations while searching for a solidus temperature as a part of the solution. Thus, this model can reduce the complexity of analyses considering the heat- and solute-transfer phenomena in the mushy zone.

36 MATERIALS SCIENCE↗

Fault Detection and Diagnosis In Hall–Héroult Cells Based on Individual Anode Current Measurements Using Dynamic Kernel PCA

Individual anode current signals in aluminum reduction cells provide localized cell conditions in the vicinity of each anode, which contain more information than the conventionally measured cell voltage and line current. One common use of this measurement is to identify process faults that can cause significant changes in the anode current signals. While this method is simple and direct, it ignores the interactions between anode currents and other important process variables. This paper presents an approach that applies multivariate statistical analysis techniques to individual anode currents and other process operating data, for the detection and diagnosis of local process abnormalities in aluminum reduction cells. Specifically, since the Hall–Héroult process is time-varying with its process variables dynamically and nonlinearly correlated, dynamic kernel principal component analysis with moving windows is used. The cell is discretized into a number of subsystems, with each subsystem representing one anode and cell conditions in its vicinity. The fault associated with each subsystem is identified based on multivariate statistical control charts. The results show that the proposed approach is able to not only effectively pinpoint the problematic areas in the cell, but also assess the effect of the fault on different parts of the cell.

36 MATERIALS SCIENCE↗

Three-Dimensional Flow Behavior Inside the Submerged Entry Nozzle

According to various authors, the surface quality of steel depends on the dynamic conditions that occur within the continuous casting mold’s upper region. The meniscus, found in that upper region, is where the solidification process begins. The liquid steel is distributed into the mold through a submerged entry nozzle (SEN). In this paper, the dynamic behavior inside the SEN is analyzed by means of physical experiments and numerical simulations. The particle imaging velocimetry technique was used to obtain the vector field in different planes and three-dimensional flow patterns inside the SEN volume. Moreover, large eddy simulation was performed, and the turbulence model results were used to understand the nonlinear flow pattern inside the SEN. Using scaled physical and numerical models, quasi-periodic behavior was observed due to the interaction of two three-dimensional vortices that move inside the SEN lower region located between the exit ports of the nozzle.

36 MATERIALS SCIENCE↗

The Binary Alkali Nitrate and Chloride Phase Diagrams: NaNO{sub 3}-KNO{sub 3}, LiNO{sub 3}-NaNO{sub 3}, LiNO{sub 3}-KNO{sub 3}, and NaCl-KCl

LiNO{sub 3}-NaNO{sub 3}, LiNO{sub 3}-KNO{sub 3,} NaNO{sub 3}-KNO{sub 3}, and NaCl-KCl phase relations were formulated using the regular solution model to obtain desired compositions for their potential application as a heat transfer fluid. The simultaneous nonlinear equations formed were solved numerically using a contour plot technique in Matlab. An algorithm was developed to determine the real roots of the coupled nonlinear equations and subsequent phase diagrams were constructed. The phase diagrams were compared with those predicted using FactSage thermochemical package and literature data from experimental studies. The calculated NaNO{sub 3}-KNO{sub 3} phase diagram shows that this system has a eutectic point at 0.5 mole fraction of KNO{sub 3} with a eutectic temperature of 220.85 °C, while the LiNO{sub 3}-KNO{sub 3} system was found to have a eutectic point at 0.44 mole fraction LiNO{sub 3} at 137 °C. The LiNO{sub 3}-NaNO{sub 3} system shows a eutectic at 0.524 mole fraction LiNO{sub 3} at 192.8 °C, and finally the NaCl-KCl system has a eutectic point at 0.48 mole fraction NaCl at 634 °C. The liquidus and solidus curves obtained fitted close against values obtained from the quasi-chemical model used in FactSage and experimental values from the literature. This study showed that the regular solution model combined with the contour plots approach can sufficiently describe the liquidus–solidus curves of the alkali binary nitrate and chloride systems and could be a useful method for predicting the phase diagrams for higher order alkali nitrates and chlorides.

36 MATERIALS SCIENCE↗

A Phase-Field Lattice-Boltzmann Study on Dendritic Growth of Al-Cu Alloy Under Convection

Effects of convection (forced and natural) on dendritic evolution of the Al-Cu alloy were investigated using a phase-field lattice-Boltzmann approach. The non-linear coupled equations were solved by applying a parallel and adaptive mesh refinement algorithm. Important physical aspects including dendritic fragmentation, splitting, and formation of solute plumes were simulated. Results showed that the dendritic growth patterns under convection exhibited remarkable difference from those without convection. The presence of flow led to variation of solute diffusion and upstream–downstream dendritic growth difference, which further influenced the development of dendritic arms and multi-dendritic competitive growth. When the convection intensity was magnified, the convection-induced anisotropy became dominated, and the growth patterns changed accordingly to accommodate the local thermodynamic variation.

36 MATERIALS SCIENCE↗

Mathematical Modelling of Gas–Liquid, Two-Phase Flows in a Ladle Shroud

Differential and macroscopic models of argon–steel flows in ladle shroud have been developed. In this, argon–steel, two-phase flow phenomena have been formulated via a transient, three dimensional, turbulent flow model, based on the volume of fluid (VOF) calculation procedure. While realizable k–ε turbulence model has been applied to map turbulence, commercial, CFD software ANSYS-Fluent™ (Version 18), has been applied to carry out numerical calculations. Predictions from the model have been directly assessed against experimental measurements across the range of shroud dimensions and volumetric flow rates typically practiced in the industry. It is demonstrated that the two-phase turbulent flow model captures the general features of gas–liquid flows in ladle shroud providing estimates of free jet length and threshold gas flow rates (required to halt air ingression) which are in agreement with corresponding experimental measurements. In the absence of differential solutions, a macroscopic model has been worked out through dimensional analysis embodying multiple non-linear regression. It is shown that dimensionless free jet length in bloom and slab casting shrouds can be estimated reasonably accurately from the following correlation (in SI unit), viz., ((L{sub jet})/(D{sub CN}))=2.8×10{sup −2}(((Q{sub G})/(Q{sub L}))){sup 1.14}(((gD{sub CN}{sup 5})/(Q{sub L}{sup 2}))){sup 0.8}(((σD{sub CN}{sup 3})/(ρ{sub L}Q{sub L}{sup 2}))){sup −0.9}(((D{sub sh})/(D{sub CN}))){sup 2.0}(((ρ{sub G})/(ρ{sub L}))){sup −0.30}in which, L{sub jet} is the free liquid jet length (m), Q{sub G} is the gas flow rate (m{sup 3}/s), Q{sub L} is the liquid flow rate (m{sup 3}/s), D{sub sh} is shroud diameter (m), D{sub CN} is the collector nozzle diameter (m), σ is the interfacial tension (N/m), and ρ{sub G} as well as ρ{sub L} are respectively density of gas and liquid (kg/m{sup 3}). It is demonstrated that the proposed correlation is consistent with the laws of physical modeling and leads to estimates that are in good agreement with predictions from the differential models, for both air-water as well as argon–steel systems. Numerical simulations as well as macroscopic modeling have indicated that thermo-physical properties of the gas–liquid system are important and exert some influences on the gas–liquid, two-phase, flow in ladle shrouds, albeit not to a large extent. Despite dissimilar thermo-physical properties, full scale water modeling appears to be sufficiently predictive and provides reasonable macroscopic descriptions of the two-phase flow phenomena in industrial ladle shroud systems.

42 ENGINEERING↗

A Finite-Element Approach for the Partitioning of Carbon in Q&P Steel

This paper reports a Galerkin finite-element analysis of carbon partitioning from martensite into austenite during the quenching and partitioning (Q&P) processes in steels. In contrast to classical or sophisticated diffusion field models, an alternative nonlinear governing equation based on chemical potential and composition is considered. The model is applied to simulate the carbon partitioning of modified 22MnB5 alloys assuming an immobile austenite–martensite phase boundary and, in turn, is compared with experimental measurements of the volume fraction and carbon content of retained austenite. The simulations show outstanding results on the influence of Si and C content on the partitioning parameters.

36 MATERIALS SCIENCE↗

Identification of Rate, Extent, and Mechanisms of Hot Metal Resulfurization with CaO-SiO{sub 2}-Na{sub 2}O Slag Systems

The resulfurization of hot metal has not been comprehensively studied in literature. This study presents an experimental and mathematical modeling study of resulfurization in thermodynamic and kinetic point of view. The rate, extent, and mechanisms of resulfurization were evaluated by analyzing concurrently the physical properties and sulfur-extracting ability of the slag. Experiments were conducted in a chamber furnace in an argon atmosphere, and the hot metal was sampled with pre-defined basis. The experiments were continued until the metal–slag system reached an apparent thermodynamic equilibrium. To obtain a quantitative measure on the effect of system properties on the rate and extent of resulfurization, the results of this study were combined with previous studies handling the sulfide capacities of Na{sub 2}O-SiO{sub 2} and CaO-SiO{sub 2}-Na{sub 2}O slag systems. The sulfide capacities of the slag and corresponding metal–slag sulfur partition ratios were mathematically modeled with data-driven techniques such as multiple linear and non-linear regression and artificial neural networks. Finally, with the help of these, to study the kinetics of resulfurization, a simple mechanistic reaction model was derived. The results suggest that resulfurization of hot metal follows 1st-order kinetics and that the rate and extent can be regulated through the control of the associated thermodynamic driving force and by modifying the physical properties of the slag. The rate-limiting factor was found to be determined by the morphology of the slag phase.

36 MATERIALS SCIENCE↗

Determination of Thermoelastic Properties of Carbon Nanotube/Epoxy Composites Using Finite Element Method

In the present study, three-dimensional finite element (FE) analysis has been performed for determination of thermoelastic properties of carbon nanotube (CNT)/epoxy composites considering both linear and nonlinear stress–strain relations of CNT. A square representative volume element has been considered for the FE analysis (FEA), and the effect of considering nonlinear stress–strain relation of CNT on the prediction of thermoelastic properties has been determined by comparing the results with the theoretical results. Results show that in order to obtain realistic values of thermoelastic properties, the nonlinear stress–strain relation of CNT needs to be used in the FEA. Not considering nonlinear stress–strain relation of CNTs in the FEA may lead to estimating erroneous values of thermoelastic properties of CNT composites which may have adverse effect in the design of structural components made of such composites subjected to thermomechanical loading.

36 MATERIALS SCIENCE↗

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

A new multiaxial fatigue life prediction model has been proposed in this paper. The concepts of nonlinear continuum damage mechanics and critical plane criteria were incorporated in the proposed model. The shear strain-based damage control parameter was chosen to account for multiaxial fatigue damage under constant amplitude loading. Fatigue tests were conducted on nickel-based superalloy GH4169 tubular specimens at the temperature of 400 °C under proportional and nonproportional loading. The proposed method was checked against the multiaxial fatigue test data of GH4169. Most of prediction results are within a factor of two scatter band of the test results.

36 MATERIALS SCIENCE↗

Evaluation of Plastic “Eta” Factor for Welds of SS316L(N) with High Strength Mismatch Ratio

Fracture testing standards of ASTM and ISO recommend expressions for plastic η factor of various fracture test specimen geometries to evaluate the fracture behavior of materials. These are intended for homogenous specimens, but according to ISO 15653, it can be extended for weldments up to a strength mismatch ratio (M) of 1.25. In practice, M > 1.25 is encountered in many applications. In the present study, η factor has been evaluated for welded compact tension specimens using a limit load-based approach. The η factors obtained using this approach for homogenous specimens with elastic–perfectly plastic material model are found to be within ± 4% of those from the ASTM E 1820-17a, thereby validating the procedure. For welds, the limit load is obtained from nonlinear (elastic–plastic) FE simulations. η factors for specimens with various crack lengths (a), weld width (h) and strength mismatch have been evaluated and found to be significantly influenced by these parameters. For M > 1.25, the estimated η values were found to be ~ 16% lower compared to that from the ASTM E 1820-17a. Thus, the use of the η values from the proposed method provides a conservative estimate of J–R curve for the welds. Further, it has been observed that depending on the slope of the blunting line, the J{sub Ic} value may vary significantly with the estimated η values.

36 MATERIALS SCIENCE↗

Study of the Effects of Materials Selection for the Closeout Structure on the Service Life of a Liquid Rocket Engine Thrust Chamber

The external structure of rocket engines thrust chambers for aerospace applications should be designed in order to provide adequate stiffness to the thrust chamber; however, it affects in a significant way the engine service life since it acts as a structural bound for the internal structure which is subjected to very high temperature values. The adoption of thin closeout structures allows to have lighter structures and to significantly increase the service life of the thrust chamber. The aim of the present work is to perform numerical investigations on the influence of the closeout geometry and materials on the number of cycles to failure of the thrust chamber. Furthermore, a study on the impact of creep phenomenon on the service life is illustrated. In particular, the present paper is focused on the thermomechanical study of the closeout structure, in terms of material choice, thickness, joining process with the inner liner, etc. Transient thermal and static structural nonlinear analyses are conducted by means of a commercial finite element code (ANSYS), in order to evaluate the number of cycles to failure for the investigated configurations. Viscoplastic models are adopted in order to simulate the highly nonlinear and rate-dependent phenomena occurring in the inner liner structure.

36 MATERIALS SCIENCE↗

Nonlinear Creep Deformation of Polycarbonate at High Stress Level: Experimental Investigation and Finite Element Modeling

It is well known that polycarbonate (PC) undergoes time-dependent deformation (i.e., creep deformation), and nonlinear creep deformation is often experienced at high stress level. Using the time–temperature–stress superposition principle (TTSSP), we obtain a new master curve, which covers higher stress level, and successfully establish a new modeling method of creep deformation of PC. First, to investigate the effect of applied stress level on the creep compliance (i.e., stress-dependent nonlinear creep deformation), this study conducted various creep tests with eight different stress levels. We found that the creep compliance curve strongly depended on the applied stress level; in particular, a higher stress level induced a larger difference in creep compliance. According to the TTSSP, the creep compliance curve at each stress level shifts with the creep time (i.e., stress reduced time). When we appropriately selected the stress reduced time, we obtained the master curve of creep compliance, which is unified with respect to various applied stresses. However, we found that the stress-shifted factor is not compliant with the previous TTSSP, especially in the higher stress regime. Therefore, this regime was also considered to obtain a new master curve that can cover a wide range of stress levels. Finally, our established creep model (master curve and stress shift factor) was introduced into FEM, and then this numerical model was verified by comparison with experimental data. Our model may be useful for predicting the creep deformation of PC subjected to a wide range of applied stresses.

36 MATERIALS SCIENCE↗

Hot Deformation Characteristics and Processing Map of FV520B Martensitic Precipitation-Hardened Stainless Steel

Hot deformation characteristics of FV520B martensitic precipitation-hardened stainless steel were investigated in the temperature range of 850-1150 °C and strain rate range of 0.005-0.5 s{sup −1} with true strain 0.8 by using Gleeble-3500 thermo-mechanical simulator. Critical stress and corresponding critical strain for dynamic recrystallization initiation were calculated. The constitutive equation was developed by employing Arrhenius constitutive model to represent the nonlinear relationship of true stress and deformation parameters including temperature, strain rate and strain. The correlation coefficient and average absolute relative error are 0.9979 and 2.225%, which indicates the good predictive accuracy of the established constitutive equations. Processing maps were constructed at different plastic strains levels based on dynamic material model (DMM) and established constitutive equation. Combining the processing map with microstructure, the optimum region for good workability is designated as the temperature range of 1050-1125 °C and strain rate range of 0.027-0.23 s{sup −1} with peak efficiency of 0.32. Homogeneous fine and equiaxed dynamic recrystallization (DRX) grains can be found in this optimum according to the microstructure metallographic pictures.

36 MATERIALS SCIENCE↗

Effect of Carbon Fiber Surface Modification on the Mechanical Properties of Carbon-Fiber-Reinforced Ultrahigh-Molecular-Weight Polyethylene Composite

In this paper, the surface properties and morphologies of the concentrated nitric acid (HNO{sub 3})-modified carbon fiber (CF) were characterized by XPS, SEM, and contact angle goniometer, respectively. The results showed that both the oxygen-containing functional groups content and the surface roughness of concentrated HNO{sub 3}-modified CF significantly increased. The contact angle of concentrated HNO{sub 3}-modified CF was obviously lower than that of unmodified CF. Studies on the mechanical properties of carbon-fiber-reinforced ultrahigh-molecular-weight polyethylene (CF/UHMWPE) composite revealed that the stress–strain behavior gradually changed from nonlinear to linear relationship with the rise of CF content in UHMWPE matrix. Both the tensile strength and modulus increased with the rise of CF content. Conversely, as the CF content in UHMWPE matrix is increasing, the flexural strength and modulus increased first and then decreased. The flexural strength and modulus of CF/UHMWPE composite with 30 wt.% CF content reached the maximum value of 157.61 MPa and 9.82 GPa, respectively. Moreover, the CF surface modification and CF content have a synergistic effect on the tensile and flexural mechanical properties of the CF/UHMWPE composite. The influence of CF modification on the tensile and flexural mechanical properties of the composite became more and more obvious with the rise of CF content.

36 MATERIALS SCIENCE↗

Mesoscale Numerical Characterization of Kevlar and Carbon–Kevlar Hybrid Plain-Woven Fabric Compression Behavior

A mesoscale finite element model (FEM) of the plain-woven fabric representative elementary volume (REV/unit cell) is developed. The developed FEM is used to predict the nonlinear compaction behavior of monolithic and intraply hybrid fabric made of high-strength carbon and Kevlar fibers. For geometrical modeling of the fabric REV, TexGen, an open-source geometrical modeling software (developed at Nottingham University), is utilized, and for mechanical characterization, FE simulation tool Abaqus{sup ®} is used. Geometrical nonlinearity of the fabric, including periodic boundary conditions and yarn interactions, is incorporated in the REV FE model. Material nonlinearity caused by transversely isotropic behavior of fibrous yarns is implemented through the user material subroutine form in FE simulation along with local orientation assigned to each yarn in the REV. Material properties of fibers are extracted from the literature and supplier data. The compression behavior of monolithic Kevlar and hybrid carbon–Kevlar (carbon warp and Kevlar weft yarns, C–K) fabric is predicted using the proposed FE model. FEM-predicted results were found to have good agreement with the experimentally obtained ones. Results depict that C–K hybrid fabrics have improved compression strength. Hybridization effect is governed by yarns mutual interaction, yarn area at crossovers, and transverse in-plane properties of the interyarn hybridized fabric. The proposed FE model can be used to predict the mechanical behavior of woven fabrics with different weaving patterns, unit cell geometry, material properties, and loading conditions.

36 MATERIALS SCIENCE↗

Mechanical Behavior of Lead at High Strain Rates

This paper presents a study on the material behaviors and constitutive models of lead at high strain rates. Quasi-static compressive tests and split Hopkinson pressure bar (SHPB) tests were conducted at room temperature. The results of the SHPB tests were verified by high-speed photography, and the error of strain is less than 3% at high strain rate (5000/s). Our results show that the yield stress and flow stress increase at high strain rates. This result indicates that lead is sensitive to the strain rate at high strain rates, but the dependence is not linear during 3000-5000/s. The strain-rate dependence of lead was fitted by a quadratic polynomial curve. To describe the nonlinear strain-rate relationship of lead, modified Johnson–Cook and Cowper–Symonds material models were used to fit the experimental stress–strain curves. The modified Cowper–Symonds model agrees better with the experimental results and can better describe the dynamic mechanical behavior of lead under high strain rates.

36 MATERIALS SCIENCE↗