Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

A 2D simulation study of Langmuir, whistler, and cyclotron maser instabilities induced by an electron ring-beam distribution

We carried out a series of 2D simulations to study the beam instability and cyclotron maser instability (CMI) with the initial condition that a population of tenuous energetic electrons with a ring-beam distribution is present in a magnetized background plasma. In this paper, weakly relativistic cases are discussed with the ring-beam kinetic energy ranging from 25 to 100 keV. The beam component leads to the two-stream or beam instability at an earlier stage, and the beam mode is coupled with Langmuir or whistler mode, leading to excitation of beam-Langmuir or beam-whistler waves. When the beam velocity is large with a strong beam instability, the initial ring-beam distribution is diffused in the parallel direction rapidly. The diffused distribution may still support CMI to amplify the X1 mode (the fundamental X mode). On the contrary, when the beam velocity is small and the beam instability is weak, CMI can amplify the Z1 (the fundamental Z mode) effectively while the O1 (the fundamental O mode) and X2 (the second harmonic X mode) modes are very weak and the X1 mode is not excited. In this report, different cases with various parameters are presented and discussed for a comprehensive understanding of ring-beam instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visualization techniques for the gyrokinetic tokamak simulation code

Gyrokinetic simulations of plasma microturbulence in tokamaks are challenging to visualize because the compute grid follows the magnetic field lines that spiral around the torus. We have overcome this challenge by developing three new approaches that improve visualization of gyrokinetics. Our techniques work directly with the topology of magnetic flux surfaces where the simulation stores variables in concentric rings on poloidal planes (vertical cross sections of the torus). Our visualization preview step triangulates each consecutive pair of rings to display the data on a poloidal plane. The second visualization technique follows spiral field lines around the torus and constructs polygons to visualize a flux surface. Third, the poloidal triangles are connected between planes to form prisms that compose a 3-D model of the entire torus. The visualization workflow produces detailed geometry that matches the high resolution, irregular compute grid for every time step. The surface and solid models are displayed in scientific visualization programs to effectively explore and communicate the results, including fluctuation of electron density, ion temperature, and electrostatic potential. Highly detailed renderings verify plasma behavior along magnetic field lines over time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

One-dimensional particle-in-cell simulations of electrostatic Bernstein waves in plasmas with kappa velocity distributions

Electrostatic Bernstein waves that propagate exactly perpendicularly to a static magnetic field in an electron-ion plasma are investigated using one-and-two-halves dimensional particle-in-cell simulations. An ion-to-electron mass ratio of m{sub i}/m{sub e} = 100 is used, allowing sufficient separation of the electron and ion time scales while still accounting for the ion dynamics without resorting to exceptionally long simulation run times. As a consequence of the mass ratio used, both the high frequency electron Bernstein wave and the lower frequency ion Bernstein wave are resolved within a single simulation run. The simulations presented here use isotropic three-dimensional kappa velocity distributions as well as the widely used Maxwellian velocity distribution, and the results from using each of these velocity distributions are analysed and compared. The behaviour of the Bernstein waves is found to be significantly dependent on the spectral index, κ, of the kappa distribution in all frequency domains of the Bernstein waves. In both the Maxwellian and kappa cases, spectral analysis of the electric field (wave) intensities, as a function of ω and k, show very good agreement between the simulation results and the linear dispersion relation for Bernstein waves. This agreement serves to validate the simulation techniques used, as well as the theory of Bernstein waves in plasmas with a kappa velocity distribution. The intensity of the field fluctuations in the simulations containing an abundance of superthermal particles, i.e., where the plasma has a kappa velocity distribution with a low kappa index, is slightly higher compared to the simulations of plasmas with higher kappa values. The plasmas with low kappa values also exhibit a broader region in frequency space of high intensity field fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of turbulence-driven plasma flow and origin of experimental empirical scalings of intrinsic rotation

Toroidal plasma flow driven by turbulent torque associated with nonlinear residual stress generation is shown to recover the observed key features of intrinsic rotation in experiments. In particular, the turbulence-driven intrinsic rotation scales close to linearly with plasma gradients and the inverse of the plasma current, qualitatively reproducing empirical scalings obtained from a large experimental data base. The effect of magnetic shear on the symmetry breaking in the parallel wavenumber spectrum is identified. The basis of the current scaling is found to be the enhanced k ∥ symmetry breaking induced by increased radial variation of the safety factor as the current decreases. The physics origin for the linear dependence of intrinsic rotation on the pressure gradient comes from the fact that both turbulence intensity and the zonal flow shear, which are two key ingredients for driving the residual stress, are increased with the strength of the turbulence drives, which are $R/L_{T_{e}}$ and $R/L_{n_{e}}$ for the collisionless trapped electron mode (CTEM). Highlighted results also include robust radial pinches in toroidal flow, heat and particle transport driven by CTEM turbulence, which emerge “in phase,” and are shown to play important roles in determining plasma profiles. Moreover discussed are the experimental tests proposed to validate findings from these gyrokinetic simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of controlled spectral emission of Al plasmas generated by temporally tailored laser irradiation

Hydrodynamics simulations and irradiation experiments were performed to correlate ul-trashort intensity envelopes of the laser fields and thermodynamical states reached by the emerging plasma phase in ablation regimes. We discuss the efficiency of energy coupling as a function of different intensity envelopes and the resulting temperature, density and ionization states since the energy delivery rate is an essential factor that predetermines the material thermodynamic evolution. Subsequently, we examine the plasma composition in calculating the proportion of neutral/ion species typical of LIBS signals and comparing it with neutral/ion ratios given by experimental results. Moreover, the calculations allow to investigate the efficiency of nanoparticles generation from materials subjected to different heating rates. These can be related to hydrodynamic ejection of nanosized liquid layers upon the action of mechanic waves. With support from numerical simulations of the hydrodynamic advance of the excited matter, experiments revealed that mastering intensity envelopes of ultrashort laser pulse leads to further control on the ablation products. Emerging plasma phase in a hot state generates specific spectral emission patterns that can serve as indicators for its controlled formation and kinetic evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The scaling of forced collisionless reconnection

This paper presents two-fluid simulations of forced magnetic reconnection with finite electron inertia in a collisionless three-dimensional (3D) cube with periodic boundaries in all three directions. Comparisons are made to analogous two-dimensional (2D) simulations. Reconnection in this system is driven by a spatially localized forcing function that is added to the ion momentum equation inside the computational domain. Consistent with previous results in similar, but larger forced 2D simulations [B. Sullivan, B. N. Rogers, and M. A. Shay, Phys. Plasmas 12, 122312 (2005)], for sufficiently strong forcing the reconnection process is found to become Alfvenic in both 2D and 3D, i.e., the inflow velocity scales roughly like some fraction of the Alfven speed based on the upstream reconnecting magnetic field, and the system takes on a stable configuration with a dissipation region aspect ratio on the order of 0.15.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Technique for analysis of interparticle interaction in nonideal dissipative systems with isotropic pair potentials

A new technique for determining interaction forces between the particles in nonideal dissipative systems with isotropic pair potentials is presented. This technique is based on solving of the inverse problem describing movement of dust particles by a system of Langevin equations. Numerical simulations in a wide range of the parameters typical for dusty plasma experiments were performed to verify the solutions of inverse problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of discharging dust grains by laser excitation of neutral atoms

We have simulated a method for changing the charge on dust grains in plasmas by exciting a small fraction of the neutral atoms into highly excited states. The atoms can be preferentially excited near a dust grain and quickly ionized by the hot electrons in the plasma. Because the neutral atom has low speed when it is excited, the resulting positive ion strikes the dust with nearly unit efficiency and the electron is repelled into the plasma. The rate for this process can be controlled by varying the state excited and/or the density of excited atoms. Thus, this mechanism gives a controllable method for varying the dust charge without substantially changing the other plasma properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction of high contrast laser pulse with foam-attached target

Interactions of high contrast laser pulses with foam-attached targets are investigated via particle-in-cell simulations in order to enhance the energy coupling from laser to plasmas. A foam layer whose mass density is much lower than that of the solid state is used for controlling the plasma density distribution of the laser irradiation region with the aid of the high contrast laser pulses, which are by contrast with the expanding profile of preformed plasmas which are inevitably generated by the irradiation of the low contrast laser pulses. The ionization process plays a role in the laser and foam interaction, which results in the formation of periodic structure of ion charge density. The bulk electrons inside the foam layer are heated by the laser pulse, which results in the generation of abundant MeV electrons and higher energy coupling from laser to plasma. These features are utilized for laser ion acceleration by using a foam-attached thin foil target. It is shown that the laser accelerated ion energy is enhanced by properly choosing the foam parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of laser-produced Sn microplasma for a high-brightness extreme ultraviolet light source

The effect of laser focal spot diameters of 26 and 150 {mu}m on 13.5 nm extreme ultraviolet (EUV) radiation is investigated. Simulations show that the smaller spot size has a shorter electron plasma density scale length and deeper and denser laser energy deposition region. This results in additional time required for plasma expansion and radiation transport to efficiently emit EUV light. This is experimentally observed as an increase in the delay between the EUV emission and the laser pulse. The shorter scale length plasma reabsorbs less EUV light, resulting in a higher conversion efficiency, smaller and slightly brighter light source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Finite Volume schemes on unstructured grids for non-local models: Application to the simulation of heat transport in plasmas

In the so-called Spitzer-Haerm regime, equations of plasma physics reduce to a nonlinear parabolic equation for the electronic temperature. Coming back to the derivation of this limiting equation through hydrodynamic regime arguments, one is led to construct a hierarchy of models where the heat fluxes are defined through a non-local relation which can be reinterpreted as well by introducing coupled diffusion equations. We address the question of designing numerical methods to simulate these equations. The basic requirement for the scheme is to be asymptotically consistent with the Spitzer-Haerm regime. Furthermore, the constraints of physically realistic simulations make the use of unstructured meshes unavoidable. We develop a Finite Volume scheme, based on Vertex-Based discretization, which reaches these objectives. We discuss on numerical grounds the efficiency of the method, and the ability of the generalized models in capturing relevant phenomena missed by the asymptotic problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implementation and verification of a model linearized multi-species collision operator in the COGENT code

We implement the multi-species linearized model collision operator, based on the approach proposed by Kolesnikov, in the full-f continuum gyrokinetic code COGENT. We describe the operator and use it in several COGENT simulations of highly collisional plasmas. We analyze simulation results with the Braginskii fluid model to illustrate that COGENT recovers both friction and thermal forces. Finally, we simulate the neoclassical transport of heavy impurities with COGENT and illustrate agreement with previously published theoretical results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Limits of validity of photon-in-cell simulation techniques

A comparison is made between two reduced models for studying laser propagation in underdense plasma; namely, photon kinetic theory and the slowly varying envelope approximation. Photon kinetic theory is a wave-kinetic description of the electromagnetic field where the motion of quasiparticles in photon coordinate-wave number phase space is described by the ray-tracing equations. Numerically, the photon kinetic theory is implemented with standard particle-in-cell techniques, which results in a so-called photon-in-cell code. For all the examples presented in this paper, the slowly varying envelope approximation is accurate and therefore discrepancies indicate the failure of photon kinetic approximation for these cases. Possible remedies for this failure are discussed at the end of the paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding extraction limits of plasma cathodes with experiment and simulation

The project is focused on computations for enhanced ionization near the exit orifice of a plasma cathode and how the cathode extraction electrode geometry and stray magnetic field structure influence available extractable current. The computational effort will take place at the Princeton Collaborative Research Laboratory (PCRF). The specific modeling platform to be utilized from PCRF is the electrostatic direct implicit particle in cell (EDIPIC) code. EDIPIC will be used to study ionization processes in the electron extraction region of the cathode. The control of electron energy is a key aspect to minimizing power losses in the plasma. Exiting electrons ionize gas leaving the orifice and in the process produce the dense plasma from which large amounts of current can be extracted. Project activities include studying processes that determine the energy distribution of the exiting electrons thus providing insight into how to optimize the source. The model will be validated and developed using experimental measurements as warranted. The familiarity and expertise of the team at PPPL with this type of plasma and the challenges posed greatly enhances the likelihood of gaining insight into the extraction sheath under the duration of the proposed activity. The effort is expected to shed a great deal of insight into electron extraction processes and pathways for optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigations on loop antenna excited whistler waves in a cylindrical plasma based on laboratory experiments and simulations

Experimental investigations and simulations of loop antenna excited whistler waves in a cylindrical low temperature plasma are presented. Experiments are performed in the VINETA [Franck et al., Plasma Sources Sci. Technol. 14, 226 (2005)] device and simulations are generated using IPF-FD3D [C. Lechte, IEEE Trans. Plasma Sci. 37, 1099 (2009)], an implementation of the Yee-algorithm. A good agreement of the experiment and the simulation is found. The simulation is used to predict the spatial structure of the wave, the dominant source of the electric field, the relative contribution of electron, and displacement current as well as parallel and perpendicular currents to the magnetic field of the wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluation of models for numerical simulation of the non-neutral region of sheath plasma

Four different electron models are used to simulate the nonequilibrium plasma flow around a representative cylindrical Faraday probe geometry. Each model is implemented in a two-dimensional axisymmetric hybrid electron fluid and particle in cell method. The geometric shadowing model is derived from kinetic theory on the basis that physical obstruction of part of the velocity distribution leads to many of the expected sheath features. The Boltzmann electron fluid model relates the electron density to the plasma potential through the Boltzmann relation. The non-neutral detailed electron fluid model is derived from the electron conservation equations under the assumption of neutrality, and then modified to include non-neutral effects through the electrostatic Poisson equation. The Poisson-consistent detailed electron fluid model is also derived from the conservation equations and the electrostatic Poisson equation, but uses an alternative method that is inherently non-neutral from the outset. Simulations using the geometric shadowing and non-neutral detailed models do not yield satisfactory sheath structures, indicating that these models are not appropriate for sheath simulations. Simulations using the Boltzmann and Poisson-consistent models produce sheath structures that are in excellent agreement with the planar Bohm sheath solution near the centerline of the probe. The computational time requirement for the Poisson-consistent model is much higher than for the Boltzmann model and becomes prohibitive for larger domains.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Boundary conditions for plasma fluid models at the magnetic presheath entrance

The proper boundary conditions at the magnetic presheath entrance for plasma fluid turbulence models based on the drift approximation are derived, focusing on a weakly collisional plasma sheath with T{sub i} Much-Less-Than T{sub e} and a magnetic field oblique to a totally absorbing wall. First, the location of the magnetic presheath entrance is rigorously derived. Then boundary conditions at the magnetic presheath entrance are analytically deduced for v{sub ||i}, v{sub ||e}, n, {phi}, T{sub e}, and for the vorticity {omega}={nabla}{sub Up-Tack }{sup 2}{phi}. The effects of E Multiplication-Sign B and diamagnetic drifts on the boundary conditions are also investigated. Kinetic simulations are performed that confirm the analytical results. Finally, the new set of boundary conditions is implemented in a three-dimensional global fluid code for the simulation of plasma turbulence and, as an example, the results of a tokamak scrape-off layer simulation are discussed. The framework presented can be generalized to obtain boundary conditions at the magnetic presheath entrance in more complex scenarios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tersoff Benchmarking of Be-C-H Interatomic Potential

To demonstrate prolonged fusion power in ITERs (International Thermonuclear Experimental Reactors), the selection of appropriate plasma facing materials (PFMs) is a vital issue that requires the use of interatomic potentials to simulate the plasma interactions with the PFMs. So it is no surprise that the use of computer codes such as LAMMPS to perform studies in order to determine proper PFMs is necessary based on the complexity of such studies. In recent Tokamak advancements, beryllium was chosen as a first wall material due to its low Z (lower energy loss due to plasma contamination), its low tritium inventory and its oxygen gettering quality. With its high melting point and ability to withstand high heat fluxes, beryllium makes a fine choice for a PFM. In this work, Be-C-H (beryllium-carbon-hydrogen) bonds were investigated in a LAMMPS Tersoff simulation, where the interatomic potentials for Be-C-H were converted to LAMMPS Tersoff format, and were validated by calculating the cohesive energy (E{sub coh}), lattice constant (a), and atomic volume (V{sub 0}) for comparison to Density Functional Theory (DFT), Analytical Bond-Order Potentials (ABOP) and experiment potentials. This benchmark serves as the validation of performing Be-C-H bombardment simulations using LAMMPS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗