Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

MODELLING FIBER ORIENTATION DURING ADDITIVE MANUFACTURING COMPRESSION MOLDING PROCESSES

The production of high-performance thermoplastic composites reinforced with short carbon fibers can be achieved by a novel “additive manufacturing-compression molding” technique. An advantage of such combination is two-fold: controlled fiber orientation in additive manufacturing and less void content by compression molding. In this study, a computational fluid dynamics model has been developed to predict the behavior of printed layers during fiber-reinforced thermoplastic extrusion and subsequent compression molding. The fiber orientation was modelled with a simple quadratic closure model. The interaction between the fibers is included using a rotary diffusion coefficient which becomes significant in concentrated regimes. Finally, the second order orientation tensor is coupled with the momentum equation as an anisotropic part of the stress term. The effect of processing parameters on the behavior of printed layers was investigated to determine the favorable printing scenarios. The developed numerical model enables design of high-performance composites with tunable mechanical properties.

Seta, Berin↗
DOE OSTI2022

MODELLING OF ADDITIVE MANUFACTURING – COMPRESSION MOLDING PROCESS USING COMPUTATIONAL FLUID DYNAMICS

A computational fluid dynamics model has been developed to predict the behavior of a printed strands during a novel material extrusion additive manufacturing and compression molding process. While the traditional additive manufacturing process enables control over the fiber orientation within the part, it would also result in high void content. On the other hand, compression molding produces parts with low porosity levels at rapid processing cycle time but lacks control over the microstructure. The novel additive manufacturing – compression molding (AM-CM) integrating both these processes offers control over both the microstructure and porosity to manufacturing high performance composite parts. The numerical model developed here enables to analyze the effect of processing parameters on the behaviour of printed layer that is subsequently compressed and to determine the optimal printing parameters for high-performance composite part design.

Seta, Berin↗
DOE OSTI2022

Identification of Critical Material Attributes in Lignin Streams Based on Pseudomonas putida Performance

Variability in chemical composition of corn stover feedstocks has been suggested to play a role in biocatalyst performance during the conversion of lignocellulosic biomass to value-added compounds. In previous studies, we investigated the performance of Pseudomonas putida CJ781 - an engineered bacterium that converts aromatic compounds to muconate - on various lignin streams produced from the deacetylation of corn stover, and we found significant differences on muconate production. To better understand the origin of these differences, we down selected twenty-two compounds from literature - that had previously been detected as extractives in lignin streams - and we analyzed their concentrations in 12 lignin streams generated from different feedstocks. P. putida CJ781 was then cultivated in mock lignin streams supplemented with various concentrations of these compounds. Bacterial growth was tracked in microtiter plates and the performance was measured by comparing maximum growth rates among conditions. At maximum concentrations that may be found in lignin streams, sodium was the material attribute that limited growth rate in a greater extent, with a reduction in growth rate by 8 to 37%, depending on the counter ion, with sodium nitrate being the most inhibitory, followed by sodium acetate, sodium chloride, and sodium sulfate. Ammonium acetate was also found to be inhibitory at average concentrations of ammonium in lignin streams, reducing maximum growth rate by 18%. Overall, the data from this study has allowed to down select critical material attributes in lignin streams and process parameters that significantly affect the performance of P. putida and will be used as input to predictive models that aim to reduce risks attributed to feedstock variability in lignocellulosic biorefineries.

biocatalyst↗
DOE OSTI2023

Multi-scale modeling of the electric field assisted sintering process

The electric field assisted sintering (EFAS) process involves tightly coupled physics that influence microstructural evolution in the particles being compacted. It is also an inherently multi-scale phenomenon, with the microstructure of the compact influencing the subsequent engineering-scale response of the sintering system. To improve understanding of how processing parameters influence microstructural evolution, we have developed a multi-scale modeling approach that couples a continuum-level model of the sintering system with a phase-field model for microstructural evolution of particles within the compact. The phase-field model couples the effect of chemical and electrical driving forces on microstructural evolution and includes the effect of charged defect segregation to surfaces and grain boundaries; this segregation leads to enhanced defect transport and heat generation at these interfaces in response to applied electric field. The effect of enhanced heat generation on particle neck growth and the influence of microstructural evolution on the engineering-scale model are demonstrated.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Continued Validation Studies using the MOOSE Framework for Plasma Simulation with Electromagnetics

Resources and tools for the modeling and simulation of low-temperature plasma (LTP) discharges are increasingly vital to progress in the field in order to properly characterize and study complex source designs and plasma chemistries beyond the scope of traditional diagnostics. Open-source software provides powerful platforms for this work and can enable community-driven LTP R&D. Within the Multiphysics Object-Oriented Simulation Environment (MOOSE) open-source framework [1], capabilities have been demonstrated in the areas of plasma fluids (Zapdos [2]), plasma chemistry (CRANE [3]), and general electromagnetic wave theory (Electromagnetic Library for Kinetics & fluids [ELK] [4]). ELK has since been coupled to Zapdos/CRANE to enable fully coupled electromagnetic plasma simulations. This talk will detail the continued validation efforts and discuss Zapdos-ELK-CRANE code coupling with various-low temperature plasma sources. The impact of fully coupled electromagnetics on process parameters (e.g., temperature and electron/ion energy) versus an electrostatic description will also be discussed. [1] Permann et al., SoftwareX, 11 (2020) 100430. [2] Lindsay et al., J. Phys. D: Appl. Phys. 49 (2016) 235204. [3] Keniley et al., Talk, GEC Session DT3.00002 (2019). [4] Icenhour et al., Talk, GEC Session RR1.00006 (2019). Acknowledgements: INL Graduate Fellowship Program, NSF SI2 Grant 1740300, U.S. Dept. of Energy Office of Science Graduate Student Research Program

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Failure Mode and Effects Analysis Summary Report

This report provides an overview of the development of failure modes and effects analysis (FMEA) and its implementation as a systematic criticality and risk assessment tool supporting a quality by design (QbD) approach for FCIC research. This report also provides a high-level overview of the results for the FMEA evaluation of two feedstock preprocessing system configurations: (1) generation of pine residue materials for high-temperature pyrolysis conversion and (2) generation of corn stover materials for low-temperature conversion using deacetylation and disc mechanical refining pretreatment for fermentation to hydrocarbons. For the results presented in this report, our FMEA interviews included two approaches. The first approach was to perform FMEA interviews for the entire system of unit operations giving a wholistic system level view. The second approach consisted of detailed interviews for each individual unit operation within the system allowing for a “deep dive” into the specific failures for the individual components within the configuration. These two approaches provide different resolutions of information. The FMEA results of this report were focused on failures associated with meeting critical quality attributes (CQAs) identified for the target conversion processes for each processed feedstock type. The information gathered through the FMEA interviews include estimations of risk scores for meeting each given CQA specification, identification of the impacts for not meeting a CQA specification, capturing causes associated with material attributes and process parameters for each failure, identification of current detection methods, and speculation of potential mitigation strategies for decreasing a failure’s risk score. The complete results of all FMEA interviews are provided in the Appendices of this report.

conversion↗
DOE OSTI2019

An Approach for Setting Priorities for Experimental Studies in Support of Safety Assessments - 19393

Many experiments have been conducted, in both academia and industry, to support the understanding of the disposal of radioactive waste. For the disposal of low-level radioactive waste (LLW) into radioactive waste repositories, it is important to develop an approach to tackle which datasets are able to directly underpin safety assessments, and what future research experiments could address the gaps in this understanding. In this paper, we present an approach to identify which future experiments should be considered to underpin safety assessments for disposals of LLW in a near-surface repository. The approach involves 6-steps: define the disposal problem (e.g. the disposal of LLW in engineered vaults); determine what key processes may affect the disposal of the waste; establish the assumptions underpinning the key processes; determine how sensitive the key process parameters are to variation; determine whether key data are available and assess the quality of that data with respect to the disposal problem; and determine attributes for experiments needed to supply missing key data. We show, in this paper, how this approach can be used to develop a better understanding of C-14 gas generation, under varying degrees of groundwater saturation, for the disposal of LLW into engineered vaults, in the near-surface. Furthermore, we have developed an approach that identifies the types of experiments and their attributes to aid researchers to help select appropriate types of experiments to underpin safety assessments. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Fast Reactor Materials R&D Update

Presentation detailing Major focus: Deployment of A709 for fast reactor structural applications in the area of Design, Fabrication, Supply Chain, and Adx Rx Operation. Also discuss additional work to support A709 development, High level timeline for Irradiation design data, and processing parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Modeling and Simulation of Advanced Manufacturing Techniques using MOOSE and MALAMUTE

Advanced manufacturing techniques offer increased geometry complexity, energy and material usage efficiency improvements, and an expanded palette of materials as compared to conventional manufacturing approaches. Advanced-manufacturing-produced parts can experience wide variations in the final microstructure, and these microstructure variations significantly impact the parts’ performance. In this chapter, we present recent code developments within Multiphysics Object-Oriented Simulation Environment (MOOSE) and in the MOOSE Application Library for Advanced Manufacturing UTilitiEs (MALAMUTE). Here we demonstrate applying these modeling and simulation codes to two advanced manufacturing process types: advanced sintering techniques and laser-based additive manufacturing techniques. The multiphysics and multiscale capabilities of these codes enable prediction of the microstructure evolution resulting from variations in the Advanced manufacturing process parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advanced Fuels Campaign Execution Plan

The Advanced Fuels Campaign (AFC) Execution Plan outlines the strategy, mission, scope, near-term and long-term goals, structure, and organization associated with nuclear fuels and materials research, development, and demonstration activities within the Department of Energy’s (DOE) Nuclear Fuel Cycle and Supply Chain (NFCSC) program. NFCSC has been given responsibility to identify and mature advanced fuel technologies for the DOE using a science-based approach, focused on developing a fundamental understanding of nuclear fuels and materials to drive development of integrated nuclear fuel and materials technology. This science-based approach combines theory, experiments, and multiscale modeling and simulation to achieve a predictive understanding of relevant behaviors ranging from fuel fabrication processes (and their resulting fuel microstructures) through fuel/cladding performance under irradiation (in contrast to more empirical, observation-based approaches frequently used in fuel performance modeling and fuel qualification). The traditional scope of AFC includes the evaluation and development of multiple fuel forms to support two fuel cycle options: once-through and full recycle. The word “fuel” is used generically to include conventional fuels, transmutation targets, and any associated cladding or duct materials. The once-through fuel cycle addresses advanced light water reactor fuels with enhanced performance, extended burnup, and reduced waste generation. In fiscal year (FY) 2012, AFC’s scope expanded to include research, development, and demonstration (RD&D) for light water reactor (LWR) fuels with enhanced accident tolerance. Fuel fabrication activities include the development of innovative methods to enhance process efficiencies, reduce waste, and improve control over as-fabricated fuel microstructural properties to achieve desired in-reactor performance. Using modern modeling and simulation approaches, the objective is to predict fresh fuel properties given the feedstock characteristics and fabrication process parameters. The performance-related activities include small-scale, in-reactor, and out-of-reactor phenomenological testing (distinct from, but synergistic with, integral prototypic testing) and extensive, quantitative characterization (focusing on characterization of fuel and cladding materials at the scale of microstructure) both before and after testing. Larger-scale, prototypic experiments are conducted in concert with phenomenological testing to drive a Fuel Development and Qualification program, incorporating a fundamental understanding of fuel behavior performance characteristics. Then, using the tools developed under the productive science-based approach, fuels will be optimized to meet specific performance requirements, thereby minimizing the need to repeatedly perform large-scale, integral experiments over a wide parametric range as a means of experimental exploration. Two significant initiatives are underway within AFC. First, a gap analysis completed in early FY 2019 identified critical irradiation testing needs that are lacking within the national light water reactor (LWR) fuels testbed since the shutdown of the Halden Reactor in 2018. The identified gaps are for instrumented, prototypic testing of LWR fuels, especially under boiling water reactor conditions, ramp conditions, and conditions leading to fuel failure; these needs exist for supporting current LWR fuels and their possible extension to higher burnups, but are especially urgent relative to near-term development and qualification of accident-tolerant fuels. Recommendations that resulted from the Halden Gap Analysis focused on enhancements at Advanced Test Reactor (ATR) and Transient Reactor Test Facility (TREAT) to fill gaps in testing capabilities relative to these needs. Second, a concerted effort to develop and demonstrate a systematic approach to accelerating the development, testing, and qualification of new fuel systems has been initiated. This is highlighted by a test strategy that combines the considerable advances in multiscale, mechanistic fuel modeling of recent years with a MiniFuel separate effects test program in the High Flux Isotope Reactor (HFIR) and a Fission Accelerated Steady-state Testing (FAST) semi-integral accelerated test program in ATR. This approach is being tested/demonstrated using the metallic fuel system, but if successful it is expected to be extensible to multiple fuel types and diverse applications. This document includes an overview of the NFCSC program, a definition of science-based development of nuclear fuels, near-term goals for Advanced LWR fuels (ALFs), and longer-term goals for Advanced Reactor Fuels (ARFs) RD&D. This includes the activities that will be conducted to achieve success toward the grand challenge, as well as the goals and milestones to be achieved over the next few decades of research and development. Long-term goals are based on the DOE Office of Nuclear Energ

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

An Organic, Direct Bonded Copper, Multi-Layered, Ultra-Low Inductance Package for High-Power UWBG MOSFETs

The most common metalized substrates used in high-power switching packages consist of a ceramic layer such as Aluminum Nitride (AlN) sandwiched between two copper layers. Ceramic substrates are used because it has the key characteristic of having high dielectric strength while being thermally conductive. A large drawback to ceramic substrates is that they do not allow for a multi-layered circuit design. By replacing the traditional ceramic substrate with organic direct bonded copper (ODBC) we can open a wide range of possibilities when it comes to power module layout such as multi-layered circuits and double-sided cooling. Both benefits are critical while packaging high-performance Gallium Oxide (Ga2O3) MOSFETs. Because of Ga2O3's relatively poor thermal conductivity, a double-sided cooled package becomes necessary. Therefore, the use of ODBC provides the flexibility to fabricate copper traces carrying much higher currents, and by creating a multi-layered package, we can drastically reduce the parasitic inductance inside the power module. Achieving lower parasitic inductance is critical for an ultra-fast Ga2O3 package to avoid excessive voltage overshoot and ringing. Using ODBC, we have designed novel packages capable of handling the challenges presented by fast Ga2O3 switching. Using multi-physics modeling software, we can validate our design before building the prototype. Due to the simple process parameters needed to work with ODBC, we can rapidly create prototypes without using external vendors. This flexibility allows us to quickly design, build, and validate highly complex switching power modules to accommodate next generation, Ga2O3 switching devices.

ADVANCED PROPULSION SYSTEMS,ENGINEERING↗
DOE OSTI2024

Invertible Temper Modeling using Normalizing Flows and the Effects of Structure Preserving Loss

Advanced manufacturing research and development is typically small-scale, owing to costly experiments associated with these novel processes. Deep learning techniques could help accelerate this development cycle but frequently struggle in small-data regimes like the advanced manufacturing space. While prior work has applied deep learning to modeling visually plausible advanced manufacturing microstructures, little work has been done on data-driven modeling of how microstructures are affected by heat treatment, or assessing the degree to which synthetic microstructures are able to support existing workflows. We propose to address this gap by using invertible neural networks (normalizing flows) to model the effects of heat treatment, e.g., tempering. The model is developed using scanning electron microscope imagery from samples produced using shear-assisted processing and extrusion (ShAPE) manufacturing. This approach not only produces visually and topologically plausible samples, but also captures information related to a sample’s material properties or experimental process parameters. We also demonstrate that topological data analysis, used in prior work to characterize microstructures, can also be used to stabilize model training, preserve structure, and improve downstream results. We assess directions for future work and identify our approach as an important step towards end-to-end deep learning system for accelerating advanced manufacturing research and development.

Howland, Sylvia↗
DOE OSTI2025

Powder Metallurgy – Hot Isostatic Pressing of 316H Stainless Steel for Nuclear Components

Overview of the PM-HIP work performed on stainless steel 316H as part of the microreactor program. High temperature mechanical testing was performed, with concerns identified with the creep-fatigue performance. Variations in feedstock and processing parameters did not conclusively identify the primary factor in the reduced creep-fatigue performance.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Advanced Computational Modeling of High-Level Waste Vitrification at the Hanford Site

The U.S. Department of Energy (DOE) has selected vitrification for stabilizing legacy tank waste at the Hanford site, where radioactive waste from plutonium production was historically stored in underground tanks. This waste will be separated into low-activity waste (LAW) and high-level waste (HLW) fractions and processed at the Waste Treatment and Immobilization Plant (WTP). At WTP, glass melters are used for the vitrification of radioactive tank waste, transforming it into a stable borosilicate glass form for safe long-term storage. The melter vessel is constructed from highly durable and heat-resistant materials, where the vitrification process occurs. The main regions that are modeled are the melt pool, plenum, cold cap, riser/discharge chamber, and surrounding structure with insulation layers. Forced convection induced by air bubblers at the base of the melter ensure uniform temperature distribution and provide heat to the cold cap layer. The cold cap is a region of reacting batch feed that floats on top of the molten glass and is where the batch-to-glass reactions occur. Joule heating provided by electrodes mounted along the vertical walls of the melter and immersed directly in the glass, generates the necessary heat for the net endothermic conversion processes that occur in the cold cap. The high temperatures, radioactivity, and opaque nature of the glass prevent direct observation inside the melters. Therefore, computational models are essential for providing insight into factors that affect melter throughput. Thermocouples in the plenum provide operators with plenum temperature measurements. Operational adjustments include bubbling rate, voltage supplied to the electrodes, feed adjustments, and glass removal rate. Different computational fluid dynamics (CFD) models have been developed, each serving a specific purpose. There are CFD models of different scale melters, as well as models that capture the two-phase flow interfaces of rising bubbles in the molten glass or models with a simplified molten glass region so that the surrounding structure and plenum can be feasibly incorporated. Pilot-scale melter models have been developed to serve as validation of the methods employed in the simulation of the full-scale WTP melters. Models incorporating resolved bubbling are used to develop momentum source terms to implement into a single phase, multi-region, steady-state flow model that is being validated by measured process parameters such as glass production rate, voltage, input power, plenum temperatures, etc. The resolved bubbling model uses the multiphase volume of fluid approach to model the system with a high-resolution interface capturing scheme to maintain sharp interfaces between the molten glass and the air phase. The suite of CFD models is continually being improved to incorporate more realistic physics and achieve faster turnaround time. For example, an incremental controller is implemented to automatically adjust electrode voltage within the simulation to a molten glass set point temperature of 1150°C. Newer models feature improved meshes to ensure conformal meshes between regions and eliminate unnecessary mesh refinement in areas that are not of interest (such as boundary layers in offgas ports). Instead of explicitly modeling the structural, refractory, and insulation layers of the melter, a thermal resistance approach is used with published correlations used for boundary conditions. The development of robust and efficient CFD models will be instrumental in enabling the WTP to successfully fulfill its mission of safely stabilizing legacy nuclear waste.

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗
DOE OSTI2023

Multi-scale modeling of the electric field assisted sintering process

The electric field assisted sintering (EFAS) process involves tightly coupled physics that influence microstructural evolution in the particles being compacted. It is also an inherently multi-scale phenomenon, with the microstructure of the compact influencing the subsequent engineering-scale response of the sintering system. To improve understanding of how processing parameters influence microstructural evolution, we have developed a multi-scale modeling approach that couples a continuum-level model of the sintering system with a phase-field model for microstructural evolution of particles within the compact. The phase-field model couples the effect of chemical and electrical driving forces on microstructural evolution and includes the effect of charged defect segregation to surfaces and grain boundaries; this segregation leads to enhanced defect transport and heat generation at these interfaces in response to applied electric field. The effect of enhanced heat generation on particle neck growth and the influence of microstructural evolution on the engineering-scale model are demonstrated.

36 - MATERIALS SCIENCE↗
DOE OSTI2026

Are the U.S. Biorefineries Over the Hurdle of 2000 Ton Daily Throughput Yet?

The efficient utilization of lignocellulosic biomass for biofuel and biochemical production is hindered by material handling issues such as clogging and segregation among other challenges. Preprocessing methods such as drying, screening, and milling have improved conversion yield but have not sufficiently enhanced flowability, especially herbaceous biomass. The poor flowability of herbaceous biomass is rooted in some particle attributes that remain less altered by those methods, e.g., irregular particle shape, high roughness, and high compressibility, making it hard to scale up throughput to a key benchmark for a biorefinery – 2000 ton per day. Applying additional preprocessing methods like pelletization and torrefaction to drastically change those particle attributes can improve flow and handling but has not been comprehensively verified through test. The flowability of herbaceous biomass feedstock formats generated by three different preprocessing methods was recently assessed at Idaho National Laboratory’s Biomass Feedstock National User Facility: first, loose particles size reduced from as-received materials; second, pellets produced from an efficient densification process; and third, powders milled from torrefied pellets. Benchmarking tests including static angle of repose, basic flow energy measured in a powder rheometer, and discharge flow in an adjustable hopper, were conducted to evaluate those feedstock formats. Beyond the capacity of existing experimental apparatuses, a digital engineering approach involving flow simulations and AI models were used to identity the material attributes and processing parameters that have dominant influences on flow throughput. Techno-economic analysis focusing on hopper flow as a typical material handling operation was conducted for those feedstock formats. Perspectives will be discussed on whether the 2000-ton daily throughput for a biorefinery is achievable at an acceptable cost by using any of the tested preprocessing methods.

09 - BIOMASS FUELS↗
NASA NTRS1980

Formulation and implementation of a practical algorithm for parameter estimation with process and measurement noise

A new formulation is proposed for the problem of parameter estimation of dynamic systems with both process and measurement noise. The formulation gives estimates that are maximum likelihood asymptotically in time. The means used to overcome the difficulties encountered by previous formulations are discussed. It is then shown how the proposed formulation can be efficiently implemented in a computer program. A computer program using the proposed formulation is available in a form suitable for routine application. Examples with simulated and real data are given to illustrate that the program works well.

Maine, R. E.↗
NASA NTRS1983

Formulation of a practical algorithm for parameter estimation with process and measurement noise

A new formulation is proposed for the problem of parameter estimation in dynamic systems with both process and measurement noise. The formulation applies to continuous-time state space system models with discrete-time measurements. Previous formulations of this problem encountered several theoretical and practical difficulties which are overcome by the new formulation. The most important element of the new formulation is a reparameterization of the unknown noise covariances. A computer program that implements the new formulation is available.

Maine, R. E.↗