Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOUND VELOCITY - MEASUEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Increased Jet Noise Due to a "Nominally Laminar" State of Nozzle Exit Boundary Layer

A set of 2-in. diameter nozzles is used to investigate the effect of varying exit boundary layer state on the radiated noise from high-subsonic jets. It is confirmed that nozzles involving turbulent boundary layers are the quietest while nozzles involving a "nominally laminar" boundary layer are loud especially on the high-frequency side of the sound pressure level spectrum. The latter boundary layer state involves a "Blasius-like" mean velocity profile but higher turbulence intensities compared to those in the turbulent state. The higher turbulence in the initial region of the jet shear layer leads to increased high-frequency noise. The results strongly suggest that an anomaly noted with subsonic jet noise databases in the literature is due to a similar effect of differences in the initial boundary layer state.

Zaman, K. B. M. Q.↗

Increased Jet Noise Due to a "Nominally Laminar" State of Nozzle Exit Boundary Layer

A set of 2-inch diameter nozzles is used to investigate the effect of varying exit boundary layer state on the radiated noise from high-subsonic jets. It is confirmed that nozzles involving turbulent boundary layers are the quietest while nozzles involving a nominally-laminar boundary layer are loud especially on the high-frequency side of the sound pressure level spectrum. The latter boundary layer state involves a Blasius-like mean velocity profile but higher turbulence intensities compared to those in the turbulent state. The higher turbulence in the initial region of the jet shear layer leads to increased high-frequency noise. The results strongly suggest that an anomaly noted with subsonic jet noise databases in the literature is due to a similar effect of differences in the initial boundary layer state.

Zaman, K. B. M. Q.↗

THREE-DIMENSIONAL NUMERICAL SIMULATIONS OF FAST-TO-ALFVEN CONVERSION IN SUNSPOTS

The conversion of fast waves to the Alfven mode in a realistic sunspot atmosphere is studied through three-dimensional numerical simulations. An upward propagating fast acoustic wave is excited in the high-{beta} region of the model. The new wave modes generated at the conversion layer are analyzed from the projections of the velocity and magnetic field in their characteristic directions, and the computation of their wave energy and fluxes. The analysis reveals that the maximum efficiency of the conversion to the slow mode is obtained for inclinations of 25 Degree-Sign and low azimuths, while the Alfven wave conversions peak at high inclinations and azimuths between 50 Degree-Sign and 120 Degree-Sign . Downward propagating Alfven waves appear at the regions of the sunspot where the orientation of the magnetic field is in the direction opposite to the wave propagation, since at these locations the Alfven wave couples better with the downgoing fast magnetic wave which is reflected due to the gradients of the Alfven speed. The simulations show that the Alfven energy at the chromosphere is comparable to the acoustic energy of the slow mode, being even higher at high inclined magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗

SOFIA-EXES Mid-IR Observations of [Fe II] Emission from the Extended Atmosphere of Betelgeuse

We present a NASA-DLR SOFIA-Echelon Cross Echelle Spectrograph (EXES) and NASA Infrared Telescope Facility-Texas Echelon Cross Echelle Spectrograph (TEXES) mid-IR R≃50,000 spectral study of forbidden Fe ii transitions in the early-type M supergiants, Betelgeuse (α Ori: M2 Iab) and Antares (α Sco: M1 Iab + B3 V). With EXES, we spectrally resolve the ground term [Fe ii] 25.99 μm (a{sup 6}D{sub J=7/2--9/2}: E{sub up}=540 K) emission from Betelgeuse. We find a small centroid blueshift of 1.9 ± 0.4 km s{sup −1} that is a significant fraction (20%) of the current epoch wind speed, with a FWHM of 14.3 ± 0.1 km s{sup −1}. The TEXES observations of [Fe ii] 17.94 μm (a{sup 4}F{sub J=7/2−9/2}: E{sub up}=3400 K) show a broader FWHM of 19.1 ± 0.2 km s{sup −1}, consistent with previous observations, and a small redshift of 1.6 ± 0.6 km s{sup −1} with respect to the adopted stellar center-of-mass velocity of V{sub CoM}=20.9±0.3 km s{sup −1}. To produce [Fe ii] 25.99 μm blueshifts of 20% wind speed requires that the emission arises closer to the star than existing thermal models for α Ori’s circumstellar envelope predict. This implies a more rapid wind cooling to below 500 K within 10R{sub ∗} (θ{sub ∗}=44 mas, dist = 200 pc) of the star, where the wind has also reached a significant fraction of the maximum wind speed. The line width is consistent with the turbulence in the outflow being close to the hydrogen sound speed. EXES observations of [Fe ii] 22.90 μm (a{sup 4}D{sub J=5/2--7/2}: E{sub up}=11,700 K) reveal no emission from either star. These findings confirm the dominance of cool plasma in the mixed region where hot chromospheric plasma emits copiously in the UV, and they also constrain the wind heating produced by the poorly understood mechanisms that drive stellar outflows from these low variability and weak-dust signature stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Heat release and flame structure measurements of self-excited acoustically-driven premixed methane flames

An open-open organ pipe burner (Rijke tube) with a bluff-body ring was used to create a self-excited, acoustically-driven, premixed methane-air conical flame, with equivalence ratios ranging from 0.85 to 1.05. The feed tube velocities corresponded to Re = 1780-4450. Coupled oscillations in pressure, velocity, and heat release from the flame are naturally encouraged at resonant frequencies in the Rijke tube combustor. This coupling creates sustainable self-excited oscillations in flame front area and shape. The period of the oscillations occur at the resonant frequency of the combustion chamber when the flame is placed {proportional_to}1/4 of the distance from the bottom of the tube. In this investigation, the shape of these acoustically-driven flames is measured by employing both OH planar laser-induced fluorescence (PLIF) and chemiluminescence imaging and the images are correlated to simultaneously measured pressure in the combustor. Past research on acoustically perturbed flames has focused on qualitative flame area and heat release relationships under imposed velocity perturbations at imposed frequencies. This study reports quantitative empirical fits with respect to pressure or phase angle in a self-generated pressure oscillation. The OH-PLIF images were single temporal shots and the chemiluminescence images were phase averaged on chip, such that 15 exposures were used to create one image. Thus, both measurements were time resolved during the flame oscillation. Phase-resolved area and heat release variations throughout the pressure oscillation were computed. A relation between flame area and the phase angle before the pressure maximum was derived for all flames in order to quantitatively show that the Rayleigh criterion was satisfied in the combustor. Qualitative trends in oscillating flame area were found with respect to feed tube flow rates. A logarithmic relation was found between the RMS pressure and both the normalized average area and heat release rate for all flames. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aeroacoustic computation of gust-blade interaction

To better understand and address the challenges faced in computing the acoustics of flow fields, test problems must be considered. In the present study, the sound radiated by the interaction of a flat plate with an oncoming gust containing a two component, mean velocity is computed. The gust has a uniform mean flow in x with Mach number M(infinity) equal to 0.5. The gust's mean velocity in y is of smaller amplitude and is given by: v = 0.1 sin(pi/8(x/M(sub infinity) - t)). This problem has been posed for an upcoming ICASE/LaRC workshop on benchmark problems in computational aeroacoustics. A plate with a length of 30 units in x is used. The plate is assumed to be infinitesimally thin and is centered at the origin. All variables are made dimensionless using the scales specified. Acoustic quantities are obtained by numerically integrating the linearized Euler equations. Integration is performed on the computational domain -100.0 less than or equal to x less than or equal to 100.0, -100.0 less than or equal to y less than or equal to 100.0, using unit length grid spacing in x and in y. An integration scheme is sought which will provide accurate solution to the small quantities of interest at a minimal computational expense. Results indicate that with the given discretization a scheme of minimal fourth order accuracy might be adequate to approximate the waves within the given flow. Thus, a variation of the MacCormack scheme with fourth order accuracy in space and second order accuracy in time was chosen. A scheme with sixth order accuracy in space has also been implemented and results compared with those of the fourth order accurate scheme. To ensure no mass flux, zero normal velocity is assigned at the plate. This condition will induce a discontinuity in the pressure across the plate location. Values for the perturbation pressure p' along the surface of the plate are obtained using a one-sided, third order Taylor expansion, such that p'(sub y) = O. In accordance with the Kutta condition, perturbation pressure at the trailing edge is assigned to zero. In the far field, radiation boundary conditions have been implemented. The effectiveness of the far field conditions are validated by computing in a larger computational domain and comparing the results. Early in time, sound waves begin to radiate from the plate. A Doppler effect is observed. After the initial transients disappear, the strongest waves leave the trailing edge at an approximate 45 degree angle. The intensity pattern of pressure fluctuations shows five lobes (of increasing magnitude with increasing downstream direction) emerging from the plate. Undesirable short wave contaminants are observed in the computed pressure distribution along the plate surface. For a more accurate solution at small scales, a more refined discretization will be required.

Martin, James E.↗

Effective field theory of non-attractor inflation

We present the model-independent studies of non attractor inflation in the context of effective field theory (EFT) of inflation. Within the EFT approach two independent branches of non-attractor inflation solutions are discovered in which a near scale-invariant curvature perturbation power spectrum is generated from the interplay between the variation of sound speed and the second slow roll parameter η. The first branch captures and extends the previously studied models of non-attractor inflation in which the curvature perturbation is not frozen on super-horizon scales and the single field non-Gaussianity consistency condition is violated. We present the general expression for the amplitude of local-type non-Gaussianity in this branch. The second branch is new in which the curvature perturbation is frozen on super-horizon scales and the single field non-Gaussianity consistency condition does hold in the squeezed limit. Depending on the model parameters, the shape of bispectrum in this branch changes from an equilateral configuration to a folded configuration while the amplitude of non-Gaussianity is less than unity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A new look at sound generation by blade/vortex interaction

As a preliminary attempt to understand the dynamics of blade/vortex interaction, the two-dimensional problem of a rectilinear vortex filament interacting with a Joukowski airfoil is analyzed in both the lifting and nonlifting cases. The vortex velocity components could be obtained analytically and integrated to determine the vortex trajectory. With this information, the aeroacoustic low-frequency Green's function approach could then be employed to calculate the sound produced during the encounter. The results indicate that the vortex path deviates considerably from simple convection due to the presence of the airfoil and that a reasonably sharp sound pulse is radiated during the interaction whose fundamental frequency is critically dependent upon whether the vortex passes above or below the airfoil. Determination of this gross parameter of the interaction is shown to be highly nonlinearly dependent upon airfoil circulation, vortex circulation, and initial position.

Hardin, J. C.↗

Predicting aerodynamic sound utilizing a two-point, two-time turbulence theory

The feasibility of determining two-point, two-time turbulent velocity correlations based on extending closure models for one-point, one-time turbulence correlations is demonstrated. The procedure used is based on a spatial moment integral formulation of the governing equations using approximate, parameterized trial functions for the two-point, two-time velocity correlations. Solution of the equations is shown to give a set of anisotropic length scales and the separation-time-dependent decorrelation of the ensemble averaged turbulent velocities. The analysis is simplified using the assumption of homogeneous stationary turbulence and a constant shear, unidirectional mean flow. It is shown that the anisotropic behavior of measured turbulence correlations can be characterized through this technique.

Hecht, A. M.↗

The Supersonic Axial-Flow Compressor

An investigation has been made to explore the possibilities of axial-flow compressors operating with supersonic velocities into the blade rows. Preliminary calculations showed that very high pressure ratios across a stage, together with somewhat increased mass flows, were apparently possible with compressors which decelerated air through the speed of sound in their blading. The first phase of the investigation was the development of efficient supersonic diffusers to decelerate air through the speed of sound. The present report is largely a general discussion of some of the essential aerodynamics of single-stage supersonic axial-flow compressors. As an approach to the study of supersonic compressors, three possible velocity diagrams are discussed briefly. Because of the encouraging results of this study, an experimental single-stage supersonic compressor has been constructed and tested in Freon-12. In this compressor, air decelerates through the speed of sound in the rotor blading and enters the stators at subsonic speeds. A pressure ratio of about 1.8 at an efficiency of about 80 percent has been obtained.

Kantrowitz, Arthur↗

On Combining Thermal-Infrared and Radio-Occultation Data of Saturn's Atmosphere

Radio-occultation and thermal-infrared measurements are complementary investigations for sounding planetary atmospheres. The vertical resolution afforded by radio occultations is typically approximately 1 km or better, whereas that from infrared sounding is often comparable to a scale height. On the other hand, an instrument like CIRS can easily generate global maps of temperature and composition, whereas occultation soundings are usually distributed more sparsely. The starting point for radio-occultation inversions is determining the residual Doppler-shifted frequency, that is the shift in frequency from what it would be in the absence of the atmosphere. Hence the positions and relative velocities of the spacecraft, target atmosphere, and DSN receiving station must be known to high accuracy. It is not surprising that the inversions can be susceptible to sources of systematic errors. Stratospheric temperature profiles on Titan retrieved from Cassini radio occultations were found to be very susceptible to errors in the reconstructed spacecraft velocities (approximately equal to 1 mm/s). Here the ability to adjust the spacecraft ephemeris so that the profiles matched those retrieved from CIRS limb sounding proved to be critical in mitigating this error. A similar procedure can be used for Saturn, although the sensitivity of its retrieved profiles to this type of error seems to be smaller. One issue that has appeared in inverting the Cassini occultations by Saturn is the uncertainty in its equatorial bulge, that is, the shape in its iso-density surfaces at low latitudes. Typically one approximates that surface as a geopotential surface by assuming a barotropic atmosphere. However, the recent controversy in the equatorial winds, i.e., whether they changed between the Voyager (1981) era and later (after 1996) epochs of Cassini and some Hubble observations, has made it difficult to know the exact shape of the surface, and it leads to uncertainties in the retrieved temperature profiles of one to a few kelvins. This propagates into errors in the retrieved helium abundance, which makes use of thermal-infrared spectra and synthetic spectra computed with retrieved radio-occultation temperature profiles. The highest abundances are retrieved with the faster Voyager-era winds, but even these abundances are somewhat smaller than those retrieved from the thermal-infrared data alone (albeit with larger formal errors). The helium abundance determination is most sensitive to temperatures in the upper troposphere. Further progress may include matching the radio-occultation profiles with those from CIRS limb sounding in the upper stratosphere.

Flasar, F. M.↗

ISEE-1 and -2 observations of laminar bow shocks - Velocity and thickness

The ISEE-1 and -2 spacecraft have provided the opportunity for studying the thickness and velocity of the bow shock on a regular basis. There are two models for the thickness of quasi-perpendicular laminar shocks. Galeev (1976) has calculated the thickness of the nearly perpendicular laminar bow shock by means of a weak ion sound turbulence (WIST) approach. Morse and Greenstadt (1976), on the other hand, assume that the shock thickness adjust itself to stay close to the drift velocity for marginal stability of current driven electrostatic waves. The present investigation is concerned with an evaluation of the competing theories, taking into account ISEE-1 and -2 observations of laminar bow shocks. It is found that the formula used by Morse and Greenstadt does not predict the observed thicknesses as well as the formula given by Galeev.

Russell, C. T.↗

ELECTRON ACCELERATION BY LANGMUIR WAVES PRODUCED BY A DECAY CASCADE

It was recently reported that a significant part of the Langmuir waveforms observed by the STEREO satellite during type III solar radio bursts are likely consistent with the occurrence of electrostatic decay instabilities, when a Langmuir wave L resonantly interacts with another Langmuir wave L{sup ′} and an ion sound wave S{sup ′} through the decay channel L→L{sup ′}+S{sup ′}. Usually such wave–wave interactions occur in regions of the solar wind where the presence of electron beams can drive Langmuir turbulence to levels allowing waves L to decay. Moreover, such solar wind plasmas can present long-wavelength, randomly fluctuating density inhomogeneities or monotonic density gradients which can significantly modify the development of such resonant instabilities. If some conditions are met, the waves can encounter a second decay cascade (SDC) according to L{sup ′}→L{sup ′′}+S{sup ′′}. Analytical estimates and observations based on numerical simulations show that the Langmuir waves L{sup ′′} produced by this SDC can accelerate beam particles up to velocities and kinetic energies exceeding two times the beam drift velocity v{sub b} and half the initial beam energy, respectively. Moreover, this process can be particularly efficient if the scattering effects of waves on the background plasma inhomogeneities have already accelerated a sufficient amount of beam electrons up to the velocity range where the phase velocities of the L{sup ′′} waves are lying. The paper shows that the conditions necessary for such process to occur can be easily met in solar wind plasmas if the beam velocities do not exceed around 35 times the plasma thermal velocity.

79 ASTRONOMY AND ASTROPHYSICS↗

On the importance of heavy fields during inflation

We study the dynamics of two-field models of inflation characterized by a hierarchy of masses between curvature and isocurvature modes. When the hierarchy is large, a low energy effective field theory (EFT) exists in which only curvature modes participate in the dynamics of perturbations. In this EFT heavy fields continue to have a significant role in the low energy dynamics, as their interaction with curvature modes reduces their speed of sound whenever the multi-field trajectory is subject to a sharp turn in target space. Here we analyze under which general conditions this EFT remains a reliable description for the linear evolution of curvature modes. We find that the main condition consists on demanding that the rate of change of the turn's angular velocity stays suppressed with respect to the masses of heavy modes. This adiabaticity condition allows the EFT to accurately describe a large variety of situations in which the multi-field trajectory is subject to sharp turns. To test this, we analyze several models with turns and show that, indeed, the power spectra obtained for both the original two-field theory and its single-field EFT are identical when the adiabaticity condition is satisfied. In particular, when turns are sharp and sudden, they are found to generate large features in the power spectrum, accurately reproduced by the EFT.

79 ASTRONOMY AND ASTROPHYSICS↗

A model for gravity-wave spectra observed by Doppler sounding systems

A model for Mesosphere - Stratosphere - Troposphere (MST) radar spectra is developed following the formalism presented by Pinkel (1981). Expressions for the one-dimensional spectra of radial velocity versus frequency and versus radial wave number are presented. Their dependence on the parameters of the gravity-wave spectrum and on the experimental parameters, radar zenith angle and averaging time are described and the conditions for critical tests of the gravity-wave hypothesis are discussed. The model spectra is compared with spectra observed in the Arctic summer mesosphere by the Poker Flat radar. This model applies to any monostatic Doppler sounding system, including MST radar, Doppler lidar and Doppler sonar in the atmosphere, and Doppler sonar in the ocean.

Vanzandt, T. E.↗

SPIRAL DENSITY WAVES IN M81. II. HYDRODYNAMIC SIMULATIONS OF THE GAS RESPONSE TO STELLAR SPIRAL DENSITY WAVES

The gas response to the underlying stellar spirals is explored for M81 using unmagnetized hydrodynamic simulations. Constrained within the uncertainty of observations, 18 simulations are carried out to study the effects of self-gravity and to cover the parameter space comprising three different sound speeds and three different arm strengths. The results are confronted with the data observed at wavelengths of 8 μm and 21 cm. In the outer disk, the ring-like structure observed in the 8 μm image is consistent with the response of cold neutral medium with an effective sound speed 7 km s{sup –1}. For the inner disk, the presence of spiral shocks can be understood as a result of 4:1 resonances associated with the warm neutral medium with an effective sound speed 19 km s{sup –1}. Simulations with a single effective sound speed alone cannot simultaneously explain the structures in the outer and inner disks. Instead this justifies the coexistence of cold and warm neutral media in M81. The anomalously high streaming motions observed in the northeast arm and the outward shifted turning points in the iso-velocity contours seen along the southwest arm are interpreted as signatures of interactions with companion galaxies. The level of simulated streaming motions narrows down the uncertainty of the observed arm strength toward larger amplitudes.

79 ASTRONOMY AND ASTROPHYSICS↗

Calculations of single crystal elastic constants for yttria partially stabilised zirconia from powder diffraction data

Yttria Stabilised Zirconia (YSZ) is a tough, phase-transforming ceramic that finds use in a wide range of commercial applications from dental prostheses to thermal barrier coatings. Micromechanical modelling of phase transformation can deliver reliable predictions in terms of the influence of temperature and stress. However, models must rely on the accurate knowledge of single crystal elastic stiffness constants. Some techniques for elastic stiffness determination are well-established. The most popular of these involve exploiting frequency shifts and phase velocities of acoustic waves. However, the application of these techniques to YSZ can be problematic due to the micro-twinning observed in larger crystals. Here, we propose an alternative approach based on selective elastic strain sampling (e.g., by diffraction) of grain ensembles sharing certain orientation, and the prediction of the same quantities by polycrystalline modelling, for example, the Reuss or Voigt average. The inverse problem arises consisting of adjusting the single crystal stiffness matrix to match the polycrystal predictions to observations. In the present model-matching study, we sought to determine the single crystal stiffness matrix of tetragonal YSZ using the results of time-of-flight neutron diffraction obtained from an in situ compression experiment and Finite Element modelling of the deformation of polycrystalline tetragonal YSZ. The best match between the model predictions and observations was obtained for the optimized stiffness values of C11 = 451, C33 = 302, C44 = 39, C66 = 82, C12 = 240, and C13 = 50 (units: GPa). Considering the significant amount of scatter in the published literature data, our result appears reasonably consistent.

36 MATERIALS SCIENCE↗

Bound on the speed of sound from holography

We show that the squared speed of sound v{sub s}{sup 2} is bounded from above at high temperatures by the conformal value of 1/3 in a class of strongly coupled four-dimensional field theories, given some mild technical assumptions. This class consists of field theories that have gravity duals sourced by a single-scalar field. There are no known examples to date of field theories with gravity duals for which v{sub s}{sup 2} exceeds 1/3 in energetically favored configurations. We conjecture that v{sub s}{sup 2}=1/3 represents an upper bound for a broad class of four-dimensional theories.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗