Search NASA⌕ Search

SEARCH · Search NASA

Results for “State estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Sensor placement algorithm development to maximize the efficiency of acid gas removal unit for integrated gasification combined cycle (IGCC) power plant with CO{sub 2} capture

Future integrated gasification combined cycle (IGCC) power plants with CO{sub 2} capture will face stricter operational and environmental constraints. Accurate values of relevant states/outputs/disturbances are needed to satisfy these constraints and to maximize the operational efficiency. Unfortunately, a number of these process variables cannot be measured while a number of them can be measured, but have low precision, reliability, or signal-to-noise ratio. In this work, a sensor placement (SP) algorithm is developed for optimal selection of sensor location, number, and type that can maximize the plant efficiency and result in a desired precision of the relevant measured/unmeasured states. In this work, an SP algorithm is developed for an selective, dual-stage Selexol-based acid gas removal (AGR) unit for an IGCC plant with pre-combustion CO{sub 2} capture. A comprehensive nonlinear dynamic model of the AGR unit is developed in Aspen Plus Dynamics® (APD) and used to generate a linear state-space model that is used in the SP algorithm. The SP algorithm is developed with the assumption that an optimal Kalman filter will be implemented in the plant for state and disturbance estimation. The algorithm is developed assuming steady-state Kalman filtering and steady-state operation of the plant. The control system is considered to operate based on the estimated states and thereby, captures the effects of the SP algorithm on the overall plant efficiency. The optimization problem is solved by Genetic Algorithm (GA) considering both linear and nonlinear equality and inequality constraints. Due to the very large number of candidate sets available for sensor placement and because of the long time that it takes to solve the constrained optimization problem that includes more than 1000 states, solution of this problem is computationally expensive. For reducing the computation time, parallel computing is performed using the Distributed Computing Server (DCS®) and the Parallel Computing® toolbox from Mathworks®. In this presentation, we will share our experience in setting up parallel computing using GA in the MATLAB® environment and present the overall approach for achieving higher computational efficiency in this framework.

20 FOSSIL-FUELED POWER PLANTS↗

A Hybrid AI/ML and Computational Mechanics Based Approach for Time-Series State and Fatigue Life Estimation of Nuclear Reactor Components

Environmental fatigue modeling is a complex problem due to multiple failure modes and their intermixing. The failure modes are function of various underlying causes in addition to the corrosive effect of reactor coolant environment. Some of the major causes are time-dependence of material associated with cyclic loading, load sequence effect associated with random/variable amplitude loading, effect of strain amplitude and rates, effect of varying temperature (along both temporal and spatial directions) and the effect of mean strain and stress. The nonlinear intermixing of failure modes associated with above mentioned causing parameters makes the environmental fatigue modeling is a challenging task. Because of this challenge, fatigue is traditionally being modeled based on experimental data. However, test based empirical approach often requires hundreds of fatigue tests to model the above-mentioned intermixing failure causes even for a single material system. The problem is further exaggerated for reactor component made from multi-material systems such as made from both carbon and stainless-steel base metals and their similar and dissimilar metal welds. With the difficulty of conducting hundreds of fatigue tests to capture the above-mentioned intermixing failure causes, fatigue modeling approaches often depends on empirical models based on limited available test data such as available through ASME code and NUREG 6909. However, these limited test-data-based models may not be enough to accurately predict the life of reactor components. Accurate prediction of life of reactor component would become a necessity, particularly when the license of the reactors to be extended for long-term-operation (LTO) that is for well beyond its original design life of 40 years. The requirement of extending the license of reactor under LTO requires hundreds of fatigue tests to be conducted to understand the mechanism associated with the above-mentioned interdependent failure causes. However, conducting large number of fatigue tests is not a feasibility due to the cost involved. To address this issues Argonne National Laboratory (ANL) with the sponsorship of DOE Light Water Reactor Sustainability (LWRS) program trying to develop a hybrid predictive modeling approach. This is based on limited experiment-data, Artificial-intelligence (AI) – Machine-Learning (ML) - Deep-Learning (DL) based techniques and Multiphysics-computational-mechanics based modeling tools. The hybrid approach not-only can improve the accuracy of the existing stress analysis and fatigue modeling approach but also can reduce the over-dependency on test-based approach. Towards this goal following are some of the major contributions based on ANL’s FY-20 environmental fatigue modeling activities: 1) A cyclic plasticity material model database for 82/182 dissimilar metal weld, which can be readily shared with US nuclear industry and regulatory agency on request. 2) A well validated analytical modeling methodology to perform cycle-by-cycle stress prediction under both constant amplitude fatigue loading and variable amplitude fatigue loading (with load-sequence effect). 3) An AI/ML/DL based methodology to predict unmeasurable cyclic strain based on other available sensor signals. This type of approach can be used for estimating strain in real reactor components from other sensor readings. 4) An AI/ML based approach to improve the US capability on environmental fatigue testing. This is by improving ANL’s existing environmental fatigue testing capacity to conduct ASME required strain-controlled tests (by controlling strain amplitudes and its rate), while not measuring the strain (due to the difficulty of placing an extensometer in a narrow autoclave in a PWR-water-test system). 5) A simulation and experiment based probabilistic modeling methodology for time-series fatigue state and life estimation of reactor metal such as dissimilar metal weld.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A state-space Bayesian framework for estimating biogeochemical transformations using time-lapse geophysical data

We develop a state-space Bayesian framework to combine time-lapse geophysical data with other types of information for quantitative estimation of biogeochemical parameters during bioremediation. We consider characteristics of end-products of biogeochemical transformations as state vectors, which evolve under constraints of local environments through evolution equations, and consider time-lapse geophysical data as available observations, which could be linked to the state vectors through petrophysical models. We estimate the state vectors and their associated unknown parameters over time using Markov chain Monte Carlo sampling methods. To demonstrate the use of the state-space approach, we apply it to complex resistivity data collected during laboratory column biostimulation experiments that were poised to precipitate iron and zinc sulfides during sulfate reduction. We develop a petrophysical model based on sphere-shaped cells to link the sulfide precipitate properties to the time-lapse geophysical attributes and estimate volume fraction of the sulfide precipitates, fraction of the dispersed, sulfide-encrusted cells, mean radius of the aggregated clusters, and permeability over the course of the experiments. Results of the case study suggest that the developed state-space approach permits the use of geophysical datasets for providing quantitative estimates of end-product characteristics and hydrological feedbacks associated with biogeochemical transformations. Although tested here on laboratory column experiment datasets, the developed framework provides the foundation needed for quantitative field-scale estimation of biogeochemical parameters over space and time using direct, but often sparse wellbore data with indirect, but more spatially extensive geophysical datasets.

54 ENVIRONMENTAL SCIENCES↗

State-Space Model to Estimate Salmon Escapement Using Multiple Data Sources

Abstract Accurate estimates of salmonids passing Lower Granite Dam on the Snake River, by species and origin, are a critical input to assessing the status and trends of various populations as well as successful management of fisheries in the Snake River basin. Here, we describe a state-space model that estimates such escapement past a dam by using window counts, PIT tag observations, and data from an adult fish trap, accounting for issues such as nighttime passage, fallback and reascension, potential observation error at the window, and uncertainty in the adult trap rate. We tested the approach using a simulation framework that mimicked several levels of observation error, differences between nighttime passage and reascension rates, and the possibility of the adult trap being closed for some period of time. Our results demonstrate that the model produced unbiased estimates across all tested scenarios. We also applied this model to empirical data from Lower Granite Dam to produce estimates of wild, clipped hatchery, and unclipped hatchery spring/summer-run Chinook Salmon Oncorhynchus tshawytscha and steelhead O. mykiss from spawn years 2010–2019.

See, Kevin E. (ORCID:0000000297626442)↗

State of battery health estimation based on swelling characteristics

There is disclosed an electrical device including a battery, and a battery management system. The battery management system includes a controller in electrical communication with a pressure sensor to monitor the state of health of the battery. The controller applies a method for determining the state of health that uses a non-electrical (mechanical) signal of force measurements combined with incremental capacity analysis to estimate the capacity fading and other health indicators of the battery with better precision than existing methods. The pressure sensor may provide the force measurement signal to the controller, which may determine which incremental capacity curve based on force to use for the particular battery. The controller then executes a program utilizing the data from the pressure sensor and the stored incremental capacity curves based on force to estimate the capacity fading and signal a user with the state of health percentage.

Stefanopoulou, Anna G.↗

Remediating Non-Positive Definite State Covariances for Collision Probability Estimation

The NASA Conjunction Assessment Risk Analysis team estimates the probability of collision (Pc) for a set of Earth-orbiting satellites. The Pc estimation software processes satellite position+velocity states and their associated covariance matri-ces. On occasion, the software encounters non-positive definite (NPD) state co-variances, which can adversely affect or prevent the Pc estimation process. Inter-polation inaccuracies appear to account for the majority of such covariances, alt-hough other mechanisms contribute also. This paper investigates the origin of NPD state covariance matrices, three different methods for remediating these co-variances when and if necessary, and the associated effects on the Pc estimation process.

Hall, Doyle T.↗

Alternative Fuel Vehicle Usage and Owner Demographics in New York State

With mounting concerns over climate change and the environmental impact of fossil fuels, the United States has witnessed a growing interest in alternative fuel vehicles (AFVs). In 2021, approximately 1.5 million battery EVs (BEVs), 0.8 million plug-in hybrid EVs (PHEVs), and 5.5 million hybrid EVs (HEVs) were registered in the United States. In the state of New York, a total of 51,900 BEVs, 44,600 PHEVs, and 221,600 HEVs were registered in 2021. The current report presents the results of an analysis of AFV adoption patterns in New York State and the rest of the United States based on data from the 2017 National Household Travel Survey (NHTS). Overall, the report reveals the demographics and mobility factors (e.g., household income, homeownership, and trip length) that contribute to the adoption of AFVs. This study provides insights that can inform policy decisions aimed at promoting sustainable transportation solutions.The 2017 NHTS data showed that the percentage of households owning at least one AFV is lower in New York City compared with that in other regions of New York State. From the NHTS samples, of the 25 households that owned at least one BEV in New York State, 15 households (60%) lived within a 5-mile radius, based on the great circle distance, of the nearest charging station, and 23 households (92%) lived within a 10-mile radius of the nearest charging station. Furthermore, among the 40 households in New York State that own at least one PHEV, 48% (19 households) lived within a 5-mile radius of the closest EV charging station, and 83% (33 households) lived within a 10-mile radius of the nearest charging station. The rest of the United States had a higher percentage of households that own at least one AFV compared with that of New York State. A comparison was made between EV adoption levels using NHTS and EValuateNY, which is a tool that gathers statistics on the electric car market in New York State. The estimates obtained from New York State household samples in NHTS were slightly lower than the data provided by EValuateNY. In New York State and the rest of the United States, households with higher incomes tended to have a higher proportion of AFV ownership compared with those with lower incomes. For example, households in New York State earning $\$ $150,000 or more had an approximately 6% share of owning at least one AFV, which was markedly higher than those earning less than $\$ $100,000 (less than 3%). Additionally, homeowners in New York State and the rest of the United States also exhibited a significantly higher share of AFV ownership compared with that of renters. In New York State, households that own at least one AFV tended to travel farther and had longer travel times compared with their counterparts without an AFV. In terms of households with at least one AFV, households with HEVs tended to have more person trips, longer person miles of travel, and more vehicle miles traveled, resulting in longer travel times than that of households with BEVs or PHEVs. Notably, households with AFVs had a slightly lower share of family and personal business trips but a higher share of social and recreational trips compared with households without AFVs. Additionally, households with at least one AFV tended to have a slightly higher share of walking trips than their counterparts without an AFV. However, the comparisons were not statistically significant. These travel patterns observed in New York State were consistent with those observed in other regions of the United States.

33 ADVANCED PROPULSION SYSTEMS↗

Constrained Block Nonlinear Neural Dynamical Models

Neural network modules conditioned by known priors can be effectively trained and combined to represent systems with nonlinear dynamics. This work explores a novel formulation for data-efficient learning of deep control-oriented nonlinear dynamical models by embedding local model structure and constraints. The proposed method consists of neural network blocks that represent input, state, and output dynamics with constraints placed on the network weights and system variables. For handling partially observable dynamical systems, we utilize a state observer neural network to estimate the states of the system's latent dynamics. We evaluate the performance of the proposed architecture and training methods on system identification tasks for three nonlinear systems: a continuous stirred tank reactor, a two tank interacting system, and an aerodynamics body. Models optimized with a few thousand system state observations accurately represent system dynamics in open loop simulation over thousands of time steps from a single set of initial conditions. Experimental results demonstrate an order of magnitude reduction in open-loop simulation mean squared error for our constrained, block-structured neural models when compared to traditional unstructured and unconstrained neural network models.

Skomski, Elliott↗

Estimation of steady-state and transcient power distributions for the RELAP analyses of the 1963 loss-of-flow and loss-of-pressure tests at BR2.

To support the safety analyses required for the conversion of the Belgian Reactor 2 (BR2) from highly-enriched uranium (HEU) to low-enriched uranium (LEU) fuel, the simulation of a number of loss-of-flow tests, with or without loss of pressure, has been undertaken. These tests were performed at BR2 in 1963 and used instrumented fuel assemblies (FAs) with thermocouples (TC) imbedded in the cladding as well as probes to measure the FAs power on the basis of their coolant temperature rise. The availability of experimental data for these tests offers an opportunity to better establish the credibility of the RELAP5-3D model and methodology used in the conversion analysis. In order to support the HEU to LEU conversion safety analyses of the BR2 reactor, RELAP simulations of a number of loss-of-flow/loss-of-pressure tests have been undertaken. Preliminary analyses showed that the conservative power distributions used historically in the BR2 RELAP model resulted in a significant overestimation of the peak cladding temperature during the transient. Therefore, it was concluded that better estimates of the steady-state and decay power distributions were needed to accurately predict the cladding temperatures measured during the tests and establish the credibility of the RELAP model and methodology. The new approach ('best estimate' methodology) uses the MCNP5, ORIGEN-2 and BERYL codes to obtain steady-state and decay power distributions for the BR2 core during the tests A/400/1, C/600/3 and F/400/1. This methodology can be easily extended to simulate any BR2 core configuration. Comparisons with measured peak cladding temperatures showed a much better agreement when power distributions obtained with the new methodology are used.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

MITgcm-AD v2: Open source tangent linear and adjoint modeling framework for the oceans and atmosphere enabled by the Automatic Differentiation tool Tapenade

The Massachusetts Institute of Technology General Circulation Model (MITgcm) is widely used by the climate science community to simulate planetary atmosphere and ocean circulations. A defining feature of the MITgcm is that it has been developed to be compatible with an algorithmic differentiation (AD) tool, TAF, enabling the generation of tangent-linear and adjoint models. These provide gradient information which enables dynamics-based sensitivity and attribution studies, state and parameter estimation, and rigorous uncertainty quantification. Importantly, gradient information is essential for computing comprehensive sensitivities and performing efficient large-scale data assimilation, ensuring that observations collected from satellites and in-situ measuring instruments can be effectively used to optimize a large uncertain control space. As a result, the MITgcm forms the dynamical core of a key data assimilation product employed by the physical oceanography research community: Estimating the Circulation and Climate of the Ocean (ECCO) state estimate. Although MITgcm and ECCO are used extensively within the research community, the AD tool TAF is proprietary and hence inaccessible to a large proportion of these users. The new version 2 (MITgcm-AD v2) framework introduced here is based on the source-to-source AD tool Tapenade, which has recently been open-sourced. Another feature of Tapenade is that it stores required variables by default (instead of recomputing them) which simplifies the implementation of efficient, AD-compatible code. The framework has been integrated with the MITgcm model’s main branch and is now freely available.

Adjoints↗

Orbit determination in the presence of unmodeled accelerations.

In the investigation discussed here, the unmodeled acceleration is approximated as a first-order stationary Gauss-Markov process which can be separated into a time wise correlated component and a purely random component. An extended form of the Kalman-Bucy filter is used to estimate the state and the unmodeled accelerations at each observation epoch. Applications of the estimation algorithm to simulated data and to tracking data obtained during the Apollo 10 and 11 missions indicate that a more accurate estimate of the state is obtained using the algorithm and that the estimated values of the unmodeled accelerations can be correlated with physical phenomena neglected by the mathematical model.

Tapley, B. D.↗

State-space self-tuning controllers for general multivariable stochastic systems

This paper presents a state-space approach for self-tuning control of a more general class of multivariable stochastic systems having a number of inputs equal or different from the number of outputs. The dynamic system is represented in the state-space innovation form with Luenberger's canonical structures. The model parameters and the Kalman gain are identified via either the extended least-squares algorithm or the least-squares ladder algorithm. The Kalman gain matrix and states can be estimated from the identified parameters without utilizing the standard state estimation algorithm. A long division method is introduced for finding the similarity transformation matrix.

Shieh, L. S.↗

Battery state of health monitoring by estimation of the number of cyclable Li-ions

Herein this paper introduces a method to monitor battery state of health (SOH) by estimating the number of cyclable Li-ions, a health-relevant electrochemical variable. SOH monitoring is critical to battery management in balancing the trade-off between maximizing system performance and minimizing battery degradation. The decrease of cyclable Li-ions indicates the effect on the SOH of degradation mechanisms that consume cyclable Li-ions. The unavailability of the number of cyclable Li-ions through non-invasive measurements makes its estimation necessary for in-situ SOH monitoring. In this paper, the extended Kalman filter (EKF) is used to estimate the number of cyclable Li-ions as an unknown battery parameter. The single particle model (SPM), a simplified battery electrochemical model, is used as the model in the EKF to achieve a computational complexity suitable for on-line estimation. Simulations are performed under typical electric vehicle current trajectories using an example parameter set for a hybrid-electric-vehicle battery. In the simulations, the battery is represented by the Doyle–Fuller–Newman (DFN) model, an electrochemical model with higher fidelity than the SPM. To comply with the practice, instead of using the same parameters as the DFN model in the SPM, parameterization of the SPM is performed before estimation of the number of cyclable Li-ions. The simulations show high estimation accuracy of the number of cyclable Li-ions using the EKF, even with the structural and parametric differences between the DFN model and the SPM, under both the ideal conditions and various non-ideal conditions (i.e., SOC estimation error, additional modeling error, and measurement noise).

25 ENERGY STORAGE↗

Digital flight control systems

The design of stable feedback control laws for sampled-data systems with variable rate sampling was investigated. These types of sampled-data systems arise naturally in digital flight control systems which use digital actuators where it is desirable to decrease the number of control computer output commands in order to save wear and tear of the associated equipment. The design of aircraft control systems which are optimally tolerant of sensor and actuator failures was also studied. Detection of the failed sensor or actuator must be resolved and if the estimate of the state is used in the control law, then it is also desirable to have an estimator which will give the optimal state estimate even under the failed conditions.

Caglayan, A. K.↗

Recent results of nonlinear estimators applied to hereditary systems.

An application of the extended Kalman filter to delayed systems to estimate the state and time delay is presented. Two nonlinear estimators are discussed and the results compared with those of the Kalman filter. For all the filters considered, the hereditary system was treated with the delay in the pure form and by using Pade approximations of the delay. A summary of the convergence properties of the filters studied is given. The results indicate that the linear filter applied to the delayed system performs inadequately while the nonlinear filters provide reasonable estimates of both the state and the parameters.

Schiess, J. R.↗

High-Performance Computing for Advanced Smart Grid Applications

The power grid is becoming far more complex as a result of the grid evolution meeting an information revolution. Due to the penetration of smart grid technologies, the grid is evolving as an unprecedented speed and the information infrastructure is fundamentally improved with a large number of smart meters and sensors that produce several orders of magnitude larger amounts of data. How to pull data in, perform analysis, and put information out in a real-time manner is a fundamental challenge in smart grid operation and planning. The future power grid requires high performance computing to be one of the foundational technologies in developing the algorithms and tools for the significantly increased complexity. New techniques and computational capabilities are required to meet the demands for higher reliability and better asset utilization, including advanced algorithms and computing hardware for large-scale modeling, simulation, and analysis. This chapter summarizes the computational challenges in smart grid and the need for high performance computing, and present examples of how high performance computing might be used for future smart grid operation and planning.

computational challenges↗

Enhanced Estimation of Quantum Properties with Common Randomized Measurements

We present a technique for enhancing the estimation of quantum state properties by incorporating approximate prior knowledge about the quantum state. This consists in performing randomized measurements on a quantum processor and comparing the results with those obtained from a classical computer that stores an approximation of the quantum state. We provide unbiased estimators for expectation values of multicopy observables and present performance guarantees in terms of variance bounds that depend on the prior knowledge accuracy. We demonstrate the effectiveness of our approach through experimental and numerical examples detecting mixed-state entanglement, and estimating polynomial approximations of the von Neumann entropy and state fidelities. Published by the American Physical Society 2024

Physics↗