Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Preparation and investigation of Dy3+-doped Ca9LiGd2/3(PO4)7 single-phase full-color phosphor

Highlights: • A novel single-phased Ca{sub 9}LiGd{sub 2/3}(PO{sub 4}){sub 7}:xDy{sup 3+} phosphor was firstly synthesized. • Its structure, luminescent properties are well studied and characterized. • It was promising as a single-component white-light-emitting phosphor for w-LEDs. - Abstract: Novel single-phased white-light-emitting Ca{sub 9}LiGd{sub 2/3}(PO{sub 4}){sub 7}:xDy{sup 3+} (x = 0.02, 0.05, 0.10, 0.15, 0.20, 0.25, and 0.30) β-Ca{sub 3}(PO{sub 4}){sub 2}-type phosphate phosphors were synthesized. The phase structure, luminescence, and thermal stability of the phosphors were characterized by X-ray powder diffraction analysis, photoluminescence excitation and emission spectra, thermal quenching, and decay curves. XRD analysis confirmed the phase formation of Ca{sub 9}LiGd{sub 2/3}(PO{sub 4}){sub 7}:Dy{sup 3+} materials. Under the excitation of 352 nm, the emission of the Ca{sub 9}LiGd{sub 2/3}(PO{sub 4}){sub 7}:0.20Dy{sup 3+} sample centered at blue (488 nm) and yellow (580 nm), which corresponded to {sup 4}F{sub 9/2}–{sup 6}H{sub 15/2} transition and {sup 4}F{sub 9/2}–{sup 6}H{sub 13/2} transition. The optimum dopant concentration of Dy{sup 3+} ions was around 20 mol%, and the critical transfer distance of Dy{sup 3+} was calculated as 18 Å. The thermal-quenching temperature was above 500 K for Ca{sub 9}LiGd{sub 2/3}(PO{sub 4}){sub 7}:0.20Dy{sup 3+}. The developed phosphor has a great potential as a single-component white-light-emitting phosphor for UV-light-emitting diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, deposition and characterization of magnesium hydroxide nanostructures on zeolite 4A

Research highlights: {yields} Reports a simple precipitation-growth method to produce nanostructures of Mg(OH){sub 2} on the surface of zeolite 4A. {yields} Able to control the growth of the nanostructures by manipulating the experimental procedure. {yields} Able to deposit Mg(OH){sub 2} onto specific sites namely bridging hydroxyl protons (SiOHAl) on the surface of zeolite 4A. -- Abstract: The precipitation and self-assembly of magnesium hydroxide Mg(OH){sub 2} nanopetals on dispersed zeolite 4A particles was investigated. Mg(OH){sub 2}/zeolite nanocomposites were produced from magnesium chloride solutions and characterized via X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Fourier transform infrared analysis (FTIR), and solid state NMR. It was determined that Mg(OH){sub 2} interacted with bridging hydroxyl protons (SiOHAl) on the zeolite surface, but not with silanol or aluminol groups. NMR analysis showed that 13% of the tetrahedral Al sites on the zeolite were converted to octahedral Al. The zeolite structure and crystallinity remained intact after treatment, and no dealumination reactions were detected. This suggests that the deposition-precipitation process at ambient conditions is a facile method for controlling Mg(OH){sub 2} nanostructures on zeolites.

36 MATERIALS SCIENCE↗

Characterization of microtexture of 316L stainless steel fiber after multi-pass drawing by electron backscatter diffraction

Highlights: • Three crystalline phases, γ, α′, and σ, in 316L stainless steel fibers are observed by XRD. • Strain-induced martensite and two types of twin boundaries are formed in drawn fibers. • The twin boundary generation is nucleate at high angle grain boundaries and then bulge into the {112}<111> grain. • A route of the formation mechanism of deformation twins was analyzed by EBSD. - Abstract: The microstructure and microtexture of 316L stainless steel fibers (SSFs) after multi-pass cold drawing with intermediate heat treatment were investigated in this study. The crystalline phases of SSFs were identified and quantified using X-ray diffraction (XRD) analysis. Grain orientation and boundary characterization in the mantle and core regions of drawing direction (DD) were analyzed through electron backscatter diffraction (EBSD). The coincident site lattice approach provides beneficial information for defining twin boundary and analyzing the orientation relationship between neighboring grains on the Σ3 segment. Three crystalline phases, γ, α, and σ, could be seen in XRD profiles. The formation mechanism of deformation twins was found, and two types of twin boundaries were observed in the drawn fibers by EBSD. The twin boundary generated between a {112}<111> grain and a <100>//DD grain is believed to nucleate at a high-angle grain boundary and then bulge into the copper grain.

36 MATERIALS SCIENCE↗

Investigation of intrinsic and extrinsic defects effective role on producing intense red emission in ZnO:Eu nanostructures

Highlights: • Effective role of defects on producing red emission at indirect excitation. • V{sub Zn} and V{sub O} defects have important role on energy transfer. • Mg related defects and Zn{sub i} defects were responsible for blue emission. • Extrinsic and intrinsic defects mediated energy transfer to sensitize Eu{sup 3+} ions. • Decrease of red emission because of diminishing in oxygen vacancy. - Abstract: Europium doped ZnO nanorads and nanosheets were synthesized by hydrothermal method. Effects of Mg doping, morphology and annealing in oxygen ambient on structural and optical properties of ZnO nanostructures were investigated using X-ray diffraction (XRD), particle size analysis (PSA), thermo gravimetric analysis (TGA), differential thermal analysis (DTA), differential thermo gravimetry (DTG), scanning electron microscopy (SEM) and photoluminescence spectroscopy (PL). This study recommends that both of intrinsic and extrinsic defects facilitate energy transfer (ET) from the ZnO host to Eu{sup 3+} ions and consequently have efficient role on producing intense red emission at indirect excitation. The results also showed that annealing process improved the crystal structure of ZnO nanosheets due to decrease of surface defects; however decreased ET and red emission because of diminishing in oxygen vacancy. In addition in ZnO nanorods sample with more surface area in comparison with ZnO nanosheets sample deep level emissions are enhanced.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reentrant polar phase induced by the ferroionic coupling in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles

Using the model of four sublattices, the Landau-Ginzburg-Devonshire-Kittel phenomenological approach and the Stephenson-Highland ionic adsorption model for the description of coupled polar and antipolar long-range orders in ferroics, we analytically calculated the phase diagrams and polar properties of B⁢i 1−𝑥 ⁢S⁢m 𝑥⁢ Fe⁢O 3 nanoparticles covered by surface ions with dependence on their size, surface ions density, samarium content 𝑥 , and temperature. The size effects and ferroionic coupling govern the appearance and stability conditions of the long-range ordered ferroelectric, reentrant ferrielectric, and antiferroelectric phases in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles. Calculated phase diagrams are in qualitative agreement with the x-ray diffraction phase analysis, electron paramagnetic resonance, infrared spectroscopy, and electrophysical measurements of B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanopowders sintered by the solution combustion method. The combined theoretical-experimental approach allows us to explain the influence of the ferroionic coupling and size effects in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles on their polar properties.

antiferroelectricity↗

SLUDGE BATCH VARIABILITY STUDY WITH FRIT 418

The Defense Waste Processing Facility (DWPF) initiated processing Sludge Batch 6 (SB6) in the summer of 2010. In support of processing, the Savannah River National Laboratory (SRNL) provided a recommendation to utilize Frit 418 to process SB6. This recommendation was based on assessments of the compositional projections for SB6 available at the time from the Liquid Waste Organization (LWO) and SRNL (using a model-based approach). To support qualification of SB6, SRNL executed a variability study to assess the applicability of the current durability models for SB6. The durability models were assessed over the expected Frit 418-SB6 composition range. Seventeen glasses were selected for the variability study based on the sludge projections used in the frit recommendation. Five of the glasses are based on the centroid of the compositional region, spanning a waste loading (WL) range of 32 to 40%. The remaining twelve glasses are extreme vertices (EVs) of the sludge region of interest for SB6 combined with Frit 418 and are all at 36% WL. These glasses were fabricated and characterized using chemical composition analysis, X-ray diffraction (XRD) and the Product Consistency Test (PCT). After initiating the SB6 variability study, the measured composition of the SB6 Tank 51 qualification glass produced at the SRNL Shielded Cells Facility indicated that thorium was present in the glass at an appreciable concentration (1.03 wt%), which made it a reportable element for SB6. This concentration of ThO{sub 2} resulted in a second phase of experimental studies. Five glasses were formulated that were based on the centroid of the new sludge compositional region combined with Frit 418, spanning a WL range of 32 to 40%. These glasses were fabricated and characterized using chemical composition analysis and the PCT. Based on the measured PCT response, all of the glasses (with and without thorium) were acceptable with respect to the Environmental Assessment (EA) reference glass regardless of thermal history. All of the normalized boron releases were less than 1 g/L. While all of the targeted glass compositions were predictable with respect to the Product Composition Control System (PCCS) models for durability, a small number of the measured glass compositions were located outside of the lower prediction limit indicating poorer durability than what was actually measured. These unpredictable glasses were in the same lithium metaborate (LM) preparation block during the chemical analyses, which resulted in measured compositions that were not representative of the target compositions. A review of the data did not indicate a clear cause for the problem. Re-digestion and re-measurement of three glasses from this preparation block yielded glass compositions closer to the target values and predicted PCT responses within the PCCS model uncertainty. Therefore, it is believed that the glasses were correctly fabricated and the targeted compositions are closer representations of the true compositions. Per the requirements of the DWPF Glass Product Control Program, the PCCS durability models have been shown to be applicable for the SB6/Frit 418 glass system. PCT results from the glasses fabricated as part of the variability study were shown to be predictable and/or acceptable with respect to the DWPF PCCS models. In addition, the inclusion of ThO{sub 2} was shown to have minimal impact on the acceptability and predictability of the variability study glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Magnetocaloric Effect in La{sub 0.67}Ba{sub 0.33}Mn{sub 0.95}Ni{sub 0.05}O{sub 3} Manganite Near Room Temperature

We report the structural, magnetic, and magnetocaloric properties of La{sub 0.67}Ba{sub 0.33}Mn{sub 0.95}Ni{sub 0.05}O{sub 3} (LBMNO) manganite, synthesized by sol-gel method. X-ray diffraction (XRD) analysis using Rietveld refinement showed that this sample crystallizes in the rhombohedral structure with R 3-bar c space group. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analysis were used to confirm the structure formation of the LBMNO material. The temperature dependent magnetization data revealed a transition from ferromagnetic (FM) to paramagnetic (PM) phase at T{sub C}= 308 K. Using Arrott plots, it was found that the transition is of a second order. From the measured magnetization data as a function of magnetic applied field, the magnetic entropy change (−ΔS{sub M}) and the relative cooling power RCP have been determined. In the vicinity of T{sub C} (−ΔS{sub M}) reached a maximum value of 2.15 J kg{sup − 1} K{sup − 1} and a large RCP value of about 299 J kg{sup − 1} under 5 T{sup − 1}. This magnetocaloric effect has been analyzed by considering the Landau theory of magnetic phase transition. Consequently, our sample can be considered a promising material in room-temperature magnetic refrigeration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗

Structure and microwave dielectric properties of Ba{sub 3}(VO{sub 4}){sub 2}–Zn{sub 2−x}SiO{sub 4−x} ceramic composites

Highlights: ► New Ba{sub 3}(VO{sub 4}){sub 2}–Zn{sub 1.87}SiO{sub 3.87} microwave dielectric composite ceramic was reported. ► The single-phase willemite was obtained by controlling of ZnO deficiency. ► The composite with 40 wt% Zn{sub 1.87}SiO{sub 3.87} exhibited excellent τ{sub f} value of 0.4 ppm/°C. - Abstract: Microwave dielectric ceramic composites with compositions of (1 − y)Ba{sub 3}(VO{sub 4}){sub 2}–yZn{sub 2−x}SiO{sub 4−x} (y = 0.4–0.6, x = 0.13) have been prepared by firing mixtures of Ba{sub 3}(VO{sub 4}){sub 2} and Zn{sub 1.87}SiO{sub 3.87}. The X-ray diffraction (XRD) analysis revealed that Zn{sub 2}SiO{sub 4} with a willemite phase can be obtained by appropriately controlling the ZnO deficiency. The starting Zn{sub 1.87}SiO{sub 3.87} powder should be thus composed of the ZnSiO{sub 4} crystal phase and redundant SiO{sub 2} amorphous phase at room temperature. The scanning electron microscopy studies demonstrated the coexistence of Zn{sub 2}SiO{sub 4} and Ba{sub 3}(VO{sub 4}){sub 2} phases in the sintered bodies, as further confirmed by the XRD and Raman results. The near-zero temperature coefficients of the resonant frequency (τ{sub f}) could be achieved by adjusting the relative content of the two phases owing to their opposite τ{sub f} values. The existence of a slight amount of secondary phases, element interdiffusion and non-stoichiometry such as Zn deficiency altogether made the predicted property values deviate from the experimentally measured ones. The composite ceramics with 40 wt% Zn{sub 1.87}SiO{sub 3.87} sintered at 1100 °C exhibited desirable microwave dielectric properties of the quality factor Q × f ∼ 23,000 GHz, dielectric constant ε{sub r} ∼ 9.3, and τ{sub f} ∼ 0.4 ppm/°C.

36 MATERIALS SCIENCE↗

MgCoAl and NiCoAl LDHs synthesized by the hydrothermal urea hydrolysis method: Structural characterization and thermal decomposition

Highlights: • We synthesized MgCoAl and NiCoAl LDHs by the urea hydrolysis method. • Aluminum rich and crystalline materials have been formed. • The calcination of the LDHs generated mixed oxides with high surface areas. - Abstract: Layered double hydroxides (LDHs) with Mg/Co/Al and Ni/Co/Al were synthesized for the first time by the urea hydrolysis method. The experimental conditions promoted aluminum rich and crystalline materials. The formation of LDHs was investigated by powder X-ray diffraction (XRD), chemical analysis, solid state nuclear magnetic resonance with magic angle spinning ({sup 27}Al-MAS-NMR), simultaneous thermogravimetric/differential thermal analysis (TGA/DTA), FTIR spectroscopy, scanning electron microscopy (SEM), and N{sub 2} adsorption–desorption experiments. A single phase corresponding to LDH could be obtained in all the investigated compositions. Thermal calcination of these LDHs at 500 °C resulted in the formation of solid solutions in which Al{sup 3+} was dissolved. All the calcined materials have rock-salt like structures and high surface areas.

36 MATERIALS SCIENCE↗

Fuel mixture approach for solution combustion synthesis of Ca{sub 3}Al{sub 2}O{sub 6} powders

Single-phase 3CaO.Al{sub 2}O{sub 3} powders were prepared via solution combustion synthesis using a fuel mixture of urea and {beta}-alanine. The concept of using this fuel mixture comes from the individual reactivity of calcium nitrate and aluminum nitrate with respect to urea and {beta}-alanine. It was proved that urea is the optimum fuel for Al(NO{sub 3}){sub 3} whereas {beta}-alanine is the most suitable fuel for Ca(NO{sub 3}){sub 2}. X-ray diffraction and thermal analysis investigations revealed that heating at 300 deg. C the precursor mixture containing the desired metal nitrates, urea and {beta}-alanine triggers a vigorous combustion reaction, which yields single-phase nanocrystalline 3CaO.Al{sub 2}O{sub 3} powder (33.3 nm). In this case additional annealing was no longer required. The use of a single fuel failed to ensure the formation of 3CaO.Al{sub 2}O{sub 3} directly from the combustion reaction. After annealing at 900 deg. C for 1 h, the powders obtained by using a single fuel (urea or {beta}-alanine) developed a phase composition comprising of 3CaO.Al{sub 2}O{sub 3}, 12CaO.7Al{sub 2}O{sub 3} and CaO.

36 MATERIALS SCIENCE↗

A Comprehensive Analysis of the Interphasial and Structural Evolution over Long–Term Cycling of Ultrahigh–Nickel Cathodes in Lithium–Ion Batteries

Ultrahigh-Ni layered oxides hold great promise as high-energy-density cathodes at an affordable cost for lithium-ion batteries, yet their practical application is greatly hampered by the poor cyclability. Herein, by employing LiNi 0.94 Co 0.06 O 2 as a model cathode in a full-cell configuration, the interphasial and structural evolution processes of ultrahigh-Ni layered oxides are systematically investigated over the course of their service life (1500 cycles). By applying advanced analytic techniques (e.g., Li-isotope labeling, region-of-interest method), the dynamic chemical evolution on the cathode surface is revealed with spatial resolution, and the correlation between lattice distortion and cathode surface reactivity is established. Benefiting from in situ X-ray diffraction (XRD) analysis, the ultrahigh-Ni layered oxide is demonstrated to undergo dual-phase reaction mechanisms with huge lattice variation, which leads to a decrease in crystallinity and secondary particle pulverization. Furthermore, the critical impact of cathode surface reaction on the graphite anode–electrolyte interphase (AEI) is revealed at nanometer scale, and a universal chemical/physical evolution process of the AEI is illustrated, for the first time. Finally, the practical viability of ultrahigh-Ni layered oxides is demonstrated through Al-doping strategy. Finally, this work presents a comprehensive understanding of the structural and interphasial degradation of ultrahigh-Ni layered oxide cathodes for developing high-energy-density lithium-ion batteries.

25 ENERGY STORAGE↗

Physicochemical Properties and Structure of the Bone Matrix in Simulated Tuberculous Osteitis

The physicochemical properties and structure of the bone matrix are studied in a case of simulated tuberculous osteitis without treatment and after a full course of specific antibacterial therapy. Using X-ray diffraction, infrared spectroscopy, thermal analysis, and scanning electron microscopy, we revealed that tuberculous osteitis causes fine disintegration of the bone matrix due to an increase in nonstoichiometric hydroxyapatite, formation of amorphous calcium phosphates, and a decrease of the organic phase, which is accompanied by embrittlement of the bone matrix. Excessive growth of carbonate-hydroxyapatite crystals of a mixed AB substitution type leads to excessive osteogenesis, accompanied by the uncontrolled growth of bone trabeculae. The presence of “liming” regions in the crystal lattice of hydroxyapatite increases the “binding” properties of the bone matrix in which mycobacteria are immobilized and removed in the composition of detritus.

60 APPLIED LIFE SCIENCES↗

The preparation and characterization of iron fluorides polymorphs FeF{sub 3}·0.33H{sub 2}O and β-FeF{sub 3}∙3H{sub 2}O as cathode materials for lithium-ion batteries

Graphical abstract: Better rate capability and cycling performance were observed for β-FeF{sub 3}·3H{sub 2}O/C prepared by mechano-chemical synthesis. - Highlights: • A novel mechano-chemical preparation method. • The use of NH{sub 4}F as starting material. • Better electro-chemical performance in the case of β-FeF{sub 3}·3H{sub 2}O/C. - Abstract: Two kinds of iron fluorides, FeF{sub 3}·0.33H{sub 2}O and β-FeF{sub 3}∙3H{sub 2}O, have been synthesized by different chemical routes using Fe(NO{sub 3}){sub 3}·9H{sub 2}O and NH{sub 4}F as precursors and investigated as cathode materials for secondary lithium batteries. β-FeF{sub 3}·3H{sub 2}O was obtained via a mechano-chemical process and FeF{sub 3}·0.33H{sub 2}O was obtained by a precipitation reaction from ethanol solution. To further improve their electrochemical properties, a ball milling process with carbon has been used to form composites. The fluorides were characterized by X-ray diffraction (XRD), thermal analysis, FTIR spectroscopy, galvanostatic charge/discharge and cyclic voltammetry measurements. The results showed that the as-prepared β-FeF{sub 3}·3H{sub 2}O/C exhibited better rate performance and cycling stability. It exhibited an initial discharge capacity of 199.6 mA h g{sup −1} at a current density of 20 mA g{sup −1} in a voltage range of 1.8–4.5 V and still reserved a discharge capacity of about 146.5 mA h g{sup −1} after 10 cycles. Only a capacity loss of 15 mA h g{sup −1} and 7 mA h g{sup −1} was observed when the current density was at 40 mA g{sup −1} and 80 mA g{sup −1}, respectively.

36 MATERIALS SCIENCE↗

Syntheses, structures and magnetisms of copper(II)–azido coordination compounds with p-substituted benzoates as coligands

Employing p-substituted benzoates with electron-withdrawing/electron-donating groups as coligands, four copper–azido compounds, [Cu{sub 1.5}(p-NO{sub 2}-benzoate)(N{sub 3}){sub 2}(H{sub 2}O)]{sub n} (1), [Cu(p-NO{sub 2}-benzoate)(N{sub 3})(H{sub 2}O)]{sub n} (2), [Cu(p-OH-benzoate)(N{sub 3})(H{sub 2}O)]{sub n}·nH{sub 2}O (3) and [Cu(p-CH{sub 3}-benzoate)(N{sub 3})]{sub n} (4), have been hydrothermally synthesized and structurally charactierized by single crystal X-ray diffraction. Structural analysis reveals that all compounds are composed of mixed EO-azido and syn–syn carboxylato-bridged Cu-N{sub 3}/COO chains. Compound 1 features the alternating triple-bridged (μ-EO-N{sub 3})(μ-COO)(μ-H{sub 2}O) and the double-bridged (EO-N{sub 3}){sub 2} modes. Both of 2 and 3 display the triple-bridged fashion (μ-EO-N{sub 3})(μ-COO)(μ-H{sub 2}O). While 4 exhibits the double-bridged mode (μ-EO-N{sub 3})(μ-COO). Based on hydrogen-bonding interactions, Cu–N{sub 3}/COO chains in 1–3 are further connected to form 3D supramolecular frameworks. As for compound 4, there are not hydrogen-bonding interactions when the p-CH{sub 3} substituted benzoate is employed as coligand. These compounds show intrachain ferromagnetic performance and different bulk properties. Remarkably, 1 features metamagnetism from antiferromagnetism to ferrimagnetism, while 3 reveals long-range ferromagnetic ordering between Cu(II) ions. Magneto-structural correlation has been also investigated. - Graphical abstract: With p-substituted benzoates as coligands, copper–azido compounds were isolated and structrually, magnetically characterized. Magneto-structural correlation has been investigated in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control of asymmetric strain relaxation in InGaAs grown by molecular-beam epitaxy

InGaAs strain relaxation is studied by an in situ multibeam optical stress sensor (MOSS). Strain relaxation during growth of InGaAs on GaAs occurs at different thicknesses and rates along the directions perpendicular to its misfit dislocations, [110] and [110]. We show the asymmetry of relaxation between these directions in real time by aligning the MOSS laser array along [110] and [110]. This asymmetric relaxation data from the MOSS correlates with both x-ray diffraction relaxation analysis and an estimation of the misfit dislocation density from transmission electron microscopy images. Lowering the V/III ratio or raising the growth temperature lowers the thickness of the onset of dislocation formation, changes the relaxation rate, lowers the final relaxation during 2 {mu}m of growth, and shifts the initial direction of relaxation from [110] to [110]. We identify two phases of relaxation that occur at different growth thicknesses. Lowering the V/III ratio changes the relative contribution of each of these phases to the total relaxation of the epilayer.

36 MATERIALS SCIENCE↗

Uptake and binding of La 3+ and Cr 3+ ions by alkali metal substituted alpha-zirconium phosphate

The conversion of alpha-zirconium phosphate, Zr(HPO 4 ) 2 ·H 2 O, to the K-, Rb-, and Cs-phases and the subsequent ion exchange behavior of these alkali metal phases, A-ZrP, with La 3+ and Cr 3+ have been investigated. The conversion to the A-ZrP phases was achieved by reaction with metal chloride, metal hydroxide solution, and confirmed through various techniques, including X-ray powder diffraction, thermogravimetry analysis, IR spectroscopy, scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy. The effect of material hydration, which increased the interlayer distance, was also examined. The ion exchange behavior of the A-ZrP showed strong affinity for both La 3+ , a representative for trivalent lanthanide metals, and Cr 3+ , a representative for the trivalent transition metals, with a rapid, near quantitative removal of the M 3+ ions at a pH of 3 when the ion concentration was ≤25% of the ion exchange capacity of the materials. Additionally, the ion affinity was shown to be pH and concentration-dependent, decreasing with a decrease in pH or an increase in ion concentration. Lastly, the binding strength of La- and Cr-loaded ZrP materials was examined through a series of leaching experiments in a carbonate buffer, phosphate buffer, HEPES buffer, and a series of EDTA solutions at various concentrations. No observable leaching occurred in the carbonate buffer, phosphate buffer, HEPES buffer, or when the EDTA concentration was below 0.1 mM. These results highlight the potential for the A-ZrP materials to provide a platform for trivalent transition metal and trivalent lanthanide radionuclide capture for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unprecedented solid-state chemical reaction-from (C{sub 3}N{sub 2}H{sub 5}){sub 3}SbBr{sub 6}.H{sub 2}Oto(C{sub 3}N{sub 2}H{sub 5}){sub 5}Sb{sub 2}Br{sub 11}. From centrosymmetric to non-centrosymmetric crystal structure

Tris(imidazolium) hexabromoantimonate(III) hydrate, (C{sub 3}N{sub 2}H{sub 5}){sub 3}SbBr{sub 6}.H{sub 2}O, (abbreviated as TIBA) has been synthesized and characterized by X-ray (at 295, 225, 160, and 110 K), differential scanning calorimetry, dilatometry, and dielectric spectroscopy. At room temperature (phase I), the structure consists of discrete SbB{sub 6}{sup -} anions, disordered imidazolium cations, and water molecules forming a 3D array of hydrogen bonds. Below room temperature, TIBA was found to undergo isostructural discontinuous phase transition at 212/221 K (cooling-heating) (P2{sub 1}/c{r_reversible}P2{sub 1}/c). The phase transition mechanism is characterized by two contributions: an order-disorder (cationic substructure) and a displacive (water molecules) one. At high temperatures, the TIBA crystal was found to undergo an unprecedented in situ solid-state chemical reaction: (1)2(C{sub 3}N{sub 2}H{sub 5}){sub 3}SbBr{sub 6}.H{sub 2}O{sub (S)}{yields}(C{sub 3}N{sub 2}H{sub 5}){sub 5}Sb{sub 2}Br{sub 11(S)}+(C{sub 3}N{sub 2}H{sub 5})Br{sub (S)}+2H{sub 2}O This chemical transformation leads to multiphase crystallites dominated by an amorphous phase of (C{sub 3}N{sub 2}H{sub 5}){sub 5}Sb{sub 2}Br{sub 11}. The creation of ferroelectric crystallites - (C{sub 3}N{sub 2}H{sub 5}){sub 5}Sb{sub 2}Br{sub 11} - in an 'annealed' sample of (C{sub 3}N{sub 2}H{sub 5}){sub 3}SbBr{sub 6}.H{sub 2}O was confirmed by X-ray diffraction phase analysis, dielectric spectroscopy, and pyroelectric measurements. The dielectric response of the electric permittivity and the critical slowing down of the process observed near 140 K in the 'annealed' sample of TIBA are treated as a 'fingerprint' of a neat (C{sub 3}N{sub 2}H{sub 5}){sub 5}Sb{sub 2}Br{sub 11} ferroelectric. -- Graphical Abstract: Chemical reaction taking place in (C{sub 3}N{sub 2}H{sub 5}){sub 3}SbBr{sub 6}.H{sub 2}O at 328 K. Display Omitted

36 MATERIALS SCIENCE↗