Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

The Practical Calculation of the Aerodynamic Characteristics of Slender Finned Vehicles

The basic objective of this thesis is to provide a practical method of computing the aerodynamic characteristics of slender finned vehicles such as sounding rockets, high speed bombs, and guided missiles. The aerodynamic characteristics considered are the normal force coefficient derivative, c(sub N(sub alpha)); center of pressure, bar-X; roll forcing moment coefficient derivative, c(sub l(sub delta)); roll damping moment coefficient derivative, c(sub l(sub p)); pitch damping moment coefficient derivative, c(sub mq); and the drag coefficient, c (sub D). Equations are determined for both subsonic and supersonic flow. No attempts is made to analyze the transonic region. The general configuration to which the relations are applicable is a slender axisymmetric body having three or four fins.

Barrowman, James S.↗

Detection and quantification of residual alpha-phase in delta-stabilized plutonium

The temperature range of the {delta}-phase field of plutonium can be expanded by alloying with Group IIIA elements. Ga is a particularly potent {delta}-stabilizer and effectively stabilizes the {delta}-phase to room temperature. Due to a strong propensity towards solute redistribution during cooling through the {var_epsilon} {yields} {delta} phase field, regions of the material often do not contain enough solute to stabilize the {delta}-phase even after extensive homogenization annealing in the {delta}-phase field . The result is a small but persistent, fraction of {alpha}-phase in the material. A technique using differential scanning calorimetry to measure the enthalpy of transformation of the plutonium {alpha} {yields} {beta} transformation is described which can detect and quantify {alpha}-phase in a {delta}-phase matrix at levels as low as {approx} 0.1 wt. %. A set of Pu-1.7 atomic % Ga alloys was examined using the technique and found to contain 0.32 {+-} 0.06 weight % {alpha}-phase. Complications arise due to interference from the pressure-induced {alpha}{prime}-phase, and a peak separation method was developed to accurately measure the heat signal from each phase. Due to the presence of Ga in the {alpha}-phase, the onset temperature of the {alpha} {yields} {beta} transformation in these specimens was found to be 140.2 C, significantly higher than that for the transformation in pure plutonium, 126.2 C.

36 MATERIALS SCIENCE↗

Refinement of the crystal structure of the high-temperature phase G{sub 0} in (NH{sub 4}){sub 2}WO{sub 2}F{sub 4} (powder, X-ray, and neutron scattering)

The (NH{sub 4}){sub 2}WO{sub 2}F{sub 4} compound undergoes a series of phase transitions: G{sub 0} {yields} 201, K {yields} G{sub 1} {yields} 160, and K {yields} G{sub 2}, with a significant change in entropy ({Delta}S{sub 1} {approx} Rln10 at the G{sub 0} {yields} G{sub 1} transition), which indicates significant orientational disordering in the G{sub 0} phase and the order-disorder type of the phase transition. X-ray diffraction is used to identify the crystal structure of the G{sub 0} phase as rhombohedral (sp. gr. Cmcm, Z = 4), determine the lattice parameters and the positions of all atoms (except hydrogen), and show that [WO{sub 2}F{sub 4}]{sup 2-} ions can form a superposition of dynamic and static orientational disorders in the anionic sublattice. A determination of the orientational position of [NH{sub 4}]{sup +} ions calls for the combined method of elastic and inelastic neutron scattering. Inelastic neutron scattering is used to determine the state of hindered rotation for ammonium ions in the G{sub 0} phase. Powder neutron diffraction shows that the orientational disorder of NH{sub 4} ions can adequately be described within the free-rotation approximation.

36 MATERIALS SCIENCE↗

Finite-size instabilities in nuclear energy density functionals

The systematic lack of convergence of self-consistent mean-field calculations with certain parameterizations of the Skyrme energy density functional has been attributed to the appearance of finite-size instabilities. In this contribution, we investigate what happens at the instability associated with the C{sub 0}{sup {Delta}s}s{sub 0} Dot-Operator {Delta}s{sub 0} term in a high-spin state of the superdeformed band in {sup 194}Hg.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A comparison of high resolution upwind solvers on 3-D inviscid hypersonic flows

A detailed comparison of numerical results obtained by solving the Euler equations for the inviscid flow over delta wings in reentry configurations is presented. The investigation involves a side-by-side comparison between independently developed upwind Euler solvers at VKI (M3D) and NASA Johnson Space Center (E3D) using identical grids. In both solvers the governing equations are integrated by means of time marching finite volume shock capturing methods, based on a cell centered upwind evaluation of the cell face fluxes and nonlinear limiters. High resolution schemes are obtained via MUSCL characteristic variable extrapolation to ensure total variation diminishing (TVD) properties and therefore monotonic discontinuity capturing. Further comparisons are made with several published results by other authors based on both upwind and central discretizations. The present results contribute in asserting the high resolution upwind TVD schemes as the most reliable numerical technique to handle the strong discontinuities typical of high speed flows. The performances of the two upwind solvers are satisfactory and the numerical results in good agreement. However, the important issue of reaching a grid converged solution for the present complex three-dimensional inviscid flow problems was not achieved.

Manna, M.↗

The Turbulent Boundary Layer on a Rough Curvilinear Surface

A number of semiempirical approximate methods exist for determining the characteristics of the turbulent boundary layer on a curvilinear surface. At present, among these methods, the one proposed by L. G. Loitsianskii is given frequent practical application. This method is sufficiently effective and permits, in the case of wing profiles with technically smooth surfaces, calculating the basic characteristics of the boundary layer and the values of the overall drag with an accuracy which suffices for practical purposes. The idea of making use of the basic integral momentum equation ((d delta(sup xx))/dx) + ((V' delta(sup xx))/V) (2 + H) = (tau(sub 0))/(rho V(exp 2)) proves to be fruitful also for the solution of the problems in the determination of the characteristics of the turbulent boundary layer on a rough surface.

Droblenkov, V. F.↗

Pressure-Sensitive Paint Investigation of Double-Delta Wing Vortex Flow Manipulation

A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to quantify the effect of wing fillets on the global vortex-induced surface static pressure field about a sharp leading-edge 76 deg/40 deg double delta wing, or strake-wing, model at subsonic and transonic speeds. Global calibrations of the PSP were obtained at M = 0.50, 0.70, 0.85, 0.95, and 1.20, a Reynolds number per unit length of 2.0 million, and angles of attack from 10 degrees to 30 degrees using an in-situ method featuring the simultaneous acquisition of electronically-scanned pressures (ESP) at discrete locations on the model. The mean error in the PSP measurements relative to the ESP data was approximately 2 percent or less at M = 0.50 to 0.85 but increased to several percent at M = 0.95 and 1.20. The PSP pressure distributions and pseudo-colored planform view pressure maps clearly revealed the vortex-induced pressure signatures at all Mach numbers and angles of attack. Small fillets having a parabolic or diamond planform situated at the strake-wing intersection were designed to manipulate the vortical flows by, respectively, removing the leading-edge discontinuity or introducing additional discontinuities. The fillets caused global changes in the vortex-dominated surface pressure field that were effectively captured in the PSP measurements. The vortex surface pressure signatures were compared to available off-surface vortex cross-flow structures obtained using a laser vapor screen (LVS) flow visualization technique. The fillet effects on the PSP pressure distributions and the observed leading-edge vortex flow characteristics were consistent with the trends in the measured lift, drag, and pitching moment coefficients.

Erickson, Gary E.↗

Pressure-Sensitive Paint Investigation of Double-Delta Wing Vortex Flow Manipulation

A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to quantify the effect of wing fillets on the global vortex-induced surface static pressure field about a sharp leading-edge 76o/40o double delta wing, or strake-wing, model at subsonic and transonic speeds. Global calibrations of the PSP were obtained at M = 0.50, 0.70, 0.85, 0.95, and 1.20, a Reynolds number per unit length of 2.0 million, and angles of attack from 10 degrees to 20 degrees using an in-situ method featuring the simultaneous acquisition of electronically-scanned pressures (ESP) at discrete locations on the model. The mean error in the PSP measurements relative to the ESP data was approximately 2 percent or less at M = 0.50 to 0.85 but increased to several percent at M =0.95 and 1.20. The PSP pressure distributions and pseudo-colored planform view pressure maps clearly revealed the vortex-induced pressure signatures at all Mach numbers and angles of attack. Small fillets having a parabolic or diamond planform situated at the strake-wing intersection were designed to manipulate the vortical flows by, respectively, removing the leading-edge discontinuity or introducing additional discontinuities. The fillets caused global changes in the vortex-dominated surface pressure field that were effectively captured in the PSP measurements. The vortex surface pressure signatures were compared to available off-surface vortex cross-flow structures obtained using a laser vapor screen (LVS) flow visualization technique. The fillet effects on the PSP pressure distributions and the observed leading-edge vortex flow characteristics were consistent with the trends in the measured lift, drag, and pitching moment coefficients.

Erickson, Gary E.↗

Wind Tunnel Application of a Pressure-Sensitive Paint Technique to a Double Delta Wing Model at Subsonic and Transonic Speeds

A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to study the effect of wing fillets on the global vortex induced surface static pressure field about a sharp leading-edge 76 deg./40 deg. double delta wing, or strake-wing, model at subsonic and transonic speeds. Global calibrations of the PSP were obtained at M(sub infinity) = 0.50, 0.70, 0.85, 0.95, and 1.20, a Reynolds number per unit length of 2.0 million, and angles of attack from 10 degrees to 20 degrees using an insitu method featuring the simultaneous acquisition of electronically scanned pressures (ESP) at discrete locations on the model. The mean error in the PSP measurements relative to the ESP data was approximately 2 percent or less at M(sub infinity) = 0.50 to 0.85 but increased to several percent at M(sub infinity) =0.95 and 1.20. The PSP pressure distributions and pseudo-colored, planform-view pressure maps clearly revealed the vortex-induced pressure signatures at all Mach numbers and angles of attack. Small fillets having parabolic or diamond planforms situated at the strake-wing intersection were respectively designed to manipulate the vortical flows by removing the leading-edge discontinuity or introducing additional discontinuities. The fillets caused global changes in the vortex-dominated surface pressure field that were effectively captured in the PSP measurements. The vortex surface pressure signatures were compared to available off-surface vortex cross-flow structures obtained using a laser vapor screen (LVS) flow visualization technique. The fillet effects on the PSP pressure distributions and the observed leading-edge vortex flow characteristics were consistent with the trends in the measured lift, drag, and pitching moment coefficients.

Erickson, Gary E.↗

Muon Capture in Nuclei: an Ab Initio Approach Based on Quantum Monte Carlo Methods

An ab initio quantum Monte Carlo method is introduced for calculating total rates of muon weak capture in light nuclei with mass number $A \leq 12$. As a first application of the method, we perform a calculation of the rate in $^4$He in a dynamical framework based on realistic two- and three-nucleon interactions and realistic nuclear charge-changing weak currents. The currents include one- and two-body terms induced by $\pi$- and $\rho$-meson exchange, and $N$-to-$\Delta$ excitation, and are constrained to reproduce the empirical value of the Gamow-Teller matrix element in tritium. We investigate the sensitivity of theoretical predictions to current parametrizations of the nucleon axial and induced pseudoscalar form factors as well as to two-body contributions in the weak currents. The large uncertainties in the measured values obtained from bubble-chamber experiments (carried out over 50 years ago) prevent us from drawing any definite conclusions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An Independent Measurement of the Total Active 8B Solar Neutrino Flux Using an Array of 3He Proportional Counters at the Sudbury Neutrino Observatory

The Sudbury Neutrino Observatory (SNO) used an array of {sup 3}He proportional counters to measure the rate of neutral-current interactions in heavy water and precisely determined the total active ({nu}{sub x}) {sup 8}B solar neutrino flux. This technique is independent of previous methods employed by SNO. The total flux is found to be 5.54{sub -0.31}{sup +0.33}(stat){sub -0.34}{sup +0.36}(syst) x 10{sup 6} cm{sup -2}s{sup -1}, in agreement with previous measurements and standard solar models. A global analysis of solar and reactor neutrino results yields {Delta}m{sup 2} = 7.94{sub -0.26}{sup +0.42} x 10{sup -5} eV{sup 2} and {theta} = 33.8{sub -1.3}{sup +1.4} degrees. The uncertainty on the mixing angle has been reduced from SNO's previous results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Long Fission Times of Super-Heavy Compound Nuclei

The blocking technique in single crystals is a direct method to investigate the presence of long fission time components. With a lead beam impinging on a germanium single crystal, we tried to produce compound nuclei (CN) with atomic number Z = 114 at high excitation energy. Blocking patterns for reaction products are reconstructed with position sensitive detectors at 20 deg. relative to the beam direction. The Z and the energies of all products are measured with {delta}E-E telescopes of the 4{pi} INDRA array, so that all reaction channels are unambiguously identified. With this setup, we can reach long fission times (>10{sup -18} s) that can be associated with CN fissions. However, in contrast to previous experiments in which such long fission times could be measured for Z = 120 and 124, no hint of long lifetimes within our sensitivity limit for Z = 114 was observed, which may be due to the neutron deficiency of the formed isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Method to convert biomass to 5-(hydroxymethyl)-furfural (HMF) and furfural using lactones, furans, and pyrans as solvents

Described is a process to produce hydroxymethyl furfural (HMF) from biomass-derived sugars. The process includes the steps of reacting a C5 and/or C6 sugar-containing reactant derived from biomass in a monophasic or biphasic reaction solution comprising water and a co-solvent. The co-solvent can be beta-, gamma-, and/or delta-lactones derived from biomass, tetrahydrofuran (THF) derived from biomass, and/or methyltetrahydrofuran (MTHF) derived from biomass. The reaction takes place in the presence of an acid catalyst and a dehydration catalyst for a time and under conditions such that at least a portion of glucose or fructose present in the reactant is converted to HMF.

60 APPLIED LIFE SCIENCES↗

An optimal, parallel, fully implicit Newton-Krylov solver for three-dimensional viscoresistive magnetohydrodynamics

The conceptual development and implementation of a scalable nonlinear solver for the time-dependent three-dimensional (3D) compressible resistive magnetohydrodynamics model (MHD) is discussed. The approach is based on Jacobian-free Newton-Krylov technology, preconditioned with multigrid methods for algorithmic scalability. The key to the approach is the reformulation of the hyperbolic MHD system into a parabolic one, which is amenable to multigrid techniques. Such reformulation (parabolization) aims to render the modified system block diagonally dominant (unlike the original MHD system, which is diagonally submissive for implicit time steps {delta}t larger than the explicit Courant-Friedrichs-Lewy time step). The algorithm has been tested on a variety of 2D and 3D configurations which demonstrate its excellent algorithmic scalability properties. In particular, it is shown that, serially, the CPU time for a given simulation scales linearly with the number of unknowns, and that large CPU gains ({approx}30) are attainable with respect to an explicit approach even for moderate grids (256x256). In parallel, the algorithm features excellent scalability properties up to thousands of processors (4096) and millions of unknowns ({approx}1.3x10{sup 8})

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic properties and magnetocaloric effect in Ho{sub 6-x}Er{sub x}MnBi{sub 2} compounds

Magnetic properties and magnetocaloric effect of compounds Ho{sub 6-x}Er{sub x}MnBi{sub 2} (x=0,3,6) are investigated experimentally. All the compounds crystallize in the hexagonal Zr{sub 6}CoAs{sub 2}-type structure and show a sharp drop in the magnetization around their respective magnetic ordering temperature, which is 201 K (x=0), 147 K (x=3), and 98 K (x=6), respectively. Either thermal or magnetic hysteresis around the phase transition is not observed, suggesting a second order phase transition nature. The magnetic entropy change ({Delta}S{sub m}) calculated from the Maxwell relation using the collected magnetization data is 10.6 (x=6), 7.3 (x=3), and 5.0 J kg{sup -1} K{sup -1} (x=0), respectively. The shape of the {Delta}S{sub m}-T curve has a good symmetry below and above the magnetic ordering temperature, and the value of the magnetic entropy change increases monotonously with increasing field change. The calorimetric technique has also been used for Er{sub 6}MnBi{sub 2} to check the credibility of the magnetic method.

36 MATERIALS SCIENCE↗

ASTEROSEISMOLOGICAL MODELING OF THE MULTIPERIODIC {lambda} BOOTIS STAR 29 CYGNI

The present work focuses on the discussion of the {lambda} Bootis nature of the multiperiodic {delta} Scuti star HD 192640 (29 Cyg), through a comprehensive asteroseismic modeling. Some of the most recent asteroseismic tools are used to check whether the observed low metallicity is internal, i.e., intrinsic, present throughout the star, or due to superficial processes as accretion, diffusive settling, radiative levitation, mass loss, etc. The modeling method uses some of the most recent tools, including: (1) effects of rotation on equilibrium models, on the adiabatic oscillation spectrum, and its influence in multicolor observables, (2) nonadiabatic stability of radial and nonradial modes, (3) inclusion of the atmosphere-pulsation interaction for a more accurate multicolor mode identification, and (4) ratio between radial modes n = 4 and n = 5 in the framework of Petersen diagrams. The analysis performed reveals that the models fulfilling all the constraints are those in the middle of the main sequence (MS), with subsolar metallicity, except some other unlikely possibilities. Therefore, this study does not support the idea of the {lambda} Bootis stars being zero-age MS or pre-MS stars interacting with their primordial cloud of gas and dust, but suggest the explanation of their nature as submetallic MS objects. Nevertheless, more accurate multicolor photometric observations are required for a more conclusive study using the procedure presented here, since the observational errors are too large for a definitive rejection of any of the possible explanations.

79 ASTRONOMY AND ASTROPHYSICS↗

The Local Topological Free Energy of the SARS-CoV-2 Spike Protein

The novel coronavirus SARS-CoV-2 infects human cells using a mechanism that involves binding and structural rearrangement of its Spike protein. Understanding protein rearrangement and identifying specific amino acids where mutations affect protein rearrangement has attracted much attention for drug development. In this manuscript, we use a mathematical method to characterize the local topology/geometry of the SARS-CoV-2 Spike protein backbone. Our results show that local conformational changes in the FP, HR1, and CH domains are associated with global conformational changes in the RBD domain. The SARS-CoV-2 variants analyzed in this manuscript (alpha, beta, gamma, delta Mink, G614, N501) show differences in the local conformations of the FP, HR1, and CH domains as well. Finally, most mutations of concern are either in or in the vicinity of high local topological free energy conformations, suggesting that high local topological free energy conformations could be targets for mutations with significant impact of protein function. Namely, the residues 484, 570, 614, 796, and 969, which are present in variants of concern and are targeted as important in protein function, are predicted as such from our model.

60 APPLIED LIFE SCIENCES↗

Subsonic vortex-flow design study for slender wings

A theoretical study describing the effects of spanwise camber on the lift dependent drag of slender delta wings having leading-edge-vortex-flow is presented. The earlier work by Barsby, using conical flow, indicated that drag levels similar to those in attached flow could be obtained. This is reexamined and then extended to the more practical case of nonconical flow by application of the vortex-lattice method coupled with the suction-analogy and the recently developed Boeing free-vortex-sheet method. Lastly, a design code is introduced which employs the suction analogy in an attempt to define 'optimum' camber surfaces for minimum lift dependent drag for vortex flow conditions

Lamar, J. E.↗