Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Temperature-dependent anisotropies of upper critical field and London penetration depth

In this work, we show on a few examples of one-band materials with spheroidal Fermi surfaces and anisotropic order parameters that anisotropies γ H of the upper critical field and γ λ of the London penetration depth depend on temperature, a feature commonly attributed to multiband superconductors. The parameters γ H and γ λ may have opposite temperature dependences or may change in the same direction depending on the Fermi-surface shape and on the character of the gap nodes. For two-band systems, the behavior of anisotropies is affected by the ratios of bands densities of states, Fermi velocities, anisotropies, and order parameters. Lastly, we investigate in detail the conditions determining the directions of temperature dependences of the two anisotropy factors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles predictions of temperature-dependent infrared dielectric function of polar materials by including four-phonon scattering and phonon frequency shift

Recently, first-principles calculations based on density functional theory have been widely used to predict the temperature-dependent infrared spectrum of polar materials, but the calculations are usually limited to the harmonic frequency (0 K) and three-phonon scattering damping for the zone-center infrared-active optical phonon modes, and fail to predict the high-temperature infrared optical properties of materials such as sapphire (α–Al 2 O 3 ), GaAs, TiO 2 , etc., due to the neglect of high-order phonon scattering damping and phonon frequency shift. In this work, we implemented first-principles calculations to predict the temperature-dependent infrared dielectric function of polar materials by including four-phonon scattering and phonon frequency shift. The temperature-dependent phonon damping by including three- and four-phonon scattering as well as the phonon frequency shift by including cubic and quartic anharmonicity and the thermal expansion effect are calculated based on anharmonic lattice dynamics method. The infrared dielectric function of α–Al 2 O 3 is parameterized, and then the temperature-dependent infrared optical reflectance is determined. We find that our predictions agree better with the experimental data than the previous density functional theory-based methods. Lastly, this work will help to effectively predict the thermal radiative properties of polar materials at elevated temperature, which is generally difficult to measure, and will enable predictive design of new materials for radiative applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonons, Q-dependent Kondo spin fluctuations, and 4f phonon resonance in YbAl 3

4f intermediate valence (IV) compounds are canonical hosts of correlated electron physics and can contribute to our understanding of the larger class of correlated electron materials. In this work, we study the prototype IV compound YbAl 3 which exhibits a nonintegral valence with a moderately heavy fermion ground state and a large Kondo temperature (T K ~500–600K). To better characterize the correlated physics of YbAl 3 , we have measured the phonon and the magnetic excitation spectra on single crystals of this material by time-of-flight inelastic neutron scattering and inelastic x-ray scattering. We have also performed theoretical calculations of the phonon spectra. We present three findings of these measurements. First, we observe that the measured phonon spectra can be described adequately by a calculation based on standard DFT+U density functional theory. The calculated energies, however, are 10% too low compared to the measured energies. This discrepancy may reflect a hardening of the phonons due to dynamic 4f correlations. Second, the low-temperature spin fluctuations on the Kondo energy scale k B T K have a momentum (Q) dependence similar to that seen recently in the IV compound CePd 3 . For that system, the Q dependence has been attributed to particle-hole excitations in a coherent itinerant 4f correlated ground state. We suggest a similar origin for the momentum dependence seen in YbAl 3 . This Q dependence disappears as the temperature is raised towards room temperature and the 4f electron band states become increasingly incoherent. Such a coherent/incoherent crossover is expected to be generic for correlated electron systems. Third, a low-temperature magnetic peak observed in the neutron scattering near 30 meV shows dispersion identical to a particular optic-phonon branch. This 4f/phonon resonance disappears for T≥150K. The phonon spectrum appears to be unaffected by the resonance. We discuss several possibilities for the origin of this unusual excitation, which may be unique to YbAl 3 . We suggest that the excitation may arise from the large amplitude beating of the light Al atoms against the heavy Yb atoms, resulting in a dynamic 4f/3p hybridization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependence of London penetration depth anisotropy in superconductors with anisotropic order parameters

Here, we study the effects of anisotropic order parameters on the temperature dependence of London penetration depth anisotropy γ λ ( T ) . After MgB 2 , this dependence is commonly attributed to distinct gaps on multiband Fermi surfaces in superconductors. We have found, however, that the anisotropy parameter may depend on temperature also in one-band materials with anisotropic order parameters Δ ( T , k F ) ; a few such examples are given. We have also found that for different order parameters, the temperature dependence of Δ ( T ) / Δ ( 0 ) can be represented with good accuracy by the interpolation suggested by Einzel, which simplifies considerably the evaluation of γ λ ( T ) . Of particular interest are mixed order parameters of two symmetries for which γ λ ( T ) may go through a maximum for a certain relative weight of two phases. Also, for this case we find that the ratio Δ max ( 0 ) / T c may exceed substantially the weak-coupling limit of 1.76. It, however, does not imply strong coupling; rather, it is due to significantly anisotropic angular variation of Δ .

36 MATERIALS SCIENCE↗

Temperature effects in spin-dependent Hall currents in an ideal skyrmion gas

The quest of novel reliable and fast performing logic and memory elements in classical and quantum computing requires discoveries of new effects in novel quantum materials. Skyrmions are such magnetic textures where electron scattering can essentially change the shape and location of the skyrmion, which can be used as a memory element being more efficient than domain walls as memory device in classical computing. Because the skyrmion motion is sensitive even to very small currents, we study electron scattering by skyrmions in an ideal skyrmion gas in ferromagnetic environment. In such systems, the direct and Hall currents become spin-dependent. For applications it is important to consider a Hall effect in the whole range of temperatures under the assumption of the skyrmion existence. In this study we find the nonmonotonic temperature dependence of the direct spin-up conductivity, i. e., the conductivity for the current directed along the applied electric field due to the electrons with the spin parallel to the ferromagnetic moment. Such a behavior contradicts the traditional understanding where the temperature only increases the value of the conductivity. The spin-down Hall conductivity is found to be even more dramatic exhibiting the conductivity sign change (i.e., the change in the current direction) with temperature for small skyrmion sizes. The found effects strongly depend on Fermi energy. The most pronounced dependencies take place if the Fermi energy is slightly below and above the bottom of the upper (spin-down) energy band of an ideal 2D electron gas. In addition, we also find that the direct and Hall resistivities, ρ xx and ρ xy , are independent of the exchange integral J for 2J > ε F .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-dependent orbital-free density functional theory: Background and Pauli kernel approximations

Time-dependent orbital-free density functional theory (DFT) is an efficient method for calculating the dynamic properties of large-scale quantum systems due to the low computational cost compared to standard time-dependent DFT. In this work, we formalize this method by mapping the real system of interacting fermions onto a fictitious system of noninteracting bosons. The dynamic Pauli potential and associated kernel emerge as key ingredients of time-dependent orbital-free DFT. Using the uniform electron gas as a model system, we derive an approximate frequency-dependent Pauli kernel. Pilot calculations suggest that space nonlocality is a key feature for this kernel. Nonlocal terms arise already in the second-order expansion with respect to unitless frequency and reciprocal space variable ($\frac{ω}{qk_F}$ and $\frac{q}{2k_F}$, respectively). Given the encouraging performance of the proposed kernel, we expect it will lead to more accurate orbital-free DFT simulations of nanoscale systems out of equilibrium. Additionally, the proposed path to formulate nonadiabatic Pauli kernels presents several avenues for further improvements which can be exploited in future work to improve the results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological alloy engineering and locally linearized gap dependence on concentration

Alloy engineering is a well-established approach to tune various materials’ properties, but its application to topological alloys remains rudimentary. Of special interest is the band gap, the most defining property of topological materials; however, the concentration dependence of energy gaps in topological alloys remains unknown. Here we systematically investigate the band gap evolution of a topological alloy as a function of alloy concentration, using KZnSb 1-x Bi x as a prototype, based on first-principles calculations. In contrast to the well-established smooth bowing curve for a trivial gap in semiconductor alloys, we found that the topological gap evolves generally with a complex fragmented pattern due to topological phase transitions, and most strikingly a linear dependence on concentration locally in each distinct phase. Such gap linearization is fundamentally rooted in the linear dependence on alloy concentration of spin-orbit coupling (SOC) that predominantly determines a topological gap. Furthermore, we demonstrate topological alloy engineering as a general approach to tune the topological order by modulating the band edge composition and degeneracy through the alloying-induced interplay of SOC and atomic orbital on-site energy, while the linear gap dependence on alloy concentration remains independent of the degree of topological order.

36 MATERIALS SCIENCE↗

Anisotropic H c 2 , thermodynamic and transport measurements, and pressure dependence of T c in K 2 Cr 3 As 3 single crystals

We present a detailed study of single crystalline K 2 Cr 3 As 3 and analyze its thermodynamic and transport properties, anisotropic H c2 (T), and initial pressure dependence of T c . In zero field, the temperature-dependent resistivity is metallic. Deviation from a linear temperature dependence is evident below 100 K and a T 3 dependence is roughly followed from just above T c (~10K) to ~40K. Anisotropic H c2 (T) data were measured up to 140 kOe with field applied along and perpendicular to the rodlike crystals. For the applied field perpendicular to the rod, H c2 (T) is linear with a slope ~–70 kOe/K. For field applied along the rod, the slope is about –120 kOe/K below 70 kOe. Above 70 kOe, the magnitude of the slope decreases to ~–70 kOe/K. The electronic specific heat coefficient γ, just above T c , is 73 mJ/mol K 2 ; the Debye temperature Θ D is 220 K. As a result, the specific heat jump at the superconducting transition ΔC~2.2γT c . Finally, for hydrostatic pressures up to ~7 kbar, T c decreases under pressure linearly at a rate of –0.034K/kbar.

36 MATERIALS SCIENCE↗

Strength and deformation of shocked diamond single crystals: Orientation dependence

Understanding and quantifying the strength or elastic limit of diamond single crystals is of considerable scientific and technological importance, and has been a subject of long standing theoretical and experimental interest. To examine the effect of crystalline anisotropy on strength and deformation of shocked diamond single crystals, plate impact experiments were conducted to measure wave profiles at various elastic impact stresses up to ~120 GPa along [110] and [111] crystal orientations. Using laser interferometry, particle velocity histories and shock velocities in the diamond samples were measured and were compared with similar measurements published previously for shock compression along the [100] direction. Wave profiles for all three orientations showed large elastic wave amplitudes followed by time-dependent inelastic deformation. From the measured wave profiles, the elastic limits were determined under well characterized uniaxial strain loading conditions. The measured elastic wave amplitudes for the [110] and [111] orientations were lower for higher elastic impact stress (stress attained for an elastic diamond response), consistent with the result reported previously for [100] diamond. The maximum resolved shear stress (MRSS) on the {111}<110> slip systems was determined for each orientation, revealing significant orientation dependence. The MRSS values for the [100] and [110] orientations (~33 GPa) are 25-30% of theoretical estimates; the MRSS value for the [111] orientation is significantly lower (~23 GPa). Our results demonstrate that the MRSS depends strongly on the stress component normal to the {111} planes or the resolved normal stress (RNS), suggesting that the RNS plays a key role in inhibiting the onset of inelastic deformation. Lower elastic wave amplitudes at higher peak stress and the effect of the RNS are inconsistent with typical dislocation slip mechanisms of inelastic deformation, suggesting instead an inelastic response characteristic of shocked brittle solids. The present results show that the elastic limit (or material strength) of diamond single crystals cannot be described using traditional isotropic approaches, and typical plasticity models cannot be used to describe the inelastic deformation of diamond. Analysis of the measured wave profiles beyond the elastic limit, including characterization of the peak state, requires numerical simulations that incorporate a time-dependent, anisotropic, inelastic deformation response. Development of such a material description for diamond is an important need.

36 MATERIALS SCIENCE↗

Probing the neutron-proton asymmetry dependence of the nuclear source temperature with light charged particles

The dependence of the nuclear temperature on the source neutron-proton (N/Z) asymmetry was experimentally investigated with the light charged particles (LCPs) generated from thirteen reaction systems with different N/Z asymmetries, 64 Zn on 112 Sn and 70 Zn, 64 Ni on 112,124 Sn, 58,64 Ni, 197 Au, 232 Th at 40 MeV/u. A rather weak N/Z asymmetry dependence of the source temperature was qualitatively inferred from the extracted N/Z asymmetry dependence of the apparent temperature and that of the relative temperature change by the sequential decay effects with the help of the theoretical simulations. Comparing the present result with those from our previous work and other available experimental results, a weak N/Z asymmetry dependence of nuclear temperature is commonly observed in different independent experiments and with different thermometers, except for the result reported by McIntosh et al. [Phys. Lett. B 719, 337 (2013)]. Here, the origin of the difference between the conclusion of the former group and that of McIntosh et al. was addressed, using statistical multifragmentation model (SMM) simulations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sensitivity of time-dependent density functional theory to initial conditions

Time-dependent density-functional theory is mathematically formulated through nonlinear coupled time-dependent three-dimensional partial differential equations, and it is natural to expect a strong sensitivity of its solutions to variations of the initial conditions, akin to the butterfly effect ubiquitous in classical dynamics. Since the Schrödinger equation for an interacting many-body system is, however, linear and mathematically the exact equations of the density-functional theory reproduce the corresponding one-body properties, it would follow that the Lyapunov exponents are also vanishing within a density-functional theory framework. Whether for realistic implementations of the time-dependent density-functional theory the question of the absence of the butterfly effect and whether the dynamics provided is indeed a predictable theory was never discussed. At the same time, since the time-dependent density-functional theory is a unique tool allowing us to study the nonequilibrium dynamics of strongly interacting many-fermion systems, the question of predictability of this theoretical framework is of paramount importance. Here our analysis, for a number of quantum superfluid many-body systems (unitary Fermi gas, nuclear fission, and heavy-ion collisions) with a classical equivalent number of degrees of freedom O(10 10 ) and larger, suggests that its maximum Lyapunov exponents are negligible for all practical purposes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Energy dependence of $\textit{p}$ + 232 Th fission mass distributions: Mass-asymmetric standard I and standard II modes, and multichance fission

Background: The predominant mass-asymmetric fission of actinide nuclides occurs mainly through the so-called standard I and standard II modes. Though understood to be caused by shape-dependent shell structures encountered between the fission barrier deformation and scission, the most relevant shell gaps are still not firmly established. The standard I mode had been associated with the spherical doubly magic 132 Sn, and thus the $\textit{Z}$ = 50 proton shell, but recently it has been proposed that standard I and standard II are associated with quadrupole and octupole deformed gaps at $\textit{Z}$ = 52 and 56, respectively. Purpose: In this work, we investigate how the relative probabilities of the standard I and standard II modes vary with excitation energy near threshold, probing where the two modes bifurcate. Methods: The Australian National University Heavy Ion Accelerator Facility and CUBE fission spectrometer have been used to measure fission mass distributions for the $\textit{p}$ + 232 Th reaction (forming 233 Pa) at closely spaced bombarding energy intervals from 6.5 to 28 MeV. Results: A model-independent analysis of the energy dependence of the shape of the mass-asymmetric peak shows a strong dependence of the standard I and standard II relative probability on excitation energy near threshold. Conclusions: The results are consistent with the standard II mode having a lower fission barrier than standard I in 233 Pa, with the latter increasing continually in relative probability above its barrier energy. It is concluded that multichance fission, in particular last chance fission, plays a strong role in determining the observed energy dependence of all fission modes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Medium mass fragment production due to momentum dependent interactions

The role of system size and momentum dependent effects are analyzed in multifragmenation by simulating symmetric reactions of Ca+Ca, Ni+Ni, Nb+Nb, Xe+Xe, Er+Er, Au+Au, and U+U at incident energies between 50 MeV/nucleon and 1000 MeV/nucleon and over full impact parameter zones. Our detailed study reveals that there exists a system size dependence when the reaction is simulated with momentum dependent interactions. This dependence exhibits a mass power law behavior.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Relationship between the azimuthal dependencies of nuclear modification factor and ridge yield

The azimuthal angular dependence of the nuclear modification factor R{sub AA}(p{sub T},phi,N{sub part}) recently obtained by PHENIX is related at low p{sub T} to the trigger phi dependence of the ridge yield as measured by STAR in a framework in which the azimuthal anisotropy is driven by semihard scattering near the surface. Careful consideration of the initial geometry leads to the determination of a surface segment in which the production of semihard partons are responsible for the phi dependence of the inclusive distribution on the one hand and for the angular correlation in ridge phenomenology on the other. With v{sub 2} also being well reproduced along with R{sub AA} and ridge yield, all relevant phi dependencies in heavy-ion collisions can now be understood in a unified description that emphasizes the ridge production whether or not a trigger is used.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of the momentum dependence of the nuclear symmetry potential on the {pi}{sup -}/{pi}{sup +} ratio in heavy-ion collisions

In the framework of the isospin-dependent Boltzmann-Uehling-Uhlenbeck transport model, the effect of the momentum dependence of the nuclear symmetry potential on the {pi}{sup -}/{pi}{sup +} ratio in the neutron-rich reaction {sup 132}Sn +{sup 124}Sn at a beam energy of 400 MeV/nucleon is studied. We find that the momentum dependence of the nuclear symmetry potential affects the compressed density of colliding nuclei, the numbers of produced {pi}{sup -} and {pi}{sup +}, as well as the value of the {pi}{sup -}/{pi}{sup +} ratio. The momentum-dependent nuclear symmetry potential increases the compressed density of colliding nuclei, the number of produced resonances {Delta}(1232), N{sup *}(1440), {pi}{sup -}, and {pi}{sup +}, as well as the value of the {pi}{sup -}/{pi}{sup +} ratio.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Angular distribution of gamma-ray emission from velocity-dependent dark matter annihilation in subhalos

We consider the effect of velocity-dependent dark matter annihilation on the angular distribution of gamma rays produced in dark matter subhalos. We assume that the dark matter potential is spherically symmetric, characterized by a scale radius and scale density, and the velocity distribution is isotropic. We find that the effect of velocity-dependent dark matter annihilation is largely determined by dimensional analysis; the angular size of gamma-ray emission from an individual subhalo is rescaled by a factor which depends on the form of the dark matter distribution, but not on the halo parameters, while the relative normalization of the gamma-ray flux from different mass subhalos is rescaled by a factor which depends on the halo parameters, but not on the form of the dark matter distribution. We apply our results to a Navarro-Frenk-White profile for the case of an individual subhalo and comment on the application of these results to a distribution of subhalos.

79 ASTRONOMY AND ASTROPHYSICS↗

Position-dependent matter density probability distribution function

Here, we introduce the position-dependent probability distribution function (PDF) of the smoothed matter field as a cosmological observable. In comparison to the PDF itself, the spatial variation of the position-dependent PDF is simpler to model and has distinct dependence on cosmological parameters. We demonstrate that the position-dependent PDF is characterized by variations in the local mean density, and we compute the linear response of the PDF to the local density using separate universe N-body simulations. The linear response of the PDF to the local density field can be thought of as the linear bias of regions of the matter field selected based on density. We provide a model for the linear response, which accurately predicts our simulation measurements. We also validate our results and test the separate universe consistency relation for the local PDF using global universe simulations. We find excellent agreement between the two, and we demonstrate that the separate universe method gives a lower variance determination of the linear response.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Position-dependent Voronoi probability distribution functions for matter and halos

Here, we measure the Voronoi density probability distribution function (PDF) for both dark matter and halos in N-body simulations. For the dark matter, Voronoi densities represent the matter density field smoothed on a uniform mass scale, which approximates the Lagrangian density field. For halos, the Voronoi densities contain information about the local environment of each halo. We measure the halo virial masses, the total amount of dark matter within each halo Voronoi cell, and the halo Voronoi cell volumes, and we show how halo abundances depend on these three quantities. We then study the position-dependent Voronoi density PDF, measured within finite subregions of the Universe, using separate universe simulations. We demonstrate that the spatial variation of the position-dependent PDF is due to large-scale density fluctuations, indicating that the position-dependent PDF is a biased tracer of large-scale structure. We measure this bias for the dark matter, and interpret it as the bias of regions of the Lagrangian density field that are selected based on density. For the halos, this bias can be interpreted as a form of assembly bias. We present the mapping from late-time to early-time Voronoi density for each simulation dark matter particle, which is highly stochastic. We compare the median of this stochastic map with spherical collapse calculations and discuss challenges involved in modeling the evolution of the density field on these scales.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗