Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffuser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Diffusion and Solvation Dynamics of Ions in Water: Beyond the Brownian Approximation

The coupled dynamics of ions and water molecules in their first hydration shell impact a variety of processes including ion diffusion, selective ion transport in water-filled nanopores, and the kinetics of ion-pairing, ion adsorption, and metal-ligand binding reactions. In this work, we study these coupled dynamics for alkali metals (Li, Na, K, Rb, Cs), alkaline Earth metals (Mg, Ca, Sr, Ba), and chloride through the lens of their dependence on ion isotopic mass. Results are validated against previous measurements of the isotopic mass-dependence of ion diffusion coefficients in water and previous ab initio calculations of ion high-frequency dynamics in water. We find that the vibrational power spectra of ions in water consistently exhibit either two or three peaks, i.e., ions have several rattling frequencies within their solvations shells as previously reported for a subset of the species examined here. These frequencies have different sensititivies to isotopic mass that may serve as signatures of ion solvation processes (such as the tendency of ions to orient their first-shell water molecules) and that also may relate to Hofmeister-like effects including the relative affinity of different metals for ribonucleic acid (RNA).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Assessment of Numerical Diffusion in NRELAP5 Code for Density Wave Oscillations Applications

Density wave oscillation (DWO) in a boiling channel can be a delicate phenomenon, and the precision of numerical tools can influence predictions. In this paper, relevant numerical diffusion was analyzed for the finite difference schemes used in the NRELAP5 code. The numerical diffusion in NRELAP5 was investigated under both single-phase and two-phase conditions. A unique perturbation technique called the “V” ramping approach was introduced, and the NRELAP5-predicted DWO results were then compared to test data.

Numerical diffusion, NRELAP5, RELAP5-3D, density w↗
DOE OSTI2019

Novel Radiometry for In-Pipe Robotic Inspection of Holdup Deposits in Gaseous Diffusion Piping - 19503

This paper details the first complete, DOE approved, deployed and operational radiometry for robotic nondestructive assay (NDA) of holdup deposits in gaseous diffusion piping. Some features, like peak-finding, Compton correction, detector efficiency, and material properties are characteristic of typical manual methods. Most features are specific to in-pipe robotic deployment. These include in-motion radiometry, self-determined location, geometric modeling of thick deposits, bounding of self-attenuation thickness and auto-checking of replicate measurements. Significant are the means for determining all the properties, equations, and constants for automatically computing and displaying all the quantities, uncertainties and information needed for NDA reporting, analysis, and review. Earlier work by this team demonstrated rudimentary but convincing robotic in-pipe NDA of holdup deposits in pipes. Cold testing with high-enrichment mat sources and hot tests with low U-235 loadings together succeeded to exhibit convincing proof-of-principle. This research-grade radiometry implementation lacked accurate odometry, efficiency calibration, high-fidelity detector modeling, attenuation modeling, forward geometric modeling, auto-segmenting, uncertainty modeling, replicate checking, deconvolution and much more. This work explains the technical basis behind robotic in-pipe NDA. It includes discussion of a new method for modeling of self-attenuation using in-pipe deposit geometry information, detail of the method's total measurement uncertainty, and explanation of calibration methods and results. Beyond development of automation-specific radiometric elements, the paper highlights analyses, testing, and technical bases specific to and supportive of the methodology. Examples include collimation characterization, detector efficiency determination, auto-calibration methodology, and odometric replicate-checking. Results of this methodology are formalized in a DOE EM Technical Basis Document, implemented in software, formally verified in review and acceptance testing and proceduralized as a means for D and D NDA at the Portsmouth enrichment facility. Measurement of U-235 quantity is a well-known cost and schedule driver in D and D of every defunct gaseous diffusion enrichment facility in the world. The radiometry methodologies and results detailed in this paper were the high hurdles. Having established the technical basis for this automated NDA, the opportunity is to apply this to many sizes and robot forms for addressing holdup deposit NDA throughout the D and D community. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

A Robot for Nondestructive Assay of Holdup Deposits in Gaseous Diffusion Piping - 19504

Miles of contaminated pipe must be characterized as part of the decommissioning effort at deactivated gaseous diffusion enrichment facilities. The current method requires cutting away asbestos- lined thermal enclosures and performing repeated, elevated operations to manually perform nondestructive assay (NDA) on pipe from the outside. The RadPiper robot, part of the Pipe Crawling Activity Measurement System (PCAMS) developed by Carnegie Mellon University and commissioned for use at the DOE Portsmouth Gaseous Diffusion Enrichment Facility, automatically measures U-235 in pipes from the inside. This improves certainty, increases safety, and greatly reduces measurement time. The heart of the RadPiper robot is a sodium iodide scintillation detector in an innovative disc-collimated assembly. By measuring from inside pipes, the robot significantly increases its count rate relative to external through-pipe measurements. The robot also provides imagery, models interior pipe geometry, and precisely measures distance in order to localize radiation measurements. Data collected by this system provides insight into pipe interiors that is simply not possible from exterior measurements, all while keeping operators safer. This paper describes the technical details of the PCAMS RadPiper robot. Key features for this robot include precision distance measurement, in-pipe obstacle detection, ability to transform for two pipe sizes, and robustness in autonomous operation. Test results demonstrating the robot's functionality are presented, including deployment tolerance tests, safeguarding tests, and localization tests. Integrated robot tests are also shown. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Diffusion bonded compact heat exchanger in Inconel 740H for high temperature and high-pressure applications

It is desired to develop heat exchangers able to be operated at high temperatures (750˚C) and pressures (3636 psi) for use in advanced Brayton power cycle. Conventional materials have not had the high strength at temperature required for these applications previously, however a fairly new material Inconel 740H developed by Special Metals for the ultra-supercritical water fossil industry has shown good performance under these conditions. In further efforts to capitalize on these new high strength high temperature alloys CompRex has developed a diffusion bonding procedure capable of alloying compact high effectiveness heat exchangers that can perform under these high temperature and high-pressure conditions. Initial tests of the heat exchanger are being conducted at the University of Wisconsin using supercritical CO2 working fluid. The bonding process has been adjusted such that the strength of the bonded block has achieved over 90% yield and tensile strength of the 740H base material values. Grain size before and after bonding were measured to determine the extent of grain growth and grain diffusion across the interface. A discussion of the heat exchanger design, etching and initial tensile tests on sample bonds will be discussed.

14 SOLAR ENERGY↗
DOE OSTI2017

Regulating Top-Surface Multilayer/Single-Crystal Graphene Growth by “Gettering” Carbon Diffusion at Backside of the Copper Foil

A unique strategy is reported to constrain the nucleation centers for multilayer graphene (MLG) and, later, single-crystal graphene domains by gettering carbon source on backside of the flat Cu foil, during chemical vapor deposition. Hitherto, for a flat Cu foil, the top-surface-based growth mechanism is emphasized, while overlooking the graphene on the backside. However, the systematic experimental findings indicate a strong correlation between the backside graphene and the nucleation centers on the top-surface, governed by the carbon diffusion through the bulk Cu. This understanding steers to devise a strategy to mitigate the carbon diffusion to the top-surface by using a carbon “getter” substrate, such as nickel, on the backside of the Cu foil. Depth profiling of the nickel substrate, along with the density functional theory calculations, verifies the gettering role of the nickel support. The implementation of the backside carbon gettering approach on single-crystal graphene growth results in lowering the nucleation density by two orders of magnitude. This enables the single-crystal domains to grow by 6 mm laterally on the untreated Cu foil. Finally, the growth of large-area polycrystalline single layer graphene, free of unwanted MLG domains, with significantly improved field-effect mobility of ≈6800 cm 2 V -1 s -1 is demonstrated.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Carbon Incorporation and Anion Dynamics as Synergistic Drivers for Ultrafast Diffusion in Superionic LiCB 11 H 12 and NaCB 11 H 12

The disordered phases ofLiCB 11 H 12 and NaCB 11 H 12 possess superb superionic conductivities that make them suitable as solid electrolytes. In these materials, cation diffusion correlates with high orientational mobilities of the CB 11 H 12 - anions; however, the precise relationship has yet to be demonstrated. In this work, ab initio molecular dynamics and quasielastic neutron scattering are combined to probe anion reorientations and their mechanistic connection to cation mobility over a range of timescales and temperatures. It is found that anions do not rotate freely, but rather transition rapidly between orientations defined by the cation sublattice symmetry. The symmetry-breaking carbon atom in CB 11 H 12 - also plays a critical role by perturbing the energy landscape along the instantaneous orientation of the anion dipole, which couples fluctuations in the cation probability density directly to the anion motion. Anion reorientation rates exceed 3 x 10 10 s -1 , suggesting the underlying energy landscape fluctuates dynamically on diffusion-relevant timescales. Furthermore, carbon is found to modify the orientational preferences of the anions and aid rotational mobility, creating additional symmetry incompatibilities that inhibit ordering. The results suggest that synergy between the anion reorientational dynamics and the carbon-modified cation-anion interaction accounts for the higher ionic conductivity in CB 11 H 12 - salts compared with B 12 H 12 2- .

36 MATERIALS SCIENCE↗
DOE OSTI2019

Surface Engineering of 3D Gas Diffusion Electrodes for High‐Performance H 2 Production with Nonprecious Metal Catalysts

Abstract In this work, a methodology is demonstrated to engineer gas diffusion electrodes for nonprecious metal catalysts. Highly active transition metal phosphides are prepared on carbon‐based gas diffusion electrodes with low catalyst loadings by modifying the O/C ratio at the surface of the electrode. These nonprecious metal catalysts yield extraordinary performance as measured by low overpotentials (51 mV at −10 mA cm −2 ), unprecedented mass activities (>800 A g −1 at 100 mV overpotential), high turnover frequencies (6.96 H 2 s −1 at 100 mV overpotential), and high durability for a precious metal‐free catalyst in acidic media. It is found that a high O/C ratio induces a more hydrophilic surface directly impacting the morphology of the CoP catalyst. The improved hydrophilicity, stemming from introduced oxyl groups on the carbon electrode, creates an electrode surface that yields a well‐distributed growth of cobalt electrodeposits and thus a well‐dispersed catalyst layer with high surface area upon phosphidation. This report demonstrates the high‐performance achievable by CoP at low loadings which facilitates further cost reduction, an important part of enabling the large‐scale commercialization of non‐platinum group metal catalysts. The fabrication strategies described herein offer a pathway to lower catalyst loading while achieving high efficiency and promising stability on a 3D electrode.

Sanchez, Joel↗
DOE OSTI2021

Incorporating Electrochemical Halide Oxidation into Drift-Diffusion Models to Explain Performance Losses in Perovskite Solar Cells under Prolonged Reverse Bias

Partial shading of a solar module can induce a set of cells within the module to operate under reverse bias. Studies have shown that metal halide perovskite solar cells with a wide variety of compositions and contacts exhibit interesting behavior in reverse bias that includes both reversible performance loss and non-reversible degradation. In this paper, an advanced drift-diffusion approach incorporating an electrochemical term to explain the short-circuit, open circuit and fill factor losses that are experimentally measured after prolonged reverse bias is used. It is shown that holes can tunnel into the perovskite due to sharp band bending near the contact, accumulate within the bulk of the perovskite absorber, and trigger the oxidation of halides to form neutral halogens. The density of neutral halogens is much higher in reverse bias because there are hardly any electrons available to reduce the iodine. The resulting halogens act as bulk recombination centers. While the interstitial halogen density does decay when the cell is operated in forward bias, permanent degradation can occur if the iodine diffuses out of the perovskite layer. Finally, the ways in which changing parameters such as the mobile ion density or the series resistance at the contact can influence device performance and stability are discussed.

degradation↗
DOE OSTI2023

Cation Disordered Anti-Perovskite Cathode Materials with Enhanced Lithium Diffusion and Suppressed Phase Transition

Recently, a new family of anti-perovskite Li 2 TMSO was discovered as promising cathode materials for Li-ion batteries (LIBs) with superiorities in high specific capacity, low cost, and environmental friendliness. However, the applications of these anti-perovskite materials meet severe challenges in the cyclability and rate performance. In this work, a cation-disordered anti-perovskite type solid solution Li 2 Fe 1– x Mn x SO (LFMSO, x = 0, 0.2, 0.5) with excellent electrochemical performance is reported. On the basis of comprehensive structural characterizations, the role of the cation disordering in LFMSO is clarified. In comparison with Li 2 FeSO (LFSO), the reduced Li-ion diffusion barrier and the increased Li-rich octahedral configurations in LFMSO with higher configurational entropy imply the facilitated long-range Li-ion diffusion and the suppressed phase transition, which favor the high-rate capability and cycling stability. In addition, the large lattice distortion and Coulombic interaction between the anions and cations lead to the breathing of the unit cell during charge/discharge. The variation of the unit cell volume decreases to 2.5% upon Li-ion delithiation. A superstructure is observed in LFMSO for the first time. These findings help to pave the way for the research and development of novel cathode materials for the next generation LIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

DNA Reaction–Diffusion Attractor Patterns

Abstract Living systems can form and recover complex chemical patterns with precisely sized features in the ranges of tens or hundreds of microns. We show how designed reaction–diffusion processes can likewise produce precise patterns, termed attractor patterns, that reform their precise shape after being perturbed. We use oligonucleotide reaction networks, photolithography, and microfluidic delivery to form precisely controlled attractor patterns and study the responses of these patterns to different localized perturbations. Linear and “hill”‐shaped patterns formed and stabilized into shapes and at time scales consistent with reaction–diffusion models. When patterns were perturbed in particular locations with UV light, they reliably reformed their steady‐state profiles. Recovery also occurred after repeated perturbations. By designing the far‐from‐equilibrium dynamics of a chemical system, this study shows how it is possible to design spatial patterns of molecules that are sustained and regenerated by continually evolving towards a specific steady state configuration.

Dorsey, Phillip James↗
DOE OSTI2021

Heavily Tungsten–Doped Sodium Thioantimonate Solid–State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion

A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. Here, the 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

DNA Reaction–Diffusion Attractor Patterns

Living systems can form and recover complex chemical patterns with precisely sized features in the ranges of tens or hundreds of microns. We show how designed reaction-diffusion processes can likewise produce precise patterns, termed attractor patterns, that reform their precise shape after being perturbed. We use oligonucleotide reaction networks, photolithography and microfluidic delivery to form precisely controlled attractor patterns and study the responses of these patterns to different localized perturbations. Linear and ‘hill’-shaped patterns formed and stabilized into shapes and at time scales consistent with reaction-diffusion models. When patterns were perturbed in particular locations with UV light, they reliably reformed their steady state profiles. Recovery also occurred after repeated perturbations. As a result, by designing the far-from-equilibrium dynamics of a chemical system, this study shows how it is possible to design spatial patterns of molecules that are sustained and regenerated by continually evolving towards a specific steady state configuration

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Heavily Tungsten-Doped Sodium Thioantimonate Solid-State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion

A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. The 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Here, calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .

sodium metal battery (SMB)↗
DOE OSTI2024

Synthesizing realistic sand assemblies with denoising diffusion in latent space

Abstract The shapes and morphological features of grains in sand assemblies have far‐reaching implications in many engineering applications, such as geotechnical engineering, computer animations, petroleum engineering, and concentrated solar power. Yet, our understanding of the influence of grain geometries on macroscopic response is often only qualitative, due to the limited availability of high‐quality 3D grain geometry data. In this paper, we introduce a denoising diffusion algorithm that uses a set of point clouds collected from the surface of individual sand grains to generate grains in the latent space. By employing a point cloud autoencoder, the three‐dimensional point cloud structures of sand grains are first encoded into a lower‐dimensional latent space. A generative denoising diffusion probabilistic model is trained to produce synthetic sand that maximizes the log‐likelihood of the generated samples belonging to the original data distribution measured by a Kullback‐Leibler divergence. Numerical experiments suggest that the proposed method is capable of generating realistic grains with morphology, shapes and sizes consistent with the training data inferred from an F50 sand database. We then use a rigid contact dynamic simulator to pour the synthetic sand in a confined volume to form granular assemblies in a static equilibrium state with targeted distribution properties. To ensure third‐party validation, 50,000 synthetic sand grains and the 1542 real synchrotron microcomputed tomography (SMT) scans of the F50 sand, as well as the granular assemblies composed of synthetic sand grains are made available in an open‐source repository.

Vlassis, Nikolaos N.↗
DOE OSTI2017

Morse-Smale Analysis of Ion Diffusion in Ab Initio Battery Materials Simulations

Ab initio molecular dynamics (AIMD) simulations are increasingly useful in modeling, optimizing and synthesizing materials in energy sciences. In solving Schrödinger’s equation, they generate the electronic structure of the simulated atoms as a scalar field. However, methods for analyzing these volume data are not yet common in molecular visualization. The Morse-Smale complex is a proven, versatile tool for topological analysis of scalar fields. In this paper, we apply the discrete Morse-Smale complex to analysis of first-principles battery materials simulations. We consider a carbon nanosphere structure used in battery materials research, and employ Morse-Smale decomposition to determine the possible lithium ion diffusion paths within that structure. Our approach is novel in that it uses the wavefunction itself as opposed distance fields, and that we analyze the 1-skeleton of the Morse-Smale complex to reconstruct our diffusion paths. Furthermore, it is the first application where specific motifs in the graph structure of the complete 1-skeleton define features, namely carbon rings with specific valence. We compare our analysis of DFT data with that of a distance field approximation, and discuss implications on larger classical molecular dynamics simulations.

25 ENERGY STORAGE↗
DOE OSTI2021

Multiplicative noise and the diffusion of conserved densities

Stochastic fluid dynamics governs the long time tails of hydrodynamic correlation functions, and the critical slowing down of relaxation phenomena in the vicinity of a critical point in the phase diagram. In this work we study the role of multiplicative noise in stochastic fluid dynamics. Multiplicative noise arises from the dependence of transport coefficients, such as the diffusion constants for charge and momentum, on fluctuating hydrodynamic variables. We study long time tails and relaxation in the diffusion of a conserved density (model B), and a conserved density coupled to the transverse momentum density (model H). Careful attention is paid to fluctuation-dissipation relations. We observe that multiplicative noise contributes at the same order as non-linear interactions in model B, but is a higher order correction to the relaxation of a scalar density and the tail of the stress tensor correlation function in model H.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

An effective description of charge diffusion and energy transport in a charged plasma from holography

We discuss the physics of sound propagation and charge diffusion in a plasma with non-vanishing charge density. Our analysis culminates the program initiated in to construct an open effective field theory of low-lying modes of the stress tensor and charge current in such plasmas. We model the plasma holographically as a Reissner-Nordström-AdS d+1 black hole, and study linearized fluctuations of longitudinally polarized scalar gravitons and photons in this background. We demonstrate that the perturbations can be decoupled and repackaged into the dynamics of two designer scalars, whose gravitational coupling is modulated by a non-trivial dilatonic factor. The holographic analysis allows us to isolate the phonon mode from the charge diffusion mode, and identify the combination of currents that corresponds to each of them. We use these results to obtain the real-time Gaussian effective action, which includes both the retarded response and the associated stochastic (Hawking) fluctuations, accurate to quartic order in gradients.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗