Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed parallelization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Millimeter wave scattering and diffraction in 110 GHz air breakdown plasma

We present measurements of the scattering, reflection, absorption, and transmission of a 1.5 MW, 110 GHz quasioptical gyrotron beam by a self-induced air breakdown plasma. The breakdown forms a periodic array of plasma filaments, oriented parallel to the incident electric field polarization that propagates toward the microwave source. For incident intensity of 3 MW/cm{sup 2}, calorimetric measurements show that as much as 45% of the full beam power is absorbed by the plasma, averaged over the pulse, 1% is reflected backward, and the remainder is transmitted and also scattered into a wide angular spread. We observe that approximately 10 times more power is scattered in the direction perpendicular to the filaments than parallel. The far-field angular distribution of transmitted power exhibits a diffraction pattern that changes throughout the 2-{mu}s life of the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiscale modeling of polyisoprene on graphite

The local dynamics and the conformational properties of polyisoprene next to a smooth graphite surface constructed by graphene layers are studied by a multiscale methodology. First, fully atomistic molecular dynamics simulations of oligomers next to the surface are performed. Subsequently, Monte Carlo simulations of a systematically derived coarse-grained model generate numerous uncorrelated structures for polymer systems. A new reverse backmapping strategy is presented that reintroduces atomistic detail. Finally, multiple extensive fully atomistic simulations with large systems of long macromolecules are employed to examine local dynamics in proximity to graphite. Polyisoprene repeat units arrange close to a parallel configuration with chains exhibiting a distribution of contact lengths. Efficient Monte Carlo algorithms with the coarse-grain model are capable of sampling these distributions for any molecular weight in quantitative agreement with predictions from atomistic models. Furthermore, molecular dynamics simulations with well-equilibrated systems at all length-scales support an increased dynamic heterogeneity that is emerging from both intermolecular interactions with the flat surface and intramolecular cooperativity. This study provides a detailed comprehensive picture of polyisoprene on a flat surface and consists of an effort to characterize such systems in atomistic detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time-dependent second-order Born calculations for model atoms and molecules in strong laser fields

Using the finite-element discrete variable representation of the nonequilibrium Green's function (NEGF) we extend previous work [K. Balzer et al., Phys. Rev. A 81, 022510 (2010)] to nonequilibrium situations and compute--from the two-time Schwinger-Keldysh-Kadanoff-Baym equations--the response of the helium atom and the heteronuclear molecule lithium hydride to laser fields in the uv and xuv regimes. In particular, by comparing the one-electron density and the dipole moment to time-dependent Hartree-Fock results on one hand and the full solution of the time-dependent Schroedinger equation on the other hand, we demonstrate that the time-dependent second Born approximation carries valuable information about electron-electron correlation effects. Also, we outline an efficient distributed memory concept which enables a parallel and well-scalable algorithm for computing the NEGF in the two-time domain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chapel HyperGraph Library (CHGL)

We present the Chapel Hpergraph Library (CHGL), a library for hypergraph computation in the emerging Chapel language. Hypergraphs generalize graphs, where a hypergraph edge can connect any number of vertices. Thus, hypergraphs capture high-order, high-dimensional interactions between mulitple entities that are not directly expressible in graphs. CHGL is designed to provide HPC-class computation with high-level abstractions and modern language support for parallel comptuing on shared memory and distributed memory systems.

Jenkins, Louis P.↗

SU-E-T-303: Spot Scanning Dose Delivery with Rapid Cycling Proton Beams From RCMS

Purpose: A rapid cycling proton beam has several distinct characteristics superior to a slow extraction synchrotron: The beam energy and energy spread, beam intensity and spot size can be varied spot by spot. The feasibility of using a spot scanning beam from a rapidc-ycling-medical-synchrotron (RCMS) at 10 Hz repetition frequency is investigated in this study for its application in proton therapy. Methods: The versatility of the beam is illustrated by two examples in water phantoms: (1) a cylindrical PTV irradiated by a single field and (2) a spherical PTV irradiated by two parallel opposed fields. A uniform dose distribution is to be delivered to the volumes. Geant4 Monte Carlo code is used to validate the dose distributions in each example. Results: Transverse algorithms are developed to produce uniform distributions in each transverseplane in the two examples with a cylindrical and a spherical PTV respectively. Longitudinally, different proton energies are used in successive transverse planes toproduce the SOBP required to cover the PTVs. In general, uniformity of dosedistribution within 3% is obtained for the cylinder and 3.5% for the sphere. The transversealgorithms requires only few hundred beam spots for each plane The algorithms may beapplied to larger volumes by increasing the intensity spot by spot for the same deliverytime of the same dose. The treatment time can be shorter than 1 minute for any fieldconfiguration and tumor shape. Conclusion: The unique beam characteristics of a spot scanning beam from a RCMS at 10 Hz repetitionfrequency are used to design transverse and longitudinal algorithms to produce uniformdistribution for any arbitrary shape and size of targets. The proposed spot scanning beam ismore versatile than existing spot scanning beams in proton therapy with better beamcontrol and lower neutron dose. This work is supported in part by grants from the US Department of Energy under contract; DE-FG02-12ER41800 and the National Science Foundation NSF PHY-1205431.

07 ISOTOPE AND RADIATION SOURCES↗

GridPACK™ : A Framework for Developing Power Grid Simulations on High-Performance Computing Platforms

This paper describes the GridPACK™ framework, which is designed to help power grid engineers develop modeling software capable of running on high performance computers. The framework makes extensive use of software templates to provide high level functionality while at the same time allowing developers the freedom to express whatever models and algorithms they are using. GridPACK™ contains modules for setting up distributed power grid networks, assigning buses and branches with arbitrary behaviors to the network, creating distributed matrices and vectors and using parallel linear and non-linear solvers to solve algebraic equations. It also provides mappers to create matrices and vectors based on properties of the network and functionality to support IO and to mana

Palmer, Bruce J.↗

Development of a Long Life Photomultiplier Tube for High Flux Applications

This detector R&D proposal focused on the development of long-life microchannel plate (MCP) photomultiplier tubes (PMTs), capable of high rate operations. A microchannel plate is basically a thin (typically less than 1 mm) lead-glass disk with a regular array of tiny tubes (microchannels) that are densely distributed over the entire surface. The parallel microchannels, or pores, typically range in diameter from 2 to 25 µm, and each one forms a continuous-dynode electron multiplier, in which the multiplication takes place under the presence of a strong electric field.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Advanced Data Structures for Improved Cyber Resilience and Awareness in Untrusted Environments: LDRD Report

This report summarizes the work performed under the project "Advanced Data Structures for Improved Cyber Resilience and Awareness in Untrusted Environments." The goal of the project was to design, analyze, and test new data structures for cybersecurity applications. We had two major thrusts: 1) using new/improved write-optimized data structures and/or algorithms to better man- age and analyze high-speed massive-volume cyberstreams, and 2) adding security features to data structures at minimum cost. Write optimization allows data structures to better use secondary memory to store and search a larger amount of useful information. Secondary memory is large compared to main memory, but data movement to and from secondary memory must be carefully managed to run quickly enough to keep up with fast streams. The first thrust included managing cyberstreams in parallel, both multi-threaded and distributed, and improving the benchmarking infrastructure for testing new streaming data structures. We considered both (near) real-time discovery of particular patterns, and improved logging for improved forensics. We considered two kinds of security-feature problem. The first was high-performance history- independent external-memory data structures. These provide certain protections to data if a disk is stolen. We also prove some trade-offs between speed and security in this setting. The second data-security problem is more secure data look-up in secret-shared data bases. This report summarizes the project's major accomplishments, with the background to under- stand these accomplishments. It gathers the abstracts and references for the six refereed publications that have appeared as part of this work. We summarize several accomplishments that will be submitted for publication. We then archive one piece of partial work that is not likely to be published in the near future: validation of history-independent data structure implementations.

97 MATHEMATICS AND COMPUTING↗

THE IBEX RIBBON AND THE PICKUP ION RING STABILITY IN THE OUTER HELIOSHEATH. II. MONTE-CARLO AND PARTICLE-IN-CELL MODEL RESULTS

The nearly circular ribbon of energetic neutral atom (ENA) emission discovered by NASA’s Interplanetary Boundary EXplorer satellite ( IBEX ), is most commonly attributed to the effect of charge exchange of secondary pickup ions (PUIs) gyrating about the magnetic field in the outer heliosheath (OHS) and the interstellar space beyond. The first paper in the series (Paper I) presented a theoretical analysis of the pickup process in the OHS and hybrid-kinetic simulations, revealing that the kinetic properties of freshly injected proton rings depend sensitively on the details of their velocity distribution. It was demonstrated that only rings that are not too narrow (parallel thermal spread above a few km s{sup −1}) and not too wide (parallel temperature smaller than the core plasma temperature) could remain stable for a period of time long enough to generate ribbon ENAs. This paper investigates the role of electron dynamics and the extra spatial degree of freedom in the ring ion scattering process with the help of two-dimensional full particle-in-cell (PIC) kinetic simulations. A good agreement is observed between ring evolution under unstable conditions in hybrid and PIC models, and the dominant modes are found to propagate parallel to the magnetic field. We also present more realistic ribbon PUI distributions generated using Monte Carlo simulations of atomic hydrogen in the global heliosphere and examine the effect of both the cold ring-like and the hot “halo” PUIs produced from heliosheath ENAs on the ring stability. It is shown that the second PUI population enhances the fluctuation growth rate, leading to faster isotropization of the solar-wind-derived ring ions.

79 ASTRONOMY AND ASTROPHYSICS↗

Theoretical analysis of the density within an orbiting molecular shield

An analytical model based on the kinetic theory of a drifting Maxwellian gas is used to determine the nonequilibrium molecular density distribution within a hemispherical shell open aft with its axis parallel to its velocity. Separate numerical results are presented for the primary and secondary density distribution components due to the drifting Maxwellian gas for speed ratios between 2.5 and 10. An analysis is also made of the density component due to gas desorbed from the wall of the hemisphere, and numerical results are presented for the density distribution. It is shown that the adsorption process may be completely ignored. The results are applicable to orbital trajectories in any planet-atmosphere system and interplanetary transfer trajectories. Application to the earth's atmosphere is mentioned briefly.

Hueser, J. E.↗

Ion heating by strong electrostatic ion cyclotron turbulence

A theory of the ion heating due to electrostatic ion cyclotron (EIC) waves in the auroral zone is presented. Due to the slowly convecting nature of the EIC mode, quasi-linear plateau formation cannot stabilize the waves, and growth occurs until the nonlinear mechanisms of ion resonance broadening and electron trapping provide saturation. The large amplitude and coherent nature of the resulting wave imply that quasi-linear theory provides only a lower limit to the ion heating. An upper bound on the heating rate is derived using a time-average model of ion dynamics in the coherent waves. The effects of ion heating in the presence of the magnetic gradient force and parallel electric fields are considered, with the result that perpendicular energies over 100 eV are easily attainable from a 1 eV source plasma. Perpendicular heating in the absence of a parallel electric field yields conical ion distributions, which in the presence of an electric field become field-aligned beams.

Lysak, R. L.↗

Technology and future ground processing systems

Land-observing satellites with multiple thematic mappers will produce data at rates of 100 to 300 Mbps. When coupled with a high daily scene production rate, these rates will require new approaches to ground processing. Consideration is given here to future downlink rates and data volumes, and requirements peculiar to the future user community are discussed. The advanced technologies required to attain an operational system in the years 1985-1990 are considered, together with advances foreseen in communications, mass storage, bulk memories, and data processing. Using advanced devices, a centralized data processing system capable of handling the 100 Mbps data rate is described. New approaches, among them a parallel pipelined calibration front-end, real-time browse image production, a high bandwidth optical disk archive, regional image broadcast and massively parallel product production, are considered. A distributed system capable of handling the 300 Mbps data rate is then described. Designs for a hub system and a regional processing center are presented.

Wood, B. J.↗

Design, fabrication and testing of a multibeam forming network

A concept for a multiple beam forming network to route signals from eight input ports to twenty-one output ports so as to form eight independent seven-element cluster radiators was designed, fabricated, and tested. The operating frequency band is 2.226 to 2.254 GHz and the maximum power to any input port is two watts. The network consists of eight seven-way power dividers connected to twenty-one seven-way power combiners. The network utilizes barline circuits between parallel ground planes for the power distribution and collection. Interconnections are made with short rigid co-axial lines built into the network. The concept, general design procedures, mechanical configuration, and electrical performance are described. It appears that the network is quite satisfactory for demonstrating practical feasibility of the technical concept.

Source record↗

Gyrating ions and large-amplitude monochromatic MHD waves upstream of the earth's bow shock

Episodes of nearly monochromatic, low-frequency (0.03 Hz) hydromagnetic waves are occasionally observed upstream of the earth's bow shock. High time resolution (3 s) measurements of two-dimensional ion distributions during two nearly monochromatic wave events reveal that the ion distributions asociated with these waves are 'gyrating ions.' Such distributions consists of suprathermal ions with parallel and perpendicular velocities confined to a fairly narrow range of (nonzero) values. The ions are also often confined to a fairly narrow range of gyrophase angle ('gyrophase bunched'). In one of the two cases, the observed frequency of the waves agrees quite well with the Doppler shifted resonance frequency of waves in right-hand resonance with the observed gyrating ions. In the second case, the observed frequency is lower than the predicted frequency by a factor of 1.5-2.

Thomsen, M. F.↗

An improved multilevel optimization approach for the design of complex engineering systems

Multilevel optimization methods are being considered for the design of complex systems on distributed networks of computers or even parallel processors. An obstacle to the use of multilevel methods is that they can be computationally expensive because of the cycling necessary to account for the coupling between the subproblems. This research effort aims at increasing the efficiency of multilevel optimization by adapting two techniques that are widely used in conventional one-level optimization: constraint approximation and temporary constraint deletion. These improvements are implemented and tested on three-, ten- and 52-bar planar truss designs. The results show that for larger problems (approximately 100 design variables and larger), the cost of analysis dominates the total cost so that multilevel optimization is no more expensive than one-level optimization. If parallel processing is used or the analysis process itself is decomposed, then multilevel optimization stands to become more economical than one-level optimization.

Barthelemy, J.-F. M.↗

Data storage systems technology for the Space Station era

The paper presents the results of an internal NASA study to determine if economically feasible data storage solutions are likely to be available to support the ground data transport segment of the Space Station mission. An internal NASA effort to prototype a portion of the required ground data processing system is outlined. It is concluded that the requirements for all ground data storage functions can be met with commercial disk and tape drives assuming conservative technology improvements and that, to meet Space Station data rates with commercial technology, the data will have to be distributed over multiple devices operating in parallel and in a sustained maximum throughput mode.

Dalton, John↗

Ion beam heating in the auroral zone

Recent satellite observations at high altitudes (above 5000 km) in the auroral zone have shown the existence of hybrid or bimodal ion beam distributions that are evidence of both parallel and perpendicular ion acceleration. To study the nonlinear effects of the ion-ion instability in terms of plasma heating, a numerical simulation parametric study has been performed. It was found that the parallel acceleration that forms the ion beams occurs on a time scale faster than ion-ion wave growth at low drifts; thus ion-ion wave growth is expected to occur primarily for higher drift speeds, which results in strong oblique heating of the ions (both hydrogen and oxygen) forming elevated ion conics.

Schriver, David↗

Software environment for implementing engineering applications on MIMD computers

In this paper the concept for a software environment for developing engineering application systems for multiprocessor hardware (MIMD) is presented. The philosophy employed is to solve the largest problems possible in a reasonable amount of time, rather than solve existing problems faster. In the proposed environment most of the problems concerning parallel computation and handling of large distributed data spaces are hidden from the application program developer, thereby facilitating the development of large-scale software applications. Applications developed under the environment can be executed on a variety of MIMD hardware; it protects the application software from the effects of a rapidly changing MIMD hardware technology.

Lopez, L. A.↗