Search NASA⌕ Search

SEARCH · Search NASA

Results for “fluence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Radiation damage to amorphous carbon thin films irradiated by multiple 46.9 nm laser shots below the single-shot damage threshold

High-surface-quality amorphous carbon (a-C) optical coatings with a thickness of 45 nm, deposited by magnetron sputtering on a silicon substrate, were irradiated by the focused beam of capillary-discharge Ne-like Ar extreme ultraviolet laser (CDL=capillary-discharge laser; XUV=extreme ultraviolet, i.e., wavelengths below 100 nm). The laser wavelength and pulse duration were 46.9 nm and 1.7 ns, respectively. The laser beam was focused onto the sample surface by a spherical Sc/Si multilayer mirror with a total reflectivity of about 30%. The laser pulse energy was varied from 0.4 to 40 muJ on the sample surface. The irradiation was carried out at five fluence levels between 0.1 and 10 J/cm{sup 2}, accumulating five different series of shots, i.e., 1, 5, 10, 20, and 40. The damage to the a-C thin layer was investigated by atomic force microscopy (AFM) and Nomarski differential interference contrast (DIC) optical microscopy. The dependence of the single-shot-damaged area on pulse energy makes it possible to determine a beam spot diameter in the focus. Its value was found to be equal to 23.3+-3.0 mum using AFM data, assuming the beam to have a Gaussian profile. Such a plot can also be used for a determination of single-shot damage threshold in a-C. A single-shot threshold value of 1.1 J/cm{sup 2} was found. Investigating the consequences of the multiple-shot exposure, it has been found that an accumulation of 10, 20, and 40 shots at a fluence of 0.5 J/cm{sup 2}, i.e., below the single-shot damage threshold, causes irreversible changes of thin a-C layers, which can be registered by both the AFM and the DIC microscopy. In the center of the damaged area, AFM shows a-C removal to a maximum depth of 0.3, 1.2, and 1.5 nm for 10-, 20- and 40-shot exposure, respectively. Raman microprobe analysis does not indicate any change in the structure of the remaining a-C material. The erosive behavior reported here contrasts with the material expansion observed earlier [L. Juha et al., Proc. SPIE 5917, 91 (2005)] on an a-C sample irradiated by a large number of femtosecond pulses of XUV high-order harmonics.

36 MATERIALS SCIENCE↗

Patterned Exfoliation of GaAs Based on Masked Helium Implantation and Subsequent Rapid Thermal Annealing

A method of patterning single crystal GaAs based on ion implantation induced selective area exfoliation is suggested. Samples were implanted with 200-500 keV helium ions to a fluence range of 2-4x10{sup 16} He{sup +}/cm{sup 2} at room temperature through masks of Ni mesh (40 {mu}m opening) or stainless steel wire (50 {mu}m in diameter), and subsequent rapid thermal annealing at 350-500{open_square} resulted in expulsion of ion beam exposed material. The influences of ion energy, ion fluence, implantation temperature, subsequent annealing conditions (temperature and ramp rate), and mask pattern and its orientation with GaAs lattice on the patterned exfoliation were examined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nature of Defects Induced by Au Implantation in Hexagonal Silicon Carbide Single Crystals

Pulsed-slow-positron-beam-based positron lifetime spectroscopy was used to investigate the nature of vacancy defects induced by 20 MeV Au implantation in single crystals 6H-SiC. Preliminary analysis of the data shows that at lower fluence, below 10{sup 14} cm{sup -2}, a positron lifetime of 220 ps has been obtained: it could be associated with the divacancy V{sub Si}-V{sub C} in comparison with the literature. At higher fluence, above 10{sup 15} cm{sup -2}, a positron lifetime of 260-270 ps, increasing with the incident positron energy, has been observed after decomposition of the lifetime spectra. By comparison with lifetime calculations, open-volumes such as quadrivacancy (V{sub Si}-V{sub C}){sub 2} clusters could be associated with this value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and cathodoluminescence properties of ZnO nanorods after Ga-implantation and annealing

Single-crystalline ZnO nanorods were implanted with 30 keV Ga{sup +} ions and fluences between 5x10{sup 12} and 1.5x10{sup 16} cm{sup -2}. Annealing treatments at temperatures up to 700 deg. C for 1 h were carried out to reduce implantation-induced structural defects. The structural and optical properties of the nanorods were studied by transmission electron microscopy (TEM) and cathodoluminescence (CL) spectroscopy. TEM shows that extended implantation defects vanish completely in nanorods implanted with doses up to 5x10{sup 13} cm{sup -2} after annealing at 700 deg. C. Dislocation loops remain after implantation with higher fluences. The CL intensity of as-grown nanorods and implanted ZnO nanorods is low. Annealing at 700 deg. C leads to a significant increase in the CL intensity for as-grown nanorods and implanted with a dose of up to 5x10{sup 13} cm{sup -2}. The strong CL intensity in implanted and annealed nanorods correlates with the complete disappearance of extended structural defects.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Neutron and high energy deuteron anisotropy investigations in plasma focus device

The anisotropies of neutron and high energy deuteron emissions from the NX2 plasma focus device [M. V. Roshan et al., Phys. Lett. A 373, 851 (2009)] are studied. The nuclear activation of graphite targets is used to measure the fluences of high energy deuterons in the axial and radial directions. Two bismuth germanate scintillation detectors connected to multichannel analyzer systems are used for the detection of 511 keV gamma rays resulting from positron annihilation in the two targets. In addition, fast neutron activation detectors are employed to measure the axial and radial fluences of fusion neutrons. These detection systems are calibrated using the simulation code MCNPX[L. S. Waters et al., AIP Conf. Proc. 896, 81 (2007)]. Two distinct regimes of neutron and deuteron anisotropies are observed for the NX2 device. For deuterium gas pressures below 10 mbar, the neutron anisotropy increases with increasing pressure, while the overall neutron yield remains low. For gas pressures of 10-14 mbar, the neutron anisotropy is essentially constant, while, with increasing pressure, the neutron yield rises rapidly and the deuteron anisotropy falls.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Canonical correlation between the gamma and X-ray data of Swift GRBs

We used the canonical correlation analysis of the multivariate statistics to study the interrelation between the gamma (Fluence, 1 sec Peakflux, duration) and X-ray (early X flux, 24 hours X flux, X decay index, X spectral index, X HI column density) data. We computed the canonical correlations and variables showing that there is a significant interrelation between the gamma and X-ray data. Using the canonical variables resulted in the analysis we computed their correlations (canonical loadings) with the original ones. The canonical loadings revealed that the gamma-ray fluence and the early X-ray flux give the strongest contribution to the correlation in contrast to the X-ray decay index and spectral index. An interesting new result appears to be the strong contribution of the HI column density to the correlation. Accepting the collapsar model of long GRBs this effect may be interpreted as an indication for the ejection of an HI envelope by the progenitor in the course of producing the GRB.

79 ASTRONOMY AND ASTROPHYSICS↗

Plasma sheath physics and dose uniformity in enhanced glow discharge plasma immersion ion implantation and deposition

Based on the multiple-grid particle-in-cell code, an advanced simulation model is established to study the sheath physics and dose uniformity along the sample stage in order to provide the theoretical basis for further improvement of enhanced glow discharge plasma immersion ion implantation and deposition. At t=7.0 mus, the expansion of the sheath in the horizontal direction is hindered by the dielectric cage. The electron focusing effect is demonstrated by this model. Most of the ions at the inside wall of the cage are implanted into the edge of the sample stage and a relatively uniform ion fluence distribution with a large peak is observed at the end. Compared to the results obtained from the previous model, a higher implant fluence and larger area of uniformity are disclosed.

36 MATERIALS SCIENCE↗

Parametric study of expanding plasma plume formed by laser-blow-off of thin film using triple Langmuir probe

The triple probe technique has been used to study the parameters of flowing plasma plume formed by laser-blow-off (LBO) of a multicomponent LiF-C target. The advantages of triple Langmuir probe over the single probe have been discussed with regard to the present study. Our results show that triple probe is better suited for parametric measurements close to the target. The spatiotemporal evolutions of electron density and temperature were measured in different ambient environments and for various laser fluences. The angular distribution of electron density and temperature was also measured. It was found that the presence of ambient gas drastically affects the electron density and temperature of the LBO plume. Large enhancement in n{sub e} and T{sub e} at intermediate pressures (10{sup -2} Torr) is expected due to increase in collisional processes. On the other hand, laser fluence does not affect the observed n{sub e} and T{sub e} significantly. In vacuum, a new phenomenon, i.e., an oscillation in the trailing portion of the plasma plume at a closer distance from the target, is also reported.

36 MATERIALS SCIENCE↗

Effect of 100 MeV swift heavy ions [silver (Ag{sup 8+})] on morphological and electrical properties of polypyrrole

Polypyrrole (PPY) films were prepared by the electrochemical polymerization technique. The fully undoped samples were irradiated with different fluences ranging from 10{sup 10} to 10{sup 12} ions/cm{sup 2} of 100 MeV silver (Ag{sup 8+}) ions. In order to explain the effect of these radiations, a comparative study of samples before and after irradiation was performed by using various techniques such as surface electron microscopy, atomic force microscopy, and X-ray diffraction. With an increase in fluence, the surface structure of PPY films becomes smoother, and the conductivity increases by two orders, which has been explained in light of reordering of polymer chains. The temperature dependence of the dc conductivity of irradiated as well as unirradiated samples has been investigated at 77-300 K. The charge transport properties before and after irradiation are retained although conductivity increases. It has been proposed that swift heavy ion irradiation affects the interchain conductivity. The conductivity of irradiated samples is stable under atmospheric conditions for more than 9 months. The present investigations open up the scope for the applicability of irradiated conducting polymers as microstructures with defined conductivity for sensor applications.

36 MATERIALS SCIENCE↗

Breakdown of silicon particle detectors under proton irradiation

Silicon particle detectors made on Czochralski and float zone silicon materials were irradiated with 7 and 9 MeV protons at a temperature of 220 K. During the irradiations, the detectors were biased up to their operating voltage. Specific values for the fluence and flux of the irradiation were found to cause a sudden breakdown in the detectors. We studied the limits of the fluence and the flux in the breakdown as well as the behavior of the detector response function under high flux irradiations. The breakdown was shown to be an edge effect. Additionally, the buildup of an oxide charge is suggested to lead to an increased localized electric field, which in turn triggers a charge carrier multiplication. Furthermore, we studied the influences of the type of silicon material and the configuration of the detector guard rings.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radiation effects in single-walled carbon nanotube papers

The effects of ionizing radiation on the temperature-dependent conductivity of single-walled carbon nanotube (SWCNT) papers have been investigated in situ in a high vacuum environment. Irradiation of the SWCNT papers with 4.2 MeV alpha particles results in a steady decrease in the SWCNT paper conductivity, resulting in a 25% reduction in room temperature conductivity after a fluence of 3x10{sup 12} alpha particles/cm{sup 2}. The radiation-induced temperature-dependent conductivity modification indicates that radiation damage causes an increase in the effective activation barrier for tunneling-like conductivity and a concomitant increase in wavefunction localization of charge carriers within individual SWCNTs. The spatial defect generation within the SWCNT paper was modeled and confirms that a uniform displacement damage dose was imparted to the paper. This allows the damage coefficient (i.e., differential change in conductivity with fluence) for alpha particles, carbon ions, and protons to be compared with the corresponding nonionizing energy loss (NIEL) of the incident particle. The resulting nonlinear relationship with NIEL between these parameters is distinct from the more typical linear response observed in many bulk semiconductors and superconductors and indicates that localized radiation damage in the SWCNT papers has a greater impact than distributed damage. Although SWCNT papers behave largely as a bulk material with properties that are a convolution of the underlying SWCNT distribution, the radiation response appears to be largely dominated by degradation in the preferred one-dimensional conduction within these two-dimensionally confined nanostructures.

36 MATERIALS SCIENCE↗

Formation of conical silicon tips with nanoscale sharpness by localized laser irradiation

The formation of conical silicon tips with nanoscale sharpness as a result of single-pulse localized laser irradiation is presented in this work. A Q-switched neodymium doped yttrium aluminum garnet nanosecond-pulse laser, emitting at its fourth harmonic of 266 nm, and a mask projection technique were used to generate circular laser spots, several microns in diameter. The irradiation of silicon-on-insulator films was performed in ambient, vacuum, or argon atmospheres, with the resulting structures and underlying substrate examined via atomic force microscopy and scanning electron microscopy. The laser fluence range within which tip formation occurs is strongly dependent on the irradiated spot size. Within this range, the height of the resulting tip increases with the fluence level, while nearly preserving the aspect ratio. The formation mechanism of these structures is briefly discussed in view of these results and other, related published work.

36 MATERIALS SCIENCE↗

Irradiation damage in graphene on SiO{sub 2} probed by local mobility measurements

Using a method based on scanning capacitance spectroscopy, local measurements of the electron mean free path (l) and mobility (mu) have been carried out on single layers of graphene (SLG) mechanically exfoliated from highly oriented pyrolytic graphite and deposited on SiO{sub 2}/Si. Lateral inhomogeneity of l and mu was found both on pristine and ion irradiated SLG with different C ion fluences (from 10{sup 13} to 10{sup 14} cm{sup -2}), with an increasing spread in the distribution of l and mu for larger fluences. Before irradiation, the spread was explained by the inhomogeneous distribution of charged impurities on SLG surface and/or at the interface with SiO{sub 2}. After irradiation, lattice vacancies cause a local reduction of mu in the damaged regions.

36 MATERIALS SCIENCE↗

Damage free laser ablation of SiO{sub 2} for local contact opening on silicon solar cells using an a-Si:H buffer layer

We have used a Q-switched Nd:YVO{sub 4}, diode pumped 532 nm laser with nanosecond pulses, and a spot diameter of 40 {mu}m to ablate a layer of plasma enhanced chemical vapor deposited (PECVD) SiO{sub 2} on n-type Cz silicon, with the aim of making local contact openings on back-junction silicon solar cells. Laser pulses within the ns range are usually believed to be incompatible with processing of high efficiency solar cells because such long pulses induce too much damage into the underlying silicon lattice. This is due to thermal dissipation. In this work, a PECVD layer of a-Si:H between the n-type silicon and the dielectric layer is shown to absorb much of the laser radiation and allows for ablation at laser fluences lower than the ablation threshold of crystalline silicon. In addition, the a-Si:H layer serves as an excellent surface passivation layer for the silicon substrate. We show that it is possible to ablate PECVD SiO{sub 2} in a damage free way with fluences five times lower than those needed to ablate crystalline Si. Our results are verified experimentally with high resolution transmission electron microscopy of the crystal structure in the laser irradiated areas, and quasi-steady-state photoconductance measurements of emitter saturation currents. In addition, we have simulated the energy transfer from a ns 532 nm Gaussian shaped laser beam to a SiO{sub 2} covered Si lattice with and without the a-Si:H buffer layer. A model that coincides very well with the experiments is found.

36 MATERIALS SCIENCE↗

Properties of nitrogen implanted and electron beam annealed bulk ZnO

The optical properties of bulk ZnO ion implanted with nitrogen ions, at an energy of 23 keV have been studied as a function of implantation fluence and electron beam (EB) annealing conditions. Nuclear reaction analysis and Raman results have revealed the implanted N concentration and its structural changes with respect to various nitrogen ion fluences. The optical properties of nitrogen implanted bulk ZnO were investigated by low temperature photoluminescence measurements. An enhanced peak at 3.235 eV has been attributed to donor-accepter pair (DAP) emission involving the implanted N acceptor in ZnO. The emission near 3.3085 eV is attributed to a free electron to acceptor transition. We also report a broad band emission feature at {approx}3.09 eV in the nitrogen implanted with 1-2x10{sup 15} ions cm{sup -2} and EB annealed at 800-900 deg. C. This is assigned to a thermally activated nitrogen acceptor transition as it is unique only to nitrogen implanted samples. An ionization energy of 377 meV indicates that this line may correspond to a significantly less shallow acceptor level. In addition an increase in the intensity and dominance of this DAP line in nitrogen implanted samples over the other acceptor transitions was observed with increasing annealing time and temperatures. It is shown that EB annealing offers a method of enhanced nitrogen activation when compared to a more conventional furnace approach.

36 MATERIALS SCIENCE↗

Magnetic properties of granular CoCrPt:SiO{sub 2} films as tailored by Co{sup +} irradiation

We report on an approach to tailor the magnetic exchange in a conventional granular CoCrPt:SiO{sub 2} recording medium by irradiation with Co{sup +} ions. Irradiation at low fluences enhances the intergranular exchange resulting in a narrowing of the switching field distribution (SFD). The modification of magnetic exchange coupling was evidenced by measuring the angular dependence of the switching field and is supported by an increase in the magnetic domain size. Further, micromagnetic simulations of a granular magnetic medium confirm the correlation between intergranular exchange and SFD. At high fluences, however, the irradiation damages lead to the degradation of the magnetic layer as magnetic anisotropy and saturation magnetization decrease. Ion irradiation simulations suggest that this is caused by strong intermixing at the grain and layer interfaces.

36 MATERIALS SCIENCE↗

Interfacial mixing and internal structure of Pt-containing nanocomposites grown by room temperature electron beam induced deposition

Material grown by room temperature electron beam induced deposition (EBID) using (CH{sub 3}){sub 3}CH{sub 3}C{sub 5}H{sub 4}Pt precursor consists of platinum nanocrystals embedded in an amorphous matrix. The crystallites are shown to intermix with the amorphous oxide on a Si substrate. The extent of intermixing scales with the electron energy density delivered to the material during growth. Dependencies on electron flux, fluence, and exposure time indicate that the intermixing process is athermal, electron-activated, and rate limited by mass transport inside the solid. Furthermore, the degree of deposit crystallinity is shown to scale with the electron flux and fluence used for EBID. We discuss mechanisms behind the observed changes in nanostructure and implications for the growth of functional materials by EBID.

36 MATERIALS SCIENCE↗

Models For Laser Ablation Mass Removal And Impulse Generation In Vacuum

To the present day, literature efforts at modeling laser propulsion impulse often used empirical models. Recently, a simple physical approach was demonstrated to be effective for predicting many practical properties of laser ablative impulse generation under vacuum. The model used photochemical mass removal and energy conservation to predict parameters such as the peak momentum coupling coefficient, the optimal fluence position at which this maximum is reached, and various critical properties related to the laser ablation threshold. Although the current model understanding is not complete, improvements in the treatment of mass removal and ambient pressure are expected to allow this type of model to be broadly applicable to many diverse applications using laser ablation impulse generation. In this paper, we also introduce an alternative formulation of the model incorporating photothermal mass removal. Implications and limitations of the model formulation in its initial stage of development are discussed, particularly concerning critical fluence effects and directions for improvement.

42 ENGINEERING↗