Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

SINGLE: Atomic-resolution structure identification of nanocrystals by graphene liquid cell EM

Analysis of the three-dimensional (3D) structures of nanocrystals with solution-phase transmission electron microscopy is beginning to reveal their unique physiochemical properties. We developed a “one-particle Brownian 3D reconstruction method” based on imaging of ensembles of colloidal nanocrystals using graphene liquid cell electron microscopy. Projection images of differently rotated nanocrystals are acquired using a direct electron detector with high temporal (<2.5 ms) resolution and analyzed to obtain an ensemble of 3D reconstructions. Here, we introduce computational methods required for successful atomic-resolution 3D reconstruction: (i) tracking of the individual particles throughout the time series, (ii) subtraction of the interfering background of the graphene liquid cell, (iii) identification and rejection of low-quality images, and (iv) tailored strategies for 2D/3D alignment and averaging that differ from those used in biological cryo–electron microscopy. Our developments are made available through the open-source software package SINGLE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

ON THE ANALATICAL SOLUTIONS AND NUMERICAL VERIFICATIONS OF THE TWO-PHASE WATER FAUCET PROBLEM

The two-phase water faucet problem is one of the benchmark problems originally proposed by Ransom. The test consists of a vertical pipe, which is initially filled with a uniform column of liquid moving with an initial velocity and an annulus of gas sitting still. At the top boundary, liquid is supplied at the same velocity as the initial velocity, and the bottom of the pipe opens to the ambient. Due to the gravity effect, the liquid column accelerates and becomes thinner. With simplifications, such as massless gas phase and no wall and interfacial frictions, an analytical solution could be obtained for the transient liquid velocity and void fraction distribution. The test has been widely used for the purposes of code assessment, benchmark and numerical verifications. This exact solution was used in this work to verify the numerical accuracy of a high-resolution spatial discretization scheme. The high-resolution spatial discretization scheme is based on the commonly used staggered grid mesh, and slope limiter was introduced to achieve high resolutions in space. It was found that, at the steady state, an expected second-order spatial accuracy could not be achieved. A further investigation showed that this exact solution does not actually satisfy the commonly used two-fluid single pressure two-phase flow equations. More importantly, we have also found that a steady-state exact solution could be obtained for the water faucet problem. In this work, we have demonstrated the derivation of the steady-state exact solution for the water faucet problem. The exact solution was then used to verify a first-order and a high-resolution spatial discretization scheme, from which expected order of accuracy was achieved by doing mesh refinement.

42 ENGINEERING↗
DOE OSTI2016

Comparative atomic-scale hydration of the ceramide and phosphocholine headgroup in solution and bilayer environments

Previous studies have used neutron diffraction to elucidate the hydration of the ceramide and the phosphatidylcholine headgroup in solution. These solution studies provide bond-length resolution information on the system, but are limited to liquid samples. The work presented here investigates how the hydration of ceramide and phosphatidylcholine headgroups in a solution compares with that found in a lipid bilayer. This work shows that the hydration patterns seen in the solution samples provide valuable insight into the preferential location of hydrating water molecules in the bilayer. There are certain subtle differences in the distribution, which result from a combination of the lipid conformation and the lipid-lipid interactions within the bilayer environment. The lipid-lipid interactions in the bilayer will be dependent on the composition of the bilayer, whereas the restricted exploration of conformational space is likely to be applicable in all membrane environments. The generalized description of hydration gathered from the neutron diffraction studies thus provides good initial estimation for the hydration pattern, but this can be further refined for specific systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Uncertainty evaluation for the matrix 'solidified state' of fissionable elements

In case of the analysis of the radioactive liquid samples, no matter the relative physical analysis method used, two impediments act that belong to the behavior in time of the dispersion state of the liquid samples to be analyzed and of the standard used in the analysis. That is, one of them refers to the state of the sample to be analyzed when being sampled, which 'alter' during the time elapsed from sampling up to the analysis of the sample. The other impediment is the natural change of the dispersion state of the standard radioactive solutions, due to the occurrence and evolution in time of the radiocolloidal and pseudo-radiocolloidal states. These radiocolloidal states are states of aggregation and they lead to the destruction of the homogeneity of the solutions. Taking into consideration the advantages offered by the relative physical methods of analysis as against the chemical or the radiochemical ones, different ways of eliminating these impediments have been tried. We eliminated these impediments processing the liquid reference materials (the solutions calibrated in radionuclides of interest), immediately after the preparation. This processing changes the liquid physical state of the reference materials in a 'solidified state'. Through this procedure the dispersion states of the samples, practically, can no longer be essentially modified in time and also ensure the uniform distribution of the radionuclides of interest in the elemental matrix of the samples 'state solidified'. The homogeneity of the distribution of the atoms of the radionuclides from the samples 'solidified state' was checked up through the track micromapping technique of the alpha particles. Through this technique, in the chemically etched track detectors that were put in direct contact with the sample for a determined period of time, the alpha exposure time of the detectors, micromaps of alpha tracks were obtained. These micromaps are retorts through tracks of the distributions atoms of fissionable elements (Thorium e.g.), of which, heavy charged particles, in this case the alpha radiations naturally emitted, were registered in the CR-39 track detectors. The density of alpha track from the obtained track micromaps was studied through common optic microscopy. Micromaps were studied counting the tracks on equal areas, in different measurement points. For the study of the foils prepared within the paper, the studied area was of 4.9 mm2, formed of 10 fields of 0.49 mm2 area each. The estimation of the uncertainty was carried out for all the sizes that were measured within the paper, no matter if they participate, directly or indirectly, in the estimation of the uncertainty regarding the homogeneity of the Thorium atoms distribution in the 'solidified state' foils of the standard solution calibrated in Thorium, such as: i) the weighted masses, ii) the dropped volumes of solution, iii) the alpha duration of exposure of the detectors, iv) the area studied on the surface of the micromap and v) the densities of alpha tracks. The procedure suggested allowed us to considerate that the homogeneity of alpha tracks distribution, on the surface and in thickness, is within the limits of 3.1%.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Can Solution Supersaturation Affect Protein Crystal Quality?

The formation of large protein crystals of "high quality" is considered a characteristic manifestation of microgravity. The physical processes that predict the formation of large, high quality protein crystals in the microgravity environment of space are considered rooted in the existence of a "depletion zone" in the vicinity of crystal. Namely, it is considered reasonable that crystal quality suffers in earth-grown crystals as a result of the incorporation of large aggregates, micro-crystals and/or large molecular weight "impurities", processes which are aided by density driven convective flow or mixing at the crystal-liquid interface. Sedimentation and density driven convection produce unfavorable solution conditions in the vicinity of the crystal surface, which promotes rapid crystal growth to the detriment of crystal size and quality. In this effort, we shall further present the hypothesis that the solution supersaturatoin at the crystal surface determines the growth mechanism, or mode, by which protein crystals grow. It is further hypothesized that protein crystal quality is affected by the mechanism or mode of crystal growth. Hence the formation of a depletion zone in microgravity environment is beneficial due to inhibition of impurity incorporatoin as well as preventing a kinetic roughening transition. It should be noted that for many proteins the magnitude of neither protein crystal growth rates nor solution supersaturation are predictors of a kinetic roughening transition. That is, the kinetic roughening transition supersaturation must be dtermined for each individual protein.

Gorti, Sridhar↗
DOE OSTI2021

Association‐based activity coefficient model for electrolyte solutions

Abstract This work presents an association‐based activity coefficient model that explicitly considers the solution nonideality due to associations among ions and solvent species. Built upon the electrolyte nonrandom two‐liquid (eNRTL) model, the model greatly improves the accuracy of eNRTL model for strongly associating electrolyte solutions due to presence of ionic species with high surface charge density. The model successfully correlates mean ionic activity coefficients of 46 aqueous single‐salt systems from 10 cations and 5 anions at 298.15 K up to their solubility limits. With the ion‐specific association parameters identified, the model accurately predicts activity and osmotic coefficients for aqueous mixed‐salt systems at 298.15 K. The temperature dependence of the model results has also been examined at 273–373 K. With superior accuracy over a wide range of concentration and temperature, the model represents a major advancement over eNRTL model and has a great potential to be a next‐generation model for electrolyte solutions.

Lin, Yu‐Jeng↗
DOE OSTI2021

Quantifying the chemical, electrochemical heterogeneity and spatial distribution of (poly) sulfide species using Operando SANS

In-situ and operando measurements are done to gain a better understanding of the precipitation mechanisms during charge and discharge in lithium sulfur batteries. A carbon felt networked with microfibers consisting of pores, 2 nm and smaller, is used as a freestanding sulfur host. Three different methods of sulfur infiltration are explored in order to determine the best one to fill most of the pores. It was identified to be a melt infiltration method in a vacuum oven, where the pores including the ultra-micropores, are successfully filled. In-situ electrochemical impedance spectroscopy measurements show a solid product formation occurring at the sulfur cathode, both during the high voltage plateau and at the end of discharge. In a 3-electrode EIS measurement, a similar solid product formation on the Li counter electrode due to its reaction with polysulfides is also observed. Operando small angle neutron scattering measurements show the solid product formation, in the carbon, both near the beginning and at the end of discharge, confirming the precipitation data via contrast changes as a function of charge and discharge. It is shown that Li 2 S precipitates in the pores at the beginning and the end of discharge, whereas S8 precipitates on the surface of the carbon felt. Finally, this lithium sulfur system shows both the quasi-solid-state and the solid-liquid-solid reactions in a typical ethereal electrolyte solution with a two-plateau discharge profile.

25 ENERGY STORAGE↗
DOE OSTI2015

Measuring precipitation kinetics of sparingly soluble salts using Shock-Freeze Cryo-TEM

The precipitation of barium sulphate in a rapid mixing device (Y-mixer) coupled with an instantaneous sample freezing device was studied in order to accurately measure the nucleation rate. In this Shock-Freeze Cryo-TEM (SFCT) approach, a small volume of solution was removed from the stream directly into liquid ethane by means of a gravitational guillotine. Using different pipe lengths to measure various residence times, it was possible to determine the particle size, morphology, numbers of primary particles and thus nucleation rate. The nucleation rates were found to be a strong function of Reynolds number, up to Re=3×10 4 ( Re being inversely related to the micromixing time). The measured nucleation rates ranged between 2.79×10 14 and 3.81×10 17 # m -3 s -1 at supersaturations between 4×10 6 and 1×10 8 . The measured particle sizes in this work (ranging from 62 to 320 nm for supersaturation values between 4×10 6 and 1×10 8 ) were smaller than those measured by previous researchers, possibly because previous work did not quench the reaction sufficiently fast and thus allowed the particles a longer time to increase in size. Finally, in summary, this work successfully achieved a fast, accurate and reproducible nucleation rate measurement that could also give information about particle morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

SnO 2 nanowires decorated with forsythia-like TiO 2 for photoenergy conversion

Here, we report forsythia-like TiO 2 -decorated SnO 2 nanowires on fluorine-doped SnO 2 electrode as a photoelectrode of dye-sensitized solar cells. When SnO 2 nanowires grown via vapor-liquid-solid reaction were soaked in TiCl 4 solution, leaf-shaped rutile TiO 2 was grown onto the surface of the nanowires. The TiO 2 decoration increases the short circuit current (J sc ), open circuit voltage (V oc ) and fill factor (FF) of dye-sensitized solar cells. Further, electron lifetime increased by employing an atomic-layer-deposited TiO 2 nanoshell between the TiO 2 leaves and the SnO 2 nanowire, due to preventing charge recombination at the nanowire/electrolyte interface.

14 SOLAR ENERGY↗
DOE OSTI2021

Molecular thermodynamics for scaling prediction: Case of membrane distillation

Membrane distillation (MD) for water treatment is significantly impaired by the scaling of dissolved minerals. The type and content of minerals generally measured as total dissolved solids (TDS) in hypersaline brines not only reduce the MD flux but also control the scaling behavior on the membrane surface. The scaling-induced pore blockage further reduces water flux and eventually leads to membrane wetting. The scaling problem is even more pronounced in the treatment of produced water (PW) as it contains 3–7 times higher TDS concentrations, compared to seawater. Theoretically, the necessary conditions for a salt to precipitate can be traced from its solubility product constant and activity of the constituents within the solution. Therefore, a comprehensive thermodynamic model is necessary to represent the electrolyte behavior and to predict the precipitation of different salts in a complex solution like PW. We pursued electrolyte Nonrandom Two Liquid Theory (eNRTL), a state-of-the-art electrolyte model, to address the PW fluid phase equilibria. With a fully parameterized eNRTL model, we predicted salt precipitations in two different PW samples and compared the results against the experimental findings. Furthermore, here we forecast the precipitation of salts in response to the change in PW concentration and temperature in the MD operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Deep Eutectic Solvents: A Review of Fundamentals and Applications

Deep eutectic solvents (DESs) are an emerging class of mixtures characterized by significant depressions in melting points compared to those of the neat constituent components. These green materials are promising for applications as inexpensive ’designer’ solvents exhibiting a host of tunable physicochemical properties. Here, a detailed review of the current literature reveals the lack of predictive understanding of the microscopic mechanisms that govern the structure-property relationships in this class of solvents. Complex hydrogen bonding behavior is postulated as the root cause of their melt-ing point depressions and physicochemical properties; to understand these hydrogen bonded networks, it is imperative to study these systems as dynamic entities using both simulations and experiments. This review emphasizes recent research efforts in order to elucidate the next steps needed to develop a fundamental framework for understanding DESs. It covers recent developments in DES research, frames outstanding scientific questions, and identifies gainful research thrusts that would advance the field towards predictive models and fundamental understanding of these solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Molecular Theory of Hydration at Different Temperatures

Solvation plays an important role in diverse chemical processes ranging from reaction kinetics to molecular recognition, solubility, and phase separations. Despite a long-history of theoretical exploration, quantitative prediction of solvation remains a theoretical challenge without relying on the macroscopic properties of the solvent as an input. Here we present a molecular density functional theory that provides a self-consistent description of the solvation structure and thermodynamic properties of small organic molecules in liquid water at different temperatures. Based on the solute configuration and force-field parameters generated from first-principles calculations, the theoretical predictions are found in good agreement with experimental data for the hydration free energies of 197 organic molecules in a temperature range from 0 to 40 °C. In addition to calibration with experimental results, the theoretical predictions are compared with recent molecular dynamics simulations for the hydration of five highly explosive nitrotoluenes. Lastly, this work demonstrates the potential of the classical density functional theory for high-throughput prediction of solvation properties over a broad range of temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Preparation and comparison of bulk and membrane hydrogels based on Kraft- and ionic-liquid-isolated lignins

In this work, lignin obtained from two different sources, from the Kraft process (KF-lignin) and from dissolution of wood using ionic liquid (IL-lignin), was dissolved in alkaline solution and crosslinked with different methods, attempting to form bulk and membrane hydrogels. Without a chemical crosslinker, no physical lignin gels could be formed. When employing three different chemically crosslinking routes, epichlorohydrin (ECH), polyethylene glycol (PEG)/ECH, and epoxide-terminated PEG (ETPEG), only the third route produced “hydrogels” with excellent water absorbency. To form a hydrogel, lower IL-lignin concentration (15 wt%) was needed than for KF-lignin (20 wt%). Once air-dried, both of the dense lignin/ETPEG gels showed comparable high tensile strength, independent of the type of lignin. However, while in the wet state, the IL-lignin/ETPEG hydrogels were much stronger than those from KF-lignin, thus facilitating their preparation and utilization. High water uptake was observed for all lignin/ETPEG gels, although a smaller swelling was observed with IL-lignin gels. Additionally, water vapor transmission (WVT), antioxidant efficiency, and antimicrobial activity of the membranes were determined and these data suggest their potential application as food packaging or wound dressing materials, especially for the IL-lignin membranes considering their easier formation, higher WVT, antioxidant efficiency, and wet strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

An improved lattice Boltzmann scheme for multiphase fluid with multi-range interactions

Modeling of fluids with liquid to gas phase transition has become important for understanding many environmental or industrial processes. Such simulations need new techniques, because traditional solvers are often limited. The Lattice Boltzmann Model (LBM) allows simulate complex fluids, because its mesoscopic nature gives possibility to incorporate additional physics in comparison to usual methods. In this work, an improved lattice Boltzmann model for phase transition flow will be introduced. First, the state of art for Shan and Chen (SC) type of LBM will be reminded. Then, link to real thermodynamics will be established with Maxwell equal areas construction. Convergence to isothermal liquid vapor equilibrium will be shown and discussed. Inclusion of an equation of state for real fluid and better incorporation of force term is presented. Multi-range interactions have been used for SC model, but it hasn't been yet applied to real fluid with non-ideal equation of state. In this work, we evaluate this model when it is applied to real liquid-vapor equilibrium. We show that important differences are found for evaluation of gas density. In order to recover thermodynamic consistency, we use a new scheme for calculation of force term, which is a combination of multi range model and numerical weighting used by Gong and Cheng. We show the superiority of our new model by studying convergence to equilibrium values over a large temperature range. We prove that spurious velocities remaining at equilibrium are decreased.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

A Study of the γ-Radiolysis of N,N-Didodecyl-N',N'-Dioctyldiglycolamide Using UHPLC-ESI-MS Analysis

In this paper, solutions of N,N-didodecyl-N',N'-dioctyldiglycolamide in n-dodecane were subjected to γ-irradiation in the presence and absence of both an aqueous nitric acid phase and air sparging. The solutions were analyzed using ultra-high-performance liquid chromatography-electrospray ionization-mass spectrometry (UHPLC-ESI-MS) to determine the rates of radiolytic decay of the extractant as well as to identify radiolysis products. The DGA concentration decreased exponentially with increasing dose, and the measured degradation rate constants were uninfluenced by the presence or absence of acidic aqueous phase, or by air sparging. Finally, the identified radiolysis products suggest that the bonds most vulnerable to radiolytic attack are those in the diglycolamide center of these molecules and not in the side chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Waste Acceptance Testing of Secondary Waste Forms: Cast Stone, Ceramicrete and DuraLith

To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions has initiated secondary-waste-form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is conducting tests on four candidate waste forms to evaluate their ability to meet potential waste acceptance criteria for immobilized secondary wastes that would be placed in the IDF. All three waste forms demonstrated compressive strengths above the minimum 3.45 MPa (500 psi) set as a target for cement-based waste forms. Further, none of the waste forms showed any significant degradation in compressive strength after undergoing thermal cycling (30 cycles in a 10 day period) between -40 C and 60 C or water immersion for 90 days. The three leach test methods are intended to measure the diffusion rates of contaminants from the waste forms. Results are reported in terms of diffusion coefficients and a leachability index (LI) calculated based on the diffusion coefficients. A smaller diffusion coefficient and a larger LI are desired. The NRC, in its Waste Form Technical Position (NRC 1991), provides recommendations and guidance regarding methods to demonstrate waste stability for land disposal of radioactive waste. Included is a recommendation to conduct leach tests using the ANS 16.1 method. The resulting leachability index (LI) should be greater than 6.0. For Hanford secondary wastes, the LI > 6.0 criterion applies to sodium leached from the waste form. For technetium and iodine, higher targets of LI > 9 for Tc and LI > 11 for iodine have been set based on early waste-disposal risk and performance assessment analyses. The results of these three leach tests conducted for a total time between 11days (ASTM C1308) to 90 days (ANS 16.1) showed: (1) Technetium diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that all the waste forms had leachability indices better than the target LI > 9 for technetium; (2) Rhenium diffusivity: Cast Stone 2M specimens, when tested using EPA 1315 protocol, had leachability indices better than the target LI > 9 for technetium based on rhenium as a surrogate for technetium. All other waste forms tested by ANSI/ANS 16.1, ASTM C1308, and EPA 1315 test methods had leachability indices that were below the target LI > 9 for Tc based on rhenium release. These studies indicated that use of Re(VII) as a surrogate for 99Tc(VII) in low temperature secondary waste forms containing reductants will provide overestimated diffusivity values for 99Tc. Therefore, it is not appropriate to use Re as a surrogate 99Tc in future low temperature waste form studies. (3) Iodine diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that the three waste forms had leachability indices that were below the target LI > 11 for iodine. Therefore, it may be necessary to use a more effective sequestering material than silver zeolite used in two of the waste forms (Ceramicrete and DuraLith); (4) Sodium diffusivity: All the waste form specimens tested by the three leach methods (ANSI/ANS 16.1, ASTM C1308, and EPA 1315) exceeded the target LI value of 6; (5) All three leach methods (ANS 16.1, ASTM C1308 and EPA 1315) provided similar 99Tc diffusivity values for both short-time transient diffusivity effects as well as long-term ({approx}90 days) steady diffusivity from each of the three tested waste forms (Cast Stone 2M, Ceramicrete and DuraLith). Therefore, any one of the three methods can be used to determine the contaminant diffusivities from a selected waste form.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Results for the Fourth Quarter Calendar Year 2015 Tank 50H Salt Solution Sample

In this memorandum, the chemical and radionuclide contaminant results from the Fourth Quarter Calendar Year 2015 (CY15) sample of Tank 50H salt solution are presented in tabulated form. The Fourth Quarter CY15 Tank 50H samples were obtained on October 29, 2015 and received at Savannah River National Laboratory (SRNL) on October 30, 2015. The information from this characterization will be used by Defense Waste Processing Facility (DWPF) & Saltstone Facility Engineering for the transfer of aqueous waste from Tank 50H to the Salt Feed Tank in the Saltstone Production Facility, where the waste will be treated and disposed of in the Saltstone Disposal Facility. This memorandum compares results, where applicable, to Saltstone Waste Acceptance Criteria (WAC) limits and targets. Data pertaining to the regulatory limits for Resource Conservation and Recovery Act (RCRA) metals will be documented at a later time per the Task Technical and Quality Assurance Plan (TTQAP) for the Tank 50H saltstone task. The chemical and radionuclide contaminant results from the characterization of the Fourth Quarter Calendar Year 2015 (CY15) sampling of Tank 50H were requested by SRR personnel and details of the testing are presented in the SRNL Task Technical and Quality Assurance Plan.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Effect of changes of physical properties on CO2 capture solvents on its absorption rate

Concern over greenhouse gas emissions, such as CO2 from fossil fuel combustion, is leading to new regulations on fossil-fuel fired power generation facilities. Using amine-based solutions for CO2 capture in power plants is the most common method utilized industrially and studied in the laboratory environment. However, a limited number of amines are available for carbon capture research after balancing the capital cost and energy penalty. In the carbon capture process, physical properties such as viscosity, surface tension, wettability, etc. are found to play important roles in solvent performance. In this context, we are exploring an approach to enhance the CO2 capture of amine solvents by tuning the physical properties of the amine solvents by the addition of additives. These additives in the amine solution utilize controlled bubble generation to increase liquid-gas contact surface area. This method can increase mass transfer in the absorber column, specifically at the bottom where the mass transfer is limited. These additives can enhance the CO2 capture efficiency by changing the physical property of the solvent which in turn can lower the capital cost associated with the system. This work can be applied to all common aqueous amine solvent and would be of great interest to those in the CCS community.

20 FOSSIL-FUELED POWER PLANTS↗