Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Impact of Molten Gallium on the Microstructure and Corrosion Behavior of Aluminum and Uranium-Aluminum Alloys for Used Nuclear Fuel Reprocessing

Test reactors around the world utilize highly enriched uranium fuel to achieve high neutron fluxes for materials testing. Once spent, the remaining uranium is a valuable resource for subsequent fuel fabrication. However, some of these test reactor cores consist of curved plate-type fuel elements, fabricated using aluminum alloy 6061 (AA6061) cladding to encapsulate a uranium-aluminum alloy (UAlx) fuel matrix. These assemblies require non-standard reprocessing approaches for uranium recovery, as aluminum dissolves readily in acidic solutions, generating large volumes of waste and complicating downstream chemical separations. In this work, we investigate a novel chemical decladding strategy based on the interaction between AA6061/UAlx and molten gallium (Ga). Ga is known to induce severe degradation of aluminum metal through liquid metal embrittlement (LME), even at relatively low Ga concentrations. By penetrating the aluminum crystal lattice, Ga disrupts grain cohesion and facilitates fracture or dissolution of the aluminum matrix. Thermodynamic analysis of the Al–Ga binary phase diagram suggests that Ga may offer a viable pathway to selectively weaken or dissolve the AA6061 cladding, and potentially the aluminum component of the UAlx fuel matrix within. To this end, parametric experiments were performed at 50 °C and 100 °C across a range of Al–Ga atomic fractions. At lower Al fractions, the AA6061 was completely molten after 2 hours of exposure to the Ga metal. In contrast, samples with higher Al fractions (0.9 Al, 0.1 Ga) contained residual solids after 2 hours, which were characterized by microstructural examination using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). These Al-Ga compositions were also evaluated using FactSage thermodynamic modeling to further elucidate the relationship between phase diagram behavior and LME.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing

As modern energy storage needs become more demanding, the manufacturing of lithium-ion batteries (LIBs) represents a sizable area of growth of the technology. Specifically, wet processing of electrodes has matured such that it is a commonly employed industrial technique. Despite its widespread acceptance, wet processing of electrodes faces a number of problems, including expensive and dangerous solvent recovery, cut-off waste, coating inconsistencies, and microstructural defects due to the solvent drying process. This review considers each of these issues and discusses which electrode slurry properties should be considered when optimizing wet slurry fabrication. Simultaneously, methods to replace traditional wet processing of electrodes are being extensively researched. Some of these novel electrode manufacturing techniques prioritize solvent minimization, while others emphasize boosting energy and power density by thickening the electrode and, subsequently, creating an organized pore structure to permit faster ion diffusion. This review contemplates the advantages and disadvantages of each of these approaches and provides a comprehensive outlook on the future of electrode manufacturing.

25 ENERGY STORAGE↗

Effect of convection on the microstructure of a lamellar eutectic growing with a stepped interface

A two dimensional model developed to study the influence of convective flow on the concentration field ahead of a growing lamellar eutectic is described when one phase projects out into the melt creating a stepped interface. The two dimensional convective flow field, which is periodic in the horizontal direction, was computed numerically using the software FLUENT. The velocity field generated due to the flow of melt over the steps was then incorporated into a finite difference scheme employed to solve the concentration field. The average interfacial composition was calculated and converted to lamellar spacing using the Jackson and Hunt minimum supercooling criterion. It was found that a stepped interface is more sensitive to convection than a planar interface.

Seth, Jayshree↗

Effect of convection on the microstructure of a lamellar eutectic growing with a stepped interface

A two dimensional model developed to study the influence of convective flow on the concentration field ahead of a growing lamellar eutectic is described when one phase projects out into the melt creating a stepped interface. The two dimensional convective flow field, which is periodic in the horizontal direction, was computed numerically using the software FLUENT. The velocity field generated due to the flow of melt over the steps was then incorporated into a finite difference scheme employed to solve the concentration field. The average interfacial composition was calculated and converted to lamellar spacing using the Jackson and Hunt minimum supercooling criterion. It was found that a stepped interface is more sensitive to convection than a planar interface.

Seth, Jayshree↗

Effect of tailored martensitic transformation in a thick weld: Residual stresses mitigation, heterogeneous microstructure, and mechanical properties

The residual stresses, microstructural heterogeneities, and mechanical properties were extensively examined in a 25 mm thick weld consisting of two regions which respectively undergo phase transformation at relatively low (100 °C) temperature (LTT) and high (670 °C) temperature (HTT) during cooling. Due to the LTT martensitic transformation, which features a transformation strain of ~4000 με, large compressive residual stress (−510 MPa) was generated as confirmed by neutron diffraction and contour method. Meanwhile, significant heterogeneities were observed in terms of the chemical composition, yield strength, and microhardness across the interface between the LTT and HTT regions. The dependency of martensitic transformation starting temperature (M{sub s}) on chemical composition is empirically formulated, and it reveals that the dependency of M{sub s} on the Ni and Cr compositions becomes stronger when the temperature is lower than 200 °C. The maximum change of residual stresses (σ{sub x}{sup max}) exponentially decreases as M{sub s} decreases in the manner of σ{sub x}{sup max} = 97.5 exp(M{sub s}/227)-649. The fracture behavior was found highly dependent upon the volume fraction of retained austenite influenced by M{sub s}. While a ductile fracture mode was found in the cellular LTT region containing relatively higher amount of retained austenite (~10%), the interface shows transgranular brittle fracture features and sub-cracking due to the relatively small amount of retained austenite and the predominant martensite constituent.

36 MATERIALS SCIENCE↗

Atom probe tomography characterization of ion and neutron irradiated Alloy 800H

Alloy 800H is a high temperature and creep resistant alloy, and is considered as a candidate alloy for use in Generation IV nuclear reactor systems. To clarify the alloy's behavior under irradiation, samples were subjected to single ion irradiations up to 20 dpa at 440°C, a dual ion/He irradiation to 17 dpa at 460°C, and a neutron irradiation to 17 dpa at 385°C. The irradiated microstructures were characterized using atom probe tomography to complement previously published transmission electron microscopy studies. Additionally, after single ion irradiation, sparse fine Al and Ti clusters were observed after 1dpa, while high number densities of nanoscale Ni-Al-Ti clusters, Cr-Ti rich carbides, and Si-decorated dislocation loops developed after 10 and 20 dpa. The microstructure formed during single ion irradiation exhibited a strong depth dependence. No significant differences were observed between the single and dual ion irradiations. While Ni-Al-Ti clusters, Cr-Ti rich carbides, and Si-decorated dislocation loops were also observed after neutron irradiation, the neutron-irradiated microstructure differed from those found in the ion-irradiated samples.

36 MATERIALS SCIENCE↗

Void swelling of conventional and composition engineered HT9 alloys after high-dose self-ion irradiation

Ferritic/martensitic (F/M) steels are being considered as potential structural materials for next generation nuclear reactors, and variants of the alloy HT9 are some of the most promising candidates. In this study, two conventional and two composition engineered HT9 alloys were irradiated using 3.5 MeV Fe 2+ up to 600 peak displacement-per-atom (dpa) at 450 °C. Void swelling and microstructure evolution were characterized for each alloy and compared. The two conventional HT9 alloys (INL and ACO3) showed similar void swelling behavior due to their similar elemental composition and processing conditions. The INL HT9 exhibited a maximum of 2.4% swelling and the ACO3 HT9 showed a maximum of 2.8% swelling at 342 and 393 average local dpa, respectively. On the other hand, the two-composition engineered HT9 alloys with varying N contents (10 ppm for low N and 440 ppm for high N) showed disparate swelling behavior. The low N HT9 exhibited a maximum of 4.6% swelling, while the high N HT9 showed a maximum of 0.7% swelling at 342 average local dpa. Changes in the N content also affected Ni/Si rich G-phase formation. The low N HT9 showed a larger size and lower density of G-phase precipitates compared with the high N HT9 after 600 peak dpa irradiation. This study compares the void swelling behavior of the ion irradiated four current HT9 alloys to extremely high doses, with the void swelling data from neutron irradiated HT9 alloys. Furthermore, the comparison lends critical insights into how well these current alloys can withstand high neutron fluxes in future reactors, especially since the low N and high N HT9 alloys have never been exposed to such high doses before.

36 MATERIALS SCIENCE↗

Rinse-Free, Sodium-Efficient Synthesis of O3-Type Layered Oxide Materials Enabled by Acetate Precursors

Sodium-ion batteries (SIBs) are a sustainable alternative to lithium-ion systems for global electrification, with O3-type layered oxide cathodes offering high specific capacity and feasibility of scalable synthesis. Industrial co-precipitation synthesis of these cathodes typically uses transition metal sulfates, requiring extensive water rinsing to remove Na 2 SO 4 impurities, a process that consumes significant water and risks residual inactive phases if incomplete. Here, this work introduces a rinse-free, resource-efficient approach using metal acetate precursors. Residual sodium acetate in non-rinsed precursors decomposes during sintering to generate Na 2 CO 3 in situ, partially substituting an external sodium resource (e.g., NaOH and Na 2 CO 3 ) and reducing its consumption by ∼18–20%. Phase-pure O3-Na 1.0 Ni 1/3 Fe 1/3 Mn 1/3 O 2 (NFM111) cathodes synthesized via this method exhibit microstructure and electrochemical performance comparable to rinsed sulfate-derived counterparts, with initial capacities of 141 mAh g −1 at C/20 (7.5 mA g −1 ). By eliminating rinsing and minimizing sodium reagent use, this acetate-based route enhances sustainability and scalability of layered oxide production for SIBs.

acetate vs. sulfate↗

Simulation of electrical conduction in thin polycrystalline metallic films: Impact of microstructure

We examine the impact of microstructural features on the electrical conductivity of a thin metallic film using Monte Carlo simulation. In particular, we obtain the dependence of the conductivity (in the absence of surface scattering) on average grain size and electron scattering mechanisms, the latter parametrized by a transmission coefficient, for a model polycrystal generated by a Voronoi tessellation. We find that the conductivity can be described in limiting cases in terms of either a simplified hopping model or a trapping model. Finally, we compare our results with the Mayadas-Shatzkes model of grain-boundary scattering and with experimental resistivity measurements for polycrystalline copper thin films.

36 MATERIALS SCIENCE↗

Enhanced van der Waals epitaxy of germanium by out-of-plane dipole moment induced from transferred graphene on TiN/AlN multilayers

We report recent advances in 3D/2D heterostructures have opened up tremendous opportunities in building highly flexible and durable optoelectronic devices. However, the inherit lack of interfacial bonding and low surface energy of van der Waals surfaces limit the nucleation and growth of 3D materials. Enhancing wettability by providing a porous buffer is effective in growing compound semiconductors on graphene while van der Waals epitaxy of Ge remains challenging. Here, the nucleation of Ge has been significantly improved from an islanded mode to granular modes by using a TiN/AlN multilayered buffer prior to Ge/graphene integration. Highly textured Ge growth with dominating (111), (220), and (311) peaks are identified by x-ray diffraction. The microstructure of the buffer TiN/AlN demonstrates a polycrystalline quality with clean interfaces between each interlayer and the substrate. Kelvin probe force microscopy measurements along the lateral TiN/AlN interface identify a potential drop corresponding to the AlN phase. This contact potential difference between TiN and AlN is the key in generating the out-of-plane dipole moment that modifies the surface energy of the monolayer graphene, resulting in enhanced wettability of the Ge adatoms nucleated on top. Surface dipole induced nucleation of 3D semiconductor thin films on 2D materials via the proper design of buffer layer is fundamentally important to enhance the 3D/2D growth toward flexible optoelectronic applications.

36 MATERIALS SCIENCE↗

Neutron Characterization of 3D Printed Gas Turbine Alloy With Internal Cooling Structure

The objective of this research work is to investigate the residual strains induced by the presence of a exit hole and internal hollow geometry present in a 3D printed IN718 similar to that seen in a gas turbine blade. The specimens were manufactured with an internal hollow structure that ended with an exit hole, and fabricated by direct metal laser sintering additive manufacturing technique. Using this technique, metal powder was melted by a laser source and rapidly cooled to form the part layer by layer. Rapid heating and cooling generate large thermal gradients and residual stresses in the 3D printed material. To be aligned with industry standards, specimens were heat-treated to relieve most of the residual stresses as well as to investigate whether IN718 still preserved a nonhomogeneous stress state after the thermal treatment. Roughness and microstructure analysis was performed to understand the heat-treated sample properties. To investigate the volumetric residual strain, the neutron diffraction technique was used with a definite neutron wavelength. Bragg’s law was used to determine lattice spacing. Interplanar lattice spacing and stress-free state lattice spacings were measured to calculate the strains. Residual strains were measured in the x and y direction to understand the impact of the presence of a exit hole and internal hollow geometry. The results of volumetric residual strain in the x and y directions showed no significant variations in the distribution of the strain due to the presence of a hollow structure as well as the exit hole. Overall, no significant stress concentration was observed in the heat treated sample. Sample geometry, instrumentation for neutron diffraction, and material properties are discussed in detail in this paper.

Raju, Nandhini↗

Creep and Creep Fracture Modeling with Surrogate Creep Models and the Extended Finite Element Method

Alloy components in advanced nuclear reactors will be subjected to environmental conditions that could include high temperatures, irradiation, and exposure to corrosive salts. These conditions could lead to the formation of crack-like defects, which could grow over time in a mechanism known as creep crack growth (CCG). Predicting growth rates of these defects is important for assessing the safe operating life of advanced reactors. This project documents progress toward developing and testing next-generation data-driven constitutive models for deformation creep. It also documents the application of the extended finite element method in conjunction with surrogate creep models to predict CCG parameters under a variety of conditions. These important incremental developments contribute to the longer-term objective of developing microstructure-aware constitutive models that can be used for predicting creep deformation and CCG at the component scale with improved accuracy.

36 MATERIALS SCIENCE↗

Influence of convection on microstructure

The influence was studied of convection during directional solidification on the resulting microstructure of eutectics, specifically lead/tin and manganese/bismuth. A theory was developed for the influence of convection on the microstructure of lamellar and fibrous eutectics, through the effect of convection on the concentration field in the melt in front of the growing eutectic. While the theory agrees with the experimental spin-up spin-down results, it predicts that the weak convection expected due to buoyancy will not produce a measurable change in eutectic microstructure. Thus, this theory does not explain the two fold decrease in MnBi fiber size and spacing observed when MnBi-Bi is solidified in space or on Earth with a magnetic field applied. Attention was turned to the morphology of the MnBi-Bi interface and to the generation of freezing rate fluctuations by convection. Decanting the melt during solidification of MnBi-Bi eutectic showed that the MnBi phase projects into the melt ahead of the Bi matrix. Temperature measurements in a Bi melt in the vertical Bridgman-Stockbarger configuration showed temperature variations of up to 25 C. Conclusions are drawn and discussed.

Wilcox, William R.↗

The fracture resistance of 1420 and 1421 Al-Mg-Li alloys

The resistance to stable crack growth in 1420-T6 (Al-5Mg-2.1Li-0.1Zr-0.01Sc, less than 0.06Fe, in wt pct) and 1421-T6 (Al-4.7Mg-1.9Li-0.09Zr-0.2Sc, less than 0.06Fe) Al-Mg-Li alloys was investigated, based on the R curves generated in accordance with ASTM E561-86 and fractography analyses. The crack resistance of 1420 and 1421 alloys was found to be comparable to that of the conventional Space Shuttle External Tank Al alloy, 2219-T87. The main differences in the fracture behaviors arose from differences in the alloys' microstructures. In the case of 1420 alloy, a slightly enhanced toughness behavior was observed, due to the T-phase precipitates, which may have promoted more homogeneous deformation and enhanced microvoid coalescence. In the case of 1421 alloy, the addition of Sc led to a refined grain size and resulted in slightly reduced toughness.

Birt, M. J.↗

Modeling of Ultrasonically Generated Liquid-Liquid Dispersions During Controlled Directional Solidification

There are innumerable two-component systems in which two very different liquid phases co-exist in equilibrium over a range of temperature and composition, e.g., oil and water, salt fluxes and solders, aluminum and lead. Often it is of practical concern to fabricate a solid component consisting of a uniform dispersion of one phase in the other. Unfortunately, uniform microstructural development during solidification of two immiscible liquids is hampered by inherent, often large, density differences between the phases that lead to severe segregation. Uniformity is also compromised by preferential wetting and coalescence phenomena. It is, however, well known that ultrasonic energy can initiate and maintain a fine liquid-liquid dispersion. The work presented here extends that observation by application of ultrasonic energy to promote uniform phase incorporation during controlled directional solidification. To this end experiments with the transparent organic, immiscible, succinonitrile-glycerol system were conducted and the numerous processing parameters associated with this technique were evaluated in view of optimizing dispersion uniformity. In view of the initial experimental results a model that predicts the dispersed liquid droplet size as a function of material properties, sample geometry, and applied energy has been developed. In the mathematical model we consider the ultrasonic field in an experimental ampoule of length L and diameter D induced by a probe having a vibration frequency of f=2OKhz (circular frequency omega = 2 pi f). The amplitude is adjustable from A=65 to 13Omicrons. The probe tip diameter is d, the liquid has a density of p, in which the speed of sound and surface tension are, respectively, c and sigma. The mathematical model and numerical investigation for the experiments [1] is done using the following assumptions: (i) The droplet size is small in comparison to the sound wave length; (ii) The forces between droplets are neglected (relative concentration is small); (iii) The droplet is stable if the kinetic energy, E(sub K), of the liquid motion due to ultrasonic field influence is less then the binding energy, E(sub S), due to the surface tension (it is easy to show that the surface energy of two droplets resulting from one is larger by about a factor of two.); (iv) The stability limit is characterized by E(sub S) to approx. E(sub K).

Grugel, R. N.↗

Deep-learning based artificial intelligence tool for melt pools and defect segmentation

Accelerating fabrication of additively manufactured components with precise microstructures is important for quality and qualification of built parts, as well as for a fundamental understanding of process improvement. Accomplishing this requires fast and robust characterization of melt pool geometries and structural defects in images. This paper proposes a pragmatic approach based on implementation of deep learning models and self-consistent workflow that enable systematic segmentation of defects and melt pools in optical images. Deep learning is based on an image-to-image translation–conditional generative adversarial neural network architecture. An artificial intelligence (AI) tool based on this deep learning model enables fast and incrementally more accurate predictions of the prevalent geometric features, including melt pool boundaries and printing-induced structural defects. We present statistical analysis of geometric features that is enabled by the AI tool, showing strong spatial correlation of defects and the melt pool boundaries. The correlations of widths and heights of melt pools with dataset processing parameters show the highest sensitivity to thermal influences resulting from laser passes in adjacent and subsequent layer passes. The presented models and tools are demonstrated on the aluminum alloy and datasets produced with different sets of processing parameters. However, they have universal quality and could easily be adapted to different material compositions. The method can be easily generalized to microstructural characterizations other than optical microscopy.

additive manufacturing↗

Engineering the Thermoelectric Transport in Half-Heusler Materials through a Bottom-Up Nanostructure Synthesis

Half-Heusler (HH) alloys are among the best promising thermoelectric (TE) materials applicable for the middle-to-high temperature power generation. Despite of the large thermoelectric power factor and decent figure-of-merit ZT (≈1), their broad applications and enhancement on TE performance are limited by the high intrinsic lattice thermal conductivity (κ L ) due to insufficiencies of phonon scattering mechanisms, and the fewer powerful strategies associated with the microstructural engineering for HH materials. This study reports a bottom-up nanostructure synthesis approach for these HH materials based on the displacement reaction between metal chlorides/bromides and magnesium (or lithium), followed by vacuum-assisted spark plasma sintering process. The samples are featured with dense dislocation arrays at the grain boundaries, leading to a minimum κ L of ≈1 W m -1 K -1 at 900 K and one of the highest ZT (≈1) and predicted η (≈11%) for n-type Hf 0.25 Zr 0.75 NiSn 0.97 Sb 0.03 . Further manipulation on the dislocation defects at the grain boundaries of p-type Nb 0.8 Ti 0.2 FeSb leads to enhanced maximum power factor of 47 × 10 -4 W m -1 K -2 and the predicted η of ≈7.5%. Moreover, vanadium substitution in FeNb 0.56 V 0.24 Ti 0.2 Sb significantly promotes the η to ≈11%. This strategy can be extended to a broad range of advanced alloys and compounds for improved properties.

36 MATERIALS SCIENCE↗

Data Science Techniques, Assumptions, and Challenges in Alloy Clustering and Property Prediction

Data analytics methods have been increasingly applied to understanding materials chemistry, processing due to the manufacturing approach, and uni-axial and cyclic property relationships in the highly complex space of alloy design. There are several benefits to applying data analytics to this space, including the ability to manage non-linearities in the responses of the alloy attributes and the resulting mechanical properties. However, key difficulties in applying and understanding the results of data analytics include the often lack of reported assumptions and data processing steps necessary to improve interpretation and reproducibility in derived results. In this work, the methods used to generate clustering and correlation analyses for experimental 9% Cr ferritic-martensitic steel data were investigated and the resulting implications for mechanical property predictions were assessed. This work uses principal component analysis, partitioning around medoids, t-SNE, and k-means clustering to investigate trends in composition, processing and microstructure information with creep and tensile properties, building on work done previously using a smaller version of the same dataset. The initial assumptions, preprocessing steps and methods are investigated and outlined in order to depict the fine level of detail required to convey the steps taken to process data and produce analytical results. Here, the variations in the resulting analyses are explored due to the influence of new and more varied data.

36 MATERIALS SCIENCE↗