Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A non-destructive method for crack quantification in photovoltaic backsheets under accelerated and real-world exposures

The long-term durability of photovoltaic modules is paramount for the continued growth of the industry. Polymer backsheets are of particular concern since they provide electrical insulation and an environmental barrier. In this paper, 23 freestanding, multilayer backsheets with nine unique material combinations underwent four different weathering exposures under accelerated and real-world conditions. Besides changes in color and gloss, the induced degradation included parallel or mudflat cracks on 11 backsheets, sometimes in combination with delamination or blistering. Similar degradation has been observed in previous studies and is concerning since cracks compromise the mechanical integrity and electrical safety of backsheets. Quantitative parameters are desirable to reliably classify categories of cracks and supply unbiased features for statistical analysis in predictive lifetime models. We developed an analysis technique that utilizes surface profilometry data to quantify the depth, width, area, spacing, and number of cracks. Parameters are automatically extracted from the raw data by an algorithm running on a high performance distributed computing cluster. Our algorithm excelled at characterizing parallel cracks with minimal de-adhesion, and only an estimated 4% of crack detections were false positives. The addition of humidity and temperature variation formed up to three times as many cracks on a photodose basis compared to dry, constant temperature exposures. Cracks in real-world and accelerated exposures propagated to similar depths with equivalent photodoses; however, the number of cracks formed in accelerated exposures was far greater on a photodose basis. Of samples that cracked, the best performing backsheet configuration was polyvinyl fluoride/poly (ethylene-terephthalate)/polyethylene (PVF/PET/PE) while the least durable was PET/PET/ethylene-vinyl acetate. Finally, none of the six PVF/PET/PVF backsheets cracked in any of the exposures.

14 SOLAR ENERGY↗
DOE OSTI2020

GronOR: Massively Parallel and GPU-Accelerated Non-Orthogonal Configuration Interaction for Large Molecular Systems

GronOR is a program package for non-orthogonal configuration interaction calculations for an electronic wave function built in terms of anti-symmetrized products of multi-configuration molecular fragment wave functions. The two-electron integrals that have to be processed may be expressed in terms of atomic orbitals or in terms of an orbital basis determined from the molecular orbitals of the fragments. The code has been specifically designed for execution on distributed memory massively parallel and Graphics Processing Unit (GPU)-accelerated computer architectures, using an MPI+OpenACC/OpenMP programming approach. The task-based execution model used in the implementation allows for linear scaling with the number of nodes on the largest pre-exascale architectures available, provides hardware fault resiliency, and enables effective execution on systems with distinct central processing unit-only and GPU-accelerated partitions. The code interfaces with existing multi-configuration electronic structure codes that provide optimized molecular fragment orbitals, configuration interaction coefficients, and the required integrals. Algorithm and implementation details, parallel and accelerated performance benchmarks, and an analysis of the sensitivity of the accuracy of results and computational performance to thresholds used in the calculations are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Planar Collisionless Shock Simulations with the Semi-implicit Particle-in-cell Model FLEKS

This study investigates the applicability of the semi-implicit particle-in-cell code FLexible Exascale Kinetic Simulator (FLEKS) to heliospheric shock simulations. We examine one- and two-dimensional local planar shock simulations, initialized using MHD states with upstream conditions representative of plasmas in the hypersonic, β ∼ 1 regime, for both quasi-perpendicular and quasi-parallel configurations. The refined algorithm in FLEKS proves robust, enabling accurate shock simulations with a grid resolution on the order of the electron inertial length d e . Our simulations successfully capture key shock features, including shock structures (foot, ramp, overshoot, and undershoot), upstream and downstream waves (fast magnetosonic, whistler, Alfvén ion-cyclotron, and mirror modes), and non-Maxwellian particle distributions. Crucially, we find that at least two spatial dimensions are critical for accurately reproducing downstream-wave physics in quasi-perpendicular shocks and capturing the complex dynamics of quasi-parallel shocks, including surface rippling, shocklets, short, large-amplitude magnetic structures, magnetic reconnection, and jets. Furthermore, our parameter studies demonstrate the impact of mass ratio and grid resolution on shock physics. This work provides valuable guidance for selecting appropriate physical and numerical parameters for shock simulations using a semi-implicit PIC method, paving the way for incorporating kinetic shock processes into large-scale collisionless plasma simulations with the MHD-AEPIC model.

plasma astrophysics↗
DOE OSTI2011

A Highly Parallel Implementation of K-Means for Multithreaded Architecture

We present a parallel implementation of the popular k-means clustering algorithm for massively multithreaded computer systems, as well as a parallelized version of the KKZ seed selection algorithm. We demonstrate that as system size increases, sequential seed selection can become a bottleneck. We also present an early attempt at parallelizing k-means that highlights critical performance issues when programming massively multithreaded systems. For our case studies, we used data collected from electric power simulations and run on the Cray XMT.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS1990

Assignment Of Finite Elements To Parallel Processors

Elements assigned approximately optimally to subdomains. Mapping algorithm based on simulated-annealing concept used to minimize approximate time required to perform finite-element computation on hypercube computer or other network of parallel data processors. Mapping algorithm needed when shape of domain complicated or otherwise not obvious what allocation of elements to subdomains minimizes cost of computation.

Salama, Moktar A.↗
DOE OSTI2014

Block-Iterative Methods for 3D Constant-Coefficient Stencils on GPUs and Multicore CPUs

Block iterative methods are extremely important as smoothers for multigrid methods, as preconditioners for Krylov methods, and as solvers for diagonally dominant linear systems. Developing robust and efficient smoother algorithms suitable for current and evolving GPU and multicore CPU systems is a significant challenge. We address this issue in the case of constant-coefficient stencils arising in the solution of elliptic partial differential equations on structured 3D uniform and adaptively refined block structured grids. Robust, highly parallel implementations of block Jacobi and chaotic block Gauss-Seidel algorithms with exact inversion of the blocks are developed using different parallelization techniques. Experimental results for NVIDIA Fermi/Kepler GPUs and AMD multicore systems are presented.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1990

On the parallel efficiency of the Frederickson-McBryan multigrid

To take full advantage of the parallelism in a standard multigrid algorithm requires as many processors as points. However, since coarse grids contain fewer points, most processors are idle during the coarse grid iterations. Frederickson and McBryan claim that retaining all points on all grid levels (using all processors) can lead to a superconvergent algorithm. The purpose of this work is to show that the parellel superconvergent multigrid (PSMG) algorithm of Frederickson and McBryan, though it achieves perfect processor utilization, is no more efficient than a parallel implementation of standard multigrid methods. PSMG is simply a new and perhaps simpler way of achieving the same results.

Decker, Naomi H.↗
NASA NTRS2008

Parallel Implementation of the Recursive Approximation of an Unsupervised Hierarchical Segmentation Algorithm

The hierarchical image segmentation algorithm (referred to as HSEG) is a hybrid of hierarchical step-wise optimization (HSWO) and constrained spectral clustering that produces a hierarchical set of image segmentations. HSWO is an iterative approach to region grooving segmentation in which the optimal image segmentation is found at N(sub R) regions, given a segmentation at N(sub R+1) regions. HSEG's addition of constrained spectral clustering makes it a computationally intensive algorithm, for all but, the smallest of images. To counteract this, a computationally efficient recursive approximation of HSEG (called RHSEG) has been devised. Further improvements in processing speed are obtained through a parallel implementation of RHSEG. This chapter describes this parallel implementation and demonstrates its computational efficiency on a Landsat Thematic Mapper test scene.

Tilton, James C.↗
DOE OSTI2022

Parallel simulated annealing with embedded machine learning and multifidelity models for reactor core design

This paper presents extensions to a penalty-free, parallel simulated annealing (SA) algorithm for multi-constrained combinatorial optimization with the aim of embedding multi-fidelity physics models into the annealing procedure. The method uses a low-fidelity, quickly executing model for rapid design space exploration and a high-fidelity model for detailed constraint resolution and on-the-fly bias correction. Machine learning models updated within the annealing procedure were used to bridge the gap between the multi-fidelity models, which led to accurate rapid exploration and efficient detailed constraint resolution. A software implementation of the new multi-fidelity optimization methods, called ML-PSA, was demonstrated on a continuous multi-fidelity optimization problem and a constrained combinatorial PWR lattice design problem. These problems demonstrate some of the features, parallel performance characteristics, and extensible nature of the multi-fidelity SA methods. This paper shows that the developed software and procedure are a general optimization tool that can be applied to a wide variety of scientific and engineering design optimization applications. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1993

Dynamic programming on a shared-memory multiprocessor

Three new algorithms for solving dynamic programming problems on a shared-memory parallel computer are described. All three algorithms attempt to balance work load, while keeping synchronization cost low. In particular, for a multiprocessor having p processors, an analysis of the best algorithm shows that the arithmetic cost is O(n-cubed/6p) and that the synchronization cost is O(absolute value of log sub C n) if p much less than n, where C = (2p-1)/(2p + 1) and n is the size of the problem. The low synchronization cost is important for machines where synchronization is expensive. Analysis and experiments show that the best algorithm is effective in balancing the work load and producing high efficiency.

Edmonds, Phil↗
DOE OSTI2019

Ab Initio Computation of Rotationally-Averaged Pump–Probe X-ray and Electron Diffraction Signals

We develop a new algorithm for the computation of the rotationally averaged elastic molecular diffraction signal for the cases of perpendicular or parallel pump–probe geometries. The algorithm first collocates the charge density from an arbitrary ab initio wave function onto a Becke quadrature grid [A. Becke, J. Chem. Phys. 1988, 88, 2457], providing a high-fidelity multiresolution representation of the charge density. A double sum is then performed over the Becke grid points, and the interaction between points computed using the scattering kernels of Williamson and Zewail [J. C. Williamson and A. H. Zewail, J. Phys. Chem. 1994, 98, 2766]. These kernels analytically average over the molecular orientations with the cos 2 γ selection factor appropriate for one-photon dipole absorption in a perpendicular pump–probe geometry. We demonstrate that the method is converged with small grids containing <500 points/atom. We implement the algorithm on a GPU for increased efficiency and emonstrate the algorithm for molecules with up to a few dozen atoms. We explore the accuracy of the independent atom model (IAM) by comparison with our new and more accurate method. We also investigate the possibility of detecting signatures of electronic transitions in polyatomic pump–probe diffraction experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Application of data flow concepts to a multigrid solver for the Euler equations

In this study a multigrid solver for Euler equations (FLO52R) was examined to determine its performance potential on a hypothetical computer using a data flow architecture. The proposed computer would require massive parallelism to realize its design performance. On the other hand this parallelism would be more easily realized than with a conventional vector processor such as the Cray-1S. Several changes to the proposed design substantially alleviated most of the remaining bottlenecks to parallel processing. Other changes allowed clearer definition of memory access and disk I/O. Finally, a portion of the algorithm was rewritten to improve parallel performance. With these changes, performance levels approaching that of a Cray-1S may be possible for a computer costing far less. Estimates are given for overall speed, memory, and network bandwidth, and for instruction memory requirements.

Merriam, M. L.↗
NASA NTRS2021

An Efficient and Accurate Algorithm for Computing Grid-Averaged Solar Fluxes for Horizontally Inhomogeneous Clouds

A computationally efficient method is presented to account for the horizontal cloud inhomogeneity by using a radiatively equivalent plane parallel homogeneous (PPH) cloud. The algorithm can accurately match the calculations of the reference (rPPH) independent column approximation (ICA) results, but use only the same computational time required for a single plane parallel computation. The effective optical depth of this synthetic sPPH cloud is derived by exactly matching the direct transmission to that of the inhomogeneous ICA cloud. The ffective9 scattering asymmetry factor is found from a pre-calculated albedo inverse look-up-table that is allowed to vary over the range from -1.0 to 1.0. In the special cases of conservative scattering and total absorption, the synthetic method is exactly equivalent to the ICA, with only a small bias (about 0.2% in flux) relative to ICA due to imperfect interpolation in using the look-up tables. In principle, the ICA albedo can be approximated accurately regardless of cloud inhomogeneity. For a more complete comparison, the broadband shortwave albedo and transmission calculated from the synthetic sPPH cloud and averaged over all incident directions, have the RMS biases of 0.26% and 0.76%, respectively, for inhomogeneous clouds over a wide variation of particle size. The advantages of the synthetic PPH method are that (1) it is not required that all the cloud subcolumns have uniform microphysical characteristic, (2) it is applicable to any 1D radiative transfer scheme, and (3) it can handle arbitrary cloud optical depth distributions and an arbitrary number of cloud subcolumns with uniform computational efficiency.

cloud inhomogeneity↗
DOE OSTI2023

High-Level Synthesis of Irregular Applications: A Case Study on Influence Maximization

The Influence Maximization problem is the problem of identifying a small cohort of actors from a broader population that, when initially activated in a diffusion process, are expected to result in a large number of activations in the population. While the problem is known to be NP-hard, several approximation algorithms have been devised by leveraging its submodular structure. While these algorithms are theoretically efficient, they are computationally very expensive in practice. This work advances the current state-of-the-art parallelization scheme for the IMM algorithm by devising the adoption of custom hardware accelerators implemented on FPGAs by leveraging High Level Synthesis from OpenCL. We study the performance of our proposed approach by exploring optimizations tailored at improving the parallel efficiency of the accelerators and highlight their effects and limitations in accelerating complex graph analytic applications. Our experimental evaluation shows that FPGA acceleration can improve the performance of the LT diffusion model up to 1.72x for the entire application and up to 2.90x for its most important kernel with respect to a CPU only parallel execution. The FPGA acceleration of the LT model shows also a 1.54x reduction in energy consumption when compared to a parallel CPU only run.

Neff, Reece W.↗
DOE OSTI2016

Parallel DTFE Surface Density Field Reconstruction

We improve the interpolation accuracy and efficiency of the Delaunay tessellation field estimator (DTFE) for surface density field reconstruction by proposing an algorithm that takes advantage of the adaptive triangular mesh for line-of-sight integration. The costly computation of an intermediate 3D grid is completely avoided by our method and only optimally chosen interpolation points are computed, thus, the overall computational cost is significantly reduced. The algorithm is implemented as a parallel shared-memory kernel for large-scale grid rendered field reconstructions in our distributed-memory framework designed for N-body gravitational lensing simulations in large volumes. We also introduce a load balancing scheme to optimize the efficiency of processing a large number of field reconstructions. Our results show our kernel outperforms existing software packages for volume weighted density field reconstruction, achieving ~ 10x speedup, and our load balancing algorithm gains an additional ~ 3.6x speedup at scales with ~ 16k processes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Benchmark Comparison for a Multi-Processing Ion Mobility Calculator in the Free Molecular Regime

A benchmark comparison between two ion mobility and collision cross-section (CCS) calculators, MOBCAL and IMoS, is presented here as a standard to test the efficiency and performance of both programs. Utilizing 47 organic ions, results are in excellent agreement between IMoS and MOBCAL in He and N{sub 2,} when both programs use identical input parameters. Due to a more efficiently written algorithm and to its parallelization, IMoS is able to calculate the same CCS (within 1%) with a speed around two orders of magnitude faster than its MOBCAL counterpart when seven cores are used. Due to the high computational cost of MOBCAL in N{sub 2}, reaching tens of thousands of seconds even for small ions, the comparison between IMoS and MOBCAL is stopped at 70 atoms. Large biomolecules (>10000 atoms) remain computationally expensive when IMoS is used in N{sub 2} (even when employing 16 cores). Approximations such as diffuse trajectory methods (DHSS, TDHSS) with and without partial charges and projected area approximation corrections can be used to reduce the total computational time by several folds without hurting the accuracy of the solution. These latter methods can in principle be used with coarse-grained model structures and should yield acceptable CCS results. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Recommended direct simulation Monte Carlo collision model parameters for modeling ionized air transport processes

A systematic approach for calibrating the direct simulation Monte Carlo (DSMC) collision model parameters to achieve consistency in the transport processes is presented. The DSMC collision cross section model parameters are calibrated for high temperature atmospheric conditions by matching the collision integrals from DSMC against ab initio based collision integrals that are currently employed in the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) and Data Parallel Line Relaxation (DPLR) high temperature computational fluid dynamics solvers. The DSMC parameter values are computed for the widely used Variable Hard Sphere (VHS) and the Variable Soft Sphere (VSS) models using the collision-specific pairing approach. The recommended best-fit VHS/VSS parameter values are provided over a temperature range of 1000-20 000 K for a thirteen-species ionized air mixture. Use of the VSS model is necessary to achieve consistency in transport processes of ionized gases. The agreement of the VSS model transport properties with the transport properties as determined by the ab initio collision integral fits was found to be within 6% in the entire temperature range, regardless of the composition of the mixture. The recommended model parameter values can be readily applied to any gas mixture involving binary collisional interactions between the chemical species presented for the specified temperature range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1980

Improved local linearization algorithm for solving the quaternion equations

The objective of this paper is to develop a new and more accurate local linearization algorithm for numerically solving sets of linear time-varying differential equations. Of special interest is the application of this algorithm to the quaternion rate equations. The results are compared, both analytically and experimentally, with previous results using local linearization methods. The new algorithm requires approximately one-third more calculations per step than the previously developed local linearization algorithm; however, this disadvantage could be reduced by using parallel implementation. For some cases the new algorithm yields significant improvement in accuracy, even with an enlarged sampling interval. The reverse is true in other cases. The errors depend on the values of angular velocity, angular acceleration, and integration step size. One important result is that for the worst case the new algorithm can guarantee eigenvalues nearer the region of stability than can the previously developed algorithm.

Yen, K.↗