Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Sonochemical preparation of copper sulfides with different phases in aqueous solutions

Highlights: ► Sonochemical preparation of copper sulfides in aqueous solutions is reported. ► CuS and Cu{sub 2}S nanoparticles with crystallite sizes between 7 and 18 nm were obtained. ► Crystallite size can be changed using different complexing agents. ► Thermal behavior was studied by TG and XRD measurements. - Abstract: There is a growing interest in the synthesis of nanostructured copper sulfides due to their ability to form compounds with various stoichiometries. We report a sonochemical route for the preparation of copper sulfides with different compositions in aqueous solutions, using different, general and convenient copper sources such as copper acetate, copper hydroxide or basic copper carbonate and thiourea or thioacetamide as sulfur precursors under ambient air. Phase analysis, purity and morphology of the products were studied by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The results revealed that nanoparticles of covellite, CuS, with crystallite sizes between 7 and 18 nm can be obtained by using different precursors and complexing agents and that chalcocite, Cu{sub 2}S, can also be prepared sonochemically.

36 MATERIALS SCIENCE↗

Electric conductivity analysis and dielectric relaxation behavior of the hybrid polyvanadate (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}]

Highlights: ► Plate-like crystals (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}] were synthesized. ► Frequency and temperature dependence of AC conductivity indicate CBH model. ► The temperature dependence of DC conductivity exhibits two conduction mechanisms. - Abstract: Layered hybrid compound (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}] has been synthesized via hydrothermal method. Techniques X-ray powder diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and impedance spectroscopy have been used to characterize the hybrid material. Electrical and dielectric properties dependence on both temperature and frequency of the compound have been reported. The direct current conductivity process is thermally activated and it is found to be 12.67 × 10{sup −4} Ω{sup −1} m{sup −1} at 523 K. The spectra follow the Arrhenius law with two activation energy 0.25 eV for T < 455 K and 0.5 eV for T > 455 K.

36 MATERIALS SCIENCE↗

Fabrication of nano Delafossite LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} as the new adsorbent in efficient removal of reactive blue 5 from aqueous solutions

Highlights: ► Fabrication of nano Delafossite LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} by sol–gel method. ► Kinetic study of the adsorption properties. ► Removal of reactive blue 5 (RB5) as a reactive dye by the prepared new nanocatalyst. - Abstract: In this paper, nanoparticles of delafossite-type LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} were prepared by sol–gel method in the presence of maleic acid as a chelating agent. The nanoparticles were characterized using differential thermal analysis, X-ray powder diffraction, Fourier infrared spectroscopy, transmission electron microscope, scanning electron microscopy and scanning tunneling microscopy. The nanoparticles showed the excellent adsorption properties towards reactive dye, reactive blue 5 (RB5). The adsorption studies were carried out at different pH values, various adsorbent dosages and contact time in a batch experiments. The kinetic studies indicate that the removal process obeys the second-order kinetic equation. Also, the isotherm evaluations reveal that the adsorption of RB5 by the nanoparticles follows the Freundlich model.

36 MATERIALS SCIENCE↗

Preparation of α-MnMoO{sub 4} at ultra-low temperature on an organic substrate

Highlights: ► A film of α-MnMoO{sub 4} nanorods was prepared on paper. ► The film was prepared by a solution reaction and subsequent dehydration at 220 °C. ► The average film thickness was approximately 60 μm. ► The relative permittivity of the prepared α-MnMoO{sub 4} film was 12 at 1 GHz. - Abstract: A crystalline film of α-MnMoO{sub 4} has been prepared at an ultra-low temperature of 220 °C on paper by a direct solution reaction and subsequent dehydration. First, MnMoO{sub 4}·0.9H{sub 2}O was prepared by immersing the substrate in an aqueous solution of MnCl{sub 2}, followed by spraying a determined area of the substrate with an aqueous solution of Na{sub 2}MoO{sub 4}. The ceramic film of MnMoO{sub 4}·0.9H{sub 2}O was then dehydrated at 220 °C to form a crystalline film of α-MnMoO{sub 4}. The crystal structure of the material was confirmed by X-ray powder diffraction and an average film thickness of 60 μm was measured using a profilometer. The permittivity of the film was also studied and showed a value of 12 at 1 GHz. Additionally, the low loss performance of a capacitance structure was obtained.

36 MATERIALS SCIENCE↗

Multifunctional Fe{sub 3}O{sub 4}@C@Ag hybrid nanoparticles: Aqueous solution preparation, characterization and photocatalytic activity

Highlights: ► Ag-loaded Fe{sub 3}O{sub 4}@C magnetic-optical bifunctional materials have been investigated. ► The magnetism was studied at the room temperature. ► The photocatalytic activity was evaluated under visible light irradiation. ► Ag-loaded Fe{sub 3}O{sub 4}@C nanocomposites show superior magnetism and photocatalytic activity. ► A simple synthetic process was discussed. - Abstract: The paper describes a kind of multifunctional Fe{sub 3}O{sub 4}@C@Ag hybrid nanoparticles, which can be successfully synthesized using a simple route based on directly adsorption and spontaneous reduction of silver ions onto the surface shell of carbon-coated magnetic nanoparticles. The as-prepared samples have been characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) spectrum, vibrating sample magnetometer (VSM) and UV–vis spectrum (UV–vis). The Ag nanocrystals loaded on the surface shell of carbon-coated magnetic nanoparticles are nearly spherical with an average diameter of 10 nm. And the carbonaceous polysaccharides shell obtained using an glucose hydrothermal reaction act as a role of a bridge between magnetic Fe{sub 3}O{sub 4} core and noble metallic Ag nanocrystals. The as-prepared samples can be used as an effective catalyst for the photodegradation of organic dyes (neutral red) under the exposure of visible light. Results show that the as-prepared samples have a degradation rate of 93.7% for dyes within 30 min, which indicates their high-efficiency and rapid photocatalytic activity.

36 MATERIALS SCIENCE↗

A carbon foam with a bimodal micro–mesoporous structure prepared from larch sawdust for the gas-phase toluene adsorption

Highlights: ► Network carbon foam containing a bimodal pore distribution was prepared from Larch. ► Liquefaction route was used for the preparation of morphology controllable carbon. ► Pore structure of carbon foam was controlled through KOH activation. - Abstract: A carbon foam with a bimodal micro–mesopore distribution, was prepared by submitting larch sawdust to liquefaction, resinification, foaming, carbonization and KOH activation. The morphology, pore texture and crystal microstructure was characterized by scanning and transmission electron microscopy, nitrogen adsorption analysis and X-ray powder diffraction. A honeycomb structure with adjacent cells was observed for the precursor of carbon foam. After KOH activation, the cell wall of precursor shrunk and broke. This lead to the formation of a well-connected 3D network and developed ligament pore structure (surface area of 554–1918 m{sup 2}/g) containing bimodal pores, 2.1 and 3.9 nm in diameter. The porous carbon foam prepared at 700 °C exhibited a much higher gas-phase toluene removal than commercial activated carbon fiber owing to the 3D network and bimodal pore structure.

36 MATERIALS SCIENCE↗

Influence of Fe doping on the structural, optical and acetone sensing properties of sprayed ZnO thin films

Graphical abstract: All the films are found to be polycrystalline ZnO possessing hexagonal wurtzite structure. The intensities of all the peaks are diminished strongly in the Fe-doped films, indicating their lower crystallinity as compared to the undoped ZnO film. The average crystallite size decreases from 35.21 nm (undoped sample) to 15.43 nm (1 at% Fe-doped sample). - Highlights: • Fe-doped ZnO films show smaller crystallinity with crystallite size: 15–26 nm. • Optical band gap in ZnO films decreases on Fe doping. • Fe-doped films exhibit the normal dispersion for the wavelength range 450–600 nm. • PL spectra of the Fe-doped films show quenching of the broad green-orange emission. • Acetone response of the Fe-doped films increases considerably at 300 °C. - Abstract: The ZnO thin films (undoped and Fe-doped) deposited by chemical spray pyrolysis technique have been analyzed by X-ray powder diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). Results show that all the films possess hexagonal wurtzite structure of zinc oxide having crystallite sizes in the range 15–36 nm. On 1 at% Fe doping, the surface roughness of the film increases which favors the adsorption of atmospheric oxygen on the film surface and thereby increase in the gas response. Optical studies reveal that the band gap decreases due to creation of some defect energy states below the conduction band edge, arising out of the lattice disorder in the doped films. The refractive index of the films decreases on Fe doping and follows the Cauchy relation of normal dispersion. Among all the films examined, the 1 at% Fe-doped film exhibits the maximum response (∼72%) at 300 °C for 100 ppm concentration of acetone in air.

36 MATERIALS SCIENCE↗

Controlled synthesis of snowflake-like self-assemblies palladium nanostructures under microwave irradiation

Graphical abstract: - Highlights: • We demonstrated the synthesis of snowflake-like palladium nanostructures for the first time. • We discussed the influencing factors on the synthesis of snowflake-like Pd nanostructures. • The molar ratio of H{sub 2}Pd{sub 4} to PVP at 5 is the optimal selection. • The growth process was discussed. - Abstract: Self-assembly snowflake-like palladium nanostructures were synthesized under microwave irradiation using H{sub 2}PdCl{sub 4} as precursor, benzyl alcohol as both solvent and reducing agent, and PVP as stabilizer. The Pd snowflake-like nanostructures were formed and then characterized by transmission electron microscopy (TEM) and X-ray powder diffraction. The TEM images showed that the Pd nano-snowflakes were self-assemblies organized by hundreds of small spherical nanoparticles. Pd snowflake-like nanostructures with well-defined shape and uniform size can be obtained by tuning the concentration of palladium precursor, the molar ratio of H{sub 2}PdCl{sub 4}/PVP, as well as the heating time by microwave irradiation. The possible growing process of the snowflake-like Pd structures was also proposed on the basis of investigating the properties of as-synthesized Pd nanostructures under different conditions.

36 MATERIALS SCIENCE↗

One-step hydrothermal synthesis and characterization of V–Cr–O nanospheres and their excellent performance in the ammoxidation of 3,4- and 2,6-DCT

Graphical abstract: - Highlights: • V–Cr–O composite was synthesized by a facile one pot hydrothermal route. • The V–Cr–O composite has sphere-like morphology. • The as-obtained V–Cr–O composite has large specific surface area: 117 m{sup 2} g{sup −1}. • V–Cr–O complex was explored as the catalyst for the ammoxidation. - Abstract: Sphere-like V–Cr–O catalyst was successfully synthesized using V{sub 2}O{sub 5}, CrO{sub 3} and H{sub 2}C{sub 2}O{sub 4} solution as the starting materials by a facile one pot hydrothermal approach for the first time. The as-obtained samples were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray spectrometer, hydrogen temperature programmed reduction, scanning electron microscopy and Brunauer–Emmett–Teller. The results indicated that V–Cr–O spheres with the diameter about 4 μm, consisted of lots of nanoparticles, were formed. The as-obtained V–Cr–O catalyst had large specific surface area: 117 m{sup 2} g{sup −1}. Furthermore, V–Cr–O complex was explored as the unsupported catalyst for the synthesis of 3,4- and 2,6-dichlorobenzonitrile by the ammoxidation of 3,4- and 2,6-dichlorotoluene. It was found that it had excellent performance in the ammoxidation reactions, specially, the catalytic temperature was decreased to about 320 °C, which was much lower than the previous reports (380–420 °C)

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties of the Cr-doped spiral antiferromagnet BiMnFe{sub 2}O{sub 6}

Graphical abstract: - Highlights: • The substitution of Cr for Mn in BiMnFe{sub 2}O{sub 6} is possible by the solution–gel method. • The BiCr{sub x}Mn{sub 1−x}Fe{sub 2}O{sub 6} solid solution is obtained for the x values up to 0.3. • Increasing Cr content lowers the temperature of the antiferromagnetic ordering. - Abstract: We report the Cr{sup 3+} for Mn{sup 3+} substitution in the BiMnFe{sub 2}O{sub 6} structure. The BiCr{sub x}Mn{sub 1−x}Fe{sub 2}O{sub 6} solid solution is obtained by the solution–gel synthesis technique for the x values up to 0.3. The crystal structure investigation using a combination of X-ray powder diffraction and transmission electron microscopy demonstrates that the compounds retain the parent BiMnFe{sub 2}O{sub 6} structure (for x = 0.3, a = 5.02010(6)Å, b = 7.06594(7)Å, c = 12.6174(1)Å, S.G. Pbcm, R{sub I} = 0.036, R{sub P} = 0.011) with only a slight decrease in the cell parameters associated with the Cr{sup 3+} for Mn{sup 3+} substitution. Magnetic susceptibility measurements suggest strong similarities in the magnetic behavior of BiCr{sub x}Mn{sub 1−x}Fe{sub 2}O{sub 6} (x = 0.2; 0.3) and parent BiMnFe{sub 2}O{sub 6}. Only T{sub N} slightly decreases upon Cr doping that indicates a very subtle influence of Cr{sup 3+} cations on the magnetic properties at the available substitution rates.

36 MATERIALS SCIENCE↗

Photocatalytic performances and activities of Ag-doped CuFe{sub 2}O{sub 4} nanoparticles

Graphical abstract: - Highlights: • CuFe{sub 2}O{sub 4} nanocrystals were synthesized by a co-precipitation method. • Ag/CuFe{sub 2}O{sub 4} catalyst was prepared by the wetness impregnation strategy. • The structural properties of Ag/CuFe{sub 2}O{sub 4} were investigated by XRD, TEM, DRS, and XPS techniques. • Ag/CuFe{sub 2}O{sub 4} has higher photocatalytic activity. - Abstract: In this work, CuFe{sub 2}O{sub 4} nanoparticles were synthesized by a chemical co-precipitation route. The Ag/CuFe{sub 2}O{sub 4} catalyst was prepared based on the CuFe{sub 2}O{sub 4} nanoparticles by the incipient wetness impregnation strategy, which showed excellent photoelectric property and catalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction (XRD), transmission electronic microscopy (TEM), UV–vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage (SPV) measurement. The photocatalytic degradation of 4-CP by the Ag/CuFe{sub 2}O{sub 4} and CuFe{sub 2}O{sub 4} samples were comparatively studied under xenon lamp irradiation. The results indicate that the Ag/CuFe{sub 2}O{sub 4} sample exhibited the higher efficiency for the degradation of 4-CP.

36 MATERIALS SCIENCE↗

Morphology-controlled synthesis of Ag{sub 3}PO{sub 4} nano/microcrystals and their antibacterial properties

Graphical abstract: The Ag{sub 3}PO{sub 4} with rhombic dodecahedral, spherical and small size particles were controllable fabricated just by changing the types of the solvent. The materials possess good antibacterial properties toward different kinds of bacteria. - Highlights: • The Ag{sub 3}PO{sub 4} with three morphologies were controllable fabricated. • The Ag{sub 3}PO{sub 4} as-prepared possess obvious antibacterial properties in the dark. • The antibacterial ability of Ag{sub 3}PO{sub 4} could be greatly improved under the visible light irradiation. - Abstract: We reported the controllable fabrication of Ag{sub 3}PO{sub 4} nano/microcrystals through a simple solution-based precipitation reaction. The samples were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and infrared spectroscopy. The results indicated that the Ag{sub 3}PO{sub 4} crystals with three different morphology, including the rhombic dodecahedron of 500 nm, the sphere of 100 nm and the particles with small-size of 20 nm, could be obtained in the solvents of water, ethylene glycol (EG) and dimethyl sulfoxide (DMSO). The antibacterial assay showed that all samples possess obvious antibacterial properties. In addition, the Ag{sub 3}PO{sub 4} with small size of 20 nm showed better activity due to their high specific surface areas. Notably, we have found that the antibacterial ability of Ag{sub 3}PO{sub 4} could be greatly improved under the visible light irradiation, which are superior to that in the dark and commercial streptomycin.

36 MATERIALS SCIENCE↗

Characterization and visible light photocatalytic mechanism of size-controlled BiFeO{sub 3} nanoparticles

Graphical abstract: BiFeO{sub 3} nanoparticles showed the size-dependent photocatalytic properties, and the corresponding photocatalytic mechanism for the pollutant degradation was proposed. - Highlights: • Size-controlled BiFeO{sub 3} nanoparticles were prepared by sol–gel method. • The hydroxyl radicals were the main reactive species responsible for the pollutant degradation. • BiFeO{sub 3} nanoparticles showed the size-dependent photocatalytic properties. - Abstract: BiFeO{sub 3} nanoparticles with controlled particle size were synthesized via sol–gel method. The samples were characterized by X-ray powder diffraction, transmission electron microscope, Raman spectra, nitrogen adsorption technique and UV–vis diffuse reflectance spectra. Photocatalytic activity of BiFeO{sub 3} nanoparticles was further examined by monitoring the degradation of Rhodamine B dye in an aqueous solution under visible light irradiation. Through the calculation of band position and a number of diagnostic experiments, the photocatalytic mechanism of BiFeO{sub 3} nanoparticles was proposed in this study. It was found that the hydroxyl radicals originated from the photogenerated electrons were the main reactive species responsible for the pollutant degradation. Moreover, with the variations of annealing temperature and time, the average crystallite size, specific surface area and crystallinity of BiFeO{sub 3} nanoparticles could be changed, which thus affected the photocatalytic activity of the corresponding samples.

36 MATERIALS SCIENCE↗

Facile synthesis of Cu/Cu{sub x}O nanoarchitectures with adjustable phase composition for effective NO{sub x} gas sensor at room temperature

Graphical abstract: The Cu/Cu{sub x}O nanoarchitectures with 30–70 nm hollow nanospheres reduced by 3 mmol NaBH{sub 4} exhibits excellent gas-sensing property to low-concentration NO{sub x} gas at room temperature. - Highlights: • The Cu/Cu{sub x}O nanoarchitectures with hollow nanospheres are successfully synthesized. • The method is used for preparing the with Cu/Cu{sub x}O adjustable phase composition. • The C3 sample exhibites excellent gas-sensing propertie to NO{sub x} at room temperation. • The Cu/Cu{sub x}O nanoarchitectures have significant for application of gas sensor. - Abstract: The Cu/Cu{sub x}O nanoarchitectures with 30–70 nm hollow nanospheres are successfully synthesized by a facile wet chemical method. The synthesized products have been studied by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermo gravimetric-differential scanning calorimetry (TG-DSC) analysis. The Cu/Cu{sub x}O sensors based on the nanoarchitectures are used to detect the NO{sub x} at room temperature. The results demonstrate that the obtained Cu/Cu{sub x}O nanoarchitectures reduced by 3 mmol NaBH{sub 4} exhibits excellent gas-sensing properties: low detection limit of 0.97 ppm, relatively high sensitivity, short response time, broad linear range and high selectivity. The reasons for gas-sensing activity enhancement on Cu/Cu{sub x}O nanoarchitectures are discussed. The Cu/Cu{sub x}O nanocrystalline with the hierarchical pores structure and tunable compositions have significant for application of gas sensor.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of a new anion-deficient perovskite Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} with crystallographic shear structure

Graphical abstract: - Highlights: • Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} was obtained by solid state synthesis. • Its structure was refined from combination of XPD and TEM. • It is a new member of the perovskite-related homologous series A{sub n}B{sub n}O{sub 3n−2} with n = 5. • Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} is antiferromagnetically ordered below T{sub N} ≈350 K. - Abstract: Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13}, a new n = 5 member of the oxygen-deficient perovskite-based A{sub n}B{sub n}O{sub 3n−2} homologous series, was synthesized using a solid-state method. The crystal structure of Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} was investigated by a combination of synchrotron X-ray powder diffraction, electron diffraction, high-angle annular dark-field scanning transmission electron microscopy and Mössbauer spectroscopy. At 900 K, it crystallizes in the Ammm space group with the unit cell parameters a = 5.8459(1) Å, b = 4.0426(1) Å, and c = 27.3435(1) Å. In the Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} structure, quasi-two-dimensional perovskite blocks are periodically interleaved with ½[1 1 0] (1{sup ¯}01){sub p} crystallographic shear (CS) planes. At the CS planes, the corner-sharing FeO{sub 6} octahedra are transformed into chains of edge-sharing FeO{sub 5} distorted tetragonal pyramids. B-positions of the perovskite blocks between the CS planes are jointly occupied by Fe{sup 3+} and Sc{sup 3+}. The chains of the FeO{sub 5} pyramids and (Fe,Sc)O{sub 6} octahedra delimit six-sided tunnels that are occupied by double columns of cations with a lone electron pair (Pb{sup 2+}). The remaining A-cations (Bi{sup 3+}, Ba{sup 2+}) occupy positions in the perovskite block. According to the magnetic susceptibility measurements, Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} is antiferromagnetically ordered below T{sub N} ≈350 K.

36 MATERIALS SCIENCE↗

Synthesis of TiO{sub 2} core/RuO{sub 2} shell particles using multistep ultrasonic spray pyrolysis

Graphical abstract: - Highlights: • TiO{sub 2} core/RuO{sub 2} shell submicron-particles were prepared via a sequential spray pyrolysis. • Spherical particles have the mean particle diameters between 200 and 400 nm. • This method is promising for synthesis of core–shell and core–multishell materials. - Abstract: Spherical submicron-particles with TiO{sub 2} core–RuO{sub 2} shell structure have been synthesized by employing sequential ultrasonic spray pyrolysis. The particles have been investigated by X-ray powder diffraction, scanning electron microscopy and different transmission electron microscopy techniques. The quality of the core–shell structure of the particles has been confirmed by comparison of the experimental data with those generated on the basis of a hard sphere core–shell model. It has been found that the mixing of the Ru-containing aerosol with the TiO{sub 2} particle stream has a significant impact on the core–shell formation. The method introduced in this study can probably be applied for preparation of core–shell and core–multishell materials that are difficult to synthesize in a single step spray pyrolysis process.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis, characterization and luminescent properties of GdPO{sub 4}·H{sub 2}O:Tb{sup 3+} nanorods and nanobundles

Graphical abstract: - Highlights: • The GdPO{sub 4}·H{sub 2}O:Tb{sup 3+} nanocrystals have been synthesized via a hydrothermal method. • The formation mechanisms of the nanorods and nanobundles were put forward. • The luminescent intensities are associated with the morphologies and sizes. - Abstract: In this paper, the Tb{sup 3+}-doped GdPO{sub 4}·H{sub 2}O nanorods and nanobundles have been synthesized by the hydrothermal method with and without glycine, respectively. The X-ray powder diffraction (XRD), thermogravimetric and differential thermal analysis (TG–DTA), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), energy-dispersive spectra (EDS) and photoluminescence (PL) were employed to characterize the as-obtained products. It was found that the addition of glycine and the pH value have crucial influences on the formation of the resulting morphologies and sizes. The possible formation mechanisms for GdPO{sub 4}·H{sub 2}O:Tb{sup 3+} nanorods and nanobundles were put forward. A detailed investigation on the photoluminescence of GdPO{sub 4}·H{sub 2}O:Tb{sup 3+} different samples revealed that the luminescent properties of products are strongly correlated with the morphologies, sizes, coordination environment and crystal field symmetry.

36 MATERIALS SCIENCE↗

Novel yellowish-green emitting luminescence in Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} phosphor

Graphical abstract: The phosphor has two separated emission centers with the dependent emission intensity on Eu{sup 2+} doping. There is a red-shift in the emission due to energy transfer with increasing the Eu{sup 2+}-doping. - Highlights: • Green-origin-emitting phosphors of Eu{sup 2+}-doped Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} were firstly prepared by chemical sol–gel method. • The tunable luminescence color was realized by the changing Eu{sup 2+}-doping in Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}. • Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} displays two typical luminescence centers with the emission depending on Eu{sup 2+} doping. • Eu{sup 2+}-doped Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} phosphor has an excellent thermal stability on the temperature quenching. - Abstract: Color tunable green-origin-emitting phosphor of Eu{sup 2+}-doped phosphate-silicate Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} was prepared by chemical sol–gel method. The X-ray powder diffraction, the photoluminescence excitation and emission spectra, time resolved spectra, and thermal stability were measured. The excitation spectra can well match with the emission light of near UV-LED chips (360–400 nm). The tunable luminescence was realized by changing Eu{sup 2+}-doping concentration. Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} displays two typical luminescence centers, which were suggested to originate from two Ca{sup 2+} sites in the host. With increasing Eu{sup 2+} doping concentrations, the green emission band shifts to long wavelength. Energy transfer between the two different Eu{sup 2+} ions is discussed by analyzing the photoluminescence excitation and emission spectra, concentration-dependent luminescence intensity, and lifetimes. The dependence of the luminescence intensity of Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} on temperatures was measured. The activation energy (ΔE) for thermal quenching was reported.

36 MATERIALS SCIENCE↗