Search NASA⌕ Search

SEARCH · Search NASA

Results for “program ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Radiation of cylindrical duct acoustic modes with flow mismatch

Calculations for the radiation of spinning acoustic modes, with or without a centerbody, and with or without flow temperature and velocity discontinuity, are presented. Solutions to the appropriate convected wave equations devised around Fourier transforms and Wiener-Hopf technique are presented. The decomposition of the asymmetric kernel, resulting from a flow and temperature mismatch, is carried out in part exactly and partially using the so-called Carrier-Koiter approximation procedure. The resulting solutions offer a good approximation to the radiation of both symmetric and asymmetric modes through a flow discontinuity represented as a plug flow jet issuing from a cylindrical duct. Besides the Koiter approximation, the major limitation on the calculation program is the difficulty of calculating the high order Bessel functions with sufficient accuracy.

Savkar, S. D.↗

Study of shuttle imaging microwave system antenna. Volume 1: Conceptual design

A detailed preliminary design and complete performance evaluation are presented of an 11-channel large aperture scanning radiometer antenna for the shuttle imaging microwave system (SIMS) program. Provisions for interfacing the antenna with the space shuttle orbiter are presented and discussed. A program plan for hardware development and a rough order of magnitude (ROM) cost are also included. The conceptual design of the antenna is presented. It consists of a four-meter diameter parabolic torus main reflector, which is a graphite/epoxy shell supported by a graphite/epoxy truss. A rotating feed wheel assembly supports six Gregorian subreflectors covering the upper eight frequency channels from 6.6 GHz through 118.7 GHz, and two three-channel prime forms feed assemblies for 0.6, 1.4, and 2.7 GHz. The feed wheel assembly also holds the radiometers and power supplies, and a drive system using a 400 Hz synchronous motor is described. The RF analysis of the antenna is performed using physical optics procedures for both the dual reflector Gregorian concept and the single reflector prime focus concept. A unique aberration correcting feed for 2.7 GHz is analyzed. A structural analysis is also included. The analyses indicate that the antenna will meet system requirements.

Wesley, R. W.↗

EMGAN: A computer program for time and frequency domain reduction of electromyographic data

An experiment in electromyography utilizing surface electrode techniques was developed for the Apollo-Soyuz test project. This report describes the computer program, EMGAN, which was written to provide first order data reduction for the experiment. EMG signals are produced by the membrane depolarization of muscle fibers during a muscle contraction. Surface electrodes detect a spatially summated signal from a large number of muscle fibers commonly called an interference pattern. An interference pattern is usually so complex that analysis through signal morphology is extremely difficult if not impossible. It has become common to process EMG interference patterns in the frequency domain. Muscle fatigue and certain myopathic conditions are recognized through changes in muscle frequency spectra.

Hursta, W. N.↗

Identification of the stability parameters of an aeroelastic airplane

Phase variable transformations are used to construct the mathematical model of an aeroelastic aircraft in a form that is amenable to partial or piecemeal acceptance of parameters estimated from flight data. The problem is one of parameter identification of large scale dynamic systems involving a system matrix characterized by about 200 elements. A mathematical model of the USAF Total In-Flight Simulator was computed using the FLEXSTAB program. As data became available during the progress of the flight test program, it was processed and substituted in the mathematical model for parameters obtained from the FLEXSTAB program. Results tend to show a progressive and orderly transition from an analytically defined mathematical model to one obtained from the flight tests of the actual aircraft.

Rynaski, E. G.↗

Application of constrained optimization to active control of aeroelastic response

Active control of aeroelastic response is a complex in which the designer usually tries to satisfy many criteria which are often conflicting. To further complicate the design problem, the state space equations describing this type of control problem are usually of high order, involving a large number of states to represent the flexible structure and unsteady aerodynamics. Control laws based on the standard Linear-Quadratic-Gaussian (LQG) method are of the same high order as the aeroelastic plant. To overcome this disadvantage of the LQG mode, an approach developed for designing low order optimal control laws which uses a nonlinear programming algorithm to search for the values of the control law variables that minimize a composite performance index, was extended to the constrained optimization problem. The method involves searching for the values of the control law variables that minimize a basic performance index while satisfying several inequality constraints that describe the design criteria. The method is applied to gust load alleviation of a drone aircraft.

Newsom, J. R.↗

Cardiovascular responses to static exercise in distance runners and weight lifters

Three groups of athletes including long-distance runners, competitive and amateur weight lifters, and age- and sex-matched control subjects have been studied by hemodynamic and echocardiographic methods in order to determine the effect of the training programs on the cardiovascular response to static exercise. Blood pressure, heart rate, and double product data at rest and at fatigue suggest that competitive endurance (dynamic exercise) training alters the cardiovascular response to static exercise. In contrast to endurance exercise, weight lifting (static exercise) training does not alter the cardiovascular response to static exercise: weight lifters responded to static exercise in a manner very similar to that of the control subjects.

Longhurst, J. C.↗

Linearized transfer between coplanar circular orbits using blow down propulsion system

A closed form solution is presented for the coplanar transfer between nearby circular orbits for spacecraft using their own blow down propulsion system. The decaying thrust is applied along the local horizontal and the linearized equation of motion in the orbital elements formulation are used to describe the transfer which consists of a thrust-coast-relight program. Sensitivity partials are also presented analytically in order to study the effect of maneuver execution errors and various other parameters affecting the blow down propulsion system characteristics on the transfer. This strategy is applied to study the transfer of the TOPEX spacecraft from the Shuttle parking orbit to its final operational orbit.

Kechichian, J. A.↗

Planar dynamics of a uniform beam with rigid bodies affixed to the ends

The planar dynamics of a uniform elastic beam subject to a variety of geometric and natural boundary conditions and external excitations were analyzed. The beams are inextensible and capable of small transverse bending deformations only. Classical beam vibration eigenvalue problems for a cantilever with tip mass, a cantilever with tip body and an unconstrained beam with rigid bodies at each are examined. The characteristic equations, eigenfunctions and orthogonality relations for each are derived. The forced vibration of a cantilever with tip body subject to base acceleration is analyzed. The exact solution of the governing nonhomogeneous partial differential equation with time dependent boundary conditions is presented and compared with a Rayleigh-Ritz approximate solution. The arbitrary planar motion of an elastic beam with rigid bodies at the ends is addressed. Equations of motion are derived for two modal expansions of the beam deflection. The motion equations are cast in a first order form suitable for numerical integration. Selected FORTRAN programs are provided.

Storch, J.↗

Supercomputer implementation of finite element algorithms for high speed compressible flows

Prediction of compressible flow phenomena using the finite element method is of recent origin and considerable interest. Two shock capturing finite element formulations for high speed compressible flows are described. A Taylor-Galerkin formulation uses a Taylor series expansion in time coupled with a Galerkin weighted residual statement. The Taylor-Galerkin algorithms use explicit artificial dissipation, and the performance of three dissipation models are compared. A Petrov-Galerkin algorithm has as its basis the concepts of streamline upwinding. Vectorization strategies are developed to implement the finite element formulations on the NASA Langley VPS-32. The vectorization scheme results in finite element programs that use vectors of length of the order of the number of nodes or elements. The use of the vectorization procedure speeds up processing rates by over two orders of magnitude. The Taylor-Galerkin and Petrov-Galerkin algorithms are evaluated for 2D inviscid flows on criteria such as solution accuracy, shock resolution, computational speed and storage requirements. The convergence rates for both algorithms are enhanced by local time-stepping schemes. Extension of the vectorization procedure for predicting 2D viscous and 3D inviscid flows are demonstrated. Conclusions are drawn regarding the applicability of the finite element procedures for realistic problems that require hundreds of thousands of nodes.

Thornton, E. A.↗

Space Shuttle navigation validation

The validation of the guidance, navigation, and control system of the Space Shuttle is explained. The functions of the ascent, on-board, and entry mission phases software of the navigation system are described. The common facility testing, which evaluates the simulations to be used in the navigation validation, is examined. The standard preflight analysis of the operational modes of the navigation software and the post-flight navigation analysis are explained. The conversion of the data into a useful reference frame and the use of orbit parameters in the analysis of the data are discussed. Upon entry the data received are converted to flags, ratios, and residuals in order to evaluate performance and detect errors. Various programs developed to support navigation validation are explained. A number of events that occurred with the Space Shuttle's navigation system are described.

Ragsdale, A.↗

Scientific requirements for a Moderate-Resolution Imaging Spectrometer (MODIS) for EOS

The MODIS is an instrument planned for the sun-synchronous polar orbiting segment of the Space Station system. The radiometer is required to have 1 km resolution in terrestrial remote sensing applications. The monitoring program is targeted to last 10 yr in order to provide a sufficient database for discerning trends as opposed to natural variations. The study areas of interest include tropical deforestation, regrowth and areal distributions, acid rain effects on northern forests, desertification rates and locations, snow cover/albedo relationships and total biomass. MODIS will have 192 channels with 30 m spatial resolution and cover seven bands in the 3.5-12 microns interval for land viewing. Ocean studies will be carried out in 17 bands from 0.4-1.0 micron, and atmospheric scans will be performed over the land and ocean intervals at narrowband wavelengths (1.2 nm). Si detector arrays will be used and will be accompanied by an expected 600:1 SNR and produce data at a rate of 1.4-9.1 Mb/sec.

Barnes, W. L.↗

Development testing of large volume water sprays for warm fog dispersal

A new brute-force method of warm fog dispersal is described. The method uses large volume recycled water sprays to create curtains of falling drops through which the fog is processed by the ambient wind and spray induced air flow. Fog droplets are removed by coalescence/rainout. The efficiency of the technique depends upon the drop size spectra in the spray, the height to which the spray can be projected, the efficiency with which fog laden air is processed through the curtain of spray, and the rate at which new fog may be formed due to temperature differences between the air and spray water. Results of a field test program, implemented to develop the data base necessary to assess the proposed method, are presented. Analytical calculations based upon the field test results indicate that this proposed method of warm fog dispersal is feasible. Even more convincingly, the technique was successfully demonstrated in the one natural fog event which occurred during the test program. Energy requirements for this technique are an order of magnitude less than those to operate a thermokinetic system. An important side benefit is the considerable emergency fire extinguishing capability it provides along the runway.

Keller, V. W.↗

The filters for the Extreme Ultraviolet Explorer - Calibration and lifetesting results

The results of the transmission calibrations of the seven sets of flight integration filters for the Extreme Ultraviolet Explorer (EUVE) satellite are presented. The Berkely EUV Calibration Facility was used to determine absolute transmissions over six orders of magnitue at 28 wavelengths. A lifetesting program designed to monitor changes in the transmission and mechanical properties of the EUVE filters over the lifetime of the mission is described.

Vedder, P. W.↗

The NASA Lewis Research Center electric propulsion program

The Lewis Research Center conducts an electric propulsion program aimed at a broad class of space missions. The program is structured in an evolutionary fashion in order to both maximize expectations for the acceptance of developed concepts and accommodate anticipated developments of critical system technologies. Recent efforts have assisted in the acceptance of low power electric rockets. Primary electric propulsion concepts are also being developed for both Solar Electric Propulsion Systems and Nuclear Electric Propulsion Systems class space missions, and the paper briefly describes the concepts under evaluation for potential Space Exploration Initiative missions.

Byers, David C.↗

Structural optimization of thin shells using finite element method

The objective of the present work was the structural optimization of thin shell structures that are subjected to stress and displacement constraints. In order to accomplish this, the structural optimization computer program DESAP1 was modified and improved. In the static analysis part of the DESAP1 computer program the torsional spring elements, which are used to analyze thin, shallow shell structures, were eliminated by modifying the membrane stiffness matrix of the triangular elements in the local coordinate system and adding a fictitious rotational stiffness matrix. This simplified the DESAP1 program input, improved the accuracy of the analysis, and saved computation time. In the optimization part of the DESAP1 program the stress ratio formula, which redesigns the thickness of each finite element of the structure, was solved by an analytical method. This scheme replaced the iterative solution that was previously used in the DESAP1 program, thus increasing the accuracy and speed of the design. The modified program was used to design a thin, cylindrical shell structure with optimum weight, and the results are reported in this paper.

Gotsis, Pascal K.↗

Program Helps Decompose Complex Design Systems

DeMAID (A Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Groups modular subsystems on basis of interactions among them. Saves considerable money and time in total design process, particularly in new design problem in which order of modules has not been defined. Available in two machine versions: Macintosh and Sun.

Rogers, James L., Jr.↗

Remote sensing/global change. A special bibliography

The first portion of this bibliography contains citations (with abstracts, when available) to unclassified literature contained in the NASA STI Database. These citations also appeared in issues of the abstract journal 'Scientific and Technical Aerospace Reports (STAR)', or in other announcement products offered by the NASA STI Program. The citations appear in ascending accession number order. A second section provides several indexes to the citations. They are subject term, personal author, report number, and accession number. The citations are included for the following disciplines as they relate to remote sensing and global change: astronautics, engineering, geosciences, life sciences, mathematical and computer sciences, social sciences, and space sciences.

Source record↗

Preimpact characterization of Comet P/Shoemaker-Levy 9

At McDonald Observatory, we have undertaken a major program of observation of Comet P/Shoemaker-Levy 9 in order to charcterize the dynamics and physical make-up of the fragments prior to their disappearance in July 1994 when they collide with Jupiter. Obserations have included astrometry, photometry, and spectroscopy. Our astrometric observations have been important for deriving accurate orbits for the individual fragments. With the photometry, we have derived (B-V) and (V-R) colors for a number of fragemnts. We show that they are slightly redder than the Sun in (B-V) and similar to the Sun in (V-R); they may show differences in colors for the individual fragments. We detected no gas with our spectroscopic observations and have derived sensitive upper limits on the quantity of gas. Our observations are consistent with the parent being a comet, as classified, but cannot rule out certain types of asteroids as progenitors.

Cochran, Anita L.↗