Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Measurement of the spin of the {xi}(1530) resonance

The properties of the {xi}(1530) resonance are investigated in the {lambda}{sub c}{sup +}{yields}{xi}{sup -}{pi}{sup +}K{sup +} decay process. The data sample was collected with the BABAR detector at the SLAC PEP-II asymmetric-energy e{sup +}e{sup -} collider operating at center-of-mass energies 10.58 and 10.54 GeV. The corresponding integrated luminosity is approximately 230 fb{sup -1}. The spin of the {xi}(1530) is established to be 3/2. The existence of an S-wave amplitude in the {xi}{sup -}{pi}{sup +} system is inferred, and its interference with the {xi}(1530){sup 0} amplitude provides the first clear demonstration of the Breit-Wigner phase motion expected for the {xi}(1530). The P{sub 1}(cos{theta}{sub {xi}}{sub {sup -}}) Legendre polynomial moment indicates the presence of a significant S-wave amplitude for {xi}{sup -}{pi}{sup +} mass values above 1.6 GeV/c{sup 2}, and a dip in the mass distribution at approximately 1.7 GeV/c{sup 2} is interpreted as due to the coherent addition of a {xi}(1690){sup 0} contribution to this amplitude. This would imply J{sup P}=1/2{sup -} for the {xi}(1690). Attempts at fitting the {xi}(1530){sup 0} line shape yield unsatisfactory results, and this failure is attributed to interference effects associated with the amplitudes describing the K{sup +}{pi}{sup +} and/or {xi}{sup -}K{sup +} systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pion distribution amplitude extracted from the experimental data with the local duality sum rule

The photon-to-pion transition form factor is investigated using the form of the renormalon-based twist-four pion distribution amplitude (DA) in the framework of the light-cone local-duality QCD sum rule, which, with suitable parameters, is insensitive to the higher-order Gegenbauer coefficients. With a careful determination for the insertion parameters so that the contribution from the higher-order Gegenbauer expansions is suppressed, the best-fit central values of the first two nontrivial Gegenbauer coefficients of the pion distribution amplitude are extracted out from the CLEO data to be a{sub 2}(1 GeV{sup 2})=0.145{+-}0.055 and a{sub 4}(1 GeV{sup 2})=-(0.125{+-}0.085), respectively. The rescaled photon-to-pion transition form factor with our best-fit parameters is consistent very well with both the CELLO data and the prediction of the interpolation formula in all the experimental accessible region of the momentum transfer. The shape of the pion distribution amplitude based on the two-parameter model favors the camel-like type, where the near-end-point values are suppressed more than the asymptotic DA, and satisfies the midpoint constraint from light-cone sum rules approximately.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Causality in Condensates: Gray Solitons as Relics of BEC Formation

Symmetry breaking during phase transitions can lead to the formation of topological defects (such as vortex lines in superfluids). However, the usually studied Bose-Einstein condensates (BECs) have the shape of a cigar, a geometry that impedes vortex formation, survival, and detection. I show that, in elongated traps, one can expect the formation of gray solitons (long-lived, nontopological 'phase defects') as a result of the same mechanism. Their number will rise approximately in proportion to the transition rate. This steep rise is due to the increasing size of the region of the BEC cigar where the phase of the condensate wave function is chosen locally (rather than passed on from the already formed BEC)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SU-F-T-661: Dependence of Gold Nano Particles Cluster Morphology On Dose Enhancement of Photon Radiation Therapy Apply for Radiation Biology Effect

Purpose: Injected gold nano particles (GNPs) to a body for dose enhancement are known to form in the tumorcell cluster morphology. We investigated the dependence of dose enhancement on the morphology characteristic with an approximated morphology model by using Monte Carlo simulations. Methods: For MC simulation, TOPAS version 2.0P-03 was used. GNP cluster morphology was approximated as a body center cubic(BCC) model by placing 8 GNPs at the corner and one at the center of cube with length from 2.59 µm to 0.25 µm located in a 4 µm length water filled cube phantom. 4 µm length square shaped beams of poly-energetic 50, 260 kVp photons were irradiated to the water filled cube phantom with 100 nm diameter GNPs in it. Dose enhancement ratio(DER) was computed as a function of distance from the surface of the GNP at the cube center for 18 cubes geometries. For scoring particles, 10 nm width of concentric shell shaped detector was constructed up to 100 nm from the center. Total dose in a sphere of 100 nm radius of detector were normalized to 2.59 µm length cube morphology. To verified biological effect of BCC model applied to cell survival curve fitting. Results: DER increase as the distance of the GNPs reduces. DER was largest for 0.25 µm length cube. Dependence of GNP distance DER increment was 1.73, 1.60 for 50 kVp, 260 kVp photons, respectively. Also, Using BCC model applied to cell survival curve was well prediction. Conclusion: DER with GNPs was larger when they are closely packed in the phantom. Therefore, better therapeutic effects can be expected with close-packed GNPs. This research was supported by the NRF funded by the Ministry of Science, ICT & Future Planning (2012M3A9B6055201 and 2012R1A1A2042414), Samsung Medical Center grant[GFO1130081].

60 APPLIED LIFE SCIENCES↗

Shift and asymmetry of the saturated absorption resonance in the field of counterpropagating elliptically polarized waves

The saturated absorption resonance in an atomic gas in the field of counterpropagating light waves with an arbitrary elliptical polarization is investigated. A conclusion about the peculiarities of the resonance shape is drawn from a general analysis of the symmetry of the problem. In particular, a new effect has been found: the polarization parameters of the light waves can lead to an asymmetry and shift of the resonance. These conclusions are corroborated by an approximate analytical solution for the F{sub g} = 1 {yields} F{sub e} = 2 transition and by numerical calculations. Apart from their fundamental importance, the results obtained can have important applications in metrology (frequency and time standards).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intensity Distribution of the Three-Wave Diffraction from Dislocation Epitaxial Layers in the Reciprocal Space

The three-wave X-ray diffraction in strongly disordered epitaxial layers of GaN and ZnO is experimentally investigated. The charts of the intensity distribution in the reciprocal space are plotted in coordinates q{sub θ} and q{sub ϕ} for the most intensive three-wave combination (1010)/(1011) by means of subsequent θ- and ϕ-scanning. A nontrivial shape of the θ-sections of these contours at a distance from the ϕ center of reflection is revealed; it is different for different samples. For the θ-curves at the center of reflection, we observed a common peak that may be approximated by the Voigt function with a power-low decrease in the intensity at the wings; the decrease law (from–4.5 to–5.0) is found to be considerably greater than that for the similar curves of two-wave diffraction and not depending on the dislocation density and distribution in layers. In some films we observed a coarse-block structure; in addition, it follows from the distribution in the reciprocal space that these blocks are turned with respect to each other around a normal to the surface, which allows us to suggest the existence of low-angle boundaries between them, consisting exclusively of edge dislocations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Halo currents and vertical displacements after ITER disruptions

Axisymmetric control of the vertical position of highly shaped tokamaks, such as ITER, requires active feedback. In ITER, this control will be lost during the period in which the plasma current decays following a thermal quench of a disruption; the decay is sufficiently rapid that the surrounding walls in ITER can be approximated as perfect conductors. When axisymmetric feedback control was required before the disruption, it is shown that the edge safety factor tends to drop as the plasma current decays following a thermal quench. When the q = 2 surface approaches the plasma edge, a strong nonaxisymmetric halo current is expected to arise, which could occur when the plasma current has decayed less than 20% from the predisruption magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Genomic and Phenotypic Characterization of Chloracidobacterium Isolates Provides Evidence for Multiple Species

Chloracidobacterium is the first and until now the sole genus in the phylum Acidobacteriota (formerly Acidobacteria ) whose members perform chlorophyll-dependent phototrophy (i.e., chlorophototrophy). An axenic isolate of Chloracidobacterium thermophilum (strain B T ) was previously obtained by using the inferred genome sequence from an enrichment culture and diel metatranscriptomic profiling analyses in situ to direct adjustments to the growth medium and incubation conditions, and thereby a defined growth medium for Chloracidobacterium thermophilum was developed. These advances allowed eight additional strains of Chloracidobacterium spp. to be isolated from microbial mat samples collected from Mushroom Spring, Yellowstone National Park, United States, at temperatures of 41, 52, and 60°C; an axenic strain was also isolated from Rupite hot spring in Bulgaria. All isolates are obligately photoheterotrophic, microaerophilic, non-motile, thermophilic, rod-shaped bacteria. Chloracidobacterium spp. synthesize multiple types of (bacterio-)chlorophylls and have type-1 reaction centers like those of green sulfur bacteria. Light harvesting is accomplished by the bacteriochlorophyll a -binding, Fenna-Matthews-Olson protein and chlorosomes containing bacteriochlorophyll c . Their genomes are approximately 3.7 Mbp in size and comprise two circular chromosomes with sizes of approximately 2.7 Mbp and 1.0 Mbp. Comparative genomic studies and phenotypic properties indicate that the nine isolates represent three species within the genus Chloracidobacterium . In addition to C. thermophilum , the microbial mats at Mushroom Spring contain a second species, tentatively named Chloracidobacterium aggregatum , which grows as aggregates in liquid cultures. The Bulgarian isolate, tentatively named Chloracidobacterium validum , will be proposed as the type species of the genus, Chloracidobacterium. Additionally, Chloracidobacterium will be proposed as the type genus of a new family, Chloracidobacteriaceae , within the order Blastocatellales , the class Blastocatellia , and the phylum Acidobacteriota.

59 BASIC BIOLOGICAL SCIENCES↗

THE MISSION ACCESSIBLE NEAR-EARTH OBJECTS SURVEY (MANOS): FIRST PHOTOMETRIC RESULTS

The Mission Accessible Near-Earth Objects Survey aims to physically characterize sub-km near-Earth objects (NEOs). We report the first photometric results from the survey that began in 2013 August. Photometric observations were performed using 1–4 m class telescopes around the world. We present rotational periods and light curve amplitudes for 86 sub-km NEOs, though in some cases only lower limits are provided. Our main goal is to obtain light curves for small NEOs (typically, sub-km objects) and estimate their rotational periods, light curve amplitudes, and shapes. These properties are used for a statistical study to constrain overall properties of the NEO population. A weak correlation seems to indicate that smaller objects are more spherical than larger ones. We also report seven NEOs that are fully characterized (light curve and visible spectra) as the most suitable candidates for a future human or robotic mission. Viable mission targets are objects fully characterized, with Δ v {sup NHATS} ≤ 12 km s{sup −1}, and a rotational period P > 1 hr. Assuming a similar rate of object characterization as reported in this paper, approximately 1230 NEOs need to be characterized in order to find 100 viable mission targets.

79 ASTRONOMY AND ASTROPHYSICS↗

Gene flow and introgression are pervasive forces shaping the evolution of bacterial species

Abstract Background Although originally thought to evolve clonally, studies have revealed that most bacteria exchange DNA. However, it remains unclear to what extent gene flow shapes the evolution of bacterial genomes and maintains the cohesion of species. Results Here, we analyze the patterns of gene flow within and between >2600 bacterial species. Our results show that fewer than 10% of bacterial species are truly clonal, indicating that purely asexual species are rare in nature. We further demonstrate that the taxonomic criterion of ~95% genome sequence identity routinely used to define bacterial species does not accurately represent a level of divergence that imposes an effective barrier to gene flow across bacterial species. Interruption of gene flow can occur at various sequence identities across lineages, generally from 90 to 98% genome identity. This likely explains why a ~95% genome sequence identity threshold has empirically been judged as a good approximation to define bacterial species. Our results support a universal mechanism where the availability of identical genomic DNA segments required to initiate homologous recombination is the primary determinant of gene flow and species boundaries in bacteria. We show that these barriers of gene flow remain porous since many distinct species maintain some level of gene flow, similar to introgression in sexual organisms. Conclusions Overall, bacterial evolution and speciation are likely shaped by similar forces driving the evolution of sexual organisms. Our findings support a model where the interruption of gene flow—although not necessarily the initial cause of speciation—leads to the establishment of permanent and irreversible species borders.

59 BASIC BIOLOGICAL SCIENCES↗

MODELING POROUS DUST GRAINS WITH BALLISTIC AGGREGATES. II. LIGHT SCATTERING PROPERTIES

We study the light scattering properties of random ballistic aggregates constructed in Shen et al. Using the discrete-dipole approximation, we compute the scattering phase function and linear polarization for random aggregates with various sizes and porosities, and with two different compositions: 100% silicate and 50% silicate +50% graphite. We investigate the dependence of light scattering properties on wavelength, cluster size, and porosity using these aggregate models. We find that while the shape of the phase function depends mainly on the size parameter of the aggregates, the linear polarization depends on both the size parameter and the porosity of the aggregates, with increasing degree of polarization as the porosity increases. Contrary to previous studies, we argue that the monomer size has negligible effects on the light scattering properties of ballistic aggregates, as long as the constituent monomer is smaller than the incident wavelength up to 2{pi}a {sub 0}/{lambda} {approx} 1.6 where a {sub 0} is the monomer radius. Previous claims for such monomer size effects are in fact the combined effects of size parameter and porosity. Finally, we present aggregate models that can reproduce the phase function and polarization of scattered light from the AU Mic debris disk and from cometary dust, including the negative polarization observed for comets at scattering angles 160 deg. {approx}< {theta} < 180 deg. These aggregates have moderate porosities, P{approx}0.6, and are of sub-{mu}m size for the debris disk case, or {mu}m size for the comet case.

79 ASTRONOMY AND ASTROPHYSICS↗

Hubbard model as an approximation to the entanglement in nanostructures

We investigate how well the one-dimensional Hubbard model describes the entanglement of particles trapped in a string of quantum wells. We calculate the average single-site entanglement for two particles interacting via a contact interaction and consider the effect of varying the interaction strength and the interwell distance. We compare the results with the ones obtained within the one-dimensional Hubbard model with on-site interaction. We suggest an upper bound for the average single-site entanglement for two electrons in M wells and discuss analytical limits for very large repulsive and attractive interactions. We investigate how the interplay between interaction and potential shape in the quantum-well system dictates the position and size of the entanglement maxima and the agreement with the theoretical limits. Finally, we calculate the spatial entanglement for the quantum-well system and compare it to its average single-site entanglement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of particle size and moisture on flow performance of loblolly pine anatomical fractions: Experimental findings and model predictions

The rising energy demand has highlighted biomass as a promising next-generation energy source. However, commercializing biomass-derived energy faces challenges, particularly in handling biomass feedstock. Factors like particle size, shape, moisture content, and surface roughness significantly impact biomass flowability. This study addresses a crucial knowledge gap by examining the effects of particle size and moisture content on the flow behavior and shear properties of different anatomical fractions of loblolly pine (Pinus taeda). The bulk shear behavior was examined using a Schulze ring shear tester, while flow performance was tested through gravity-driven flow experiments in a variable wedge-shape hopper. Results were incorporated into empirical and machine learning-based flow prediction models to evaluate their accuracy and limitations. The study found that samples with higher moisture content show higher unconfined yield strength. The critical arching distance increased with particle size, e.g., from approximately 13 and 33 mm for 2- and 6-mm whole chips, respectively at a 32-degree inclination angle. Conversely, the flow rate decreased for a given hopper opening as particle size increased. For instance, at a 60-mm hopper opening and a 32-degree inclination angle, the mass flow rates for 2- and 6-mm whole chips were 7.83 and 6.42 tonne/h, respectively. The empirical model consistently overpredicted the mass flow rate for all anatomical fractions, while the machine learning model more accurately predicted the central tendency of flow rate but was insensitive to varying tissue proportions. These novel findings provide comprehensive characterization of anatomical fractions, reveal significant combined effects of particle size and moisture content on biomass flow behavior, and demonstrate a better predictive accuracy of a machine learning model, all of which are useful for optimizing material handling strategies and biomass utilization technologies in the industry.

09 - BIOMASS FUELS↗

A Model for Turbulence Spectra in the Equilibrium Range of the Stable Atmospheric Boundary Layer

Stratification can cause turbulence spectra to deviate from Kolmogorov's isotropic -5/3 power law scaling in the universal equilibrium range at high Reynolds numbers. However, a consensus has not been reached with regard to the exact shape of the spectra. Here we propose a shape of the turbulent kinetic energy and temperature spectra in horizontal wavenumber for the equilibrium range that consists of three regimes at small Froude number: the buoyancy subrange, a transition region, and the isotropic inertial subrange through dimensional analysis and substantial revision of previous theoretical approximation. These spectral regimes are confirmed by various observations in the atmospheric boundary layer. The representation of the transition region in direct numerical simulations will require large-scale separation between the Dougherty-Ozmidov scale and the Kolmogorov scale for strongly stratified turbulence at high Reynolds numbers, which is still challenging computationally. In addition, we suggest that the failure of Monin-Obukhov similarity theory in the very stable atmospheric boundary layer is due to the fact that it does not consider the buoyancy scale that characterizes the transition region.

54 ENVIRONMENTAL SCIENCES↗

Criteria of radio-frequency ring-shaped hollow cathode discharge using H{sub 2} and Ar gases for plasma processing

In order to achieve high-density capacitively coupled plasma, a radio-frequency (RF) ring-shaped hollow cathode discharge has been developed as a candidate for processing plasma sources. The plasma density in the hollow cathode discharge reaches a high magnitude of 10{sup 10}-10{sup 11} cm{sup -3}. The RF ring-shaped hollow cathode discharge depends on the pressure and mass of the working gas. Criteria required for producing a RF ring-shaped hollow cathode discharge have been investigated for various gas pressures using H{sub 2} and Ar gases for high-density plasma production. The results reveal that the criteria for the occurrence of the hollow cathode effect are that the trench width should be approximately equal to the sum of the electron-neutral mean free paths and twice the sheath thickness of the RF powered electrode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gold Nanoparticles AuNP Decorated on Fused Graphene-like Materials for Application in a Hydrogen Generation

The search for a sustainable, alternative fuel source to replace fossil fuels has led to an increased interest in hydrogen fuel. This combustible gas is not only clean-burning but can readily be produced via the hydrolysis of sodium borohydride. The main drawback of this reaction is that the reaction occurs relatively slowly and requires a catalyst to improve efficiency. This study explored a novel composite material made by combining gold nanoparticles and fused graphene-like materials (AuFGLM) as a catalyst for generating hydrogen via sodium borohydride. The novel fused graphene-like material (FGLM) was made with a sustainable dextrose solution and by using a pressure-processing method. Imaging techniques showed that FGLM appears to be an effective support template for nanoparticles. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Raman spectroscopy were used to characterize and determine the size, shape, and structure of nanoparticles and composites. The TEM study characterized the fused carbon backbone as it began to take on a rounder shape. The TEM images also revealed that the average diameter of the gold nanoparticle was roughly 23 nm. The FTIR study confirmed O-H, C-C, and C=O as functional groups in the materials. The EDS analysis showed that the composite contained approximately 6.3% gold by weight. The crystal structures of FGLM and AuFGLM were identified via P-XRD analysis. Various reaction conditions were used to test the catalytic ability of AuFGLM, including various solution pHs, temperatures, and doses of NaBH 4 . It was observed that optimal reaction conditions included high temperature, an acidic solution pH, and a higher dose of NaBH 4 . The activation energy of the reaction was determined to be 45.5 kJ mol -1 , and it was found that the catalyst could be used multiple times in a row with an increased volume of hydrogen produced in ensuing trials. The activation energy of this novel catalyst is competitive compared to similar catalysts and its ability to produce hydrogen over multiple uses makes the material an exciting choice for catalyzing the hydrolysis of NaBH 4 for use as a hydrogen fuel source.

08 HYDROGEN↗

A structural framework for anomalous change detection and characterization

We present a spatially adaptive scheme for automatically searching a pair of images of a scene for unusual and interesting changes. Our motivation is to bring into play structural aspects of image features alongside the spectral attributes used for anomalous change detection (ACD). We leverage a small but informative subset of pixels, namely edge pixels of the images, as anchor points of a Delaunay triangulation to jointly decompose the images into a set of triangular regions, called trixels, which are spectrally uniform. Such decomposition helps in image regularization by simple-function approximation on a feature-adaptive grid. Applying ACD to this trixel grid instead of pixels offers several advantages. It allows: (1) edge-preserving smoothing of images, (2) speed-up of spatial computations by significantly reducing the representation of the images, and (3) the easy recovery of structure of the detected anomalous changes by associating anomalous trixels with polygonal image features. The latter facility further enables the application of shape-theoretic criteria and algorithms to characterize the changes and recognize them as interesting or not. This incorporation of spatial information has the potential to filter out some spurious changes, such as due to parallax, shadows, and misregistration, by identifying and filtering out those that are structurally similar and spatially pervasive. Our framework supports the joint spatial and spectral analysis of images, potentially enabling the design of more robust ACD algorithms.

99 GENERAL AND MISCELLANEOUS↗

Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Mechanical Performance of Dies

As a net shape process, die casting is intrinsically efficient and improvements in energy efficiency are strongly dependent on design and process improvements that reduce scrap rates so that more of the total consumed energy goes into acceptable, usable castings. A casting that is distorted and fails to meet specified dimensional requirements is typically remelted but this still results in a decrease in process yield, lost productivity, and increased energy consumption. This work focuses on developing, and expanding the use of, computer modeling methods that can be used to improve the dimensional accuracy of die castings and produce die designs and machine/die setups that reduce rejection rates due to dimensional issues. A major factor contributing to the dimensional inaccuracy of the casting is the elastic deformations of the die cavity caused by the thermo mechanical loads the dies are subjected to during normal operation. Although thermal and die cavity filling simulation are widely used in the industry, structural modeling of the die, particularly for managing part distortion, is not yet widely practiced. This may be due in part to the need to have a thorough understanding of the physical phenomenon involved in die distortion and the mathematical theory employed in the numerical models to efficiently model the die distortion phenomenon. Therefore, two of the goals of this work are to assist in efforts to expand the use of structural modeling and related technologies in the die casting industry by 1) providing a detailed modeling guideline and tutorial for those interested in developing the necessary skills and capability and 2) by developing simple meta-models that capture the results and experience gained from several years of die distortion research and can be used to predict key distortion phenomena of relevance to a die caster with a minimum of background and without the need for simulations. These objectives were met. A detailed modeling tutorial was provided to NADCA for distribution to the industry. Power law based meta-models for predicting machine tie bar loading and for predicting maximum parting surface separation were successfully developed and tested against simulation results for a wide range of machines and experimental data. The models proved to be remarkably accurate, certainly well within the requirements for practical application. In addition to making die structural modeling more accessible, the work advanced the state-of-the-art by developing improved modeling of cavity pressure effects, which is typically modeled as a hydrostatic boundary condition, and performing a systematic analysis of the influence of ejector die design variables on die deflection and parting plane separation. This cavity pressure modeling objective met with less than complete success due to the limits of current finite element based fluid structure interaction analysis methods, but an improved representation of the casting/die interface was accomplished using a combination of solid and shell elements in the finite element model. This approximation enabled good prediction of final part distortion verified with a comprehensive evaluation of the dimensions of test castings produced with a design experiment. An extra deliverable of the experimental work was development of high temperature mechanical properties for the A380 die casting alloy. The ejector side design objective was met and the results were incorporated into the metamodels described above. This new technology was predicted to result in an average energy savings of 2.03 trillion BTU's/year over a 10 year period. Current (2011) annual energy saving estimates over a ten year period, based on commercial introduction in 2009, a market penetration of 70% by 2014 is 4.26 trillion BTU's/year by 2019. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2020 is 0.085 Million Metric Tons of Carbon Equivalent (MM TCE).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗