Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Li{sub x}Co{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} electrode materials: Electrochemical and structural studies

Graphical abstract: Evolution of the c{sub hex.}/a{sub hex.} ratio with x in LiCo{sub 1−2x}Mn{sub x}Ni{sub x}O{sub 2} solid solution showing that less Li/Ni disorder is observed for x < 0.4. Highlights: ► LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} is a member of the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} solid solution. ► Structural refinement of this cathode material shows no Li/Ni disorder. ► The rhombohedral symmetry was preserved upon lithium removal. ► The discharge capacity reached more than 140 mAh/g at 2C rate and 160 mAh/g at 1C. -- Abstract: LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} layered oxide in a member of the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} solid solution between LiCoO{sub 2} and LiNi{sub 0.5}Mn{sub 0.5}O{sub 2}. Compositions from this solid solution have attracted much attention and have been extensively studied as promising cathode candidates to replace the most popular LiCoO{sub 2} cathode material used in the commercial lithium-ion batteries (LiBs). LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} positive electrode material was prepared via the combustion method followed by a thermal treatment at 900 °C for 12 h. This material was characterized by a high homogeneity and a granular shape. The Rietveld refinement evidenced that the structure of this compound exhibits no Ni/Li disorder revealing that the LiCo{sub 1−2x}Ni{sub x}Mn{sub x}O{sub 2} system presents the ideal structure for LiBs application when x < 0.4. The electrochemical performances of the LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} sample were measured at different current rates in the 2.7–4.5 V potential range. Its discharge capacity reached 178, 161 and 145 mAhg{sup −1} at C/20, 1C and 2C, respectively. Structural changes in LiCo{sub 0.4}Ni{sub 0.3}Mn{sub 0.3}O{sub 2} upon delithiation were studied using ex situ X-ray diffraction. A continuous solid solution with a rhombohedral symmetry was detected in the whole composition range. This structural stability during the cycling combined with the obtained electrochemical features make this material convenient for the LiBs applications.

36 MATERIALS SCIENCE↗

Characterizations and electrochemical performance of pure and metal-doped Li{sub 4}Ti{sub 5}O{sub 12} for anode materials of lithium-ion batteries

Pure and metal (Cu, Al, Sn, and V)-doped Li{sub 4}Ti{sub 5}O{sub 12} powders are prepared with solid-state reaction method. The effects of dopants on the physical and electrochemical properties are characterized by using TGA, XRD, and SEM. Compared with pure Li{sub 4}Ti{sub 5}O{sub 12}, metal-doped Li{sub 4}Ti{sub 5}O{sub 12} powders show structural stability and enhanced lithium ion diffusivity brought by doped metal ions. Voltage characteristics and initial charge–discharge characteristics according to the C rates in pure and metal-doped Li{sub 4}Ti{sub 5}O{sub 12} electrode materials are studied. Pure Li{sub 4}Ti{sub 5}O{sub 12} powder shows a relatively good discharge capacity of 164 mAh/g at a rate 0.2C, and some of metal-doped Li{sub 4}Ti{sub 5}O{sub 12} powders show higher discharge capacities. Metal-doped Li{sub 4}Ti{sub 5}O{sub 12} powders are promising candidates as anode materials for lithium-ion batteries.

36 MATERIALS SCIENCE↗

Net-structured Co{sub 3}O{sub 4}/C nanosheet array with enhanced electrochemical performance toward lithium storage

Graphical abstract: - Highlights: • Co{sub 3}O{sub 4}/C nanosheet array on nickel foam was synthesized by hydrothermal method, followed by magnetron sputtering of a carbon layer. • The Co{sub 3}O{sub 4}/C nanosheet array electrode delivers an initial discharge capacity of 1340.4 mAh g{sup −1} at 0.1 C. • After 100 cycles, the capacity retention of the Co{sub 3}O{sub 4}/C is 88.8% of its initial discharge capacity. • The enhanced electrochemical performances are attributed to the porous nanosheet array and the thin carbon layer coated on Co{sub 3}O{sub 4} nanosheets. - Abstract: Freestanding Co{sub 3}O{sub 4}/C nanosheet array growing directly on nickel foam substrate was synthesized using a hydrothermal approach, followed by a direct current magnetron sputtering of a thin carbon layer. The Co{sub 3}O{sub 4} nanosheets with thicknesses of 10–20 nm are interconnected with each other, forming a highly open net-structure. The Co{sub 3}O{sub 4}/C nanosheet array electrode delivers an initial discharge capacity of 1340.4 mAh g{sup −1} at 0.1 C, and maintains a high specific capacity of 912.1 mAh g{sup −1} at room temperature and can still remain 88.8% of its initial discharge capacity at 55 °C at 1 C after 100 cycles. The enhanced electrochemical performances are attributed to the porous nanosheet array and the thin carbon layer coated on Co{sub 3}O{sub 4} nanosheets, which cannot only facilitate Li{sup +} and electron transportation in the electrode, but also improve its structure stability during cycling.

36 MATERIALS SCIENCE↗

Nickel/carbon core/shell nanotubes: Lanthanum nickel alloy catalyzed synthesis, characterization and studies on their ferromagnetic and lithium-ion storage properties

Highlights: • Ni/CNTs core/shell structure was synthesized using LaNi{sub 5} alloy catalyst by CVD. • The magnetic and lithium-ion storage properties of Ni/CNTs structure were studied. • The specific Ni/CNTs structure shows strong ferromagnetic property with large coercivity value of 446.42 Oe. • Ni/CNTs structure shows enhanced electrochemical performance in terms of stable capacity and better rate capability. - Abstract: A method was developed to synthesize ferromagnetic nickel core/carbon shell nanotubes (Ni/CNTs) by chemical vapor deposition using Pauli paramagnetic lanthanum nickel (LaNi{sub 5}) alloy both as a catalyst and as a source for the Ni-core. The Ni-core was obtained through oxidative dissociation followed by hydrogen reduction during the catalytic growth of the CNTs. Transmission electron microscopy (TEM), selected area electron diffraction (SAED) and X-ray diffraction (XRD) analyses reveal that the Ni-core exists as a face centered cubic single crystal. The magnetic hysteresis loop of Ni/CNTs particle shows increased coercivity (446.42 Oe) than bulk Ni at room temperature. Furthermore, the Ni/CNTs core/shell particles were investigated as anode materials in lithium-ion batteries. The Ni/CNTs electrode delivered a high discharge capacity of 309 mA h g{sup −1} at 0.2 C, and a stable cycle-life, which is attributed to high structural stability of Ni/CNTs electrode during electrochemical lithium-ion insertion and de-insertion redox reactions.

36 MATERIALS SCIENCE↗

Structural phase transitions of ionic layered PbFX (X = Cl{sup −}or Br{sup –}) compounds under high pressure

The PbFX (X = Cl{sup –}or Br{sup –}) compounds crystallize in tetragonal structure with space group P4/nmm. High pressure X-ray diffraction studies carried out on PbFCl compound reveals that it undergoes pressure induced structural transitions at ∼18 GPa and ∼38 GPa to orthorhombic and monoclinic (P2{sub 1}/m) phases respectively. Like PbFCl, a similar phase transition from tetragonal to orthorhombic phase is observed in PbFBr at intermediate pressure. These phase transitions seem to be similar to the transitions involving other matlockite structure compounds such as BaFX (X = Cl{sup –}, Br{sup –}or I{sup –}). PbFCl has a larger structural stability range compared to BaFCl and is attributed to the large anisotropic coordination of the Pb{sup 2+} and Cl{sup –}ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Construction of ultrathin N-doped carbon shell on LiFePO{sub 4} spheres as enhanced cathode for lithium ion batteries

Graphical abstract: N-doped carbon (N-C) coated LiFePO{sub 4} spheres have been prepared by a facile one-step spray drying method and demonstrated with high capacity and good cycling life as cathode of lithium ion batteries. - Highlights: • Construct N-C shell on LiFePO{sub 4} as enhanced cathode for LIBs. • LiFePO{sub 4}/N-C cathodes show high capacity and good cycling life. • N-C shell structure is favorable for fast electron transfer. - Abstract: Developing advanced cathode is playing a crucial role in the advancement of lithium ion batteries (LIBs). In this work, we report a novel one-step spray drying method for fabrication of N-doped carbon (N-C) coated LiFePO{sub 4} spheres forming LiFePO{sub 4}/N-C spheres composite. Thin N-C layer of about 5 nm was coating on the surface of LiFePO{sub 4} spheres. The electrochemical properties of LiFePO{sub 4}/N-C spheres composite have been thoroughly studied as cathode of LIBs. The LiFePO{sub 4}/N-C spheres composite delivers discharge capacities of 160, 143 and 115 mAh g{sup −1} at 1 C, 5 C and 20 C, respectively, much better than unmodified LiFePO{sub 4} cathode. A high discharge capacity of 159 mAh g{sup −1} is preserved with 99% capacity retention after 1000 cycles at 1 C. The enhanced performance is due to the introduction of N-C shell with improved electrical conductivity and structural stability.

36 MATERIALS SCIENCE↗

Hierarchically branched TiO{sub 2}@SnO{sub 2} nanofibers as high performance anodes for lithium-ion batteries

Graphical abstract: Hierarchically heterostructured TiO{sub 2}@SnO{sub 2} core-branch nanofibers are synthesized with promising electrochemical performance as anodes for lithium-ion batteries. - Highlights: • TiO{sub 2}@SnO{sub 2} core-branch nanofibers are synthesized by a facile method. • The hybrid TiO{sub 2}@SnO{sub 2} nanofibers exhibt large capacity and good cycle performance. • The hybrid TiO{sub 2}@SnO{sub 2} nanofibers can be promising anode materials for lithium-ion batteries. - Abstract: Hierarchically heterostructured TiO{sub 2}@SnO{sub 2} core-branch nanofibers are synthesized by a facile method using electrospinning followed by a hydrothermal treatment. By carefully controlling the TiO{sub 2} content in the composite, a hierarchical heterostructure featuring uniform growth of rutile SnO{sub 2} nanocubes on the surface of anatase TiO{sub 2} nanofibers can be obtained. The hierarchically branched TiO{sub 2}@SnO{sub 2} nanofibers combine both advantages of SnO{sub 2} with large specific capacity and TiO{sub 2} with outstanding structural stability. The TiO{sub 2} content plays an important role in determining both the morphology and electrochemical performance of the composite. It is found that the TiO{sub 2}@SnO{sub 2} nanofibers with 30 wt% TiO{sub 2} exhibit both large specific capacity and good cycling stability, making them promising as anodes for high performance lithium-ion batteries.

36 MATERIALS SCIENCE↗

Gamma ray irradiation-induced variations in structure and optical properties of cerium/titanium-doped oxyfluoride transparent glass-ceramics

Highlights: • CeO{sub 2} favors CaF{sub 2} crystallization while TiO{sub 2} suppresses CaF{sub 2} crystallization. • Doping TiO{sub 2} helps reduce intrinsic coloring caused by CeO{sub 2}. • Doping CeO{sub 2} and/or TiO{sub 2} improves defects saturation over irradiation does. • Doping CeO{sub 2} allows lower radiation induced absorption coefficient than co-doping CeO{sub 2}/TiO{sub 2}. - Abstract: CeO{sub 2}/TiO{sub 2}-doped oxyfluoride transparent glass ceramics with a composition of 45SiO{sub 2}–20Al{sub 2}O{sub 3}–10CaO–25CaF{sub 2} were synthesized and irradiated by gamma ray. The effects of CeO{sub 2}/TiO{sub 2} on the structure and optical properties of the samples before and after irradiation were investigated. Doping with CeO{sub 2} causes network depolymerization and conversion of [AlO{sub 6}] to [AlO{sub 4}], enlarging the percolation region and promoting CaF{sub 2} crystallization. Co-doping with CeO{sub 2}/TiO{sub 2} helps reduce the intrinsic coloring of transparent glass ceramics containing only CeO{sub 2}, and the addition of TiO{sub 2} enhances network interconnectivity, suppressing CaF{sub 2} crystallization. Doping with CeO{sub 2} and/or TiO{sub 2} improves the structural stability of transparent glass ceramics upon irradiation and maintains the optical band gap and Urbach energy constant due to the defect saturation over the irradiation dose. Doping solely with CeO{sub 2} allows for a lower radiation-induced absorption coefficient than co-doping CeO{sub 2}/TiO{sub 2} because of the enhanced crystallization induced by CeO{sub 2} and balanceable light absorption of polyvalent cerium ions.

36 MATERIALS SCIENCE↗

Robust natural nanocomposites realizing unprecedented ultrafast precise molecular separations

Synthetic polymer membranes can potentially reduce the large energy and carbon footprints that are typically associated with traditional chemical separation technologies. Unfortunately, current production protocols negate the green benefits of membrane separation. To address this bottleneck, here we report the use of natural materials monosaccharide – glucose and polydopamine and Zr-based metal organic frameworks (MOFs) to fabricate ultrathin nanocomposite membranes via interfacial polymerization reaction. The synergistic effect of these three materials on angstrom-scale molecular transport both in organic solvent and aqueous environment was elucidated using a series of complementary techniques. We demonstrate such nature-inspired nanocomposite membranes enable structural stability even in polar aprotic solvents, and unparalleled ultra-fast, low-pressure, precise separations in both nanofiltration modes, which easily surpass state-of-the-art membranes relying on unsustainable materials. Finally, the multi-functionality of saccharide nanocomposites was elegantly harnessed to impact separation applications that contribute towards a better living environment.

36 MATERIALS SCIENCE↗

Preparation and electrochemical properties of high-entropy oxide Li x (CrMnCoNiZn) 3-x O 4

High-entropy oxides (HEOs) have gained significant attention as anode materials for lithium-ion batteries (LIBs) due to their high theoretical specific capacity, synergistic effects of constituent elements, and enhanced structural stability induced by high entropy. Here, this study investigates the electrochemical properties of a novel series of HEOs, Li x (CrMnCoNiZn) 3-x O 4 , synthesized via the sol-gel method. As lithium content increases, the electrochemical lithium storage performance of the HEOs improves, attributed to the rise in high-valence states and oxygen vacancies. The high valence state of elements facilitates greater electron transfer, enhancing the specific capacity during lithium insertion. Additionally, a higher concentration of oxygen vacancies boosts ionic conductivity and lithium ion diffusion kinetics, leading to superior electrochemical performance. Among the synthesized materials, Li 0.11 (CrMnCoNiZn) 2.89 O 4 exhibited the best performance, delivering a discharge capacity of 365 mAh·g −1 after 100 cycles at 100 mA·g −1 , 257 mAh·g −1 after 1000 cycles at 1 A·g −1 , and a rate capacity of 196 mAh·g −1 at 2 A·g −1 . The Li + diffusion coefficient reached 2.78 × 10 −15 cm 2 ·s −1 . This work not only deepens the understanding of HEOs' electrochemical behavior in LIBs but also provides insights into the impact of lithium ion substitution on their performance.

25 ENERGY STORAGE↗

Slug-flow synthesis of NCMA: Effect of substitution of cobalt with aluminum on the electrochemical performance of Ni-rich cathode for lithium-ion battery

Nickle-rich Li[Ni 1-x-y Co x Mn y ]O 2 (x, y≤0.1) (NCM) layered materials are known as promising cathode materials for next-generation lithium-ion batteries and electric vehicles owing to their high-reversible capacity and operating voltage of up to 3.6 vs Li/Li + . However, issues, such as irreversible phase transition, cation mixing, microcrack formation, thermal and structural stability of the material prevent its widespread adoption. Although, cation doping is a well-known technique to enhance the electrochemical performance of the NCM-based cathode material, the performance of the material is very sensitive to the doping amount. In this study, three Al-doped quaternary Ni-rich cathode materials Li[Ni 0.85 Co (0.1-x) Mn 0.05 Al x ]O 2 (where, x=0–0.04) (NCMA) are synthesized through three-phase slug-flow based continuous manufacturing process followed by high temperature calcination to study the effect of Aldoping on the performance of the cathode material while reducing Co. The slug flow-based production platform has several advantages, like particle size uniformity, high production rate, and homogeneity in elemental distribution. It is found that with an increase in Al content, the specific capacity decreases but the cyclic stability and rate capability increases. Furthermore, optimum Al-doping not only compensates for the adverse effect of low Co by decreasing the extent of cation mixing, but it also minimizes the electrode polarization and cracking of the particles.

25 ENERGY STORAGE↗

Superlattice-Structured Films by Magnetron Sputtering as New Era Electrodes for Advanced Lithium-ion Batteries

Sustaining sound structures in Si-based anodes is extremely challenging because of the high volumetric expansion that occurs upon cycling. To maintain high capacities over cycles, new designs rely on engineering-specific hierarchical geometries and/or optimized composite compositions such that at least one of the multiple elements serves as buffer and/or electron conductive pathways in the electrodes. In this paper, we report an innovative design in which alternating layers of periodic atomic structures involving multiple elements form a new anode material for lithium-ion batteries. In this work, a superlattice-structured amorphous film made using Si, Mo, and Cu is fabricated by a simple and scalable magnetron sputtering process for the first time. This continuous and repetitive superlattice formation along the film thickness provides a homogeneous stress-strain distribution. The Mo-Cu layer in the superlattice acts as an inactive-conductive layer and as a backbone to handle the volume expansion of active Si upon cycling. This nano-functional superlattice approach enables harnessing the high energy density of Si while maintaining its structural stability. As a result, the electrode exhibits high specific capacity and capacity retention even at high cycling rates. The possible use of the film in a full cell is also evaluated by cycling it vs. the LiMn 1.5 Ni 0.5 O 4 cathode. The full cell maintains a stable capacity of about 900 mAh g anode -1 over 150 cycles, at ~600 mA g -1 rate. The remarkable performance of this nano-functional superlattice film is found to be promising as anodes for applications that require high energy, long calendar life, and excellent abuse tolerance such as electric vehicle batteries.

25 ENERGY STORAGE↗

Construction of MoS 2 /NiS 2 heterostructure with fast interfacial reaction kinetics for ultrafast sodium storage

Constructing heterostructure is a valid method to reinforcing sodium storage performance of transition metal chalcogenides materials. Herein, a simple, safe and controllable one step hydrothermal method is proposed to synthesize MoS 2 /NiS 2 heterostructure. Due to the difference in band gaps and work functions of MoS 2 and NiS 2 , the charges are redistributed at the MoS 2 /NiS 2 heterointerfaces, thereby accelerating the migration of electrons and Na + . The heterointerfaces provide extra active sites for storing Na + , thus increasing the sodium storage capacity of the heterostructure. Furthermore, the distinct redox potentials of NiS 2 and MoS 2 promote the structural stability of MoS 2 /NiS 2 heterostructure during the electrochemical reaction processes. Consequently, the obtained MoS 2 /NiS 2 heterostructure exhibits superior rate properties (339.4 mAh g –1 at 10 A g –1 ) and ultra-stable cycling stability (480.5 mAh g –1 after 350 cycles at 1 A g –1 ). Finally, this paper presents a valid strategy for creating heterostructure anodes with excellent sodium storage properties.

25 ENERGY STORAGE↗

Status and performance of the GlueX DIRC

In support of the future physics program at Ce+BAF, we propose a prototype positron target. The prototype target consists of a tungsten disk mounted on a water-cooled copper support structure to enhance heat removal. The primary goals of this work are to benchmark CFD simulations, ensure vacuum integrity at the 10^-6 Pa level, achieve stable target rotation up to 10 Hz, and implement efficient water-based cooling for sustained high-power operation. To manage the thermal load, the target is designed to rotate, allowing the deposited heat to spread over a larger region, and thereby reducing localized thermal stress while maintaining the maximum temperature below 1000 K. To experimentally evaluate the thermal performance and structural stability of the target, we plan to conduct high-power laser heating tests at Laser Lab 5, LERF Building, JLab. These tests will serve as a stepping-stone for the positron production target at CEBAF.

Stevens, J.R. [College of William and Mary, Willia↗

Safety analysis of the FASt TEst reactor (FASTER) preconceptual design

Here, the FASt TEst Reactor (FASTER) plant is a sodium-cooled fast spectrum test reactor design that was developed as part of an advanced demonstration and test reactor study, and provides high levels of fast and thermal neutron flux for scientific research and development. The 120 MWe FASTER plant has been designed with extended testing capabilities in mind, while keeping the design as simple as possible in order to make it efficient and cost attractive. The main function of the reactor is to provide neutrons for irradiation testing utilizing existing proven technologies to ensure a high technology readiness level. A preliminary safety analysis was performed of the FASTER design using the fast reactor safety analysis code SAS4A/SASSYS-1 to assess the reactor's safety performance during beyond design basis accidents. Three types of transient scenarios were analyzed for the FASTER design: unprotected transient overpower, unprotected loss of heat sink, and unprotected station blackout. These transients were simulated at beginning of equilibrium cycle and end of equilibrium cycle conditions. For each transient, failures of both the primary and secondary reactor scram systems were assumed. Because of the favorable reactivity feedbacks, relatively low peak fuel, cladding, and coolant temperatures were obtained during the transients and the reactor vessel temperature remained well below the limit for ensuring structural stability.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Structural Optimization of a Direct-Drive Wind Turbine Generator Inspired by Additive Manufacturing

This study explores the structural freedom and design opportunities of additive manufacturing for a 5-MW direct-drive generator for a wind turbine and compares it to more traditional spoke-arm designs using NREL's GeneratorSE. The work focuses on light-weighting the stator within the generator, complementing previous rotor work. The light-weighting approach uses complex geometries and lattice structures made possible by additive manufacturing to realize increased strength with reduced mass. By reducing the mass at the top of the tower, wind turbines face lower loading along with decreased cost and improved structural stability. Furthermore, an altered bedplate support location facilitates lighter stator designs by better load transfer. Design optimization suggests additive manufacturing has the potential to transform generator designs to realize light-weighting. Since these machines are large, simulation and modeling are essential first steps before future experimental validation.

17 WIND ENERGY↗

Investigation on offshore wind turbine with an innovative hybrid monopile foundation: An experimental based study

The support structure for offshore wind turbines (OWTs) plays significant roles in maintaining the structural stability and reducing the initial cost. An innovative hybrid monopile foundation for OWTs is proposed. The concept has a wider adaptability by using established knowledge to solve for new problems. A series of centrifuge tests is performed to investigate the behavior of this hybrid foundation system in extreme and service conditions. OWTs with the original monopile foundation as well as the wheel-only foundations are tested for comparisons, and two clay profiles are considered. The test results show that the hybrid monopile foundation provides larger ultimate bearing capacities compared to the traditional foundations. Two analytical methods are proposed to estimate the ultimate bearing capacity of this innovative design, and the results are calibrated by the centrifuge tests. In service conditions, the hybrid monopile foundation shows stronger cyclic resistances. Influence factors of the cyclic responses are summarized. An analytical solution is put forward to estimate the accumulated lateral displacement of the hybrid monopile foundation. A degradation factor is suggested based on the results of the centrifuge tests. The study aims to enrich the understanding of the innovative foundation concept and to provide design references for practical applications.

17 WIND ENERGY↗

Surface-modified Li[Li 0.2 Ni 0.17 Co 0.07 Mn0.56]O 2 nanoparticles with MgF 2 as cathode for Li-ion battery

Li-rich layered materials hold lots of promise as cathode for next-generation high performance Li-ion batteries. Here, surface-modified layer-structured Li[Li 0.2 Ni 0.17 Co 0.07 Mn 0.56 ]O 2 (Li-rich) nanoparticles are employed as cathode for Li storage and transport studies. Moreover, our results demonstrate that 1 wt.% MgF 2 -modified Li-rich electrode exhibits the best cycling capability, with capacity retention ratio of 86% after 50 cycles, much higher than that of pristine one (only 66%). In the meantime, the 1 wt.% MgF 2 surface modified Li-rich electrode shows superior rate performance and thermal abuse treatments as well. Subsequent investigation indicates that the coated MgF 2 layer can suppress the undesirable growth of solid electrolyte interphase (SEI) film and enhance the structure stability upon cycling. Finally, this coating technique provides the potentially rewarding avenue towards the development of high capacity Li-ion cathodes.

25 ENERGY STORAGE↗