Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Factors influencing the ultrasonic stress wave factor evaluation of composite material structures

To demonstrate that the finite-element model can be used to investigate some of the factors influencing the ultrasonic stress wave evaluation of materials, a hypothetical case was studied in which classical vibration theory was used. Vibration analysis and experiments for the undamaged case were conducted on an isotropic aluminum plate and a unidirectional graphite-epoxy plate, using a point source to excite the plates. The finite-element solution correlated within eight percent with the exact method. The frequencies predicted by the finite-element model were observed in the experiments in both plates, although in the composite plate, additional frequencies were observed which could not be accounted for. Damaged isotropic plates were also considered. The effects of increasing damage severity with constant damage area, and increasing damage area with constant severity on the resonant frequencies were analyzed.

Rebello, C. J.↗

The relationship between ocean surface structure and the synthetic aperture radar imagery of ocean waves

The relationship between synthetic aperture radar (SAR) imagery of ocean waves and the ocean surface structure is discussed. The effects of ocean surface motion on SAR images is given. A generalization of conventional SAR correlation techniques is developed to provide imagery with the minimum possible degradation and distortion. The modeling of such imagery is discussed and an analytically tractable example given. Ongoing work towards the determination of the relevant components of surface microstructure is described. The future use of SAR phase information to supplement information obtainable from SAR imagery is suggested.

Evans, D. D.↗

Band Gaps for Elastic Wave Propagation in a Periodic Composite Beam Structure Incorporating Microstructure and Surface Energy Effects

Here, a new model for determining band gaps for elastic wave propagation in a periodic composite beam structure is developed using a non-classical Bernoulli–Euler beam model that incorporates the microstructure, surface energy and rotational inertia effects. The Bloch theorem and transfer matrix method for periodic structures are employed in the formulation. The new model reduces to the classical elasticity-based model when both the microstructure and surface energy effects are not considered. The band gaps predicted by the new model depend on the microstructure and surface elasticity of each constituent material, the unit cell size, the rotational inertia, and the volume fraction. To quantitatively illustrate the effects of these factors, a parametric study is conducted. The numerical results reveal that the band gap predicted by the current non-classical model is always larger than that predicted by the classical model when the beam thickness is very small, but the difference is diminishing as the thickness becomes large. Also, it is found that the first frequency for producing the band gap and the band gap size decrease with the increase of the unit cell length according to both the current and classical models. In addition, it is observed that the effect of the rotational inertia is larger when the exciting frequency is higher and the unit cell length is smaller. Furthermore, it is seen that the volume fraction has a significant effect on the band gap size, and large band gaps can be obtained by tailoring the volume fraction and material parameters.

36 MATERIALS SCIENCE↗

Structures generated in a temperature filament due to drift-wave convection

A simplified numerical study is made of the structures that are formed in a magnetized temperature filament due to oscillatory convection from large amplitude drift waves. This study is motivated by a recent experiment [D. C. Pace, M. Shi, J. E. Maggs et al., Phys. Plasmas 15, 122304 (2008)] in which Lorentzian-shaped temporal pulses are observed. These pulses produce a broadband, exponential frequency power spectrum. The model consists of an electron heat transport equation in which plasma convection arising from pressure-gradient driven drift-waves is included. It is found that above a critical wave amplitude, spatially complex structures are formed, which give rise to temporal pulses having positive and negative polarities at different radial positions. The temporal shape of the pulses can be fit by a Lorentzian function. The associated spatial structures exhibit temporally oscillatory heat plumes (positive polarity) and cold channels (negative polarity). The idealized effect of a static flow on these structures is explored. Depending on the flow direction (relative to the azimuthal propagation of the drift waves), the temporal Lorentzian pulses can be suppressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The vibration of a box-type structure. II - Response to a travelling pressure wave.

A finite element method is formulated for determining the transient response of a box-type structure to a traveling, arbitrarily shaped pressure wave. The method is illustrated by considering an example of practical concern - the sonic boom. The acceleration-time histories of a closed box are compared with those obtained experimentally from a simulated boom. Satisfactory agreement is obtained with only four rectangular elements per individual face and a simplified loading of the box.

Popplewell, N.↗

Impulsively generated sausage waves in coronal tubes with transversally continuous structuring

The frequency dependence of the longitudinal group speeds of trapped sausage waves plays an important role in determining impulsively generated wave trains, which have often been invoked to account for quasi-periodic signals in coronal loops. We examine how the group speeds (v{sub gr}) depend on angular frequency (ω) for sausage modes in pressureless coronal tubes with continuous transverse density distributions by solving the dispersion relation pertinent to the case where the density inhomogeneity of arbitrary form occurs in a transition layer of arbitrary thickness. We find that in addition to the transverse lengthscale l and density contrast ρ{sub i}/ρ{sub e}, the group speed behavior also depends on the detailed form of the density inhomogeneity. For parabolic profiles, v{sub gr} always decreases with ω first before increasing again, as happens for the much studied top-hat profiles. For linear profiles, however, the behavior of the ω−v{sub gr} curves is more complex. When ρ{sub i}/ρ{sub e}≲6, the curves become monotonical for large values of l. On the other hand, for higher density contrasts, a local maximum v{sub gr}{sup max} exists in addition to a local minimum v{sub gr}{sup min} when coronal tubes are diffuse. With time-dependent computations, we show that the different behavior of group speed curves, the characteristic speeds v{sub gr}{sup min} and v{sub gr}{sup max} in particular, is reflected in the temporal evolution and Morlet spectra of impulsively generated wave trains. We conclude that the observed quasi-periodic wave trains not only can be employed to probe such key parameters as density contrasts and profile steepness, but also have the potential to discriminate between the unknown forms of the transverse density distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

Snapping Shrimp Have Helmets That Protect Their Brains By Dampening Shock Waves

Shock waves are supersonic high-amplitude pressure waves that cause barotrauma when they transfer kinetic energy to the tissues of animals.1–4 Snapping shrimp (Alpheidae) produce shock waves and are exposed to them frequently, so we asked if these animals have evolved mechanisms of physical protection against them. Snapping shrimp generate shock waves by closing their snapping claws rapidly enough to form cavitation bubbles that release energy as an audible ‘‘snap’’ and a shock wave when they collapse.5–8 We tested if snapping shrimp are protected from shock waves by a helmet-like extension of their exoskeleton termed the orbital hood. Using behavioral trials, we found shock wave exposure slowed shelterseeking and caused a loss of motor control in Alpheus heterochaelis from which we had removed orbital hoods but did not significantly affect behavior in shrimp with unaltered orbital hoods. Shock waves thus have the potential to harm snapping shrimp but may not do so under natural conditions because of protection provided to shrimp by their orbital hoods. Using pressure recordings, we discovered the orbital hoods of A. heterochaelis dampen shock waves. Sealing the anterior openings of orbital hoods diminished how much they altered the magnitudes of shock waves, which suggests these helmet-like structures dampen shock waves by trapping and expelling water so that kinetic energy is redirected and released away from the heads of shrimp. Our results indicate orbital hoods mitigate blast-induced neurotrauma in snapping shrimp by dampening shock waves, making them the first biological armor system known to have such a function.

Alexandra C.N. Kingston↗

Nonlinear dynamics of resonant interactions between wave packets and particle distributions with loss-cone-like structures

The paper studies the nonlinear mechanisms at work in magnetized plasmas when wave packets interact resonantly with particle distributions presenting loss-cone-like structures. Lower hybrid waves are considered in view of the great importance, in space and laboratory plasmas, of waves with frequencies below the electron cyclotron frequency. Owing to a three-dimensional Hamiltonian model and a numerical symplectic code, the authors study the nonlinear stage of the loss-cone instability for various particle distributions and wave spectra involving symmetric and asymmetric features. In particular, the wave-particle interaction process of dynamical resonance merging, which results from an instability of the trapped particles' motion and leads to complex stochastic phenomena, is discussed. Whereas interactions at normal cyclotron resonances are mostly considered, the role of the Landau and the anomalous cyclotron resonances is also studied to explain thoroughly the nonlinear wave-particle dynamics as well as the competition between loss-cone, fan, and beam instabilities. The relaxed particle distributions and the saturated wave spectra are analyzed. The time necessary for filling the loss-cone structures is determined as a function of the characteristics of the particle distributions. Whereas most of the previous works analyzed the asymptotic stage of the system's evolution in the frame of the well-known quasilinear theory, the paper considers the case when the energy carried by the wave packet is sufficiently large so that the description of the physical processes at work cannot be limited to the frame of weak turbulence theories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response and characteristics of structures subjected to S-H waves

A study of the dynamic characteristics of a coupled translational-rotational system is given. The formulation of the problem considers the soil-structure interaction effects by utilizing the impedance functions at the foundation of a structure. Due to the fact that the coefficient matrix in the characteristic equation is frequency dependent in nature, iterations have to be performed to find the nature frequencies of the system. Examples and discussions are presented. Comparisons of the analytical results from various approaches are also given.

Wu, S. T.↗

Functional Magnon Network Blocks Based on Structures with Translational Symmetry Violation

We have studied the properties of spin-wave excitations in a structure that is a junction of two regular magnon waveguides. The proposed structure enables the transmission of spin-wave signals in an irregular structure in the propagation mode of a surface magnetostatic wave. Using the method of micromagnetic simulation, the characteristics of the wave process have been calculated when changing the structure parameters, magnitude and direction of a magnetization field. It is shown that a system with translational symmetry violation can be used to transmit a signal in three-dimensional configurations of magnon networks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE EFFECT OF VERTICAL TEMPERATURE GRADIENT ON THE PROPAGATION OF THREE-DIMENSIONAL WAVES IN A PROTOPLANETARY DISK

Excitation and propagation of waves in a thermally stratified disk with an arbitrary vertical temperature profile are studied. Previous analytical studies of three-dimensional waves had been focused on either isothermal or polytropic vertical disk structures. However, at the location in a protoplanetary disk where the dominant heating source is stellar irradiation, the temperature gradient may become positive in the vertical direction. We extend the analysis to study the effects of the vertical temperature structure on the waves that are excited at the Lindblad resonances. For a hotter disk atmosphere, the f-mode contributes less to the torque and remains confined near the midplane as it propagates away from the resonances. On the other hand, the excitation of the g-modes is stronger. As they propagate, they channel to the top of disk atmosphere and their group velocities decrease. The differences compared to previous studies may have implications in understanding the wave dynamics in a realistic disk structure.

79 ASTRONOMY AND ASTROPHYSICS↗

Tunable surface acoustic wave device using semiconducting MgZnO and piezoelectric NiZnO dual-layer structure on glass

Tunable surface acoustic wave (SAW) devices have attracted considerable interests due to its applications in emerging fields, such as secured wireless communication, adaptive signal processing, and smart sensing systems. We report a dual-input-voltage-controlled tunable SAW built on glass, which uses a ZnO-based dual-layer structure consisting of a piezoelectric Ni- doped ZnO (NZO) and semiconducting Mg-doped ZnO (MZO). The interdigital (IDT) electrodes are buried in the piezoelectric NZO layer to form the delay line for SAW propagation, while the semiconductor MZO layer serves as the channel of a thin film transistor (TFT) to modulate the conductivity. Results show the interface between MZO channel and SiO 2 gate dielectric layer of the TFTT significantly impacts on SAW tuning performances due to Zn diffusion from MZO into SiO 2 . The TFT-SAW device using an ultra-thin MgO layer as interface modification enables SAW frequency tuning of 0.53% under solely V gs control with 0–12 V. The required voltage range is significantly reduced compared regular MZO-NZO TFT-SAW counterpart (Δf/f c ~ 0.25%; V gs –30 to –14 V) without interface modification. With additional control of V ds , the SAW frequency tunability is further expanded from 0.46% to 0.63%. As a result, this dual-input voltage-controlled frequency tuning device on glass is promising for low-voltage, low-cost portable smart sensors and voltage-controlled reconfigurable radio-frequency identification tags.

36 MATERIALS SCIENCE↗

Reliability-based hull geometry optimisation of a point-absorber wave energy converter with power take-off structural reliability objectives

Recent studies have focused on optimising wave energy converter (WEC) designs, maximising their power performance and techno-economic feasibility. Reliability has yet to be fully considered in these formulations, despite its impact on cost and performance. In this study, this gap is addressed by developing a reliability-based design optimisation framework for WEC hull geometries to explore the trade-off between power performance and power take-off (PTO) system damage equivalent loading (DEL). Optimised hull geometries for two sites are considered (from the centre of the North Sea and off the west coast of Norway), and two directions of motions (heave and surge). Results indicate that site characteristics affect the potential power production and DEL for an optimal WEC design. These are also affected by the direction of motion for power extraction, which also significantly changes optimal hull shape characteristics. Optimal surging WEC designs have edges facing oncoming wave directions, while heaving WECs have pointed bottoms, both to streamline movement. Larger, more convex WECs result in greater power production and DEL, while smaller, more concave WECs result in lesser power production and DEL. These findings underline the importance of considering WEC hull geometry in early design processes to optimise cost, power production, and reliability.

16 TIDAL AND WAVE POWER↗

A combined three-dimensional finite element and scattering matrix method for the analysis of plane wave diffraction by bi-periodic, multilayered structures

A three-dimensional finite element method (FEM) for the analysis of plane wave diffraction by a bi-periodic slab is described and implemented. A scattering matrix formalism based on the FEM allows the efficient treatment of light reflection and transmission by multilayer bi-periodic structures, and the computation of Bloch modes of three-dimensional arrays. Numerical simulations, which show the accuracy and flexibility of the FEM, are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The 7 × 1 Fermi Surface Reconstruction in a Two-dimensional f -electron Charge Density Wave System: PrTe 3

The electronic structure of a charge density wave (CDW) system PrTe 3 and its modulated structure in the CDW phase have been investigated by employing ARPES, XAS, Pr 4 f RPES, and first-principles band structure calculation. Pr ions are found to be nearly trivalent, supporting the CDW instability in the metallic Te sheets through partial filling. Finite Pr 4 f spectral weight is observed near the Fermi level, suggesting the non-negligible Pr 4 f contribution to the CDW formation through the Pr 4 f -Te 5p hybridization. The two-fold symmetric features in the measured Fermi surface (FS) of PrTe 3 are explained by the calculated FS for the assumed 7 × 1 CDW supercell formation in Te sheets. The shadow bands and the corresponding very weak FSs are observed, which originate from both the band folding due to the 3D interaction of Te sheets with neighboring Pr-Te layers and that due to the CDW-induced FS reconstruction. The straight vertical FSs are observed along k z , demonstrating the nearly 2D character for the near-EF states. The observed linear dichroism reveals the in-plane orbital character of the near-E F Te 5p states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upper mantle structure of central and West Antarctica from array analysis of Rayleigh wave phase velocities

Abstract The seismic velocity structure of Antarctica is important, both as a constraint on the tectonic history of the continent and for understanding solid Earth interactions with the ice sheet. We use Rayleigh wave array analysis methods applied to teleseismic data from recent temporary broadband seismograph deployments to image the upper mantle structure of central and West Antarctica. Phase velocity maps are determined using a two–plane wave tomography method and are inverted for shear velocity using a Monte Carlo approach to estimate three‐dimensional velocity structure. Results illuminate the structural dichotomy between the East Antarctic Craton and West Antarctica, with West Antarctica showing thinner crust and slower upper mantle velocity. West Antarctica is characterized by a 70–100 km thick lithosphere, underlain by a low‐velocity zone to depths of at least 200 km. The slowest anomalies are beneath Ross Island and the Marie Byrd Land dome and are interpreted as upper mantle thermal anomalies possibly due to mantle plumes. The central Transantarctic Mountains are marked by an uppermost mantle slow‐velocity anomaly, suggesting that the topography is thermally supported. The presence of thin, higher‐velocity lithosphere to depths of about 70 km beneath the West Antarctic Rift System limits estimates of the regionally averaged heat flow to less than 90 mW/m 2 . The Ellsworth‐Whitmore block is underlain by mantle with velocities that are intermediate between those of the West Antarctic Rift System and the East Antarctic Craton. We interpret this province as Precambrian continental lithosphere that has been altered by Phanerozoic tectonic and magmatic activity.

Heeszel, David S.↗

The microphysics of particle acceleration in the auroral ionosphere: Why sounding rocket measurements are essential

Through the combination of attitude controlled, high altitude rockets (altitudes greater than 600 km), high telemetry rates (several megabits/sec), pitch angle imaging particle sensors and interferometric wave measurements giving wavelength in addition to frequency data, the series of TOPAZ flights have uncovered a low altitude acceleration mechanism by which ionospheric ions receive their initial energy transverse to B in order to leave the ionosphere and populate the trapped radiation. The transverse acceleration of oxygen and hydrogen ionospheric ions is the result of Landau resonance of these ions with intense (up to 400 mv/m) lower hybrid waves on the resonance cone within caviton structures. Future work is directed toward trying to measure the size of the solitary wave structures. From a statistical argument, they appear to be the order of 100 m across B and much longer in dimension along B. Important questions remain: are there other low altitude heating mechanisms acting as well; is the dayside ion outflow driven differently. To answer these questions, it is intended to make sounding rocket measurements in the cusp/cleft region. The proposed Norwegian rocket launch facility at Svalbard could play a very important role by providing easy access to the cusp/cleft region.

Arnoldy, Roger L.↗

Galactic astronomy; Proceedings of the Second Summer Institute for Astronomy and Astrophysics, State University of New York, Stony Brook, N.Y., June 19-July 17, 1968. Volumes 1 & 2.

Basic problems on the structure of our galaxy are presented. The essentially spiral structure of the galaxies is examined by a theory of the spiral shape, and by a study of the spiral structure with the 21-cm line of neutral hydrogen. Irregular spirals are discussed, and some problems that arise as a result of large deviations from the regular spiral structure are treated. The density wave theory of spiral structure is compared with the observed spiral structure of the galaxies. A section on the star migration technique, which is used to test the density wave theory of galactic spirals, is included. The interstellar medium is described in terms of such phenomena as supernova explosions and cosmic rays, both of which contribute to the energy balance of the medium. Other topics that are germaine to a description of the interstellar medium are the UV spectrum, kinematics of interstellar clouds, and ionization equilibrium. The implications of spiral galactic shock pattern on star formation along spiral arms are investigated, and by means of a blast wave model, it is shown that a hydrodynamic shock of galactic scale exists in galaxy M82.

Chiu, H.-Y.↗