Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Chemical factors controlling the behaviour of oxide cathodes in batteries

Oxide cathodes enable high-energy lithium-ion and sodium-ion batteries, with their performances fundamentally governed by three interrelated chemical factors: electronic configuration, chemical bonding, and chemical reactivity. Here, we illustrate how these factors dictate the redox energy, structural stability, ionic and electronic transport, and interfacial behavior in both layered oxide and polyanion oxide cathodes. We discuss how crystal-field effects and octahedral-site stabilization energies influence cation migration, and how inductive effects tune bond covalency and operating voltages. We also explain how chemical bonding governs thermal stability, gas evolution, and first-cycle capacity loss, and how alignment of transition-metal redox band with the oxygen 2p band determines electrolyte reactivity. Comparison between lithium and sodium layered oxides further reveals how differences in Li-O and Na-O bond ionicity affect chemical reactivity. Finally, we outline strategies including compositional tuning, surface doping, and electrolyte optimization, and emphasize how high-throughput, data-driven approaches in guiding the design of next-generation oxide cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Distinguishing photo-induced oxygen attack on alkyl chain versus conjugated backbone for alkylthienyl-benzodithiophene (BDTT)-based push–pull polymers

Synthetic design has enabled increasing power conversion efficiency advances in organic photovoltaics (OPV). One continuing knowledge gap is detailed understanding of single-material chemical (photo)stability. Many considerations are based on prior OPV-relevant donor homopolymer systems rather than the next-generation push–pull architectures. Generally, energetic offsets between the lowest occupied molecular orbital of the donor and molecular oxygen are assumed to dictate kinetics of photo-induced charge transfer to a super oxide radical. Herein we determine the ambient-induced photo-degradation pathways, presented as proposed site-specific arrow-pushing mechanisms, for five donor polymers all containing the same push unit – alkylthienyl-substituted-benzodithiophene (BDTT) – but with chemically distinct pull units. The donor-only polymer films were subject to controlled photobleaching in air as an accelerated degradation approach, coupled with simultaneous monitoring of absorptance. Sample subsets were periodically removed and analyzed with X-ray photoelectron spectroscopy, to evaluate near-surface chemical composition and oxygen additions to hetero reporter atoms on either the BDTT push unit or distinct pull unit (i.e., sulphur and nitrogen). Here, this methodology allows us to distinguish between different mechanisms of bond cleavage and formation. Overall, we find that neither polymer redox properties nor individual push or pull unit stability are sufficient to predict photo-oxidative degradation of these polymers. Rather, there is a greater dependence on the susceptibility of unique structural groups within a polymeric system. Alkyl chain oxygen addition is generally the first attack site and direct sulfur oxidation on the conjugated backbone occurs after saturation of the alkyl chain initiation sites. This work provides a standard that could be used to evaluate relative photo-oxidative (in)stability for new OPV materials quickly – prior to time-consuming device optimization – and demonstrates an effective methodology for correlating optical degradation with chemical structure alterations via spectroscopic signatures to guide synthetic design.

14 SOLAR ENERGY↗
DOE OSTI2020

Nb 3 Sn multicell cavity coating system at Jefferson Lab

Superconducting radio frequency niobium cavities are the building blocks of modern accelerators for scientific applications. Lower surface resistance, higher fields, and high operating temperatures advance the reach of the future accelerators for scientific discovery as well as potentially enabling cost-effective industrial solutions. We describe the design and performance of an Nb 3 Sn coating system that converts the inner surface of niobium cavities to an Nb 3 Sn film. The niobium surface, heated by radiation from the niobium retort, is exposed to Sn and SnCl 2 vapor during the heat cycle, which results in about 2 μm Nb 3 Sn film on the niobium surface. Film composition and structure as well as radio frequency properties with 1-cell R&D cavities and 5-cell practical accelerator cavities are presented.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Robust method for broadband efficiency enhancement of electron photocathodes using optical interferences

In this work, we demonstrate the key features of an interference cathode using both simulations and experiments. We deposit Cs 3 Sb photocathodes on Ag to produce an interference enhanced photocathode with 2–5× quantum efficiency (QE) enhancement using a robust procedure that requires only a smooth metal substrate and QE monitoring during growth. We grow both an interference cathode (Ag substrate) and a typical photocathode (Si reference substrate) simultaneously to confirm that the effects are due to optical interactions with the substrate rather than photocathode composition or surface electron affinity differences. Growing the cathodes until the QE converges shows both the characteristic interference peaks during growth and the identical limiting case where the cathode is “infinitely thick,” in agreement with simulations. We also grow a cathode until the QE on Ag peaks and then stop the growth, demonstrating broadband QE enhancement.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Electron Spectro-Microscopy (ESM) Beamline at NSLS-II

Photoelectron spectroscopy is a primary tool for the study of the electronic structure of materials and the chemical composition of surfaces. High-resolution angle-resolved photoemission spectroscopy (ARPES) has the unique ability to map the energy bands in momentum space. Furthermore, going beyond the single particle picture, the self-energy corrections caused by correlations in solids can be extracted from the analysis of the emission line shape. The current level of refinement, in terms of energy and angular resolution (ΔE < 1 meV, Δθ < 0.1°), makes the technique sensitive to the lowest energy excitations and the dynamics of electrons, which in turn virtually determine all the macroscopic properties of any system and govern the chemical, electrical, magnetic, and physical processes. Similarly important, X-ray photoelectron microscopy (XPEEM), combined with the low-energy electron microscopy (LEEM), is indispensable in probing the complexity of chemical, structural, electronic and magnetic properties of surfaces and shallow interfaces, with the spatial resolution of few tens of nanometer (nm). The Electron-Spectro-Microscopy beamline (ESM) has been recently commissioned at NSLS-II and is now in operation. The primary spectroscopic technique is photoemission, performed over a wide energy range with control of light polarization and in a variety of flux/resolution conditions. The beamline has two experimental end stations that allow to perform ARPES and XPEEM/LEEM, separately. The ARPES end station focuses on high energy-resolution work, with spot-size of a few microns. The XPEEM/LEEM end station is a full-field microscope (XPEEM) operating either with the synchrotron generated X-rays (XPEEM), or with an internal electron gun (LEEM). Spatial resolution is crucial in studies of newly synthesized complex materials since they are often initially available only as small specimens (typically micron size). Furthermore, chemical inhomogeneities on surfaces are often an integral part of surface chemical processes. Finally, the ESM beamline with X-ray spots of few microns is optimized to study the electronic structure of novel materials with microscopy capabilities.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Impact of PrsA on membrane lipid composition during daptomycin-resistance-mediated β-lactam sensitization in clinical MRSA strains

Abstract Background The cyclic anionic lipopeptide daptomycin is used in the treatment of severe infections caused by Gram-positive pathogens, including MRSA. Daptomycin resistance, although rare, often results in treatment failure. Paradoxically, in MRSA, daptomycin resistance is usually accompanied by a concomitant decrease in β-lactam resistance in what is known as the ‘see-saw effect’. This resensitization is extensively used for the treatment of MRSA infections, by combining daptomycin and a β-lactam antibiotic, such as oxacillin. Objectives We aimed: (i) to investigate the combined effects of daptomycin and oxacillin on the lipid composition of the cellular membrane of both daptomycin-resistant and -susceptible MRSA strains; and (ii) to assess the involvement of the post-translocational protein PrsA, which plays an important role in oxacillin resistance in MRSA, in membrane lipid composition and remodelling during daptomycin resistance/β-lactam sensitization. Results The combination of microbiological and biochemical studies, with fluorescence microscopy using lipid probes, showed that the lipid composition and surface charge of the daptomycin-resistant cells exposed to daptomycin/oxacillin were dependent on antibiotic concentration and directly associated with PrsA, which influenced cardiolipin remodelling/relocation. Conclusions Our findings show that PrsA, in addition to its post-transcriptional role in the maturation of PBP 2a, is a key mediator of cell membrane remodelling connected to the see-saw effect and may have a key role in the resensitization of daptomycin-resistant strains to β-lactams, such as oxacillin.

de Carvalho, Carla C. C. R.↗
DOE OSTI2018

Effect of Laser Irradiation on the PTCR Behavior of Semiconducting Barium Strontium Titanate Ceramics

This paper examines the effect of pulsed laser irradiation on the electrical properties of n-type semiconductor ferroelectric ceramics (based on a (Ba,Sr)TiO{sub 3} solid solution) with a planar contact configuration. The elemental compositions and surface morphologies of the material before and after laser irradiation are compared using scanning electron microscopy data. In the framework of the well-known Heywang model for the positive temperature coefficient of resistance effect, we calculate the resistance of the material as a function of temperature for the paraelectric phase and determine parameters of grain boundaries that ensure good agreement between the experimental data and theoretical curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Investigation of the Current–Voltage Characteristics of New MnO{sub 2}/GaAs(100) and V{sub 2}O{sub 5}/GaAs(100) Heterostructures Subjected to Heat Treatment

Complex oxide films with a thickness of about 200 nm are formed during the thermal oxidation of GaAs with magnetron-deposited V{sub 2}O{sub 5} and MnO{sub 2} nanolayers. The electrical parameters of the films (reverse-bias breakdown voltage and current density) are determined by the method of current–voltage (I–V) characteristics at room temperature in the bias range from –5 to +5 V, and their composition and surface morphology are investigated. It is shown that V{sub 2}O{sub 5} facilitates the more intense (in comparison with MnO{sub 2}) chemical bonding of arsenic at the internal interface with the formation of As{sub 2}O{sub 5}. As a result, thermally oxidized V{sub 2}O{sub 5}/GaAs heterostructures exhibit higher breakdown voltages.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Electron Microscopy and Elemental Composition of the Near-Surface Layer of Electron-Irradiated LiF Crystals

Electron microscopy and optical vibrational spectroscopy techniques have been used to study Li nanoparticles formed on the cleaved surface of lithium fluoride (LiF) crystals irradiated by 4-MeV electron beam to a total fluence of 5 × 10{sup 16} cm{sup –2}. It is suggested that ionization accompanying this intense irradiation leads to radiolysis of the target and removal of fluorine from interblock boundaries, where lithium cations are collected and mutually oriented to form microwires. This functional surface may be of practical interest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Effects of physical, chemical, and biological ageing on the mineralization of pine wood biochar by a Streptomyces isolate

If biochar is to be used for carbon (C) management, we must understand how weathering or ageing affects biochar C mineralization. Here, we incubated aged and unaged eastern white pine wood biochar produced at 350 and 550°C with a Streptomyces isolate, a putative biochar-decomposing microbe. Ageing was accelerated via three different processes, namely, (a) physical ageing–subjecting biochar to alternating freeze-thaw and wet-dry cycles, (b) chemical ageing–treating biochar with concentrated hydrogen peroxide and (c) biological ageing–incubating biochar in the presence of nutrients and microorganisms. Elemental composition and surface chemistry (Fourier Transform Infrared spectroscopy) of biochar samples were compared before and after ageing. Biochar C mineralization between ageing treatments was significantly different in the case of 350°C biochar ( p value = 0.03). Among the 350°C biochars, physical ageing resulted in the greatest increase (by 103%) in biochar C mineralization ( p value = 0.05). However, in the case of 550°C biochar, ageing did not result in a significant change in biochar C mineralization ( p value = 0.40). Biochar C mineralization was positively correlated with an increase in O/C ratio post-ageing ( r s = 0.86, p value = 0.01). In the case of 350°C biochar, surface oxidation during ageing enhanced biochar degradation by the isolate. For 550°C biochar, however, ageing did not significantly increase biochar C mineralization, likely due to high condensed aromatic C content and lower surface oxidation during ageing. The results from our study suggest that low temperature aged biochar is more susceptible to biological degradation by soil microbes. These findings have implications for the use of biochar for long term C storage in soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Transient Spectroscopy of Glass-Embedded Perovskite Quantum Dots: Novel Structures in an Old Wrapping

Semiconductor doped glasses had been used by the research and engineering communities as color filters or saturable absorbers well before it was realized that their optical properties were defined by tiny specs of semiconductor matter known presently as quantum dots (QDs). Nowadays, the preferred type of QD samples are colloidal particles typically fabricated via organometallic chemical routines that allow for exquisite control of QD morphology, composition and surface properties. However, there is still a number of applications that would benefit from the availability of high-quality glass-based QD samples. These prospective applications include fiber optics, optically pumped lasers and amplifiers and luminescent solar concentrators (LSCs). In addition to being perfect optical materials, glass matrices could help enhance stability of QDs by isolating them from the environment and improving heat exchange with the outside medium. We conduct optical studies of a new type of all-inorganic CsPbBr 3 perovskite QDs fabricated directly in glasses by high-temperature precipitation. These samples are virtually scattering free and exhibit excellent waveguiding properties which makes them well suited for applications in, for example, fiber optics and LSCs. However, the presently existing problem is their fairly low room-temperature emission quantum yields of only ca. 1%–2%. Here we investigate the reasons underlying the limited emissivity of these samples by conducting transient photoluminescence (PL) and absorption measurements across a range of temperatures from 20 to 300K. We observe that the low-temperature PL quantum yield of these samples can be as high as ~25%. However, it quickly drops (in a nearly linear fashion) with increasing temperature. Interestingly, contrary to traditional thermal quenching models, experimental observations cannot be explained in terms of a thermally activated nonradiative rate but rather suggest the existence of two distinct QD sub-ensembles of “emissive” and completely “nonemissive” particles. The temperature-induced variation in the PL efficiency is likely due to a structural transformation of the QD surfaces or interior leading to formation of extremely fast trapping sites or nonemissive phases resulting in conversion of emissive QDs into nonemissive. Thus, future efforts on improving emissivity of glass-based perovskite QD samples might focus on approaches for extending the range of stability of the low-temperature highly emissive structure/phase of the QDs up to room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Concrete Inspection in Remote Areas with Robotic Arms

The use of non-destructive examination (NDE) to assess the conditions of concrete structures has received extensive attention in recent years. NDE analysis techniques are used to evaluate the properties of materials and to ensure the integrity of structures without causing damages to them. NDE inspection is often performed manually by certified technicians, however in remote and high hazard environments this is impossible or undesirable for human safety. Development of remote and robotic technologies to perform these essential inspections is of interest to the DOE EM complex due to its aging infrastructure and hazardous environments. This goal of this seedling was to develop techniques to remotely examine inaccessible concrete structures and to evaluate results collected remotely to those obtained by human hand. Additionally, two promising state of the art NDE instruments were identified to be used for the characterization to include the new Proceq Ground Penetrating Radar (GPR) which generates results in 3D using Augmented Reality. A test bed was built to develop and evaluate deployment techniques of the NDE instruments with a robotic arm. Concrete test forms simulating the rough concrete surfaces, strength, composition and potential structural defects that can be found at our DOE EM facilities were built for the examination. Initial NDE instrumentation data collection has been performed on the concrete test forms.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Structure and Voltage Recovery Driven by Defects Elimination in Li-Rich Layered Oxide Cathode Materials

Lithium-ion batteries (LIBs) are ubiquitous in a wide range of technologies, including cell phones, electric vehicles, and energy grid, and are indispensable in the transition toward sustainable energy technology. The battery performance is inherently connected to the capability of lithium ions to reversibly intercalate with the electrodes. The capacity of classical layered transition metal (TM) oxides, the primary commercial cathode materials, is limited to cationic redox activity. Anionic redox has thus emerged as a new paradigm for designing novel cathodes for next generation LIBs. It is recently confirmed oxygen redox in lithium-rich layered oxides (LRLO) with composition xLi 2 MnO 3 ∙(1-x)LiTMO 2 , which enables this group of materials exhibit reversible capacities exceeding 280 mAh g -1 . Unfortunately, this material undergoes voltage fading and instability that is rooted in irreversible structural transformation in terms of defects formation including lithium and oxygen vacancies, lithium tetrahedron, TM migration, edge dislocations, stacking fault, and local strain. Modification methods including morphology control, composition gradient, surface treatment, foreign elements doping, etc., have been proposed in the literatures to mitigate the defects formation and maintain the structure reversibility. Despite their improvement, the intrinsic voltage fading is still inevitable and remains a challenge that will require considerable effort to overcome. In this work, we demonstrate a path to recover the layer structure and working voltage through high-temperature annealing. The treatment at high temperature recovers the local Li-excess environments around oxygen, oxygen stacking sequence, and eliminates microstrain associated with different defects. As a result, the voltage profile once more shows plateau region during charge and the average discharge voltage is restored of the cycled cathode after heat treatment. Both theoretical calculations and experimental characterizations illustrate the mechanisms underlying the heating induced recovery. The structure metastability and defects removal are decisive in structure and voltage recovery of LRLO cathode material.

Zhang, Minghao↗
DOE OSTI2021

Highly Ordered Hierarchical Anodes for Extreme Fast Charging Batteries (Final Report)

The goal of this project is to enable extreme fast charging (XFC) of Li-ion batteries, which was accomplished through a combination of 1) rational design and manufacturing of hierarchically structured anode architectures; 2) blending graphite/hard carbon into a bulk hybrid anode; 3) engineering artificial solid-electrolyte interphase (SEI) coatings with reduced interphase impedance; 4) computational modeling of coupled transport, kinetic, and electrochemical phenomena; and 5) improved fundamental understanding of lithium plating through operando analysis. This work integrated structural, compositional, and surface modification of graphite anodes, multi-physics modeling of ion transport, electrochemical activity, and heat transfer, advanced strategies to detect Li plating, and semi-automated roll-to-roll cell assembly. The unique facilities at the University of Michigan (UM) and Sandia National Laboratories (SNL) were leveraged to manufacture, prototype, and characterize commercially relevant >2Ah and >180 Wh/kg cells with a target of <20% capacity fade over 500 XFC cycles.

25 ENERGY STORAGE↗
DOE OSTI2023

Abstract for CRADA between NETL and the University of Massachusetts Lowell (AGMT-1275)

The demand for printed electronics over conventional electronics is growing each year due to their low costs, low material waste during manufacturing, and compatibility with flexible substrates. The development of inks for printed electronics is a challenge because each printing technology requires different viscosities and curing behaviors to create devices with controlled structures at the micron scale, or smaller. Carbon is a great candidate for fabricating printed electronics devices because it is inexpensive and earth abundant, easily functionalized to impart miscibility with solvent systems, and has electrical properties that can be tuned from insulating to conducting. Despite these advantages, carbons are rarely used for printed electronics because there is a scarcity of inks available for non-contact printing technologies. To address these challenges, the National Energy Technology Laboratory (NETL) will collaborate with the University of Massachusetts Lowell (Participant) through its Printed Electronics Research Collaborative (PERC) to develop engineered carbons and ink formulations optimized specifically for printing radio- and microwave-frequency electronic devices using ink jet, aerosol jet, syringe dispensing, and other additive manufacturing techniques. NETL will process coal, petroleum, and other carbon feedstocks to make engineered carbons with the appropriate composition, microstructure, surface functionalization, and particle morphologies needed to stabilize ink suspensions and impart useful electronic properties to printed devices. The University of Massachusetts Lowell will utilize these engineered carbons to determine which solvent systems and ink additives are needed to achieve the appropriate viscosity, stability, and printability to make useful ink formulations. The University of Massachusetts Lowell will then utilize these inks to manufacture printed resistors and conductors using inkjet, aerosol jet, and syringe dispensing printing methods and will characterize device performance using four-point probe resistivity measurements, contact angle measurements to assess wettability, adhesion evaluation to various substrates, and focused ion beam and scanning electron microscopy for surface and density investigations of printed devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Functionalization of nitrogen vacancy-containing nanodiamonds with a metal-organic framework for quantum sensing applications

Nitrogen vacancy (NV)-containing nanodiamonds (NDs) are an important material in applications such as biological imaging, catalysis, and, in particular, quantum sensing. Careful manipulation of the surface coating on NV NDs is essential for both enhancing quantum sensor performance and for tuning selectivity towards specific sensing targets. Here, we demonstrate a simple synthetic approach for functionalizing NV NDs with the zeolitic imidazole framework-8 (ZIF-8) metal–organic framework (MOF), providing a well-ordered, porous scaffold for immobilizing target analytes near the NV ND surface. The composites were structurally characterized by x-ray diffraction, electron microscopy, and X-ray photoelectron spectroscopy, and these results were all consistent with NV NDs fully encapsulated by ZIF-8. Critically, the luminescent properties of the NV NDs, which are vital for quantum sensing experiments such as optically detected magnetic resonance (ODMR), are unchanged by the MOF coating. Moreover, spin relaxometry experiments indicate that the ZIF-8 coating significantly enhances the NV ND spin longitudinal relaxation time T1, a critical quantum parameter for sensing applications. Given the tremendous structural diversity of MOFs, the NV ND@MOF composites are an exciting material class with exciting implications for the development of high-performance quantum sensors.

Crawford, Scott↗
DOE OSTI2024

Optimizing the combustion synthesis of FeAlxOy catalysts for microwave-assisted thermocatalytic dehydrogenation of fossil fuels

The growing demand for hydrogen requires the development of clean and energy-efficient technologies for its synthesis. Microwave-assisted thermocatalytic dehydrogenation of fossil fuels has demonstrated the potential to produce H2 with high yield and selectivity, and simultaneously generate valuable nanostructured carbon byproducts. In prior work, iron-based alumina (FeAlxOy) catalysts for this process were made via solution combustion synthesis (SCS). However, the effect of SCS parameters on the dehydrogenation performance is not well understood. The present study investigates this by varying the SCS fuel, Fe:Al molar ratio, and heating mode. The results show subtle changes of these parameters can result in significant differences in the phase composition, specific surface area, and microwave absorbing properties of FeAlxOy, which all affect microwave-assisted dehydrogenation. Notably, H2 selectivity can be increased from 30% to 74%. Statistical testing determined that the SCS fuel used was the most significant SCS parameter affecting dehydrogenation performance.

Chanoi, Zachary A.↗